Author Topic: [IC] LZ GH V2 ( Colors IC )  (Read 29415 times)

0 Members and 1 Guest are viewing this topic.

Offline Photoelectric

  • * Administrator
  • Posts: 6688
Re: [IC] LZ GH V2
« Reply #100 on: Thu, 18 January 2018, 09:53:37 »
I've assembled LOTS of customs now for others and myself, including 2 LZ-GH keyboards and some really dense chunks of metal like Lightsaver V1, and every keyboard does sound and feel differently.  But with that said, there's nothing resonating about my LZ-GH.  Maybe it's because I always approach keyboard assembly from the angle of picking the parts that make the most sense with each other, which means switches that feel and sound good on a particular keyboard.  My LZ-GH with soft Jailhouse Blues is very very quiet and well-dampened.  I also usually line the space under the PCB with a dampening mat of some sort, if space allows, which I've done with LZ-GH.  To each their own of course, but in my opinion this kit has an excellent unique design, and I love its weight distribution.
- Keyboards: LZ-GH (Jailhouse Blues)M65-a  ||  To be built: MIRA SE, E8-V1, MOON TKL
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline HoffmanMyster

  • HOFF, smol MAN OF MYSTERY
  • * Senior Moderator
  • Posts: 10449
  • Location: WI
Re: [IC] LZ GH V2
« Reply #101 on: Thu, 18 January 2018, 11:28:25 »
I also usually line the space under the PCB with a dampening mat of some sort, if space allows, which I've done with LZ-GH.  To each their own of course, but in my opinion this kit has an excellent unique design, and I love its weight distribution.

IIRC the LZ-GH shipped with a dampening mat, right? 

I don't use my LZ-GH daily, but it is my go-to kustom and I've never had an issue with resonating or anything of that sort.  I also use it on a pad on top of the desk if that matters. 

The only issue with the original run IMO was the debounce timing, but that was fixed in a firmware update.  Oh and the bar means it's way heavier in the back than the front, but I don't know why anyone would care about that once it's on the desk.

Offline Photoelectric

  • * Administrator
  • Posts: 6688
Re: [IC] LZ GH V2
« Reply #102 on: Thu, 18 January 2018, 11:39:05 »
Oh by weight distribution I meant that it's densest and heaviest along the bottom and lighter materials at the top, with the suspended plate/PCB. Makes for a softer typing experience even with the aluminum plate. Instead of a weight insert in the bottom center, there's a more uniform steel plate and the long leg.
I don't know if LZ-GH originally came with a mat--I got it without one (you know the story ;) )
- Keyboards: LZ-GH (Jailhouse Blues)M65-a  ||  To be built: MIRA SE, E8-V1, MOON TKL
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline jdcarpe

  • * Curator
  • Posts: 8856
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [IC] LZ GH V2
« Reply #103 on: Thu, 18 January 2018, 11:43:59 »
(you know the story ;) )

For those who don't, it's a great read! Keyboard Repair project: LZ-GH
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline dubious

  • 쏘쿨
  • Posts: 510
  • Location: shralpin the gnar
Re: [IC] LZ GH V2
« Reply #104 on: Thu, 18 January 2018, 12:35:10 »

Offline Unforgivable

  • Posts: 635
Re: [IC] LZ GH V2
« Reply #105 on: Thu, 18 January 2018, 13:00:11 »
(you know the story ;) )

For those who don't, it's a great read! Keyboard Repair project: LZ-GH

Wow, quite the journey. Thanks for the read!

Offline nsmechkb

  • Posts: 178
  • Location: ON, CA
Re: [IC] LZ GH V2
« Reply #106 on: Thu, 18 January 2018, 14:01:07 »
(I'd also love to see an LZ-RE v2 run.  The curves on its sides and the embedded bar are beautiful!)

Offline futurecrime

  • Posts: 642
  • Location: London, England
  • Probably tired right now.
Re: [IC] LZ GH V2
« Reply #107 on: Thu, 18 January 2018, 16:41:24 »
(you know the story ;) )

For those who don't, it's a great read! Keyboard Repair project: LZ-GH

Cool. I just learned a bunch of stuff.

