Author Topic: [GB COMPLETE] SaiB - CP  (Read 50426 times)

0 Members and 2 Guests are viewing this topic.

Online LightningXI

  • * Esteemed Elder
  • Posts: 1455
  • Location: New York
  • PPD
    • ArtisanMacro
Re: [GB] SaiB - CP
« Reply #450 on: Wed, 01 August 2018, 14:31:03 »
Pretty sure he said during the ic that he didn't plan to do a GB for a weight, I'd be interested though. Did you guys get tracking numbers when he sent out the board?

Bummer about the weight. I was hoping to see a cool weight there. I hope we can get the measurements though for both the weight and the screws that would hold it.

I didn't get tracking info. It just showed up.

Offline Vloshko

  • Posts: 145
  • Location: Cali, Colorado, & Israel
Re: [GB] SaiB - CP
« Reply #451 on: Wed, 01 August 2018, 16:54:11 »
Anyone on the West Coast or close to there get their board yet?
Visit the Typing Test and try!

Offline dubious

  • 키랩 홍보대사
  • Posts: 478
  • Location: Layer 8
Re: [GB] SaiB - CP
« Reply #452 on: Wed, 01 August 2018, 16:59:22 »
Anyone on the West Coast or close to there get their board yet?
West coast here. I've received mine, but they weren't all sent out at the same time so it's irrelevant.

Offline odd

  • Posts: 253
Re: [GB] SaiB - CP
« Reply #453 on: Mon, 06 August 2018, 20:41:58 »
Anyone on the West Coast or close to there get their board yet?

I'm in the Bay Area and got mine last Friday.

Offline forumusername

  • Posts: 106
Re: [GB] SaiB - CP
« Reply #454 on: Mon, 06 August 2018, 20:46:26 »
I haven't gotten any tracking notice nor a board.

edit:

I have  now sent the approval email 3 times.

« Last Edit: Mon, 06 August 2018, 20:51:50 by forumusername »

Offline Eggplant

  • Posts: 44
Re: [GB] SaiB - CP
« Reply #455 on: Mon, 06 August 2018, 20:53:20 »
Mine came in last Friday! (I was #10, located in the midwest)

Here are some pictures of it next to my tx-cp:

201444-0

201446-1

(67g Zilents, Zeal Stabs, GMK Laser, DC Mini Reaper on the left, Keyforge Snek and Spook on the right)

I and I'm sure everyone else appreciate all the effort and complications you had to endure PainMaster!

Thank you for putting everything together and ensuring such a fantastic product made it into all of our hands!  :thumb:


Offline kimbles

  • Posts: 29
Re: [GB] SaiB - CP
« Reply #456 on: Tue, 07 August 2018, 11:50:02 »
I sent an approval email but not sure where I stand in the shipping order?
Visit the Typing Test and try!

Offline PainMaster

  • Formerly cjakma
  • Thread Starter
  • Posts: 141
  • Location: SungNam, south korea
  • IBM(PainMaster)
Re: [GB] SaiB - CP
« Reply #457 on: Wed, 08 August 2018, 02:08:12 »
> 2018-08-08 Update.


SaiB - CP GroupBuy Complete !!!
Send Clear !!!



I'm really sorry for the late shipment.
There is a lot of business issues. (Server down / Traffic over / etc etc...  T^T)   - Damn Openfire Custom !!!
I was out of time to shipping.

It was very difficult to Packaging.
because, I ordered the box Sooooooooooooooooo big.

I didn't expect the delivery charge to be this expensive.
I've lost money a little, but it's okay.
It's my first challenge, Anyway I've done it.

add 1)
The Bottom weight plate design document will be open.

add 2)
Details of defective products Starting tomorrow,
Shipping is scheduled for 8/14.

add 0)
Last time refund processing is priority...



