Author Topic: [GB] LZ St : Shipping  (Read 25848 times)

0 Members and 1 Guest are viewing this topic.

Offline futurecrime

  • Posts: 186
  • Location: London, England
Re: [GB] LZ St : Invoice sent
« Reply #100 on: Tue, 16 May 2017, 11:45:06 »
Just out of curiosity caused by the assembly post, are the PCB's for the group buy pre-soldered with resistors, diodes, LED's?

From OP: "Full SMT(pre-soldered Device, Diodes, Resistors)"

Offline Mr_BeastQuake

  • Posts: 312
  • Location: Oregon
    • Reddit
Re: [GB] LZ St : Invoice sent
« Reply #101 on: Tue, 16 May 2017, 11:54:28 »
To salvage some face, I did read first post! Just not that line :P somehow...

Online Goon

  • Posts: 16
  • Location: Canada
Re: [GB] LZ St : Invoice sent
« Reply #102 on: Tue, 16 May 2017, 11:55:09 »
Paid. waiting on CLS now ST :(

Offline merintil

  • Posts: 36
Re: [GB] LZ St : Invoice sent
« Reply #103 on: Tue, 16 May 2017, 12:25:36 »
If my address changes before production ends, can I request to have my order sent to a different address?

I am most likely moving sometime in July/August.

Online LifeZ

  • Thread Starter
  • Posts: 375
  • LifeZone
Re: [GB] LZ St : Invoice sent
« Reply #104 on: Tue, 16 May 2017, 18:49:55 »
CLS, St include pcb.
Diodes, Resistors and RGB Leds(For underglow) is pre soldered.

Offline Elrick

  • Hype Master
  • Posts: 4882
  • Location: CrapTown, Convict Settlement
  • Keyboard Orgasmist
Re: [GB] LZ St : Invoice sent
« Reply #105 on: Tue, 16 May 2017, 19:31:41 »
that's a really good assembly price.  I'll be using it if I ever join a GB, just not a small form factor user

Same here I usually buy lots of 104 keyed monster's but after a while you get bored always getting the aircraft carrier sized keyboards.

This little baby is for myself to use it helps to concentrate my usage on less keys instead of always being surrounded with tonnes of extra keys to press.

Looking forward to this one mainly because it will be an all purpose built keyboard for me to use, all I have to do is supply the key-caps and plug it into my PC.

Online LifeZ

  • Thread Starter
  • Posts: 375
  • LifeZone
Re: [GB] LZ St : Invoice sent
« Reply #106 on: Wed, 17 May 2017, 01:25:34 »
If my address changes before production ends, can I request to have my order sent to a different address?

I am most likely moving sometime in July/August.
Sure, no worries!  :D

Online ryptide11

  • Posts: 62
Re: [GB] LZ St : Invoice sent
« Reply #107 on: Wed, 17 May 2017, 04:08:33 »
My switch plate is blank. Please make it STS. Will it change my invoice price?

Online LifeZ

  • Thread Starter
  • Posts: 375
  • LifeZone
Re: [GB] LZ St : Invoice sent
« Reply #108 on: Wed, 17 May 2017, 04:12:00 »
oh..add sts plate.
no change your invoice price.

Online ryptide11

  • Posts: 62
Re: [GB] LZ St : Invoice sent
« Reply #109 on: Wed, 17 May 2017, 06:30:34 »
Paid. Thank you.

Offline merintil

  • Posts: 36
Re: [GB] LZ St : Invoice sent
« Reply #110 on: Wed, 17 May 2017, 09:23:26 »
If my address changes before production ends, can I request to have my order sent to a different address?

I am most likely moving sometime in July/August.
Sure, no worries!  :D

Excellent, thank you very much!

Offline NealCaffery

  • Posts: 3
  • Location: Australia
Re: [GB] LZ St : Invoice sent
« Reply #111 on: Sun, 21 May 2017, 07:18:24 »
I have paid the invoice, but the chart doesn't update yet. Also, Can I ask for an additional assembly?