Offline LifeZ

  • Thread Starter
  • Posts: 663
  • LifeZone
Re: [IC] LZ GH V2
« Reply #108 on: Thu, 18 January 2018, 18:11:21 »
I like the bar. Is it for aesthetic or also for feeling?

Show Image


My favourite is this, LZ RE, where you get both angle + bar  :thumb: :thumb:
Also love the bottom of it.
Hey, this is LZ GH V2  :p
RE , I hope to have a conversation next time.
LZ Limited
http://lzlife.tistory.com

LZ USB Cable (Mini b 5pin)
http://lzlife.tistory.com/407

Offline LifeZ

  • Thread Starter
  • Posts: 663
  • LifeZone
Re: [IC] LZ GH V2
« Reply #109 on: Thu, 18 January 2018, 18:14:28 »
I like the bar. Is it for aesthetic or also for feeling?

Show Image


My favourite is this, LZ RE, where you get both angle + bar  :thumb: :thumb:
Also love the bottom of it.
Hey, this IC, LZ GH V2  :p
RE , I hope to have a conversation next time. hahaaaaa
LZ Limited
http://lzlife.tistory.com

LZ USB Cable (Mini b 5pin)
http://lzlife.tistory.com/407

Online avid

  • Posts: 749
Re: [IC] LZ GH V2
« Reply #110 on: Thu, 18 January 2018, 18:24:16 »
 :D Ok, if chose one i think i prefer the bar!
« Last Edit: Thu, 18 January 2018, 18:39:30 by avid »

Offline zacheadams

  • Formerly known as mer6
  • Posts: 315
  • Location: Washington, DC
  • Friend
Re: [IC] LZ GH V2
« Reply #111 on: Thu, 18 January 2018, 18:42:45 »
If itís to be called the LZ-GH v2, I would vote for a re-creation of the original, with its bar foot and mirrored stainless bottom plate. But I suggest different colors of anodizing, so as to distinguish the new version from the original. So, anything other than black, red, or grey.

I'm with you 100%.

Offline Lastpilot

  • Power stance
  • * Esteemed Elder
  • Posts: 1455
  • Location: Louisiana
  • Inactive
Re: [IC] LZ GH V2
« Reply #112 on: Thu, 18 January 2018, 20:50:21 »
If itís to be called the LZ-GH v2, I would vote for a re-creation of the original, with its bar foot and mirrored stainless bottom plate. But I suggest different colors of anodizing, so as to distinguish the new version from the original. So, anything other than black, red, or grey.

I'm with you 100%.
+1

Offline amnesia0287

  • Formerly Amnesia
  • Posts: 1176
Re: [IC] LZ GH V2
« Reply #113 on: Fri, 19 January 2018, 03:59:26 »
I will be very sad if itís another TKL, just cause I wanna see what LZ would do with 65% and there is an abundance of tkl. It just seemed like he was asking about doing a new community board, not just rerunning an old one which is also more interesting to me. But Iím just not a TKL fan and realize many people are so there is no right answer.

Something else that could be interesting would be doing a kustom in the c70 layout. I wonder if GMK would let us have stabs. Probably too limiting for keysets to many I suppose.

Offline Helldrop

  • Posts: 126
  • Location: South Hell
Re: [IC] LZ GH V2
« Reply #114 on: Fri, 19 January 2018, 07:38:31 »
What a tremendous response! Given these enthusiasms and nostalgia for LZ-GH, original one must have been a masterpiece, though Iíve never seen it. Canít wait. GAZUA!

Offline bminhz

  • Posts: 114
  • Location: San Pellegrino
Re: [IC] LZ GH V2
« Reply #115 on: Fri, 19 January 2018, 07:51:12 »
If itís to be called the LZ-GH v2, I would vote for a re-creation of the original, with its bar foot and mirrored stainless bottom plate. But I suggest different colors of anodizing, so as to distinguish the new version from the original. So, anything other than black, red, or grey.