   #0 - Complete
   #1 - Complete
   #2 - Complete
   #3 - Complete
   #4 - Complete
   #5 - Complete
   #6 - Complete
   #7 - Complete
   #8 - Complete
   #9 - Complete
   #10 - Complete
   #11 - Complete
   #12 - Complete
   #13 - Cancel
   #14 - Complete
   #15 - Send
   #16 - Cancel
   #17 - Send
   #18 - Send
   #19 - Send
   #20 - Send
   #21 - Send
   #22 - Send



201486-0
« Last Edit: Wed, 08 August 2018, 02:38:33 by PainMaster »
Fail to purchase GMK Olivia T^T
SaiB-CP Black - Kailh Bronze (Non Click / 58g) - Finish
Light Saver v1 Black - Cherry Wyze Black (Linear / 64g)
Light Saver v2 Gray - Cherry 1501 Black (Linear / 64g)
Light Saver v3 Silver - Cherry 8200 White (Non Click / 64g)
Light Saver Acryl (Duck96 base) - Gateron Yellow (Linear / 62g) - Season 1 Fin.
Octagon v1 Black - Cherry 1501 Black (Linear / 64g) / TX-1800 v1 Red/Black - Cherry Wyze Black (Linear / 58g)
VE.A Test Housing- Cherry 8113 White (Non Click / 58g)
TC-V3 , LZ*ASRH Black, VE.A 2nd
... etc.

Offline angelafreet

  • Posts: 3
« Last Edit: Sun, 12 August 2018, 05:57:55 by angelafreet »

Offline haitacxyz

  • Posts: 2
Re: [GB] SaiB - CP
« Reply #459 on: Sun, 12 August 2018, 09:01:33 »
Thank for your review.
« Last Edit: Sun, 12 August 2018, 09:04:07 by haitacxyz »

Offline forumusername

  • Posts: 106
Re: [GB] SaiB - CP
« Reply #460 on: Mon, 13 August 2018, 18:59:28 »
Got my board  in today, when checking the PCB the point right of f12 doesn't register and is marked KEC1... can someone educate me as to what this key is supposed to do?  I assume it works but want to be certain.

Thanks in advance all

Offline aznreaper

  • Posts: 239
  • Location: AB, Canada
Re: [GB] SaiB - CP
« Reply #461 on: Tue, 14 August 2018, 16:01:12 »
Have you tried checking it in jigion, and is that the only key that doesn't seem to do anything? There should be a key that acts as a function key, so if it doesn't seem like it's doing anything initially, open jigion software and it should show you if it reads the keypress and if it's programmed as the function key

Offline aznreaper

  • Posts: 239
  • Location: AB, Canada
Re: [GB] SaiB - CP
« Reply #462 on: Wed, 15 August 2018, 00:38:05 »
Just got my board, the box is so big, and there was so much packing  ;D Board looks good, and sure has some heft to it. The anod isn't the smoothest, especially on top, but mine seem to be in really good condition, don't really see any nicks or scratches or anything.

Looking forwards to building this one, it took a while, but the value of this board was amazing.

Thanks Painmaster for making this happen!

Offline PainMaster

  • Formerly cjakma
  • Thread Starter
  • Posts: 141
  • Location: SungNam, south korea
  • IBM(PainMaster)
Re: [GB] SaiB - CP
« Reply #463 on: Sat, 18 August 2018, 11:09:16 »
Hi everyone long time no see. :)

I had a very hard time after delivery.

Did you get all the shipping?



PS : Refund complete! & time to sell the defective product!
« Last Edit: Sat, 18 August 2018, 11:35:07 by PainMaster »
Fail to purchase GMK Olivia T^T
SaiB-CP Black - Kailh Bronze (Non Click / 58g) - Finish
Light Saver v1 Black - Cherry Wyze Black (Linear / 64g)
Light Saver v2 Gray - Cherry 1501 Black (Linear / 64g)
Light Saver v3 Silver - Cherry 8200 White (Non Click / 64g)
Light Saver Acryl (Duck96 base) - Gateron Yellow (Linear / 62g) - Season 1 Fin.
Octagon v1 Black - Cherry 1501 Black (Linear / 64g) / TX-1800 v1 Red/Black - Cherry Wyze Black (Linear / 58g)
VE.A Test Housing- Cherry 8113 White (Non Click / 58g)
TC-V3 , LZ*ASRH Black, VE.A 2nd
... etc.

Offline liillliillliiii

  • Posts: 3
Re: [GB] SaiB - CP
« Reply #464 on: Sat, 18 August 2018, 13:39:27 »
PainMaster,

I have not received anything for #17.  Can you email/pm me a tracking number?

Thanks

Offline kimbles

  • Posts: 29
Re: [GB] SaiB - CP
« Reply #465 on: Sat, 18 August 2018, 18:23:52 »
Got my board, thank you for your efforts PainMaster.

수고했어요!
Visit the Typing Test and try!

