Author Topic: [GB] SX60 Split 60% Keyboard  (Read 14663 times)

0 Members and 1 Guest are viewing this topic.

Online Quantastrophus

  • Thread Starter
  • Posts: 116
[GB] SX60 Split 60% Keyboard
« on: Mon, 22 January 2018, 00:50:31 »
Current Status: Order Submitted to Factory. 2/1/2018

Prototype:



Album: https://imgur.com/a/hhljr
More Pics: https://imgur.com/gallery/5NiVe



Anodizing Colors (Silver will also be available):



Color Options:
  • Rose Gold
  • Gray
  • Black
  • Silver

Plate:
  • Brass or Aluminum
  • Sandwiched
  • Supported Layouts
  • I'm open to accommodating more layouts. Please contact me after raffle phase

PCB:
  • QMK
  • USB Type-C port for all connections
    • Left Half plugs into Computer
    • Left and Right Half plug into each other
  • In Switch LED Backlighting
  • Only switch soldering required

Price (fees + shipping not included):
  • Case - $350
    • 1x Top Left (Aluminum 6063)
    • 1x Top Right (Aluminum 6063)
    • 1x Bottom Left (Aluminum 6063)
    • 1x Bottom Right (Aluminum 6063)
    • 1x Weight Left (Brass)
    • 1x Weight Right (Brass)
    • 1x Screws for Assembly (M3 Hex Countersunk)
    • 8x 3m Bumpons (8mm round)
  • Plate - $40
  • PCB - $45


Please feel free to email me at: sx60keyboard@gmail.com with any personal questions

If anyone wants more photos of anything feel free to ask me as well. I'll happily take more photos!

« Last Edit: Thu, 01 February 2018, 23:43:03 by Quantastrophus »

Offline ghostjuggernaut

  • ** Moderator Emeritus
  • Posts: 3485
  • Location: Maryland
  • Retired
Re: [GB] SX60 Split 60% Keyboard
« Reply #1 on: Tue, 23 January 2018, 19:44:31 »
Approval bump  :thumb:

As always, caveat emptor.
               

Offline FoC_Tow

  • * Destiny Supporter
  • Posts: 1107
  • Location: Germany
  • Brokehlicious
Re: [GB] SX60 Split 60% Keyboard
« Reply #2 on: Tue, 23 January 2018, 20:07:09 »
Filled the form cause I really love the case.

Reddit ppl are raging a bit too much over the price imo, but itís definitely very Steep.

If you could really offer an 350 or less no weight option that would be very much preferred.

Incase it adds cost, you could also remove the triangle dots logo imo.


I really just hope the hole price debate doesnít kill your interest in running this, because I would very much love to get one.

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #3 on: Tue, 23 January 2018, 20:31:45 »
Filled the form cause I really love the case.

Reddit ppl are raging a bit too much over the price imo, but itís definitely very Steep.

If you could really offer an 350 or less no weight option that would be very much preferred.

Incase it adds cost, you could also remove the triangle dots logo imo.


I really just hope the hole price debate doesnít kill your interest in running this, because I would very much love to get one.

Reddit will be reddit...

By removing the weight I think it would be possible to get the price down to around $350 but I am hoping to not have to do that.  Removing the triangle dot logo that you don't like won't decrease the price unfortunately  ;)

I'm running this as long as I get at least 20 orders which I don't think will be a problem.

Offline MajorKoos

  • Posts: 529
  • Location: Bay Area
  • 1 life please. Extra large.
Re: [GB] SX60 Split 60% Keyboard
« Reply #4 on: Tue, 23 January 2018, 20:35:09 »
Filled the form cause I really love the case.

Reddit ppl are raging a bit too much over the price imo, but itís definitely very Steep.

If you could really offer an 350 or less no weight option that would be very much preferred.

Incase it adds cost, you could also remove the triangle dots logo imo.


I really just hope the hole price debate doesnít kill your interest in running this, because I would very much love to get one.

It's all down to machine time, tool changes, positioning the work piece, etc.
Each case is double the usual number of parts, so double the number of tool changes, etc which kills the price.
The VE.A suffered from the same issue.

Offline lunr

  • Posts: 131
  • Location: Canada
Re: [GB] SX60 Split 60% Keyboard
« Reply #5 on: Tue, 23 January 2018, 20:49:44 »
Took me like 10 minutes clicking around to find the form without realizing the font was white :\

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #6 on: Tue, 23 January 2018, 20:53:43 »
Took me like 10 minutes clicking around to find the form without realizing the font was white :\

Updated to hopefully make it more visible  :thumb:

Offline Unforgivable

  • Posts: 619
Re: [GB] SX60 Split 60% Keyboard
« Reply #7 on: Tue, 23 January 2018, 22:28:22 »
Looks really cool. Do you have any side photos of the board?

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #8 on: Tue, 23 January 2018, 22:33:05 »
Looks really cool. Do you have any side photos of the board?

https://imgur.com/gallery/5NiVe

Note that there are a few mistakes in the USB holes that will be fixed in the final design (different heights).  I'm also considering make them more elegant.
« Last Edit: Tue, 23 January 2018, 22:37:06 by Quantastrophus »

Online Pemdas

  • Posts: 527
  • Location: Vancouver, WA
  • (づ ̄ ≥ ̄)づ ᶠᶫᵒᵃᵗᶦᶰᵍ ᶫᶦᵏᵉ ᵃ ᵇᵘᵗᵗᵉʳᶠᶫʸ
Re: [GB] SX60 Split 60% Keyboard
« Reply #9 on: Tue, 23 January 2018, 22:53:13 »
Filled out the form. Board looks very interesting :thumb:

Are there any tenting options? Or maybe some aluminum feet to give it an angle?
Current Daily Driver: Blue Mira SE w/ Tealios

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #10 on: Tue, 23 January 2018, 23:05:00 »
Filled out the form. Board looks very interesting :thumb:

Are there any tenting options? Or maybe some aluminum feet to give it an angle?