Offline Unforgivable

  • Posts: 466
Re: [GB] LZ St : Invoice sent
« Reply #112 on: Sun, 28 May 2017, 01:23:39 »
LifeZ,

The Order Check spreadsheet has changed since the last time I saw it..it's very messy and inaccurate now. I didn't order a stainless steel switch plate. :( 

Can you please confirm that the below is my order? I already paid for it.

1xRed LZ ST
(With Red aluminum switch plate, PCB included)
1x Brass weight
1xDiffuser

1x Extra PCB
1x Extra Red Aluminum switch plate

Thank you very much!

To everyone else, I would make sure your order is correct. Let's hope LifeZ will fix the spreadsheet. :(

Offline Cocopah

  • Posts: 257
  • Location: Socal
  • Lurker Extraordinaire
Re: [GB] LZ St : Invoice sent
« Reply #113 on: Sun, 28 May 2017, 01:52:45 »
LifeZ,

The Order Check spreadsheet has changed since the last time I saw it..it's very messy and inaccurate now. I didn't order a stainless steel switch plate. :( 

Can you please confirm that the below is my order? I already paid for it.

1xRed LZ ST
(With Red aluminum switch plate, PCB included)
1x Brass weight
1xDiffuser

1x Extra PCB
1x Extra Red Aluminum switch plate

Thank you very much!

To everyone else, I would make sure your order is correct. Let's hope LifeZ will fix the spreadsheet. :(

That happened to me when I was on mobile, it was acting weird. It's normal on desktop though.

Offline Unforgivable

  • Posts: 466
Re: [GB] LZ St : Invoice sent
« Reply #114 on: Sun, 28 May 2017, 02:55:16 »
LifeZ,

The Order Check spreadsheet has changed since the last time I saw it..it's very messy and inaccurate now. I didn't order a stainless steel switch plate. :( 

Can you please confirm that the below is my order? I already paid for it.

1xRed LZ ST
(With Red aluminum switch plate, PCB included)
1x Brass weight
1xDiffuser

1x Extra PCB
1x Extra Red Aluminum switch plate

Thank you very much!

To everyone else, I would make sure your order is correct. Let's hope LifeZ will fix the spreadsheet. :(

That happened to me when I was on mobile, it was acting weird. It's normal on desktop though.

Hey Coco!

You're 100% right! I just checked it on a PC and it was accurate!

So strange how it doesn't show up the same way on mobile.

Please disregard my previous statement, LifeZ! Apologies for any confusion I may have caused, and a big thanks to Coco for a swift answer! :)

Offline Cocopah

  • Posts: 257
  • Location: Socal
  • Lurker Extraordinaire
Re: [GB] LZ St : Invoice sent
« Reply #115 on: Sun, 28 May 2017, 03:23:54 »
 :thumb:

Online ryptide11

  • Posts: 62
Re: [GB] LZ St : Invoice sent
« Reply #116 on: Sun, 28 May 2017, 21:34:12 »
I got an email from paypal on 19 May that my keyboard has shipped.

Is this correct?

Online LifeZ

  • Thread Starter
  • Posts: 375
  • LifeZone
Re: [GB] LZ St : Invoice sent
« Reply #117 on: Sun, 28 May 2017, 23:20:11 »
I got an email from paypal on 19 May that my keyboard has shipped.

Is this correct?
A little problem.
It happened because of a small issue in my PayPal account.
I will send PM.

Offline Elrick

  • Hype Master
  • Posts: 4882
  • Location: CrapTown, Convict Settlement
  • Keyboard Orgasmist
Re: [GB] LZ St : Invoice sent
« Reply #118 on: Mon, 29 May 2017, 20:37:34 »
I got an email from paypal on 19 May that my keyboard has shipped.

Is this correct?
A little problem.
It happened because of a small issue in my PayPal account.
I will send PM.

It was a surprise even for me because normally your cases do not come out this quickly, not even Varmilo works this fast in making keyboards and shipping them that quickly.

Please take your time here, we want PERFECTION with every keyboard made and I know your standards are way higher than most others here on GH Central  8) .