Offline PainMaster

  • Formerly cjakma
  • Thread Starter
  • Posts: 141
  • Location: SungNam, south korea
  • IBM(PainMaster)
Re: [GB] SaiB - CP
« Reply #466 on: Sun, 19 August 2018, 07:29:41 »
Of course, I sent you a PM.

PainMaster,

I have not received anything for #17.  Can you email/pm me a tracking number?

Thanks
Fail to purchase GMK Olivia T^T
SaiB-CP Black - Kailh Bronze (Non Click / 58g) - Finish
Light Saver v1 Black - Cherry Wyze Black (Linear / 64g)
Light Saver v2 Gray - Cherry 1501 Black (Linear / 64g)
Light Saver v3 Silver - Cherry 8200 White (Non Click / 64g)
Light Saver Acryl (Duck96 base) - Gateron Yellow (Linear / 62g) - Season 1 Fin.
Octagon v1 Black - Cherry 1501 Black (Linear / 64g) / TX-1800 v1 Red/Black - Cherry Wyze Black (Linear / 58g)
VE.A Test Housing- Cherry 8113 White (Non Click / 58g)
TC-V3 , LZ*ASRH Black, VE.A 2nd
... etc.

Offline PainMaster

  • Formerly cjakma
  • Thread Starter
  • Posts: 141
  • Location: SungNam, south korea
  • IBM(PainMaster)
Re: [GB] SaiB - CP
« Reply #467 on: Sun, 19 August 2018, 07:41:39 »
PainMaster,

I have not received anything for #17.  Can you email/pm me a tracking number?

Thanks


SaiB - CP arrived nearby on August 10.
It is reported that the address was incorrect and could not be shipped.
Hurry up and check.

Fail to purchase GMK Olivia T^T
SaiB-CP Black - Kailh Bronze (Non Click / 58g) - Finish
Light Saver v1 Black - Cherry Wyze Black (Linear / 64g)
Light Saver v2 Gray - Cherry 1501 Black (Linear / 64g)
Light Saver v3 Silver - Cherry 8200 White (Non Click / 64g)
Light Saver Acryl (Duck96 base) - Gateron Yellow (Linear / 62g) - Season 1 Fin.
Octagon v1 Black - Cherry 1501 Black (Linear / 64g) / TX-1800 v1 Red/Black - Cherry Wyze Black (Linear / 58g)
VE.A Test Housing- Cherry 8113 White (Non Click / 58g)
TC-V3 , LZ*ASRH Black, VE.A 2nd
... etc.

Offline PainMaster

  • Formerly cjakma
  • Thread Starter
  • Posts: 141
  • Location: SungNam, south korea
  • IBM(PainMaster)
Re: [GB] SaiB - CP
« Reply #468 on: Mon, 20 August 2018, 02:45:20 »
> 2018-08-20 Update.


> issue

The firmware version did not match as a result of testing and finding that the RGB control of the latest tool was incorrect.



> Solution

Please upload the latest version of the firmware.



> the latest version firmware

* L3_171209.zip (91.58 kB - downloaded 16 times.)

1. unzip
2. SaiB-CP connect
3. Run loadfw.bat



> the latest version JigOn (keymapping Tool)

* JigOn_170419.zip (373.68 kB - downloaded 15 times.)



« Last Edit: Mon, 20 August 2018, 02:50:53 by PainMaster »
Fail to purchase GMK Olivia T^T
SaiB-CP Black - Kailh Bronze (Non Click / 58g) - Finish
Light Saver v1 Black - Cherry Wyze Black (Linear / 64g)
Light Saver v2 Gray - Cherry 1501 Black (Linear / 64g)
Light Saver v3 Silver - Cherry 8200 White (Non Click / 64g)
Light Saver Acryl (Duck96 base) - Gateron Yellow (Linear / 62g) - Season 1 Fin.
Octagon v1 Black - Cherry 1501 Black (Linear / 64g) / TX-1800 v1 Red/Black - Cherry Wyze Black (Linear / 58g)
VE.A Test Housing- Cherry 8113 White (Non Click / 58g)
TC-V3 , LZ*ASRH Black, VE.A 2nd
... etc.

Offline Sshimosawa

  • Posts: 69
Re: [GB] SaiB - CP
« Reply #469 on: Tue, 21 August 2018, 19:38:23 »
Has anyone made a brass weight for theirs?

If not, OP would you mind sharing the measurements of the slot on the underside if you have it?