I had mixed feedback on designing a tenting kit during the interest check phase. I'll probably run another IC with the GB participants. If 10 or more people want one then I'll design one.

Offline blacksimon

  • Posts: 58
Re: [GB] SX60 Split 60% Keyboard
« Reply #11 on: Wed, 24 January 2018, 00:22:30 »
I don't like your non korean boards
« Last Edit: Wed, 24 January 2018, 00:30:35 by blacksimon »

Online PandaRooooong

  • Posts: 13
Re: [GB] SX60 Split 60% Keyboard
« Reply #12 on: Wed, 24 January 2018, 02:16:25 »
Any brass plate sample photo?
Hard to choose al or brass

Also, did pcb support this layout?
« Last Edit: Wed, 24 January 2018, 05:22:39 by PandaRooooong »

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #13 on: Wed, 24 January 2018, 12:07:05 »
Any brass plate sample photo?
Hard to choose al or brass

Also, did pcb support this layout?



Yes I can support that layout on the PCB and plate

Offline WilySouser

  • Posts: 23
  • I would RTFM, but I can't find the FM
Re: [GB] SX60 Split 60% Keyboard
« Reply #14 on: Wed, 24 January 2018, 15:55:41 »
Also, did pcb support this layout?

Form filled under my reddit name, but I, too, would like this layout.

Online Pemdas

  • Posts: 527
  • Location: Vancouver, WA
  • (づ ̄ ≥ ̄)づ ᶠᶫᵒᵃᵗᶦᶰᵍ ᶫᶦᵏᵉ ᵃ ᵇᵘᵗᵗᵉʳᶠᶫʸ
Re: [GB] SX60 Split 60% Keyboard
« Reply #15 on: Wed, 24 January 2018, 17:41:21 »
Invoice paid. Been wanting to try out the split staggered layout ever since I missed out on the VE.A :thumb:

Have a few more questions.

1) Any expected ship date?

2) Does the pcb fit hotlite sockets for switch swapping? Specifically zeals.

3) Will cables be included or will we have to get those elsewhere?

4) Can we get blank weights? I enjoy getting custom things engraved on my weights.

Current Daily Driver: Blue Mira SE w/ Tealios

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #16 on: Wed, 24 January 2018, 19:20:35 »
Invoice paid. Been wanting to try out the split staggered layout ever since I missed out on the VE.A :thumb:

Have a few more questions.

1) Any expected ship date?

2) Does the pcb fit hotlite sockets for switch swapping? Specifically zeals.

3) Will cables be included or will we have to get those elsewhere?

4) Can we get blank weights? I enjoy getting custom things engraved on my weights.

1) Factory quoted me around 1 month to have the units complete but Chinese New Year is in the middle so we will see.
2) I'll have to check
3) I will include cables
4) I will offer blank weights if there is enough interest from GB members. (5 or more)

Offline WilySouser

  • Posts: 23
  • I would RTFM, but I can't find the FM
Re: [GB] SX60 Split 60% Keyboard
« Reply #17 on: Wed, 24 January 2018, 19:37:42 »
ergh, paid but screwed up my ship to address.  How can I change this?

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #18 on: Wed, 24 January 2018, 19:39:42 »
ergh, paid but screwed up my ship to address.  How can I change this?

Please email me. sx60keyboard@gmail.com

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #19 on: Thu, 25 January 2018, 12:57:24 »
I had time to take some more photos of the keyboard.





Album: https://imgur.com/gallery/aYutU#hZZHrRr

Offline Captainbuttmonkey

  • Posts: 246
  • Location: UK
Re: [GB] SX60 Split 60% Keyboard
« Reply #20 on: Thu, 25 January 2018, 13:20:30 »
Looks really cool. Do you have any side photos of the board?

https://imgur.com/gallery/5NiVe

Note that there are a few mistakes in the USB holes that will be fixed in the final design (different heights).  I'm also considering make them more elegant.

Lmao, why do I find that imgur comment so funny  :))

Offline WilySouser

  • Posts: 23
  • I would RTFM, but I can't find the FM
Re: [GB] SX60 Split 60% Keyboard
« Reply #21 on: Thu, 25 January 2018, 13:45:33 »
Show Image


Is the (actual)shift on the right a 1.75 or 2?

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #22 on: Thu, 25 January 2018, 14:03:32 »
It's a 1.75u from the GMK Carbon set.

Online Pemdas

  • Posts: 527
  • Location: Vancouver, WA
  • (づ ̄ ≥ ̄)づ ᶠᶫᵒᵃᵗᶦᶰᵍ ᶫᶦᵏᵉ ᵃ ᵇᵘᵗᵗᵉʳᶠᶫʸ
Re: [GB] SX60 Split 60% Keyboard
« Reply #23 on: Thu, 25 January 2018, 14:51:20 »
1) Factory quoted me around 1 month to have the units complete but Chinese New Year is in the middle so we will see.
2) I'll have to check
3) I will include cables
4) I will offer blank weights if there is enough interest from GB members. (5 or more)

Wow that's some quick turnaround! Thanks for the answers  :thumb:
Current Daily Driver: Blue Mira SE w/ Tealios

Offline mgsickler

  • Posts: 144
Re: [GB] SX60 Split 60% Keyboard
« Reply #24 on: Thu, 25 January 2018, 18:08:24 »
Iím in on this. Board looks great. Price is a little high, but I think itíll be worth it.