+1

Offline OracleKev

  • Posts: 249
Re: [IC] LZ GH V2
« Reply #116 on: Fri, 19 January 2018, 08:20:02 »
If itís to be called the LZ-GH v2, I would vote for a re-creation of the original, with its bar foot and mirrored stainless bottom plate. But I suggest different colors of anodizing, so as to distinguish the new version from the original. So, anything other than black, red, or grey.

I'm with you 100%.

+100%

Online avid

  • Posts: 749
Re: [IC] LZ GH V2
« Reply #117 on: Fri, 19 January 2018, 08:34:18 »
If itís to be called the LZ-GH v2, I would vote for a re-creation of the original, with its bar foot and mirrored stainless bottom plate. But I suggest different colors of anodizing, so as to distinguish the new version from the original. So, anything other than black, red, or grey.

+1

To distinguish from old version, wouldn't it just be easier to engrave v2? Both black + grey is very popular colors.

LZ, after CLS s&h, is this the keyboard you planning to run?
« Last Edit: Fri, 19 January 2018, 08:52:49 by avid »

Offline Mr_BeastQuake

  • Posts: 400
  • Location: Oregon
    • Reddit
Re: [IC] LZ GH V2
« Reply #118 on: Fri, 19 January 2018, 09:00:57 »
I think v2 would best be distinguished by flames across the base of the top portion and a dragon engraved on the weight.

Online CommonCurt

  • * Esteemed Elder
  • Posts: 4579
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: [IC] LZ GH V2
« Reply #119 on: Fri, 19 January 2018, 09:52:54 »
LZ, after CLS s&h, is this the keyboard you planning to run?

Also, wondering what kind of time frame we are looking at here.
I want to make sure that I'm ready  ;D
Some of my Keyboards -->
More
OTD Koala:  lubed 62g Old MX-Blacks   |   LZ-GH V2   |   KMAC2:  lubed 62g Tactile MX-Greys   |   LZ CLS s   |   X60:  lubed 62g Vintage MX-Blacks   |   GON NerD 60:  lubed 62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  lubed 62g MX-Clears  &  lubed  62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More

Offline Minha

  • Posts: 23
  • I Don't Want To Die Like Cobain
Re: [IC] LZ GH V2
« Reply #120 on: Mon, 22 January 2018, 04:57:26 »
I would love if an Alps plate/PCB option were to be available, we haven't seen a high end option for Alps in a while!

Offline jdcarpe

  • * Curator
  • Posts: 8856
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [IC] LZ GH V2
« Reply #121 on: Mon, 22 January 2018, 08:49:48 »
I would love if an Alps plate/PCB option were to be available, we haven't seen a high end option for Alps in a while!

I don't see why not. LZ made an Alps plate/PCB for the original LZ-GH after the GB was over (I have one), so surely they would bring that back as an option.
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Online autobot

  • Posts: 178
Re: [IC] LZ GH V2
« Reply #122 on: Wed, 24 January 2018, 00:02:17 »
To distinguish from old version, wouldn't it just be easier to engrave v2?

^ This all day!

TKL+WKL+Bar. Cyan anodizing option w/polished bottom! Go old school with it!

Offline nsmechkb

  • Posts: 178
  • Location: ON, CA
Re: [IC] LZ GH V2
« Reply #123 on: Wed, 24 January 2018, 00:25:36 »
To distinguish from old version, wouldn't it just be easier to engrave v2?

^ This all day!

TKL+WKL+Bar. Cyan anodizing option w/polished bottom! Go old school with it!

+1 for Cyan.  And that polished bottom is super nice.  Pic from Turkishrambo:


Online autobot

  • Posts: 178
Re: [IC] LZ GH V2
« Reply #124 on: Wed, 24 January 2018, 12:36:18 »
To distinguish from old version, wouldn't it just be easier to engrave v2?

^ This all day!

TKL+WKL+Bar. Cyan anodizing option w/polished bottom! Go old school with it!

