Author Topic: [IC] LZ GH V2 ( Colors IC )  (Read 28038 times)

0 Members and 1 Guest are viewing this topic.

Offline LifeZ

  • Thread Starter
  • Posts: 645
  • LifeZone
[IC] LZ GH V2 ( Colors IC )
« on: Mon, 15 January 2018, 17:58:44 »
Hello,
This is Free interest research on GH V2.

LAY-OUT? 80? 75? 65?

Angled??  bar??

Free talk.

Thanks

186615-0
« Last Edit: Mon, 12 March 2018, 08:44:45 by LifeZ »

Offline megaforce93

  • Posts: 656
Re: [IC] LZ GH V2
« Reply #1 on: Mon, 15 January 2018, 18:00:22 »
84key. WKL.

STS Bottom.

Bar.

Angled.

:D

I had to choose LZ-GH or a college textbook from the original GB. I chose the textbook. I will not make the same mistake again.
« Last Edit: Mon, 15 January 2018, 18:02:11 by megaforce93 »

Online mech0nly

  • Posts: 153
  • Location: ID
  • aka Blazeheart
Re: [IC] LZ GH V2
« Reply #2 on: Mon, 15 January 2018, 18:01:14 »
80% with bar definitely :thumb:
also, sky blue edition!
« Last Edit: Mon, 15 January 2018, 18:04:36 by mech0nly »
keyboards are keyboards

Online LightningXI

  • * Esteemed Elder
  • Posts: 1300
  • Location: New York
  • PPD
Re: [IC] LZ GH V2
« Reply #3 on: Mon, 15 January 2018, 18:01:40 »
To add onto that: maybe just no exposed screws for the weight.

Also down for 75% designs. Angled. What do you mean by bar?

Online CommonCurt

  • * Esteemed Elder
  • Posts: 4469
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: [IC] LZ GH V2
« Reply #4 on: Mon, 15 January 2018, 18:02:43 »
YES!

84 key or Winkeyless TKL

I actually really like the way the original looks so I'd personally prefer it to look as much like the original as possible.

7 or 8 degrees would be bout right.

Color: Grey, Light Olive Green, Navy Blue,
and if coatings could be a possibility then Beige.
« Last Edit: Mon, 15 January 2018, 23:55:15 by CommonCurt »
Some of my Keyboards -->
More
OTD Koala:  lubed 62g Old MX-Blacks   |   LZ-GH V2   |   KMAC2:  lubed 62g Tactile MX-Greys   |   LZ CLS s   |   X60:  lubed 62g Vintage MX-Blacks   |   GON NerD 60:  lubed 62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  lubed 62g MX-Clears  &  lubed  62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS ---->
More

Online UsualSuspectXXX

  • Posts: 3421
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [IC] LZ GH V2
« Reply #5 on: Mon, 15 January 2018, 18:05:10 »
Definitely down for ss bottom with bar!


Offline Kafka

  • Posts: 362
  • i like clean things
Re: [IC] LZ GH V2
« Reply #6 on: Mon, 15 January 2018, 18:06:59 »
To add onto that: maybe just no exposed screws for the weight.

Also down for 75% designs. Angled. What do you mean by bar?

Original GH had a bar along the backend to create the angle

186617-0

Offline crtexcnndrm99

  • Posts: 338
  • Location: Brisbane, Australia
  • *profile image used without permission* ;)
Re: [IC] LZ GH V2
« Reply #7 on: Mon, 15 January 2018, 18:10:34 »
84 layout.

Bar.

Dark grey.

 :thumb:


You're a smooth smoothie, you know? ~ Gaear Grimsrud

Online UsualSuspectXXX

  • Posts: 3421
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [IC] LZ GH V2
« Reply #8 on: Mon, 15 January 2018, 18:17:12 »
Maybe a more different layout? Like a 60% + F row?