Online finalarcadia

  • Posts: 154
Re: [GB] SX60 Split 60% Keyboard
« Reply #25 on: Thu, 25 January 2018, 23:30:22 »
Any brass plate sample photo?
Hard to choose al or brass

Also, did pcb support this layout?

Show Image


Yes I can support that layout on the PCB and plate

Will be able to get this exact plate as pictured? Don't like swiss cheese plates.

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #26 on: Thu, 25 January 2018, 23:31:45 »
I have extras of this plate if you would like one like this as opposed to swiss cheese version  :thumb:.

Offline lunr

  • Posts: 131
  • Location: Canada
Re: [GB] SX60 Split 60% Keyboard
« Reply #27 on: Fri, 26 January 2018, 16:49:21 »
stuck at 11?

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #28 on: Fri, 26 January 2018, 19:35:37 »
stuck at 11?

Nope a few more invoices have been sent out. Will update.

We are over 20 orders, so this GB will run regardless of whether we hit the limit of 30 or not.
« Last Edit: Fri, 26 January 2018, 19:38:34 by Quantastrophus »

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #29 on: Mon, 29 January 2018, 01:06:42 »
Hi all,

Just wanted to give an update on my plans for the GB:

  • The GB will close for orders on Friday. Minimum Order Quantity has been reached.
  • CONUS orders will receive free shipping.
  • International orders will receive something else to compensate or can have $25 taken off their shipping quote.
  • I'm working with a community vendor to create wooden tenting kits. Please email directly if you are interested I will be sure to get the pricing out when I have it. The vendor I'm working with makes really high quality products but isn't set up to take on a ton of orders so these will be limited. I will raffle them off to GB members who are interested. I will also release the CAD files if you would like to have your own made by some other means.

Thanks to all who are supporting this buy. I'm very excited to get these boards out to everyone and I think all who joined will be impressed.

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #30 on: Thu, 01 February 2018, 23:41:47 »
Hi all,

The GB is closed for entry and the order has been submitted to the factory.

To all that have joined I will be giving, at minimum, weekly updates on the status of the boards.  I look forward to seeing this project to completion :D.

Thanks.

Offline WilySouser

  • Posts: 23
  • I would RTFM, but I can't find the FM
Re: [GB] SX60 Split 60% Keyboard
« Reply #31 on: Mon, 05 February 2018, 14:33:31 »
Shot you an email about getting this layout.  Not sure how often you check mail, just wanted to make sure I got the request to you in time.

188020-0

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #32 on: Mon, 05 February 2018, 17:24:18 »
Shot you an email about getting this layout.  Not sure how often you check mail, just wanted to make sure I got the request to you in time.

(Attachment Link)

I submited files for the order to the factory without this layout. That being said manufacturing is not going to start until after CNY. I will get in touch with the factory tonight and see if I can update the file for the right half of the plate.

I doubt that they have starting programming the machines and I know machining hasn't started, so I don't see this change being a problem and will keep you posted.

Offline Darknight00z

  • Posts: 185
  • Location: UK
Re: [GB] SX60 Split 60% Keyboard
« Reply #33 on: Fri, 09 February 2018, 02:45:56 »
Sent you an email.

Offline WilySouser

  • Posts: 23
  • I would RTFM, but I can't find the FM
Re: [GB] SX60 Split 60% Keyboard
« Reply #34 on: Thu, 15 February 2018, 17:33:37 »
Shot you an email about getting this layout.  Not sure how often you check mail, just wanted to make sure I got the request to you in time.

(Attachment Link)

I submited files for the order to the factory without this layout. That being said manufacturing is not going to start until after CNY. I will get in touch with the factory tonight and see if I can update the file for the right half of the plate.

I doubt that they have starting programming the machines and I know machining hasn't started, so I don't see this change being a problem and will keep you posted.

Thanks for that.  Out of hardware planning curiosity, can this take LEDs or not?  I assume it doesn't.

Offline mdaly001

  • Posts: 15
Re: [GB] SX60 Split 60% Keyboard
« Reply #35 on: Fri, 16 February 2018, 01:04:43 »
The OP says in switch LEDs but I'm not sure what that means?

Sent from my ONEPLUS A5010 using Tapatalk


Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 4548
  • Location: United Kingdom
Re: [GB] SX60 Split 60% Keyboard
« Reply #36 on: Fri, 16 February 2018, 17:17:48 »
The OP says in switch LEDs but I'm not sure what that means?


Offline mdaly001

  • Posts: 15
Re: [GB] SX60 Split 60% Keyboard
« Reply #37 on: Fri, 16 February 2018, 17:47:50 »
The OP says in switch LEDs but I'm not sure what that means?

Show Image

Ohh so like normal leds in a switch? Haha I was thinking it was something I hadn't heard of


Sent from my ONEPLUS A5010 using Tapatalk


Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #38 on: Sat, 17 February 2018, 09:49:38 »
The OP says in switch LEDs but I'm not sure what that means?

Show Image


Yes, these are in switch LEDs  :thumb:.

Update:

I wasn't able to get in touch with the manufacturing before CNY about changing the layout on the right half of the plate to support the shift -> arrow -> ? layout option. I will attempt to contact them again when they are back from holiday.

If you really want this layout PM me and we'll work something out. Thanks all!

Offline WilySouser

  • Posts: 23
  • I would RTFM, but I can't find the FM
Re: [GB] SX60 Split 60% Keyboard
« Reply #39 on: Tue, 20 February 2018, 16:10:59 »
If you really want this layout PM me and we'll work something out. Thanks all!

Shot you a PM

Offline mdaly001

  • Posts: 15
Re: [GB] SX60 Split 60% Keyboard
« Reply #40 on: Wed, 21 February 2018, 08:09:40 »
Does anybody have any recommendations on tenting solutions?