Offline Elrick

  • Hype Master
  • Posts: 4882
  • Location: CrapTown, Convict Settlement
  • Keyboard Orgasmist
Re: [GB] LZ St : Production
« Reply #119 on: Fri, 04 August 2017, 19:23:16 »
Dear LZ,

Last time I chimed in it was May and it's now August, so what is happening....... ?

Very eager in finding out the progress of this keyboard and I know the others here in this Group Buy are just as curious.

Online LifeZ

  • Thread Starter
  • Posts: 375
  • LifeZone
Re: [GB] LZ St : Production
« Reply #120 on: Sun, 06 August 2017, 02:52:07 »
Hello everyone,


This group buy is for a LZ St


IC thread
https://geekhack.org/index.php?topic=88607.0

Detail

Order deadline 2017-05-05  -> 2017-05-12

Order check 2017-05-13 ~ 05-17

Invoice start 2017-05-13

Payment deadline 2017-05-20

Production 12 ~ 16 weeks from 2017-05-25 2017-06-08
-----------------------------------------------------------
Order here

Order check
======================================================
(Attachment Link)
(Attachment Link)
======================================================

No letter on the weight plate.
letter on bottom case.

LZ St letter on thr weight plate. (update, 5/10)

======================================================
Specifications:
Aluminum case
11 degree angled
Aluminum n Stainless steel Switch plate
Brass or STS Weight
Support ISO + ANSI
PCB: L3 LEEKU PCB
Fully Programmable
Full LED backlighting
Full SMT(pre-soldered Device, Diodes, Resistors)

-------------------------------------------------

Case Colors:
Black
SILVER
RED


Switch Plate:
Alu (RED)
STS (Stainless Steel)

Weight Plate:
Brass
STS (Stainless Steel)

Basic kit 1 set of include 1 pcb, 1 Weight plate, 1 Switch plate and TOP&BOT Case

-------------------------------------------------

Additional Parts:
PCB Mount Cherry Stabz(1kit) : Cherry genuine / winkey (6.25x-1ea, 2x-3ea)
Extra PCB
Extra Switch plate
Extra Weight plate

-------------------------------------------------

Price:(excluding paypal fees and shipping)

Basic kit : $396 (Case, Switch plate, Weight plate, PCB)


Shipping:
Different depending on Order Option
1 set(Box) of weights : about 3.5kg
EMS shipping Price (1set) with Tracking number
Asia : $30
EU, Canada : $55
Usa : $65

-------------------------------------------------

The PCB is Designed/Developed by Leeku
The PCB is Programmed with JigOn firmware : http://kbdlab.co.kr/index.php?mid=board_sw&document_srl=2702787

-------------------------------------------------
support lay-out
(Attachment Link)

==================================================
8/6 update.
Case CNC : 70%
alu, sts plate : 100%
pcb : re-testing
 

Online ihalatch

  • Posts: 297
  • Location: Adelaide, Australia
Re: [GB] LZ St : Production
« Reply #121 on: Sun, 06 August 2017, 09:10:02 »
Hi Lz, I can't see the acrylic diffuser in my order. I ordered one. Can you please check my order? Is it too late to order an extra switch plate?
« Last Edit: Sun, 06 August 2017, 09:11:38 by ihalatch »

Offline Elrick

  • Hype Master
  • Posts: 4882
  • Location: CrapTown, Convict Settlement
  • Keyboard Orgasmist
Re: [GB] LZ St : Production
« Reply #122 on: Sun, 06 August 2017, 19:40:32 »
Hello everyone,


This group buy is for a LZ St
==================================================
8/6 update.
Case CNC : 70%
alu, sts plate : 100%
pcb : re-testing


Nice one LZ, it's a shame you have to spend so much time on the [GB] LZ CLS   >:D .

I really hope they will appreciate all the effort you've gone through to complete their orders, to your own highest standard  8) .