Offline PainMaster

  • Formerly cjakma
  • Thread Starter
  • Posts: 141
  • Location: SungNam, south korea
  • IBM(PainMaster)
Re: [GB] SaiB - CP
« Reply #470 on: Tue, 21 August 2018, 23:35:16 »
Has anyone made a brass weight for theirs?

If not, OP would you mind sharing the measurements of the slot on the underside if you have it?


The bottom's weight plate document will be opened.

I'm looking for an error.
Fail to purchase GMK Olivia T^T
SaiB-CP Black - Kailh Bronze (Non Click / 58g) - Finish
Light Saver v1 Black - Cherry Wyze Black (Linear / 64g)
Light Saver v2 Gray - Cherry 1501 Black (Linear / 64g)
Light Saver v3 Silver - Cherry 8200 White (Non Click / 64g)
Light Saver Acryl (Duck96 base) - Gateron Yellow (Linear / 62g) - Season 1 Fin.
Octagon v1 Black - Cherry 1501 Black (Linear / 64g) / TX-1800 v1 Red/Black - Cherry Wyze Black (Linear / 58g)
VE.A Test Housing- Cherry 8113 White (Non Click / 58g)
TC-V3 , LZ*ASRH Black, VE.A 2nd
... etc.

Offline Sshimosawa

  • Posts: 69
Re: [GB] SaiB - CP
« Reply #471 on: Wed, 22 August 2018, 00:06:39 »
Huge thank you. Whenever you can would be great!

Offline Vloshko

  • Posts: 145
  • Location: Cali, Colorado, & Israel
Re: [GB] SaiB - CP
« Reply #472 on: Fri, 24 August 2018, 18:41:49 »
Board received, starting build soon, will post photos of everything.
Visit the Typing Test and try!

Online LightningXI

  • * Esteemed Elder
  • Posts: 1455
  • Location: New York
  • PPD
    • ArtisanMacro
Re: [GB] SaiB - CP
« Reply #473 on: Fri, 24 August 2018, 20:52:07 »
Board received, starting build soon, will post photos of everything.

Best of luck, and excited to see the build log!

Offline PainMaster

  • Formerly cjakma
  • Thread Starter
  • Posts: 141
  • Location: SungNam, south korea
  • IBM(PainMaster)
Re: [GB] SaiB - CP
« Reply #474 on: Sun, 26 August 2018, 23:26:07 »
Board received, starting build soon, will post photos of everything.

Looking forward to it!

« Last Edit: Sun, 26 August 2018, 23:31:48 by PainMaster »
Fail to purchase GMK Olivia T^T
SaiB-CP Black - Kailh Bronze (Non Click / 58g) - Finish
Light Saver v1 Black - Cherry Wyze Black (Linear / 64g)
Light Saver v2 Gray - Cherry 1501 Black (Linear / 64g)
Light Saver v3 Silver - Cherry 8200 White (Non Click / 64g)
Light Saver Acryl (Duck96 base) - Gateron Yellow (Linear / 62g) - Season 1 Fin.
Octagon v1 Black - Cherry 1501 Black (Linear / 64g) / TX-1800 v1 Red/Black - Cherry Wyze Black (Linear / 58g)
VE.A Test Housing- Cherry 8113 White (Non Click / 58g)
TC-V3 , LZ*ASRH Black, VE.A 2nd
... etc.

Offline Sshimosawa

  • Posts: 69
Re: [GB End] SaiB - CP
« Reply #475 on: Sun, 02 September 2018, 19:22:16 »
Hey Mr Painmaster, just shot you a PM re: the brass plate measurements and another question.

Offline bthezebra

  • Posts: 216
Re: [GB End] SaiB - CP
« Reply #476 on: Mon, 03 September 2018, 21:34:40 »
Finally built mine can't wait to bring to work tomorrow :)

Offline PainMaster

  • Formerly cjakma
  • Thread Starter
  • Posts: 141
  • Location: SungNam, south korea
  • IBM(PainMaster)
Re: [GB End] SaiB - CP
« Reply #477 on: Mon, 03 September 2018, 22:29:53 »
Finally built mine can't wait to bring to work tomorrow :)
Show Image



202911-0

202913-1

it's My workSet :)

Fail to purchase GMK Olivia T^T
SaiB-CP Black - Kailh Bronze (Non Click / 58g) - Finish
Light Saver v1 Black - Cherry Wyze Black (Linear / 64g)
Light Saver v2 Gray - Cherry 1501 Black (Linear / 64g)
Light Saver v3 Silver - Cherry 8200 White (Non Click / 64g)
Light Saver Acryl (Duck96 base) - Gateron Yellow (Linear / 62g) - Season 1 Fin.
Octagon v1 Black - Cherry 1501 Black (Linear / 64g) / TX-1800 v1 Red/Black - Cherry Wyze Black (Linear / 58g)
VE.A Test Housing- Cherry 8113 White (Non Click / 58g)
TC-V3 , LZ*ASRH Black, VE.A 2nd
... etc.