Sent from my ONEPLUS A5010 using Tapatalk


Offline Puddsy

  • Baseball Dad
  • * Exalted Elder
  • Posts: 8835
  • Location: North of the Mason-Dixon
  • Clockmaker
Re: [GB] SX60 Split 60% Keyboard
« Reply #41 on: Wed, 21 February 2018, 11:16:41 »
Does anybody have any recommendations on tenting solutions?

Sent from my ONEPLUS A5010 using Tapatalk

3d print
QFR | MJ2 TKL | Realforce 87U | G81-3000 "Schumiboard" | Varmilo Bulgogiboard (Keycon 104) | KBD75 | MIRA (Clearsuns) | Weaven (MOD-M) | TGR Alice (soon!) | A secret board

has puddsy gotten an award for person most involved with things hes not involved in at all, yet?

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #42 on: Wed, 21 February 2018, 20:53:44 »
Does anybody have any recommendations on tenting solutions?

Sent from my ONEPLUS A5010 using Tapatalk

I'm going to be working with a vendor for a small run of wooden tenting kits. Let me know if you're interested.

Offline mdaly001

  • Posts: 15
Re: [GB] SX60 Split 60% Keyboard
« Reply #43 on: Wed, 21 February 2018, 20:54:08 »
Does anybody have any recommendations on tenting solutions?

Sent from my ONEPLUS A5010 using Tapatalk

I'm going to be working with a vendor for a small run of wooden tenting kits. Let me know if you're interested.
Super interested!

Sent from my ONEPLUS A5010 using Tapatalk


Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #44 on: Tue, 06 March 2018, 09:48:43 »
Update:

Cases:
- Looks like the factory is slowly getting back to work this week and part of last week. Production has still not started on the cases but I expect it to start this month.

Tenting Kits:
- Finalizing the design on the tenting kits and will get in touch with mah boi to try and get some made.

Feel free to post questions in here or email/message me if you guys want more updates.

Thanks!

Offline FoC_Tow

  • * Destiny Supporter
  • Posts: 1107
  • Location: Germany
  • Brokehlicious
Re: [GB] SX60 Split 60% Keyboard
« Reply #45 on: Tue, 06 March 2018, 13:05:01 »
Stoked to see the tenting kit design!

Definitely down for two <3


Online PandaRooooong

  • Posts: 13
Re: [GB] SX60 Split 60% Keyboard
« Reply #46 on: Thu, 08 March 2018, 01:45:53 »
Any tenting kit sample photo for reference?
Quite interesting

Offline Darknight00z

  • Posts: 185
  • Location: UK
Re: [GB] SX60 Split 60% Keyboard
« Reply #47 on: Thu, 08 March 2018, 08:28:11 »
If anyone is looking to unload their spot, please let me know. I'll take silver, black, grey.

Offline lunr

  • Posts: 131
  • Location: Canada
Re: [GB] SX60 Split 60% Keyboard
« Reply #48 on: Thu, 08 March 2018, 10:36:21 »
I'm looking to sell my spot. If anyone is interested, please message me. The colour is Grey.

edit - spot not available.
« Last Edit: Thu, 10 May 2018, 19:48:48 by lunr »

Online finalarcadia

  • Posts: 154
Re: [GB] SX60 Split 60% Keyboard
« Reply #49 on: Thu, 08 March 2018, 18:47:50 »
Also looking to transfer my spot, pm if interested. Gray.

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #50 on: Mon, 12 March 2018, 22:18:46 »
Hi All,

Another update! Boards are currently being CNC'd.

Let me know if you're curious about anything else.

Offline mgsickler

  • Posts: 144
Re: [GB] SX60 Split 60% Keyboard
« Reply #51 on: Wed, 14 March 2018, 13:54:07 »
Hi All,

Another update! Boards are currently being CNC'd.

Let me know if you're curious about anything else.

Good to know! I am pretty excited to get mine.

Offline inter

  • Posts: 1
Re: [GB] SX60 Split 60% Keyboard
« Reply #52 on: Sat, 17 March 2018, 08:33:06 »
Will there be any extras available for purchase? I am really disappointed I missed this buy.

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #53 on: Sat, 17 March 2018, 10:43:40 »
Will there be any extras available for purchase? I am really disappointed I missed this buy.

There are 2 extras being made. I'm not sure if I'm going to sell them or keep them at this time.

Offline mdaly001

  • Posts: 15
Re: [GB] SX60 Split 60% Keyboard
« Reply #54 on: Sun, 18 March 2018, 02:11:19 »
I ordered a gray I think I am down to let go of. Just pm me if interested

Sent from my ONEPLUS A5010 using Tapatalk


Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #55 on: Sat, 31 March 2018, 11:54:59 »
Hi All,

Another update for everyone. Currently the Tops/Plates/80% Bottom have finished CNC. So we just have a few more bottoms and the Weights before the parts go to anodizing. Let me know if you have any other questions!

Thanks

Offline nsbirl

  • Posts: 4
Re: [GB] SX60 Split 60% Keyboard
« Reply #56 on: Sat, 31 March 2018, 20:02:45 »
I really would like to get in on this. If anyoneís interested in giving up their spot please let me know!


Sent from my iPhone using Tapatalk

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #57 on: Fri, 13 April 2018, 15:59:25 »
Hi All,

If you are interested in a tenting kit please PM me. There will be 5 available and they will be $100 each shipped to you. They will be made of walnut by woodkeys.click!

Thanks

Offline spiritjeon

  • Posts: 21
Re: [GB] SX60 Split 60% Keyboard
« Reply #58 on: Fri, 13 April 2018, 19:34:55 »
Hi All,

If you are interested in a tenting kit please PM me. There will be 5 available and they will be $100 each shipped to you. They will be made of walnut by woodkeys.click!

