Author Topic: [GB] Lightsaver V3 Kustom Keyboard - All Shipped!  (Read 146336 times)

0 Members and 1 Guest are viewing this topic.

Offline onlinelife

  • Posts: 44
  • Location: Canada
Re: [GB] Lightsaver V3 Kustom Keyboard - First 20 Shipped
« Reply #600 on: Mon, 23 October 2017, 20:08:38 »
Just received mine, the packaging is great. Doesn't look like there are any issues with the top or bottom portion of the case.

However, the underside of the SS plate seem to be burned on mine. Anyone else has there like that?

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11518
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] Lightsaver V3 Kustom Keyboard - First 20 Shipped
« Reply #601 on: Mon, 23 October 2017, 20:12:57 »
Just received mine, the packaging is great. Doesn't look like there are any issues with the top or bottom portion of the case.

However, the underside of the SS plate seem to be burned on mine. Anyone else has there like that?

Burned?

Pic?
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice (lost in mail T_T)

if you're actually reading other people's posts on geekhack in 2020 you're doing something wrong

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos | "Is Linkshine our Nixon?" -NAV (fk u)

Offline Atredl

  • Posts: 804
  • Location: SoCal
Re: [GB] Lightsaver V3 Kustom Keyboard - First 20 Shipped
« Reply #602 on: Mon, 23 October 2017, 20:18:49 »
Just received mine, the packaging is great. Doesn't look like there are any issues with the top or bottom portion of the case.

However, the underside of the SS plate seem to be burned on mine. Anyone else has there like that?
Itís most likely from the laser cutting but a picture would help to see if itís out of the norm.

Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 5261
  • Location: United Kingdom
Re: [GB] Lightsaver V3 Kustom Keyboard - First 20 Shipped
« Reply #603 on: Mon, 23 October 2017, 20:43:23 »
Just received mine, the packaging is great. Doesn't look like there are any issues with the top or bottom portion of the case.

However, the underside of the SS plate seem to be burned on mine. Anyone else has there like that?

SS plates have always been a bit hit and miss from Duck. My Octagon V2 has this, and a lot of scratches.

Offline yookwh

  • Posts: 117
Re: [GB] Lightsaver V3 Kustom Keyboard - First 20 Shipped
« Reply #604 on: Mon, 23 October 2017, 23:09:42 »
Can someone who received his/her board comment on whether it is hotlite compatible, and let us know which hotlite you're using?  :thumb:

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11518
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] Lightsaver V3 Kustom Keyboard - First 20 Shipped
« Reply #605 on: Mon, 23 October 2017, 23:15:08 »
Can someone who received his/her board comment on whether it is hotlite compatible, and let us know which hotlite you're using?  :thumb:

i heard from a korean user that it is not
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice (lost in mail T_T)

if you're actually reading other people's posts on geekhack in 2020 you're doing something wrong

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos | "Is Linkshine our Nixon?" -NAV (fk u)

Offline yookwh

  • Posts: 117
Re: [GB] Lightsaver V3 Kustom Keyboard - First 20 Shipped
« Reply #606 on: Mon, 23 October 2017, 23:18:29 »
Well that's a bummer

Offline onlinelife

  • Posts: 44
  • Location: Canada
Re: [GB] Lightsaver V3 Kustom Keyboard - First 20 Shipped
« Reply #607 on: Tue, 24 October 2017, 02:00:09 »
Just received mine, the packaging is great. Doesn't look like there are any issues with the top or bottom portion of the case.

However, the underside of the SS plate seem to be burned on mine. Anyone else has there like that?

Burned?

Pic?

Will take a picture tomorrow. I already re-packed it away until I build it tomorrow.

Offline kawasaki161

  • Posts: 1059
  • Location: Germany
Re: [GB] Lightsaver V3 Kustom Keyboard - First 20 Shipped
« Reply #608 on: Tue, 24 October 2017, 02:28:51 »
Just received mine, the packaging is great. Doesn't look like there are any issues with the top or bottom portion of the case.

However, the underside of the SS plate seem to be burned on mine. Anyone else has there like that?

Burned?

Pic?

Will take a picture tomorrow. I already re-packed it away until I build it tomorrow.

Those burn marks should be normal as the plate is lasered and not refinished on that site.