Offline nickheller

  • Cherry ML life
  • * Destiny Supporter
  • Posts: 1429
  • Location: Earth
Re: [IC] LZ GH V2
« Reply #9 on: Mon, 15 January 2018, 18:20:41 »
Would love 84 key bar  :thumb: :thumb: mirror bottom too pls
Gotcha. Those sacks look mouth watering.

Offline oatmicro

  • Posts: 349
Re: [IC] LZ GH V2
« Reply #10 on: Mon, 15 January 2018, 18:22:45 »
+1 for 80 WKL with bar

Actually I'd like to see it looks like V1

Offline cgrums

  • Posts: 21
Re: [IC] LZ GH V2
« Reply #11 on: Mon, 15 January 2018, 18:24:47 »
I'd buy either 65% or 80% with bar. I'm hooked on your boards LZ.

Online Mr_BeastQuake

  • Posts: 398
  • Location: Oregon
    • Reddit
Re: [IC] LZ GH V2
« Reply #12 on: Mon, 15 January 2018, 18:25:20 »
Voting against a 75 and for a bar.

Edit: would prefer a 65%
« Last Edit: Mon, 15 January 2018, 20:51:33 by Mr_BeastQuake »

Offline poolside

  • Posts: 715
  • Location: On the deck
Re: [IC] LZ GH V2
« Reply #13 on: Mon, 15 January 2018, 18:29:48 »
Pink 84 WKL with angled wedge-shaped SS or brass bottom  :cool:

Offline FailureToLoad

  • Posts: 22
Re: [IC] LZ GH V2
« Reply #14 on: Mon, 15 January 2018, 18:45:29 »
+1 for 65%

Offline P1kas

  • Posts: 178
  • Location: Puerto Rico
  • AKA Crono
Re: [IC] LZ GH V2
« Reply #15 on: Mon, 15 January 2018, 18:55:04 »
75% pls! Angled side
There is no such thing as "too much orange."

Offline crtexcnndrm99

  • Posts: 338
  • Location: Brisbane, Australia
  • *profile image used without permission* ;)
Re: [IC] LZ GH V2
« Reply #16 on: Mon, 15 January 2018, 18:55:35 »
+1 for 80 WKL with bar

Actually I'd like to see it looks like V1

+1 on a re-run of V1

80% and bar or bust ;)
You're a smooth smoothie, you know? ~ Gaear Grimsrud

Online OmegaSupreme

  • Posts: 213
  • Location: Canada
  • For Cybertron!!!
Re: [IC] LZ GH V2
« Reply #17 on: Mon, 15 January 2018, 18:59:01 »
 I would be in for a 80 WKL with bar.
| TX-CP | Dolphin V3x 2 | Dolphin Padx 2 | Unicorn X Legend | Jane V2 (soon) |

Offline futurecrime

  • Posts: 530
  • Location: London, England
  • Probably tired right now.
Re: [IC] LZ GH V2
« Reply #18 on: Mon, 15 January 2018, 19:03:19 »
84key. WKL.

STS Bottom.

Bar.

Angled.

:D


Exactly this.

Online CommonCurt

  • * Esteemed Elder
  • Posts: 4469
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: [IC] LZ GH V2
« Reply #19 on: Mon, 15 January 2018, 19:04:57 »
+1 for 80 WKL with bar

Actually I'd like to see it looks like V1

+1 on a re-run of V1

80% and bar or bust ;)
Exactly
Some of my Keyboards -->
More
OTD Koala:  lubed 62g Old MX-Blacks   |   LZ-GH V2   |   KMAC2:  lubed 62g Tactile MX-Greys   |   LZ CLS s   |   X60:  lubed 62g Vintage MX-Blacks   |   GON NerD 60:  lubed 62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  lubed 62g MX-Clears  &  lubed  62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS ---->
More

Online UsualSuspectXXX

  • Posts: 3421
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [IC] LZ GH V2
« Reply #20 on: Mon, 15 January 2018, 19:06:15 »
+1 for 80 WKL with bar

Actually I'd like to see it looks like V1

+1 on a re-run of V1

80% and bar or bust ;)

If there's no chance of a 60% + F row, I'm completely in agreement with this!