Thanks
Pm'd!! Plz give me one. XD

Offline Darknight00z

  • Posts: 185
  • Location: UK
Re: [GB] SX60 Split 60% Keyboard
« Reply #59 on: Sat, 14 April 2018, 00:00:33 »
Can we get some images of the tenting kits. If not, at least a rendering/ drawings of them please. Thanks!

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #60 on: Sat, 14 April 2018, 00:18:33 »
Can we get some images of the tenting kits. If not, at least a rendering/ drawings of them please. Thanks!

Of course!

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #61 on: Wed, 18 April 2018, 13:19:38 »
Hi All,

The boards have finished anodizing but my contact found defects in 1 of the gray boards and 1 of the black boards.  We'll wait for those 2 boards to be redone and then the boards will be shipped to me!

Here are some pictures to tease you a little bit  :p.

Gray:


Rose Gold:


Thanks!

Offline Darknight00z

  • Posts: 185
  • Location: UK
Re: [GB] SX60 Split 60% Keyboard
« Reply #62 on: Wed, 18 April 2018, 18:13:05 »
Awesome! Can't wait.

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #63 on: Wed, 18 April 2018, 20:47:56 »
Hi All,

Looks like the rework happened sooner than I expected and the boards will ship today :).  Also, for the list of people who wanted the arrows layout I have jaymaikan, PandaRooooong, WilySouser, and spiritjeon.  Please PM if you want the arrow layout so I can discuss with you.

Thanks!

Offline mgsickler

  • Posts: 144
Re: [GB] SX60 Split 60% Keyboard
« Reply #64 on: Wed, 18 April 2018, 21:44:09 »
Hi All,

Looks like the rework happened sooner than I expected and the boards will ship today :).  Also, for the list of people who wanted the arrows layout I have jaymaikan, PandaRooooong, WilySouser, and spiritjeon.  Please PM if you want the arrow layout so I can discuss with you.

Thanks!


Thatís great! Thanks for the update.

Online PandaRooooong

  • Posts: 13
Re: [GB] SX60 Split 60% Keyboard
« Reply #65 on: Thu, 19 April 2018, 00:10:20 »
Hi All,

Looks like the rework happened sooner than I expected and the boards will ship today :).  Also, for the list of people who wanted the arrows layout I have jaymaikan, PandaRooooong, WilySouser, and spiritjeon.  Please PM if you want the arrow layout so I can discuss with you.

Thanks!
Good to see that update :D
Seems receive it in next month ;D

Offline midnight2903

  • Posts: 323
  • Location: Singapore
Re: [GB] SX60 Split 60% Keyboard
« Reply #66 on: Sun, 22 April 2018, 02:05:22 »
DELETED
« Last Edit: Mon, 23 April 2018, 03:05:57 by midnight2903 »

Offline Darknight00z

  • Posts: 185
  • Location: UK
Re: [GB] SX60 Split 60% Keyboard
« Reply #67 on: Wed, 25 April 2018, 18:52:44 »
Have you received the boards?

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #68 on: Wed, 25 April 2018, 21:47:25 »
Have you received the boards?

Slow down cowboy :cool:. The boards are expected to arrive on Friday.  Then it will be a little bit more time for the PCBs. I have all the packing material, screws, bumpons ready to go.

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #69 on: Tue, 01 May 2018, 13:49:56 »
Hi All,

Currently half the boards are stuck in customs so the entire shipment is being held up until they are released. FedEx has said there is nothing I can do from my end :/.  I'll keep everyone updated and bother FedEx daily :).

Thanks!

Offline FoC_Tow

  • * Destiny Supporter
  • Posts: 1107
  • Location: Germany
  • Brokehlicious
Re: [GB] SX60 Split 60% Keyboard
« Reply #70 on: Tue, 01 May 2018, 16:48:02 »
Thx for the update man!

Online Acereconkeys

  • Posts: 156
Re: [GB] SX60 Split 60% Keyboard
« Reply #71 on: Wed, 02 May 2018, 02:27:35 »
Damn just saw this so sad I missed it.

Offline midnight2903

  • Posts: 323
  • Location: Singapore
Re: [GB] SX60 Split 60% Keyboard
« Reply #72 on: Wed, 02 May 2018, 04:29:56 »
Damn just saw this so sad I missed it.

i think there are a few ppl selling their spots

Offline FoC_Tow

  • * Destiny Supporter
  • Posts: 1107
  • Location: Germany
  • Brokehlicious
Re: [GB] SX60 Split 60% Keyboard
« Reply #73 on: Wed, 02 May 2018, 14:06:09 »
If anyone is looking to sell their spot, shoot me a Pm <3

Strongly considering a second board for work =)

Offline Darknight00z

  • Posts: 185
  • Location: UK
Re: [GB] SX60 Split 60% Keyboard
« Reply #74 on: Mon, 07 May 2018, 12:45:31 »
What size are the spacebars? 2.25u and 2.75u?

Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 4548
  • Location: United Kingdom
Re: [GB] SX60 Split 60% Keyboard
« Reply #75 on: Mon, 07 May 2018, 12:53:20 »
What size are the spacebars? 2.25u and 2.75u?

2u and 2.75u

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #76 on: Thu, 10 May 2018, 11:50:16 »
Hi All,

Picked up the boards from the post office yesterday and did QC and initlal packing for all of them.