+1 for Cyan.  And that polished bottom is super nice.  Pic from Turkishrambo:

Show Image


Does it have feet on the front edge? I donít see any on there. Adding a recess for feet pads could be a nice simple change for v2.
« Last Edit: Wed, 24 January 2018, 12:44:07 by autobot »

Online Puddsy

  • nice
  • * Elated Elder
  • Posts: 10120
  • Location: 方舟さくら丸
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC] LZ GH V2
« Reply #125 on: Wed, 24 January 2018, 14:36:09 »
To distinguish from old version, wouldn't it just be easier to engrave v2?

^ This all day!

TKL+WKL+Bar. Cyan anodizing option w/polished bottom! Go old school with it!

+1 for Cyan.  And that polished bottom is super nice.  Pic from Turkishrambo:

Show Image


Does it have feet on the front edge? I donít see any on there. Adding a recess for feet pads could be a nice simple change for v2.

no, just bumpons
QFR | MJ2 TKL | "Schumiboard" | "Bulgogiboard" (Keycon 104) | MIRA SE | TGR Alice | Southpaw Fullsize (when it ships) | Daily driver: TGR Alice

Puddsy's just a post ****

Offline mike52787

  • Posts: 1026
  • Location: South-West Florida
  • Alps Aficionado
Re: [IC] LZ GH V2
« Reply #126 on: Tue, 30 January 2018, 08:02:30 »
I would love if an Alps plate/PCB option were to be available, we haven't seen a high end option for Alps in a while!

I don't see why not. LZ made an Alps plate/PCB for the original LZ-GH after the GB was over (I have one), so surely they would bring that back as an option.
If the main design is the same I don't see why lz couldn't just use the old alps plate files, and on the same topic, we can use the same old plates.

Offline LifeZ

  • Thread Starter
  • Posts: 663
  • LifeZone
Re: [IC] LZ GH V2
« Reply #127 on: Tue, 30 January 2018, 09:26:42 »
I would love if an Alps plate/PCB option were to be available, we haven't seen a high end option for Alps in a while!

I don't see why not. LZ made an Alps plate/PCB for the original LZ-GH after the GB was over (I have one), so surely they would bring that back as an option.
If the main design is the same I don't see why lz couldn't just use the old alps plate files, and on the same topic, we can use the same old plates.
Have you not seen this?
https://geekhack.org/index.php?topic=80086.0
And i can make for lz gh v2 include alps plate option. No worries :)
LZ Limited
http://lzlife.tistory.com

LZ USB Cable (Mini b 5pin)
http://lzlife.tistory.com/407

Offline Signature

  • master of puppers
  • * Moderator
  • Posts: 1479
  • going sane
Re: [IC] LZ GH V2
« Reply #128 on: Tue, 30 January 2018, 09:33:53 »
+1 on the damping mat inside the case. I always got the feeling when I was typing that the case was hollow, but I was dumb enough not to put a mat in it so that will most likely solve all those problems. I also dig the OG design! So clean and timeless. Some suggestions for the GB would maybe be to include screws anodized to the same color as your case. Feel like that would spice up the back plate a notch. 

Online autobot

  • Posts: 178
Re: [IC] LZ GH V2
« Reply #129 on: Wed, 31 January 2018, 00:04:56 »
Iím struggling between cyan and gray, if those are options.

Please include option to buy extra alu case!

Offline Peiweisgreat

  • Posts: 148
  • Location: MD
Re: [IC] LZ GH V2
« Reply #130 on: Wed, 31 January 2018, 00:32:06 »
If we are going to avoid the original colors I would recommend going with something like dark green or maybe even the red from the singa75. Either way down for the end product.

Online CommonCurt

  • * Esteemed Elder
  • Posts: 4579
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: [IC] LZ GH V2
« Reply #131 on: Wed, 31 January 2018, 01:44:59 »
Preferred colors:  Blue-Grey,  Grey,  Olive Green
Some of my Keyboards -->
More
OTD Koala:  lubed 62g Old MX-Blacks   |   LZ-GH V2   |   KMAC2:  lubed 62g Tactile MX-Greys   |   LZ CLS s   |   X60:  lubed 62g Vintage MX-Blacks   |   GON NerD 60:  lubed 62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  lubed 62g MX-Clears  &  lubed  62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More