Really looking forward to your LZ St keyboard.
« Last Edit: Sun, 06 August 2017, 19:43:05 by Elrick »

Online LifeZ

  • Thread Starter
  • Posts: 375
  • LifeZone
Re: [GB] LZ St : Production
« Reply #123 on: Sun, 06 August 2017, 19:51:26 »
Hi Lz, I can't see the acrylic diffuser in my order. I ordered one. Can you please check my order? Is it too late to order an extra switch plate?

There is no problem with the order. Please check again.
and only extra  alu plate add.

Online LifeZ

  • Thread Starter
  • Posts: 375
  • LifeZone
Re: [GB] LZ St : Production
« Reply #124 on: Sun, 06 August 2017, 19:53:03 »
Hello everyone,


This group buy is for a LZ St
==================================================
8/6 update.
Case CNC : 70%
alu, sts plate : 100%
pcb : re-testing


Nice one LZ, it's a shame you have to spend so much time on the [GB] LZ CLS   >:D .

I really hope they will appreciate all the effort you've gone through to complete their orders, to your own highest standard  8) .

Really looking forward to your LZ St keyboard.

i see.
Time was delayed due to the large quantity and the problem of anodizing.
I'm trying.

Online boo

  • Posts: 230
Re: [GB] LZ St : Production
« Reply #125 on: Sun, 06 August 2017, 20:50:37 »
Hello everyone,


This group buy is for a LZ St
==================================================
8/6 update.
Case CNC : 70%
alu, sts plate : 100%
pcb : re-testing


Nice one LZ, it's a shame you have to spend so much time on the [GB] LZ CLS   >:D .

I really hope they will appreciate all the effort you've gone through to complete their orders, to your own highest standard  8) .

Really looking forward to your LZ St keyboard.

i see.
Time was delayed due to the large quantity and the problem of anodizing.
I'm trying.

Thank you LZ!


Sent from my iPhone using Tapatalk

Offline Captainbuttmonkey

  • Posts: 155
  • Location: UK
Re: [GB] LZ St : Production
« Reply #126 on: Mon, 07 August 2017, 18:19:21 »
Hi LZ, the order check doesn't seem to have any case marked for me? I'm assuming this was just missed by mistake, I believe I ordered a red one. Many thanks

Online LifeZ

  • Thread Starter
  • Posts: 375
  • LifeZone
Re: [GB] LZ St : Production
« Reply #127 on: Thu, 17 August 2017, 08:45:18 »
==================================================
8/17 update.
Case CNC : 90%
alu, sts plate : 100%
pcb : re-testing
brass weight : 20%
176087-0
176089-1
176091-2
176093-3

Online smittysteve

  • Posts: 371
  • Location: Tucson, AZ
  • Tea > Coffee. Clack > Thwock.
Re: [GB] LZ St : Production
« Reply #128 on: Thu, 17 August 2017, 11:30:52 »
==================================================
8/17 update.
Case CNC : 90%
alu, sts plate : 100%
pcb : re-testing
brass weight : 20%
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)

Thanks for the update, LZ- getting very excited for this board!!

Offline aaron6301

  • Posts: 461
  • Location: Orange County, CA
  • Pixel Pusher
Re: [GB] LZ St : Production
« Reply #129 on: Thu, 17 August 2017, 11:50:38 »
==================================================
8/17 update.
Case CNC : 90%
alu, sts plate : 100%
pcb : re-testing
brass weight : 20%
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)

Thanks for the update, LZ- getting very excited for this board!!

You and I both, my friend  :thumb:

Offline Elrick

  • Hype Master
  • Posts: 4882
  • Location: CrapTown, Convict Settlement
  • Keyboard Orgasmist
Re: [GB] LZ St : Production
« Reply #130 on: Thu, 17 August 2017, 21:24:35 »
==================================================
8/17 update.
Case CNC : 90%
alu, sts plate : 100%
pcb : re-testing
brass weight : 20%

You are the ONLY person in any Group Buy that says so little, yet provides relevant info on your progress  8) .

LZ is the one and only when it comes to delivering any of his designs on time and on budget.