Some problems I want to make you all aware of:

  • 5 of the weights for the left half of the board do not fit properly. I am getting replacements for these. Orders will be fulfilled in the order in which they were placed. I will notify you if you will have delayed shipment.
  • The manufacturer pulled kind of a bait and switch on me with regards to the overall quality of the boards.  The multiple prototypes I have received are flawless from the inside to the outside. The outside of the boards are flawless and look amazing, but there are visible tooling marks on the insides of the boards. Obviously these are not visible when the boards are assembled but I want to make you all aware and see your thoughts.
  • The PCBs are in assembly right now and should be in my hands next week. I will receive them and then flash the QMK firmware and verify all of the buttons are working as desired.
  • The cables are arriving this week

Thanks for being patient with the group buy I hope to start fulfilling orders in the coming weeks!

Offline prestonmechs

  • Posts: 1
Re: [GB] SX60 Split 60% Keyboard
« Reply #77 on: Thu, 10 May 2018, 12:33:50 »
Hey all,

Just made an account specifically for this keyboard (I've been stalking for years)! Does anyone have a spot they're willing to give up? Super interested. Thanks!

Online Pemdas

  • Posts: 527
  • Location: Vancouver, WA
  • (づ ̄ ≥ ̄)づ ᶠᶫᵒᵃᵗᶦᶰᵍ ᶫᶦᵏᵉ ᵃ ᵇᵘᵗᵗᵉʳᶠᶫʸ
Re: [GB] SX60 Split 60% Keyboard
« Reply #78 on: Thu, 10 May 2018, 17:58:47 »
Hi All,

Picked up the boards from the post office yesterday and did QC and initlal packing for all of them.

Some problems I want to make you all aware of:

  • 5 of the weights for the left half of the board do not fit properly. I am getting replacements for these. Orders will be fulfilled in the order in which they were placed. I will notify you if you will have delayed shipment.
  • The manufacturer pulled kind of a bait and switch on me with regards to the overall quality of the boards.  The multiple prototypes I have received are flawless from the inside to the outside. The outside of the boards are flawless and look amazing, but there are visible tooling marks on the insides of the boards. Obviously these are not visible when the boards are assembled but I want to make you all aware and see your thoughts.
  • The PCBs are in assembly right now and should be in my hands next week. I will receive them and then flash the QMK firmware and verify all of the buttons are working as desired.
  • The cables are arriving this week

Thanks for being patient with the group buy I hope to start fulfilling orders in the coming weeks!

Do you have any pictures of the tooling marks on the inside? I'm not too worried as long as the outside looks good and that seems to be the case.

Also thanks for the constant updates! Always appreciated from a group buy organizer!
Current Daily Driver: Blue Mira SE w/ Tealios

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #79 on: Thu, 10 May 2018, 18:01:49 »
Hi All,

Picked up the boards from the post office yesterday and did QC and initlal packing for all of them.

Some problems I want to make you all aware of:

  • 5 of the weights for the left half of the board do not fit properly. I am getting replacements for these. Orders will be fulfilled in the order in which they were placed. I will notify you if you will have delayed shipment.
  • The manufacturer pulled kind of a bait and switch on me with regards to the overall quality of the boards.  The multiple prototypes I have received are flawless from the inside to the outside. The outside of the boards are flawless and look amazing, but there are visible tooling marks on the insides of the boards. Obviously these are not visible when the boards are assembled but I want to make you all aware and see your thoughts.
  • The PCBs are in assembly right now and should be in my hands next week. I will receive them and then flash the QMK firmware and verify all of the buttons are working as desired.
  • The cables are arriving this week

Thanks for being patient with the group buy I hope to start fulfilling orders in the coming weeks!

Do you have any pictures of the tooling marks on the inside? I'm not too worried as long as the outside looks good and that seems to be the case.

Also thanks for the constant updates! Always appreciated from a group buy organizer!

I have attached 2 images.  The part circled in blue is the tooling marks. The silver is my prototype for QXP that has no tooling marks.

Also here is your case as a reward for feedback :).

« Last Edit: Thu, 10 May 2018, 18:06:29 by Quantastrophus »

Online Pemdas

  • Posts: 527
  • Location: Vancouver, WA
  • (づ ̄ ≥ ̄)づ ᶠᶫᵒᵃᵗᶦᶰᵍ ᶫᶦᵏᵉ ᵃ ᵇᵘᵗᵗᵉʳᶠᶫʸ
Re: [GB] SX60 Split 60% Keyboard
« Reply #80 on: Thu, 10 May 2018, 18:08:19 »
I have attached 2 images.  The part circled in blue is the tooling marks. The silver is my prototype for QXP that has no tooling marks.

Oh that's way less than I thought, I can't speak for everyone else but I have no problems with marks like that on the inside :thumb:

And oh man the black looks great! Cant' wait to try it :thumb:
« Last Edit: Thu, 10 May 2018, 18:13:19 by Pemdas »
Current Daily Driver: Blue Mira SE w/ Tealios

Offline Tally810

  • Posts: 668
  • Location: Houston Texas
Re: [GB] SX60 Split 60% Keyboard
« Reply #81 on: Fri, 11 May 2018, 18:10:37 »
Hi All,

Picked up the boards from the post office yesterday and did QC and initlal packing for all of them.