Online crtexcnndrm99

  • Posts: 341
  • Location: Brisbane, Australia
  • *profile image used without permission* ;)
Re: [IC] LZ GH V2
« Reply #132 on: Wed, 31 January 2018, 05:21:23 »
Colours? Black, silver, blue-grey and deep red


Sent from my iPhone using Tapatalk
You're a smooth smoothie, you know? ~ Gaear Grimsrud

Offline Photoelectric

  • * Administrator
  • Posts: 6688
Re: [IC] LZ GH V2
« Reply #133 on: Wed, 31 January 2018, 09:17:34 »
What, no one misses the "salmon red"?  :))
- Keyboards: LZ-GH (Jailhouse Blues)M65-a  ||  To be built: MIRA SE, E8-V1, MOON TKL
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline HoffmanMyster

  • HOFF, smol MAN OF MYSTERY
  • * Senior Moderator
  • Posts: 10449
  • Location: WI
Re: [IC] LZ GH V2
« Reply #134 on: Wed, 31 January 2018, 09:22:03 »
What, no one misses the "salmon red"?  :))

I actually really like that red.  :-[

Offline Photoelectric

  • * Administrator
  • Posts: 6688
Re: [IC] LZ GH V2
« Reply #135 on: Wed, 31 January 2018, 09:51:10 »
What, no one misses the "salmon red"?  :))

I actually really like that red.  :-[

I've never had an issue with it either, personally, and mine started out that color.  But it was rather infamous for the pink-salmonness, if you would.
- Keyboards: LZ-GH (Jailhouse Blues)M65-a  ||  To be built: MIRA SE, E8-V1, MOON TKL
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline HoffmanMyster

  • HOFF, smol MAN OF MYSTERY
  • * Senior Moderator
  • Posts: 10449
  • Location: WI
Re: [IC] LZ GH V2
« Reply #136 on: Wed, 31 January 2018, 09:59:51 »
What, no one misses the "salmon red"?  :))

I actually really like that red.  :-[

I've never had an issue with it either, personally, and mine started out that color.  But it was rather infamous for the pink-salmonness, if you would.

Well it was certainly an unexpected color, which I wasn't too keen on at first.  But once I got over that initial shock, I've grown to love it.  Either that or it's some sort of Stockholm Syndrome.  :))

Offline Signature

  • master of puppers
  • * Moderator
  • Posts: 1479
  • going sane
Re: [IC] LZ GH V2
« Reply #137 on: Wed, 31 January 2018, 13:06:16 »
I vote for Sifo Blue + black is too good to skip!

Online Puddsy

  • nice
  • * Elated Elder
  • Posts: 10120
  • Location: 方舟さくら丸
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC] LZ GH V2
« Reply #138 on: Wed, 31 January 2018, 16:04:34 »
What, no one misses the "salmon red"?  :))

it was great on the RE, GH not so much imo
QFR | MJ2 TKL | "Schumiboard" | "Bulgogiboard" (Keycon 104) | MIRA SE | TGR Alice | Southpaw Fullsize (when it ships) | Daily driver: TGR Alice

Puddsy's just a post ****

Offline nsmechkb

  • Posts: 178
  • Location: ON, CA
Re: [IC] LZ GH V2
« Reply #139 on: Thu, 01 February 2018, 09:22:43 »
What, no one misses the "salmon red"?  :))

it was great on the RE, GH not so much imo

Agreed.

+1 to silver and blue-grey.  I think silver would look good with the bar.

Online Puddsy

  • nice
  • * Elated Elder
  • Posts: 10120
  • Location: 方舟さくら丸
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC] LZ GH V2
« Reply #140 on: Fri, 02 February 2018, 18:34:02 »
What, no one misses the "salmon red"?  :))

it was great on the RE, GH not so much imo

Agreed.

+1 to silver and blue-grey.  I think silver would look good with the bar.

silver is ****ing ace
QFR | MJ2 TKL | "Schumiboard" | "Bulgogiboard" (Keycon 104) | MIRA SE | TGR Alice | Southpaw Fullsize (when it ships) | Daily driver: TGR Alice

Puddsy's just a post ****

Offline futurecrime

  • Posts: 642
  • Location: London, England
  • Probably tired right now.
Re: [IC] LZ GH V2
« Reply #141 on: Sun, 04 February 2018, 19:18:20 »
Maybe nice to see a lighter blue grey option, like this kind of thing:



(not my knife, just the first image result with the colour I was thinking of).