Offline elton5354

  • Thread Starter
  • Posts: 2210
  • Location: Canada
Re: [GB] Lightsaver V3 Kustom Keyboard - First 20 Shipped
« Reply #609 on: Tue, 24 October 2017, 07:53:26 »
Burn marks on the underside of SS plates are normal. For those who received your boards, please check your PCB to make sure it fully works. I've had many contact me after the fact months or years later mentioning that there are issues. As mentioned in the OP, I can only guarantee damages/defective items for 7 days from the day you receive the items.

On another note, I've advised Duck that the packages that were received are in good order. Now we wait for the remainder of the first batch :).

Edit:

Remaining first 30 are ready to go and will ship today! ;D
« Last Edit: Tue, 24 October 2017, 07:55:58 by elton5354 »

Offline gizmoplex

  • Posts: 29
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #610 on: Tue, 24 October 2017, 08:02:18 »
Now to the Jetfire IC/GB pleeease... ;D

Online LightningXI

  • * Elevated Elder
  • Posts: 3291
  • Location: New York
  • PPD
    • ArtisanMacro
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #611 on: Tue, 24 October 2017, 08:05:06 »
Burn marks on the underside of SS plates are normal. For those who received your boards, please check your PCB to make sure it fully works. I've had many contact me after the fact months or years later mentioning that there are issues. As mentioned in the OP, I can only guarantee damages/defective items for 7 days from the day you receive the items.

On another note, I've advised Duck that the packages that were received are in good order. Now we wait for the remainder of the first batch :).

Edit:

Remaining first 30 are ready to go and will ship today! ;D
Woohoo!!

What is the timeline looking like for the second 50? Have they also entered production?

Sent from my SM-G935T using Tapatalk

WANTED: Clacks, Artisans, Keysets, Vintage Cherry and Other Goodies

More
Quickfire Pro | TADA 68 | Novatouch | Whitefox | Duck Octagon v1 | Duck Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Triumvitek Weaven | M65-A | TARO EXENT | Wooden Planck | Tokyo60 | Duck Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84 | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84b | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | TGR x SINGA UNIKORN | IBM 3278 (pending restoration) | KFE | TGR Jane v2 | TGR Jane v2 CE | Koala | iS0 | Norbatouch | KPad | Xeno | F62 Kishsaver | Polaris | Montage |


Offline hpfalcon

  • Posts: 31
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #612 on: Tue, 24 October 2017, 08:15:44 »
what are steps to check pcb without assembling? For my last build, it didnt seem to recognize my board until I had everything soldered

Offline Oblotzky

  • Posts: 1845
  • Location: Cologne, Germany
  • Backspace is for people that make mistakes.
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #613 on: Tue, 24 October 2017, 08:36:27 »
Burn marks on the underside of SS plates are normal. For those who received your boards, please check your PCB to make sure it fully works. I've had many contact me after the fact months or years later mentioning that there are issues. As mentioned in the OP, I can only guarantee damages/defective items for 7 days from the day you receive the items.

On another note, I've advised Duck that the packages that were received are in good order. Now we wait for the remainder of the first batch :).

Edit:

Remaining first 30 are ready to go and will ship today! ;D
Woohoo!!

What is the timeline looking like for the second 50? Have they also entered production?

Sent from my SM-G935T using Tapatalk

They are done producing too, as far as I understand they just need to be packed up too for shipping

20 orders are shipped and tracking is up for them. The rest will be shipped shortly after.  All lightsavers are produced and ready. It won't take much longer for the 2nd batch to ship out.

Also, once the first 20 that received theirs, can you please open the box carefully and check whether or not the air cushions that they used for the new packaging are still in tact?

Thanks.

Offline avid

  • Posts: 772
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #614 on: Tue, 24 October 2017, 08:37:47 »
Burn marks on the underside of SS plates are normal. For those who received your boards, please check your PCB to make sure it fully works. I've had many contact me after the fact months or years later mentioning that there are issues. As mentioned in the OP, I can only guarantee damages/defective items for 7 days from the day you receive the items.

On another note, I've advised Duck that the packages that were received are in good order. Now we wait for the remainder of the first batch :).

Edit:

Remaining first 30 are ready to go and will ship today! ;D
Woohoo!!

What is the timeline looking like for the second 50? Have they also entered production?

Sent from my SM-G935T using Tapatalk

Elton said on last page "All lightsavers are produced and ready. It won't take much longer for the 2nd batch to ship out."