Some problems I want to make you all aware of:

  • 5 of the weights for the left half of the board do not fit properly. I am getting replacements for these. Orders will be fulfilled in the order in which they were placed. I will notify you if you will have delayed shipment.
  • The manufacturer pulled kind of a bait and switch on me with regards to the overall quality of the boards.  The multiple prototypes I have received are flawless from the inside to the outside. The outside of the boards are flawless and look amazing, but there are visible tooling marks on the insides of the boards. Obviously these are not visible when the boards are assembled but I want to make you all aware and see your thoughts.
  • The PCBs are in assembly right now and should be in my hands next week. I will receive them and then flash the QMK firmware and verify all of the buttons are working as desired.
  • The cables are arriving this week

Thanks for being patient with the group buy I hope to start fulfilling orders in the coming weeks!
If mine is similar to the one shown I don't care about that on the inside

Sent from my Pixel 2 XL using Tapatalk


Offline FoC_Tow

  • * Destiny Supporter
  • Posts: 1107
  • Location: Germany
  • Brokehlicious
Re: [GB] SX60 Split 60% Keyboard
« Reply #82 on: Fri, 11 May 2018, 20:20:36 »
Thx for the upfront update Quantastrophus!
I donít mind the marks personally so try not to worry too much about it <3

Also no pressure but I shot you a pm about transferring a spot to me, so let me know how to proceed whenever you find some time

Offline Poesjuh

  • Posts: 161
  • Location: Netherlands - N-H
Re: [GB] SX60 Split 60% Keyboard
« Reply #83 on: Sat, 12 May 2018, 08:22:54 »
A very long shot but if anyone wants to give up his or her spot, lmk :)


Sent from my iPhone using Tapatalk

Offline WilySouser

  • Posts: 23
  • I would RTFM, but I can't find the FM
Re: [GB] SX60 Split 60% Keyboard
« Reply #84 on: Thu, 17 May 2018, 13:54:16 »
I don't mind the inside being marked up either.  It's aluminum so it won't really oxidize, not a problem.

Offline Poesjuh

  • Posts: 161
  • Location: Netherlands - N-H
Re: [GB] SX60 Split 60% Keyboard
« Reply #85 on: Sun, 20 May 2018, 19:13:34 »
Hmmm nobody giving up spots :( sad me :( should just have joined. Rip me :P


Sent from my iPhone using Tapatalk

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #86 on: Mon, 21 May 2018, 17:13:25 »
Hi All,

Got the PCBs in today and they are good to go. I'll upload a simple version of the firmware and test out the keys before shipping. I have the cables as well.

Going to start fulfilling orders. Super excited for you guys  :thumb:

Thanks

Offline Tally810

  • Posts: 668
  • Location: Houston Texas
Re: [GB] SX60 Split 60% Keyboard
« Reply #87 on: Mon, 21 May 2018, 17:14:49 »
Hi All,

Got the PCBs in today and they are good to go. I'll upload a simple version of the firmware and test out the keys before shipping. I have the cables as well.

Going to start fulfilling orders. Super excited for you guys  :thumb:

Thanks
Ayy hype

Sent from my Pixel 2 XL using Tapatalk


Online Pemdas

  • Posts: 527
  • Location: Vancouver, WA
  • (づ ̄ ≥ ̄)づ ᶠᶫᵒᵃᵗᶦᶰᵍ ᶫᶦᵏᵉ ᵃ ᵇᵘᵗᵗᵉʳᶠᶫʸ
Re: [GB] SX60 Split 60% Keyboard
« Reply #88 on: Mon, 21 May 2018, 18:14:51 »
Hi All,

Got the PCBs in today and they are good to go. I'll upload a simple version of the firmware and test out the keys before shipping. I have the cables as well.

Going to start fulfilling orders. Super excited for you guys  :thumb:

Thanks

Quite excited for this board! Can't wait to try out the split board style! Very quick and communicative GB too, thanks Quantastrophus!
Current Daily Driver: Blue Mira SE w/ Tealios

Online Pemdas

  • Posts: 527
  • Location: Vancouver, WA
  • (づ ̄ ≥ ̄)づ ᶠᶫᵒᵃᵗᶦᶰᵍ ᶫᶦᵏᵉ ᵃ ᵇᵘᵗᵗᵉʳᶠᶫʸ
Re: [GB] SX60 Split 60% Keyboard
« Reply #89 on: Fri, 25 May 2018, 03:59:40 »

SX60 Zilents by thosepeoples, on Flickr

Wooo! Got the board in the mail today and built it up with some 78g Zilents! Thanks again to Quantastrophus for the awesome board!  Straight wrists feel great :thumb:

One question how do I go about programming the board?
Current Daily Driver: Blue Mira SE w/ Tealios

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #90 on: Fri, 25 May 2018, 08:08:48 »
Show Image

SX60 Zilents by thosepeoples, on Flickr

Wooo! Got the board in the mail today and built it up with some 78g Zilents! Thanks again to Quantastrophus for the awesome board!  Straight wrists feel great :thumb:

One question how do I go about programming the board?

I'll upload my branch for qmk_firmware to GitHub today.

Offline Tally810

  • Posts: 668
  • Location: Houston Texas
Re: [GB] SX60 Split 60% Keyboard
« Reply #91 on: Fri, 25 May 2018, 08:19:40 »
Nice looking build dude. Mine shows up today
Show Image

SX60 Zilents by thosepeoples, on Flickr

Wooo! Got the board in the mail today and built it up with some 78g Zilents! Thanks again to Quantastrophus for the awesome board!  Straight wrists feel great :thumb:

One question how do I go about programming the board?

Sent from my Pixel 2 XL using Tapatalk


Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #92 on: Fri, 25 May 2018, 08:59:44 »
Uploaded my branch to my GitHub. Still need to write a README and create an info.json so it will work with the online tool  :thumb:. Those more experienced with QMK can clone the branch here:

https://github.com/amnobis/qmk_firmware-1/tree/sx60

Offline Tally810

  • Posts: 668
  • Location: Houston Texas
Re: [GB] SX60 Split 60% Keyboard
« Reply #93 on: Fri, 25 May 2018, 10:17:41 »
Got my board and it is stunning.  https://imgur.com/a/FdeZm0h

Sent from my Pixel 2 XL using Tapatalk


Offline midnight2903

  • Posts: 323
  • Location: Singapore
Re: [GB] SX60 Split 60% Keyboard
« Reply #94 on: Sat, 26 May 2018, 00:35:56 »
Got my board and it is stunning.  https://imgur.com/a/FdeZm0h

Sent from my Pixel 2 XL using Tapatalk

I immediately regret not getting that spot...

