Just wanted to share my USB Type-C mod for a KC60.
http://imgur.com/a/RtM45The problem: dropped my KC60 keyboard off the side of my bed too many times and the connector got all mangled up.
Here is the housing disconnected from the board with the pins exposed.
Desoldered the pins from the board.
Soldering wires onto the USB Type-C breakout board.
Soldered the breakout board onto the main PCB board and put a little electric tape to insulate the housing. I used the post-its to keep track of which pins solder where, and testing results.
Hot glue and clamp.
The connector didn't lie flush so I had to file the hole a little larger.