Online LightningXI

  • * Elevated Elder
  • Posts: 3291
  • Location: New York
  • PPD
    • ArtisanMacro
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #615 on: Tue, 24 October 2017, 08:38:15 »
HOOOOOO BOY

Sent from my SM-G935T using Tapatalk

WANTED: Clacks, Artisans, Keysets, Vintage Cherry and Other Goodies

More
Quickfire Pro | TADA 68 | Novatouch | Whitefox | Duck Octagon v1 | Duck Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Triumvitek Weaven | M65-A | TARO EXENT | Wooden Planck | Tokyo60 | Duck Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84 | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84b | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | TGR x SINGA UNIKORN | IBM 3278 (pending restoration) | KFE | TGR Jane v2 | TGR Jane v2 CE | Koala | iS0 | Norbatouch | KPad | Xeno | F62 Kishsaver | Polaris | Montage |


Offline avid

  • Posts: 772
Re: [GB] Lightsaver V3 Kustom Keyboard - First 20 Shipped
« Reply #616 on: Tue, 24 October 2017, 08:45:44 »
For those who received your boards, please check your PCB to make sure it fully works.

Whats the best way to test the pcb?

Offline Dreamre

  • Posts: 858
  • Location: Canada
    • kbdlife
Re: [GB] Lightsaver V3 Kustom Keyboard - First 20 Shipped
« Reply #617 on: Tue, 24 October 2017, 08:49:44 »
For those who received your boards, please check your PCB to make sure it fully works.

Whats the best way to test the pcb?

Plug in the PCB by itself and use tweezers and stick it in each of the through-holes for the switch. If it works, it'll register on a switch test program such as Aquakeytest or Switch Hitter (Elite Keyboards).

Offline Oblotzky

  • Posts: 1845
  • Location: Cologne, Germany
  • Backspace is for people that make mistakes.
Re: [GB] Lightsaver V3 Kustom Keyboard - First 20 Shipped
« Reply #618 on: Tue, 24 October 2017, 08:53:35 »
For those who received your boards, please check your PCB to make sure it fully works.

Whats the best way to test the pcb?

Plug in the PCB by itself and use tweezers and stick it in each of the through-holes for the switch. If it works, it'll register on a switch test program such as Aquakeytest or Switch Hitter (Elite Keyboards).

That makes sense, thanks! So basically just bridge them all like the switch would. I too was worried I wouldn't be able to build it in time as I am still waiting for parts.

Offline avid

  • Posts: 772
Re: [GB] Lightsaver V3 Kustom Keyboard - First 20 Shipped
« Reply #619 on: Tue, 24 October 2017, 09:04:33 »
For those who received your boards, please check your PCB to make sure it fully works.

Whats the best way to test the pcb?

Plug in the PCB by itself and use tweezers and stick it in each of the through-holes for the switch. If it works, it'll register on a switch test program such as Aquakeytest or Switch Hitter (Elite Keyboards).

Perfect, thanks!  Looking forward to see all upcoming builds.

Now the jetfire hype begins  :cool:

Offline elton5354

  • Thread Starter
  • Posts: 2210
  • Location: Canada

Offline Invaderevan

  • Posts: 151
  • Location: DTX
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #621 on: Tue, 24 October 2017, 12:43:12 »
SO MUCH HYPE! I am just glad I don't really care for 1800 style keyboards, I really shouldn't buy any more keyboards.... unless I come across an LSv2 so I can have a complete set :P

WTTF Ribbits, Ashen V2 MX, Bronins

Offline onlinelife

  • Posts: 44
  • Location: Canada
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #622 on: Tue, 24 October 2017, 15:20:45 »
https://imgur.com/a/tZYXW pics of the plate.

It's on the back so doesn't bother me that much but i'll get rid of some of the extra metal.

Also, what are those extra led slots for?

Offline Atredl

  • Posts: 804
  • Location: SoCal
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #623 on: Tue, 24 October 2017, 15:24:09 »

Also, what are those extra led slots for?
The three on the left are caps lock, scroll lock and num lock. The five on the right are layer indicators for layers 0-4.

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11518
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #624 on: Tue, 24 October 2017, 15:30:41 »
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice (lost in mail T_T)

if you're actually reading other people's posts on geekhack in 2020 you're doing something wrong

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos | "Is Linkshine our Nixon?" -NAV (fk u)

Offline onmybikedrunk

  • Posts: 233
  • Location: Portland, OR
    • Danny Woods - Industrial Designer
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #625 on: Tue, 24 October 2017, 16:06:07 »
Pics!  For all those curious...