Online fublamchu

  • Posts: 224
  • Location: sureño
  • ㅋㅋㅋ
Re: [IC] LZ GH V2
« Reply #21 on: Mon, 15 January 2018, 19:08:41 »
I'd be in for a rerun of the original  :) 80% and bar
LZ-CE VBlacks
910-CE

Online amnesia0287

  • Formerly Amnesia
  • Posts: 1171
Re: [IC] LZ GH V2
« Reply #22 on: Mon, 15 January 2018, 19:10:36 »
I'd definitely have to get a 65%. 75% would be interesting. Not interested at all in anything bigger.

Offline Dymloslouire

  • Posts: 306
  • Location: ****posting @ r/mk Discord
  • I Love TKL.
Re: [IC] LZ GH V2
« Reply #23 on: Mon, 15 January 2018, 19:47:43 »
84key. WKL.

STS Bottom.

Bar.

Angled.

:D

I had to choose LZ-GH or a college textbook from the original GB. I chose the textbook. I will not make the same mistake again.

+1 this.

Jane CE - Jane v2 - 910 RE - 910 RE Polycarbonate - Alice - 420CL - **RT80**

Online Puddsy

  • nice
  • * Exalted Elder
  • Posts: 9296
  • Location: North of the Mason-Dixon
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC] LZ GH V2
« Reply #24 on: Mon, 15 January 2018, 20:40:24 »
no bar pls

whatever else you do is OK by me

i was this bad tho

also yes 84key
« Last Edit: Mon, 15 January 2018, 21:01:10 by Puddsy »
QFR | MJ2 TKL | "Schumiboard" | "Bulgogiboard" (Keycon 104) | MIRA SE "2Y10M" | TGR Alice "Pink + White" | MEME "Sound Meme" | Keycult No 1 "The Brass Behemoth" | Southpaw Fullsize (when it ships) | Daily driver: TGR Alice

has puddsy gotten an award for person most involved with things hes not involved in at all, yet?

Offline lasermild

  • Posts: 13
Re: [IC] LZ GH V2
« Reply #25 on: Mon, 15 January 2018, 20:47:09 »
I'd definitely have to get a 65%. 75% would be interesting. Not interested at all in anything bigger.
+1 on this

Offline mindxthinker

  • Posts: 48
Re: [IC] LZ GH V2
« Reply #26 on: Mon, 15 January 2018, 20:57:24 »
84key. WKL.

STS Bottom.

Bar.

Angled.

Offline Jhors2

  • Posts: 113
Re: [IC] LZ GH V2
« Reply #27 on: Mon, 15 January 2018, 21:42:04 »
I'd definitely have to get a 65%. 75% would be interesting. Not interested at all in anything bigger.
+1 on this
+1 on this as well.
Duck Blackbird | Duck LSv3 | Duck Unicorn X Legend |  TX-75 | Mira SE | LZ-CP | LZ Iron | LZ Ergo | Duck Jet Fire | OTD 360 Corsa Apple Silver | TGR-910 CE

Incoming: Zeal Zephyr | Duck TC-V3 | Singa R2 | LZ GH v2 | Noxary 280 S | Noxary 220 S

Offline zzyjayfree

  • Posts: 429
  • Location: Canada
Re: [IC] LZ GH V2
« Reply #28 on: Mon, 15 January 2018, 22:16:05 »
80 BAR! 
OTD 360 Corsa w/ Nixdorf, OTD 356.2 DGE, Matrix 1.2, Matrix 2.0, Matrix Abel, Skog, Dolphin, EM7, Lynn Pad, Plank, LZ-RE, EqualZ, Orion v2, Octagon v2, Viper v2, Tank, Mira, Mira SE, Moon, Camp 225, Let's Split, HHKB, RealForce, Infinity Ergo, Cherry 3700, DolchPac, Nixdorf, Model M, Filcos.