That is why it's always good to join his GBs without question, when he presents them  :thumb: .
« Last Edit: Thu, 17 August 2017, 21:26:52 by Elrick »

Offline megaforce93

  • Posts: 469
  • Location: Tucson, AZ
Re: [GB] LZ St : Production
« Reply #131 on: Thu, 17 August 2017, 22:40:38 »
==================================================
8/17 update.
Case CNC : 90%
alu, sts plate : 100%
pcb : re-testing
brass weight : 20%

You are the ONLY person in any Group Buy that says so little, yet provides relevant info on your progress  8) .

LZ is the one and only when it comes to delivering any of his designs on time and on budget.

That is why it's always good to join his GBs without question, when he presents them  :thumb: .

Love me some Elrick words of wisdom  :thumb: :thumb: :thumb:

Offline futurecrime

  • Posts: 186
  • Location: London, England
Re: [GB] LZ St : Production
« Reply #132 on: Fri, 25 August 2017, 17:57:33 »
Is there any chance of getting one of those nice carry cases like I'm seeing in the CLS thread? Like Kin's ones but with the LZ zips.

Offline Unforgivable

  • Posts: 466
Re: [GB] LZ St : Production
« Reply #133 on: Fri, 25 August 2017, 17:58:40 »
If we get a nice protective bag with the LZ ST, I'll scream with joy!!!  ;)
« Last Edit: Fri, 25 August 2017, 18:11:57 by Unforgivable »

Online ihalatch

  • Posts: 297
  • Location: Adelaide, Australia
Re: [GB] LZ St : Production
« Reply #134 on: Fri, 25 August 2017, 18:57:35 »
If we get a nice protective bag with the LZ ST, I'll scream with joy!!!  ;)

+1
That'd be awesome

Offline futurecrime

  • Posts: 186
  • Location: London, England
Re: [GB] LZ St : Production
« Reply #135 on: Sat, 26 August 2017, 02:22:26 »
I pm'd LZ.  No case for St.  :(  But we still get a great keyboard though eh.

Offline Elrick

  • Hype Master
  • Posts: 4882
  • Location: CrapTown, Convict Settlement
  • Keyboard Orgasmist
Re: [GB] LZ St : Production
« Reply #136 on: Sat, 26 August 2017, 20:44:48 »
I pm'd LZ.  No case for St.  :(  But we still get a great keyboard though eh.

You bet but I think LZ made a mistake for providing the CLS crew with a carrying case and not providing one for this true "portable" styled keyboard.

Even if he offers a nice carry case for this ultra-fine keyboard model, I would still fork out more moolah for it easily.

Supreme keyboards such as the St need their carrying case, just like hand guns, cameras or jewellery  8) .

Offline Elrick

  • Hype Master
  • Posts: 4882
  • Location: CrapTown, Convict Settlement
  • Keyboard Orgasmist
Re: [GB] LZ St : Production
« Reply #137 on: Mon, 28 August 2017, 20:02:55 »
Just read what LZ posted in his CLS GB  :o .

That was why he provided an 'extra', which was the keyboard bag to help alleviate anyone's concern for the expanded timeline of his keyboard.

If it helps here, would be glad in just getting this keyboard but I am not stopping you at all if you decide to put in an 'extra' like a keyboard carry bag (being greedy)  8) .

Won't cry if it doesn't happen because he always delivers on his keyboards, especially with his own style and quality.

Offline Mr_BeastQuake

  • Posts: 312
  • Location: Oregon
    • Reddit
Re: [GB] LZ St : Production
« Reply #138 on: Wed, 30 August 2017, 00:43:38 »
me want

Online LifeZ

  • Thread Starter
  • Posts: 375
  • LifeZone
Re: [GB] LZ St : Production
« Reply #139 on: Thu, 31 August 2017, 19:21:01 »
-------------------------------------------------------
update. 2017.09.01
PCB final test passed
Start anodizing next week
177274-0

Offline Puddsy

  • Foreman of the salt mine
  • * Exalted Elder
  • Posts: 6293
  • Location: Amherst, MA or New York, NY
  • i paid a lewd art man money to draw this avatar
Re: [GB] LZ St : Production
« Reply #140 on: Thu, 31 August 2017, 21:49:54 »
-------------------------------------------------------
update. 2017.09.01
PCB final test passed
Start anodizing next week
(Attachment Link)

Nice!