Full Gallery - 15 pics

Preview Pics:







Elton:
Duck's team forgot my extra PCB/Plate combo.  I'll be PM'ing you...  And of course, thank you for all your hard work making sure these buys go so smoothly.  Out of the last 5 keyboards I've gone in on, this was the last I purchased and the first to come!!!  WHAT?!  No one knows how to do it like Duck/Elton!  Thanks brother!

Offline Petch

  • Posts: 532
  • Location: UK
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #626 on: Tue, 24 October 2017, 16:08:21 »
^ that looks awesome...

Anyone know what sort of LEDs I want if I want them to be diffused with minimal light leak between each hole? I know there are LEDs with different lenses on top but I'm not really sure what I'm looking for

Offline avid

  • Posts: 772
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #627 on: Tue, 24 October 2017, 16:12:34 »
Very nice onmybikedrunk. The black / silver combination is excellent.

Id be very interested to see a reverse black/silver combo.

Offline eldonw

  • Posts: 18
  • Location: WA, US
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #628 on: Tue, 24 October 2017, 19:24:22 »
My keyboard has been stuck in San Francisco for 4 days now  :(

Offline Blazestorm

  • Posts: 190
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #629 on: Tue, 24 October 2017, 20:39:43 »
Received mine, everything looks good, tested both PCBs although wasn't sure how to program them, they weren't recognized by bootmapper-client.

Offline packman86

  • Posts: 322
  • Morning Coffee
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #630 on: Tue, 24 October 2017, 21:09:12 »
Would /r/mm be the best place to find one of these now?
I was late to the party when this gb ran.
TGR Jane V2 | TGR Jane V2 CE | TGR Alice | TGR 910 | TGR x Singa UNIKORN 60 | Matrix 8XV 2.0 Korea Version | LZ CLS s h x | Duck Jetfire | TX-CP | QXP | Noxary X65 | RAMA M60-A | HHKB lol

Offline Atredl

  • Posts: 804
  • Location: SoCal
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #631 on: Tue, 24 October 2017, 21:23:24 »
Would /r/mm be the best place to find one of these now?
I was late to the party when this gb ran.
Yup, second hand market will be the only place to get one. The first 20 v3s are just barely making their way to their owners so Iíd keep your eyes peeled if you want to grab one.

Offline onlinelife

  • Posts: 44
  • Location: Canada
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #632 on: Tue, 24 October 2017, 22:59:04 »
All build up!

https://imgur.com/a/d3HRQ

Using skeletor until GMK obblivion arrives.

I'm also an idiot and tightened the screw too much on one side and it cracked the acrylic. Not that noticeable unless its up close but is there a way of buying a replacement?
Also any guides on how to program it?
« Last Edit: Tue, 24 October 2017, 23:12:30 by onlinelife »

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11518
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #633 on: Tue, 24 October 2017, 23:18:02 »
is there a way of buying a replacement?

doubtful

Quote
Also any guides on how to program it?

https://gist.github.com/ankailou/0b3f3183429536d86ecf4e7d27860b6c

have fun
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice (lost in mail T_T)

if you're actually reading other people's posts on geekhack in 2020 you're doing something wrong

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos | "Is Linkshine our Nixon?" -NAV (fk u)

Offline Blazestorm

  • Posts: 190
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #634 on: Tue, 24 October 2017, 23:52:04 »
is there a way of buying a replacement?

doubtful

Quote
Also any guides on how to program it?

https://gist.github.com/ankailou/0b3f3183429536d86ecf4e7d27860b6c

have fun


Might not be able to buy replacements, but the second link you had showed CAD files for diffuers on the Viper/Eagle, so maybe he'll release the CAD files for LSV3 and you can get new ones cut :)

Offline onlinelife

  • Posts: 44
  • Location: Canada
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #635 on: Wed, 25 October 2017, 00:20:13 »
is there a way of buying a replacement?

doubtful

Quote
Also any guides on how to program it?

https://gist.github.com/ankailou/0b3f3183429536d86ecf4e7d27860b6c

have fun


Might not be able to buy replacements, but the second link you had showed CAD files for diffuers on the Viper/Eagle, so maybe he'll release the CAD files for LSV3 and you can get new ones cut :)

Oh that'll ben nice to get my own done.