Offline wixxzblu

  • Posts: 127
Re: [IC] LZ GH V2
« Reply #29 on: Mon, 15 January 2018, 22:48:40 »
75%

angeled & 8-9 degree angle

« Last Edit: Wed, 17 January 2018, 17:07:29 by wixxzblu »

Offline Tally810

  • Posts: 677
  • Location: Houston Texas
Re: [IC] LZ GH V2
« Reply #30 on: Mon, 15 January 2018, 23:28:33 »
80 bar

Sent from my Pixel 2 XL using Tapatalk


Offline nastrovje

  • Posts: 126
Re: [IC] LZ GH V2
« Reply #31 on: Mon, 15 January 2018, 23:42:20 »
If I'm allowed to dream a bit

Mirror Bottom.

Tungsten Bar.

80%, 75% or 60%.

Split spacebar support. Maybe even split into 3x 2u.

Full Mirror Finish. And darkest purple possible.

Offline bminhz

  • Posts: 114
  • Location: San Pellegrino
Re: [IC] LZ GH V2
« Reply #32 on: Tue, 16 January 2018, 01:21:42 »
84key. WKL.

STS Bottom.

Bar.

Angled.

+1 to this. No more 60% please

Offline rabbitfire

  • Posts: 231
  • Location: Rabbitfire102
Re: [IC] LZ GH V2
« Reply #33 on: Tue, 16 January 2018, 02:53:00 »
TKL or WKL

STS Bottom

« Last Edit: Tue, 16 January 2018, 03:36:00 by rabbitfire »

Offline hansichen

  • Posts: 192
  • Location: Germany
Re: [IC] LZ GH V2
« Reply #34 on: Tue, 16 January 2018, 03:33:00 »
TKL or WKL

STS Bottom

Wkl 122 key style sounds awesome  :thumb:

Offline rabbitfire

  • Posts: 231
  • Location: Rabbitfire102
Re: [IC] LZ GH V2
« Reply #35 on: Tue, 16 January 2018, 03:34:20 »

Online ricyuyc

  • Posts: 137
  • Location: HKG
Re: [IC] LZ GH V2
« Reply #36 on: Tue, 16 January 2018, 03:52:48 »
Duck Blackbird style with bottom bar?
Slim bezel KBD style IBM Model F AT with bottom bar?
186639-0


60% that top case and plate is machined in one-piece? (like that of PFU HHKB Pro)
« Last Edit: Tue, 16 January 2018, 03:55:47 by ricyuyc »

Offline Tom_Kazansky

  • Posts: 241
  • Location: Vietnam
  • Oblivion Knight
Re: [IC] LZ GH V2
« Reply #37 on: Tue, 16 January 2018, 04:00:02 »
How about something different?

186641-0

just an idea  :rolleyes: 

More
186643-1
"Any sufficiently advanced technology is indistinguishable from magic" - Arthur C. Clarke

Offline Tree_

  • Posts: 75
Re: [IC] LZ GH V2
« Reply #38 on: Tue, 16 January 2018, 05:00:30 »
Bar. Angled. Anything but a TKL or WKL.

Offline zekkin

  • Posts: 263
  • Location: USA
Re: [IC] LZ GH V2
« Reply #39 on: Tue, 16 January 2018, 05:24:06 »
84 layout would be nice. I'd also really like to see a light olive anodizing, like the TGR Jane.
Kyuu | QXP | TGR-910 RE PC | TGR-Alice | TGR-Jane v2

Offline jdcarpe

  • * Curator
  • Posts: 8856
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [IC] LZ GH V2
« Reply #40 on: Tue, 16 January 2018, 05:53:04 »
I think people are getting confused with the terminology used. “Bar” and “Angled” are two different options to accomplish the same goal, that being to raise the back of the keyboard to a certain angle from being parallel to the desk top.

The original LZ-GH had a bar foot.

An angled case bottom would serve the same purpose, as we see in other keyboard case designs.