Would look real tasty with the brass bar.

Online CommonCurt

  • * Esteemed Elder
  • Posts: 4579
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: [IC] LZ GH V2
« Reply #142 on: Sun, 04 February 2018, 23:35:37 »
Maybe nice to see a lighter blue grey option, like this kind of thing:

Show Image


(not my knife, just the first image result with the colour I was thinking of).

Would look real tasty with the brass bar.

That would look pretty badass  :thumb:
Some of my Keyboards -->
More
OTD Koala:  lubed 62g Old MX-Blacks   |   LZ-GH V2   |   KMAC2:  lubed 62g Tactile MX-Greys   |   LZ CLS s   |   X60:  lubed 62g Vintage MX-Blacks   |   GON NerD 60:  lubed 62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  lubed 62g MX-Clears  &  lubed  62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More

Offline bit-shifter

  • Posts: 11
  • Location: UK
Re: [IC] LZ GH V2
« Reply #143 on: Wed, 07 February 2018, 07:37:37 »
Maybe nice to see a lighter blue grey option, like this kind of thing:

Show Image


(not my knife, just the first image result with the colour I was thinking of).

Would look real tasty with the brass bar.

That would look pretty badass  :thumb:

...and capped with MiTo's Canvas - that would be amazing!

Offline idlemao

  • Posts: 105
  • Location: City of Angels
Re: [IC] LZ GH V2
« Reply #144 on: Wed, 07 February 2018, 17:14:43 »
I think I've come around to not having a bar, but at the same time the bar seems to be an iconic part of it. Either way, at least let there be a dark gray color.

Offline hayt

  • * Maker
  • Posts: 608
  • Location: Atlanta
Re: [IC] LZ GH V2
« Reply #145 on: Tue, 13 February 2018, 20:35:29 »
+1 for bar.

Would love 84 WKL in Black w/ polished bottom. Also liked the idea of hiding the exposed screws.

Online exitfire401

  • * Global Moderator
  • Posts: 2942
  • Location: United States
  • The Force is Re/\l
Re: [IC] LZ GH V2
« Reply #146 on: Tue, 13 February 2018, 20:57:48 »
Can't believe I missed this thread...my vote goes to 75% and bar.
Boards: Kingsaver Complicated Blue Alps |Sprit 60% Transparent MX Clears in Gateron housings with 62g gold Sprit springs lubed and RGB color shifting LEDs | Ducky Shine Zone MX Black with Blue LEDs | Realforce 10AE Variable Silenced

B/S/T thread: https://geekhack.org/index.php?topic=55351.0

Past projects: KBT Race 2 L.E.
Past Boards: Ducky Shine 2 | KBT Pure | LZ Aluminum Skin| HHKB | Realforce 23u |

Offline LifeZ

  • Thread Starter
  • Posts: 663
  • LifeZone
Re: [IC] LZ GH V2
« Reply #147 on: Tue, 13 February 2018, 22:28:31 »
GH WINKEYLESS  ;D
188869-0

188871-1
LZ Limited
http://lzlife.tistory.com

LZ USB Cable (Mini b 5pin)
http://lzlife.tistory.com/407

Offline hayt

  • * Maker
  • Posts: 608
  • Location: Atlanta
Re: [IC] LZ GH V2
« Reply #148 on: Tue, 13 February 2018, 22:36:54 »

Online CommonCurt

  • * Esteemed Elder
  • Posts: 4579
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Some of my Keyboards -->
More
OTD Koala:  lubed 62g Old MX-Blacks   |   LZ-GH V2   |   KMAC2:  lubed 62g Tactile MX-Greys   |   LZ CLS s   |   X60:  lubed 62g Vintage MX-Blacks   |   GON NerD 60:  lubed 62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  lubed 62g MX-Clears  &  lubed  62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More