Offline ihalatch

  • Posts: 649
  • Location: Adelaide, Australia
Re: [GB End] SaiB - CP
« Reply #478 on: Tue, 04 September 2018, 23:14:02 »
I'm missing the weight? I can see the cut on the bottom and the holes for the screws but no weight? Weren't we supposed to get one?

Offline bthezebra

  • Posts: 216
Re: [GB End] SaiB - CP
« Reply #479 on: Tue, 04 September 2018, 23:29:57 »
I'm missing the weight? I can see the cut on the bottom and the holes for the screws but no weight? Weren't we supposed to get one?
A weight was never included but a few posts above some users might be looking to get one made. I would hop on one of those if they open it to the group and would also be interested in a polycarbonate plate for softer typing feel.

Online LightningXI

  • * Esteemed Elder
  • Posts: 1455
  • Location: New York
  • PPD
    • ArtisanMacro
Re: [GB End] SaiB - CP
« Reply #480 on: Wed, 05 September 2018, 00:16:02 »
I'm missing the weight? I can see the cut on the bottom and the holes for the screws but no weight? Weren't we supposed to get one?

It wasn't included in the base kit, so PainMaster should be sharing the files for owners to get their own independently.

add 1)
The Bottom weight plate design document will be open.

Hey PainMaster, have you shared the plate and weight design file yet? If not, it would be nice to have it released so people can figure out a way to get a weight done for their SaiB-CPs

Online zoois

  • Posts: 3
  • Location: south korea
    • s!mp!e l!fe
Re: [GB End] SaiB - CP
« Reply #481 on: Tue, 11 September 2018, 04:48:30 »
Here is my build.

-Desert Sand Cerakoted
-Tealios (Lubed)
-GMK + Enjoy PBT

Thank you so much PainMaster!

203305-0

203307-1

203309-2

203311-3

Online LightningXI

  • * Esteemed Elder
  • Posts: 1455
  • Location: New York
  • PPD
    • ArtisanMacro
Re: [GB End] SaiB - CP
« Reply #482 on: Tue, 11 September 2018, 05:45:54 »
Here is my build.

-Desert Sand Cerakoted
-Tealios (Lubed)
-GMK + Enjoy PBT

Thank you so much PainMaster!

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)
Wow great attention to detail. Looks absolutely phenomenal.

Sent from my mobile using Tapatalk


Offline PainMaster

  • Formerly cjakma
  • Thread Starter
  • Posts: 141
  • Location: SungNam, south korea
  • IBM(PainMaster)
Re: [GB End] SaiB - CP
« Reply #483 on: Tue, 11 September 2018, 07:23:58 »
Here is my build.

-Desert Sand Cerakoted
-Tealios (Lubed)
-GMK + Enjoy PBT

Thank you so much PainMaster!

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)



WOW- It's My Pleasure :)
Fail to purchase GMK Olivia T^T
SaiB-CP Black - Kailh Bronze (Non Click / 58g) - Finish
Light Saver v1 Black - Cherry Wyze Black (Linear / 64g)
Light Saver v2 Gray - Cherry 1501 Black (Linear / 64g)
Light Saver v3 Silver - Cherry 8200 White (Non Click / 64g)
Light Saver Acryl (Duck96 base) - Gateron Yellow (Linear / 62g) - Season 1 Fin.
Octagon v1 Black - Cherry 1501 Black (Linear / 64g) / TX-1800 v1 Red/Black - Cherry Wyze Black (Linear / 58g)
VE.A Test Housing- Cherry 8113 White (Non Click / 58g)
TC-V3 , LZ*ASRH Black, VE.A 2nd
... etc.

Offline donut_sauce

  • Posts: 324
Re: [GB End] SaiB - CP
« Reply #484 on: Tue, 11 September 2018, 07:31:13 »
Here is my build.