If it’s to be called the LZ-GH v2, I would vote for a re-creation of the original, with its bar foot and mirrored stainless bottom plate. But I suggest different colors of anodizing, so as to distinguish the new version from the original. So, anything other than black, red, or grey.
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Online CommonCurt

  • * Esteemed Elder
  • Posts: 4469
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: [IC] LZ GH V2
« Reply #41 on: Tue, 16 January 2018, 06:48:04 »
I think people are getting confused with the terminology used. “Bar” and “Angled” are two different options to accomplish the same goal, that being to raise the back of the keyboard to a certain angle from being parallel to the desk top.

The original LZ-GH had a bar foot.

An angled case bottom would serve the same purpose, as we see in other keyboard case designs.

If it’s to be called the LZ-GH v2, I would vote for a re-creation of the original, with its bar foot and mirrored stainless bottom plate. But I suggest different colors of anodizing, so as to distinguish the new version from the original. So, anything other than black, red, or grey.
JD : )
Some of my Keyboards -->
More
OTD Koala:  lubed 62g Old MX-Blacks   |   LZ-GH V2   |   KMAC2:  lubed 62g Tactile MX-Greys   |   LZ CLS s   |   X60:  lubed 62g Vintage MX-Blacks   |   GON NerD 60:  lubed 62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  lubed 62g MX-Clears  &  lubed  62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS ---->
More


Offline YoungMichael88

  • HHKB Wannabe
  • * Elevated Elder
  • Posts: 1394
  • Location: Canada
  • After all, music soothes even the savage beast
Re: [IC] LZ GH V2
« Reply #43 on: Tue, 16 January 2018, 07:57:19 »
If this ends up being a 75% and the PCB is compatible with the original LZ-GH, could I get just the PCB?
Too Soon™          LZ-GH       Full Metal Poker

Online Helldrop

  • Posts: 113
  • Location: South Hell
Re: [IC] LZ GH V2
« Reply #44 on: Tue, 16 January 2018, 08:35:41 »
84 WKL with a bar foot, so as to revive the traditional shape of the original version.
Whatever you choose, I would support it.

Offline Jedi

  • Posts: 464
  • Location: 702
Re: [IC] LZ GH V2
« Reply #45 on: Tue, 16 January 2018, 08:44:39 »
If it’s to be called the LZ-GH v2, I would vote for a re-creation of the original, with its bar foot and mirrored stainless bottom plate.

I like how this man thinks :thumb: 

STS Mirror polished bottom, 80, STS plate, aluminum top, STS bar, Leeku L3 PCB.

Offline danielucf

  • Horrible Mailman
  • * Elevated Elder
  • Posts: 2392
  • Location: Orlando
  • Hmmmm beer.
Re: [IC] LZ GH V2
« Reply #46 on: Tue, 16 January 2018, 08:47:28 »
We already got an 80% LZ-GH, I think it should be something different. I love my VE.A and something similar but better would be an instant buy for me. Otherwise I will be excited for a quality 75% or 65%. I do sort of want a 90% for work though.

Sent from my Pixel 2 XL using Tapatalk

VE.A 67g Zealios | GH60 MX Clears | KBT Pure MX Reds |

Re: [IC] LZ GH V2
« Reply #47 on: Tue, 16 January 2018, 08:53:50 »
Same layout as VE.A with no split.. Something a little different, 75% with 10 macros to the left.. Would be v.nice!

Offline danielucf

  • Horrible Mailman
  • * Elevated Elder
  • Posts: 2392
  • Location: Orlando
  • Hmmmm beer.
Re: [IC] LZ GH V2
« Reply #48 on: Tue, 16 January 2018, 08:56:16 »
Split is life, so much more comfortable to type on

Sent from my Pixel 2 XL using Tapatalk

VE.A 67g Zealios | GH60 MX Clears | KBT Pure MX Reds |

Re: [IC] LZ GH V2
« Reply #49 on: Tue, 16 January 2018, 09:02:25 »
Split is life, so much more comfortable to type on

Sent from my Pixel 2 XL using Tapatalk
Or include the split, I dig that as well.. either way, love a 75% with the 10 on the left