Is that and LZ-GT I see?
QFR (62g blacks) | MJ2 TKL | Realforce 87U | G81-3000 "Schumiboard" | Varmilo Bulgogiboard (Keycon 104) | KBD75 (MX silent blacks) | MIRA (soon!)

ahh, thanks puddsy. can always count on your snarky informitism

Add me on Steam | Add me on Battle.net: Puddsy#1914 | /u/Puddsy

Online LifeZ

  • Thread Starter
  • Posts: 375
  • LifeZone
Re: [GB] LZ St : Production
« Reply #141 on: Thu, 31 August 2017, 23:16:28 »
-------------------------------------------------------
update. 2017.09.01
PCB final test passed
Start anodizing next week
(Attachment Link)

Nice!

Is that and LZ-GT I see?

Yes. GT!!

Offline Elrick

  • Hype Master
  • Posts: 4882
  • Location: CrapTown, Convict Settlement
  • Keyboard Orgasmist
Re: [GB] LZ St : Production
« Reply #142 on: Fri, 01 September 2017, 00:34:00 »
-------------------------------------------------------
update. 2017.09.01
PCB final test passed
Start anodizing next week

NICE, good to see this keyboard still going to spec with no problems  :thumb: .

Offline rasmusx

  • Posts: 53
  • Location: Estonia
Re: [GB] LZ St : Production
« Reply #143 on: Fri, 01 September 2017, 04:06:54 »
-------------------------------------------------------
update. 2017.09.01
PCB final test passed
Start anodizing next week
(Attachment Link)
Nice! Thanks for the update :)

Online LDobler

  • Posts: 233
  • Location: Austria
Re: [GB] LZ St : Production
« Reply #144 on: Sun, 17 September 2017, 04:39:00 »
Pretty damn hyped for this puppy! :p

Any updates LZ?

Cheers

Online LifeZ

  • Thread Starter
  • Posts: 375
  • LifeZone
Re: [GB] LZ St : Production
« Reply #145 on: Sun, 17 September 2017, 07:22:57 »

Extra MX Switch Plate
(Transparent polycarbonate plate  1.5mm)

It is some Burr. It is common.
It is not a defective product.
178482-0

Order
http://naver.me/GQFTjLvd

Online ihalatch

  • Posts: 297
  • Location: Adelaide, Australia
Re: [GB] LZ St : Production : Extra PC plate Order now
« Reply #146 on: Sun, 17 September 2017, 08:06:56 »
Ordered.

Offline aaron6301

  • Posts: 461
  • Location: Orange County, CA
  • Pixel Pusher
Re: [GB] LZ St : Production : Extra PC plate Order now
« Reply #147 on: Sun, 17 September 2017, 11:23:53 »
Ordered

Sent from my SAMSUNG-SM-G925A using Tapatalk


Offline Elrick

  • Hype Master
  • Posts: 4882
  • Location: CrapTown, Convict Settlement
  • Keyboard Orgasmist
Re: [GB] LZ St : Production
« Reply #148 on: Mon, 18 September 2017, 05:45:14 »

Extra MX Switch Plate
(Transparent polycarbonate plate  1.5mm)

It is some Burr. It is common.
It is not a defective product.
(Attachment Link)

Order
http://naver.me/GQFTjLvd

YES the burr exists due to having both sides of the polycarbonate covered in a clear plastic sheet.  The sheet is there to protect the polycarbonate from any scratches BUT it's a pain to use lazers with.

We had some pieces cut many years ago and it left rough edges on any polycarbonate sheet but it leaves silky smooth cuts on Carbon Steel and Ceramics.

Offline mmdango

  • Posts: 43
  • Location: California, US
Re: [GB] LZ St : Production : Extra PC plate Order now
« Reply #149 on: Tue, 19 September 2017, 14:40:14 »
I would love carrying case to go with this guy :]