-Desert Sand Cerakoted
-Tealios (Lubed)
-GMK + Enjoy PBT

Thank you so much PainMaster!

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)
This board is amazing wow!

Offline PainMaster

  • Formerly cjakma
  • Thread Starter
  • Posts: 141
  • Location: SungNam, south korea
  • IBM(PainMaster)
Re: [GB COMPLETE] SaiB - CP
« Reply #485 on: Fri, 28 September 2018, 02:39:57 »
> 2018-09-28 Update.
   
    SaiB - CP's Bottom weight plate Document Open !

    You can edit it, as long as you specify the source (SaiB - CP).

   * CP_BOTTOM PLATE.zip (36.24 kB - downloaded 13 times.)
Fail to purchase GMK Olivia T^T
SaiB-CP Black - Kailh Bronze (Non Click / 58g) - Finish
Light Saver v1 Black - Cherry Wyze Black (Linear / 64g)
Light Saver v2 Gray - Cherry 1501 Black (Linear / 64g)
Light Saver v3 Silver - Cherry 8200 White (Non Click / 64g)
Light Saver Acryl (Duck96 base) - Gateron Yellow (Linear / 62g) - Season 1 Fin.
Octagon v1 Black - Cherry 1501 Black (Linear / 64g) / TX-1800 v1 Red/Black - Cherry Wyze Black (Linear / 58g)
VE.A Test Housing- Cherry 8113 White (Non Click / 58g)
TC-V3 , LZ*ASRH Black, VE.A 2nd
... etc.

Offline Sshimosawa

  • Posts: 69
Re: [GB COMPLETE] SaiB - CP
« Reply #486 on: Fri, 28 September 2018, 03:05:44 »
Awesome. Thank you!

Online LightningXI

  • * Esteemed Elder
  • Posts: 1455
  • Location: New York
  • PPD
    • ArtisanMacro
Re: [GB COMPLETE] SaiB - CP
« Reply #487 on: Fri, 28 September 2018, 11:55:21 »
> 2018-09-28 Update.
   
    SaiB - CP's Bottom weight plate Document Open !

    You can edit it, as long as you specify the source (SaiB - CP).

    (Attachment Link)

Thank you!! Now to find out if someone could help us make a weight...

Offline Eggplant

  • Posts: 44
Re: [GB COMPLETE] SaiB - CP
« Reply #488 on: Fri, 28 September 2018, 12:08:02 »
Nice!

Count me in, if someone can make it happen.

Offline wholypantalones

  • Posts: 422
Re: [GB COMPLETE] SaiB - CP
« Reply #489 on: Fri, 28 September 2018, 22:06:49 »
> 2018-09-28 Update.
   
    SaiB - CP's Bottom weight plate Document Open !

    You can edit it, as long as you specify the source (SaiB - CP).

    (Attachment Link)

Thank you!! Now to find out if someone could help us make a weight...

What aboot that lazerboost place?

Offline ihalatch

  • Posts: 649
  • Location: Adelaide, Australia
Re: [GB COMPLETE] SaiB - CP
« Reply #490 on: Sun, 30 September 2018, 03:32:30 »
I've just built mine: lubed, stickered and sip-socketed silent black MX switches and GMK Dolch.




Online LightningXI

  • * Esteemed Elder
  • Posts: 1455
  • Location: New York
  • PPD
    • ArtisanMacro
Re: [GB COMPLETE] SaiB - CP
« Reply #491 on: Sat, 20 October 2018, 01:45:52 »
Edit: asked a dumb question.
« Last Edit: Sat, 20 October 2018, 01:53:52 by LightningXI »

Offline PainMaster

  • Formerly cjakma
  • Thread Starter
  • Posts: 141
  • Location: SungNam, south korea
  • IBM(PainMaster)
Re: [GB COMPLETE] SaiB - CP
« Reply #492 on: Sat, 20 October 2018, 02:51:14 »
Fail to purchase GMK Olivia T^T
SaiB-CP Black - Kailh Bronze (Non Click / 58g) - Finish
Light Saver v1 Black - Cherry Wyze Black (Linear / 64g)
Light Saver v2 Gray - Cherry 1501 Black (Linear / 64g)
Light Saver v3 Silver - Cherry 8200 White (Non Click / 64g)
Light Saver Acryl (Duck96 base) - Gateron Yellow (Linear / 62g) - Season 1 Fin.
Octagon v1 Black - Cherry 1501 Black (Linear / 64g) / TX-1800 v1 Red/Black - Cherry Wyze Black (Linear / 58g)
VE.A Test Housing- Cherry 8113 White (Non Click / 58g)
TC-V3 , LZ*ASRH Black, VE.A 2nd
... etc.