Also is the flip key still the right key above backspace? Can't get the board into bootloader mode so I can flash the layout I made.

Offline SakeJams

  • Posts: 103
  • Location: OK
  • HAPPINESS ONLY REAL WHEN SHARED
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #636 on: Wed, 25 October 2017, 01:31:46 »
god I'm so jealous of all these build photos I'm seeing. I wish I would've gotten in on this GB, and r4 is looking pretty dismal ;-;

Offline Blackhawk

  • Posts: 213
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #637 on: Thu, 26 October 2017, 11:42:20 »
Hey Elton

Could you update the spreadsheet with the tracking numbers for the rest of batch 1? Thanks!

Offline yookwh

  • Posts: 117
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #638 on: Thu, 26 October 2017, 12:22:58 »
Hey Elton, the package is going to be sent to me from the address I listed. Hopefully there won't be any issues, but if there are, could you elongate the 3 days to whenever I receive the package? It'll take around an additional week probably.

Offline eddible

  • Posts: 162
  • Location: United Kingdom
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #639 on: Thu, 26 October 2017, 12:44:13 »
For any other UK folks wondering, I've got a customs payment of £25 on mine - so not too bad considering. Mine is due for delivery on Monday as customs have taken so long to process it.

Offline Blazestorm

  • Posts: 190
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #640 on: Thu, 26 October 2017, 13:04:27 »
I have a spare PCB + Polycarb plate to sell at cost if anyone is interested in grabbing a spare, decided I won't use it. Pending
« Last Edit: Thu, 26 October 2017, 16:01:11 by Blazestorm »

Offline toan

  • Posts: 22
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #641 on: Thu, 26 October 2017, 13:33:31 »
I have a spare PCB + Polycarb plate to sell at cost if anyone is interested in grabbing a spare, decided I won't use it.

PM' incoming

Offline avid

  • Posts: 772
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #642 on: Thu, 26 October 2017, 14:40:51 »
If anyone wanna let go of a PCB + SS plate, id love to pick that up. Preferable if your order hasnt been sent out yet.

Offline futurecrime

  • Posts: 884
  • Location: London, England
  • Probably tired right now.
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #643 on: Thu, 26 October 2017, 15:54:46 »
For any other UK folks wondering, I've got a customs payment of £25 on mine - so not too bad considering. Mine is due for delivery on Monday as customs have taken so long to process it.

That's good to know, thanks.

Offline Oblotzky

  • Posts: 1845
  • Location: Cologne, Germany
  • Backspace is for people that make mistakes.
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #644 on: Thu, 26 October 2017, 16:53:32 »
What value was declared on the packages?

Offline eddible

  • Posts: 162
  • Location: United Kingdom
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #645 on: Thu, 26 October 2017, 17:01:49 »
What value was declared on the packages?
UK duty is usually an £8 fee plus 20% VAT so as mine was £25 it must be approximately £100 declared value. I won't have it till Monday to confirm the listed value though.

Offline Blazestorm

  • Posts: 190
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #646 on: Thu, 26 October 2017, 17:12:33 »
What value was declared on the packages?

Mine was declared at $25-35 USD (I forget which)

Offline Dreamre

  • Posts: 858
  • Location: Canada
    • kbdlife
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #647 on: Thu, 26 October 2017, 18:05:50 »
Does anyone know where I can find the keymapping software for this? Thanks in advance :)).

Edit:

http://kbdlab.co.kr/index.php?mid=board_sw&document_srl=100301
« Last Edit: Thu, 26 October 2017, 18:12:10 by Dreamre »

Offline onlinelife

  • Posts: 44
  • Location: Canada
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #648 on: Thu, 26 October 2017, 18:32:47 »
Does anyone know where I can find the keymapping software for this? Thanks in advance :)).

Edit:

http://kbdlab.co.kr/index.php?mid=board_sw&document_srl=100301

Can you let me know how you get your board into bootloader mode? I haven't had any luck with the guides i looked at.

Offline yookwh

  • Posts: 117
Re: [GB] Lightsaver V3 Kustom Keyboard - Remaining 30/50 Shipping Today!
« Reply #649 on: Thu, 26 October 2017, 22:43:56 »
Just a heads up, Elton has put up the rest of the tracking numbers :-)