Online LightningXI

  • * Esteemed Elder
  • Posts: 1455
  • Location: New York
  • PPD
    • ArtisanMacro
Re: [GB COMPLETE] SaiB - CP
« Reply #493 on: Sat, 20 October 2018, 09:51:02 »
Edit: asked a dumb question.

Hmm ?? :)

Now I remember the question I wanted to ask -- do you have an updated switch plate DWG file? I saw you've provided the bottom weight, but I might also want to see if I can have a plate of different material cut for myself.

Offline PainMaster

  • Formerly cjakma
  • Thread Starter
  • Posts: 141
  • Location: SungNam, south korea
  • IBM(PainMaster)
Re: [GB COMPLETE] SaiB - CP
« Reply #494 on: Sat, 20 October 2018, 17:46:51 »
Edit: asked a dumb question.

Hmm ?? :)

Now I remember the question I wanted to ask -- do you have an updated switch plate DWG file? I saw you've provided the bottom weight, but I might also want to see if I can have a plate of different material cut for myself.



I planned switch plate only STS.

But, Because you're often asking, I'll consider it.

Brass ?, Alu?
Fail to purchase GMK Olivia T^T
SaiB-CP Black - Kailh Bronze (Non Click / 58g) - Finish
Light Saver v1 Black - Cherry Wyze Black (Linear / 64g)
Light Saver v2 Gray - Cherry 1501 Black (Linear / 64g)
Light Saver v3 Silver - Cherry 8200 White (Non Click / 64g)
Light Saver Acryl (Duck96 base) - Gateron Yellow (Linear / 62g) - Season 1 Fin.
Octagon v1 Black - Cherry 1501 Black (Linear / 64g) / TX-1800 v1 Red/Black - Cherry Wyze Black (Linear / 58g)
VE.A Test Housing- Cherry 8113 White (Non Click / 58g)
TC-V3 , LZ*ASRH Black, VE.A 2nd
... etc.

Offline bthezebra

  • Posts: 216
Re: [GB COMPLETE] SaiB - CP
« Reply #495 on: Sat, 20 October 2018, 18:11:09 »
Edit: asked a dumb question.

Hmm ?? :)

Now I remember the question I wanted to ask -- do you have an updated switch plate DWG file? I saw you've provided the bottom weight, but I might also want to see if I can have a plate of different material cut for myself.



I planned switch plate only STS.

But, Because you're often asking, I'll consider it.

Brass ?, Alu?
I'd love polycarbonate personally :)

Online LightningXI

  • * Esteemed Elder
  • Posts: 1455
  • Location: New York
  • PPD
    • ArtisanMacro
Re: [GB COMPLETE] SaiB - CP
« Reply #496 on: Sat, 20 October 2018, 18:29:57 »
Edit: asked a dumb question.

Hmm ?? :)

Now I remember the question I wanted to ask -- do you have an updated switch plate DWG file? I saw you've provided the bottom weight, but I might also want to see if I can have a plate of different material cut for myself.



I planned switch plate only STS.

But, Because you're often asking, I'll consider it.

Brass ?, Alu?

I would do brass and/or polycarbonate.


Offline Carlobv

  • Posts: 33
Re: [GB COMPLETE] SaiB - CP
« Reply #497 on: Mon, 05 November 2018, 08:41:17 »
Did anyone ever make a weight for this (or have instructions for someone clueless on how to do so)?  I just bought one of these, and I'm really happy with it, but I'd like to get a weight as well.

Offline dubious

  • 키랩 홍보대사
  • Posts: 478
  • Location: Layer 8
Re: [GB COMPLETE] SaiB - CP
« Reply #498 on: Mon, 05 November 2018, 15:53:30 »
Edit: asked a dumb question.

Hmm ?? :)

Now I remember the question I wanted to ask -- do you have an updated switch plate DWG file? I saw you've provided the bottom weight, but I might also want to see if I can have a plate of different material cut for myself.



I planned switch plate only STS.

But, Because you're often asking, I'll consider it.

Brass ?, Alu?

My vote is for PC or brass!