Offline FoC_Tow

  • * Destiny Supporter
  • Posts: 1107
  • Location: Germany
  • Brokehlicious
Re: [GB] SX60 Split 60% Keyboard
« Reply #95 on: Sat, 26 May 2018, 03:22:30 »
Love seeing the first builds pics pop up <3

Are we getting separate invoices for shipping btw?
If so I havenít gotten one yet ;___;

Offline Athlio

  • Posts: 8
Re: [GB] SX60 Split 60% Keyboard
« Reply #96 on: Sat, 26 May 2018, 17:31:25 »
Also very interested in a black or grey kit if anyone decides to sell  :thumb:

Offline Ammomruoy

  • Posts: 8
Re: [GB] SX60 Split 60% Keyboard
« Reply #97 on: Sun, 27 May 2018, 05:47:53 »
Damn, I missed out :(
Anyone willing to sell their's? Got lots of love and PayPal to give :)

Offline mgsickler

  • Posts: 144
Re: [GB] SX60 Split 60% Keyboard
« Reply #98 on: Sun, 27 May 2018, 06:50:26 »
Here is my build.

https://imgur.com/a/j3CQjFE

The board is really great. I am very happy with it all!

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #99 on: Sun, 27 May 2018, 10:50:57 »
Love seeing the first builds pics pop up <3

Are we getting separate invoices for shipping btw?
If so I havenít gotten one yet ;___;

Some orders are delayed waiting for replacement parts.

Offline FoC_Tow

  • * Destiny Supporter
  • Posts: 1107
  • Location: Germany
  • Brokehlicious
Re: [GB] SX60 Split 60% Keyboard
« Reply #100 on: Mon, 28 May 2018, 07:21:53 »
Love seeing the first builds pics pop up <3

Are we getting separate invoices for shipping btw?
If so I havenít gotten one yet ;___;

Some orders are delayed waiting for replacement parts.

Ah sorry, probably missed the post on that.
All good then, thx for letting me know =)

Offline Poesjuh

  • Posts: 161
  • Location: Netherlands - N-H
Re: [GB] SX60 Split 60% Keyboard
« Reply #101 on: Tue, 29 May 2018, 11:48:38 »
Sick looking builds!!

So whoís selling me spot?


Sent from my iPhone using Tapatalk

Offline hariseldon

  • Posts: 5
Re: [GB] SX60 Split 60% Keyboard
« Reply #102 on: Wed, 30 May 2018, 11:54:21 »
Is there a PCB design up on OSHpark so we can order ourselves these PCBs?

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #103 on: Wed, 30 May 2018, 12:14:46 »
Is there a PCB design up on OSHpark so we can order ourselves these PCBs?

No. I do not plan on open sourcing the PCB design.

Offline Darknight00z

  • Posts: 185
  • Location: UK
Re: [GB] SX60 Split 60% Keyboard
« Reply #104 on: Fri, 01 June 2018, 18:40:05 »
Whats the new timeframe for the cases that need to be redone?

Offline Doonagoowin

  • Posts: 4
Re: [GB] SX60 Split 60% Keyboard
« Reply #105 on: Sun, 03 June 2018, 12:57:20 »
Signed up for Geekhack for this board too.
If anybody wants to sell their spot, let me know!

I can't get used to ortho, but I need a split board.

Thanks :)

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #106 on: Sun, 03 June 2018, 13:11:22 »
Whats the new timeframe for the cases that need to be redone?

I'll get in contact with the manufacturer later today and will update everyone.

Online Pemdas

  • Posts: 527
  • Location: Vancouver, WA
  • (づ ̄ ≥ ̄)づ ᶠᶫᵒᵃᵗᶦᶰᵍ ᶫᶦᵏᵉ ᵃ ᵇᵘᵗᵗᵉʳᶠᶫʸ
Re: [GB] SX60 Split 60% Keyboard
« Reply #107 on: Sun, 03 June 2018, 15:43:39 »
Uploaded my branch to my GitHub. Still need to write a README and create an info.json so it will work with the online tool  :thumb:. Those more experienced with QMK can clone the branch here:

https://github.com/amnobis/qmk_firmware-1/tree/sx60

Any progress on the online tool compatibility? I tried my hand at the QMK compiling but I have no idea what I'm doing  :p
Current Daily Driver: Blue Mira SE w/ Tealios

Offline Tally810

  • Posts: 668
  • Location: Houston Texas
Re: [GB] SX60 Split 60% Keyboard
« Reply #108 on: Sun, 03 June 2018, 17:57:46 »
Uploaded my branch to my GitHub. Still need to write a README and create an info.json so it will work with the online tool  :thumb:. Those more experienced with QMK can clone the branch here:

https://github.com/amnobis/qmk_firmware-1/tree/sx60

Any progress on the online tool compatibility? I tried my hand at the QMK compiling but I have no idea what I'm doing 
Same dude I'ma need some help to program this thing lol

Sent from my Pixel 2 XL using Tapatalk


Online Pemdas

  • Posts: 527
  • Location: Vancouver, WA
  • (づ ̄ ≥ ̄)づ ᶠᶫᵒᵃᵗᶦᶰᵍ ᶫᶦᵏᵉ ᵃ ᵇᵘᵗᵗᵉʳᶠᶫʸ
Re: [GB] SX60 Split 60% Keyboard
« Reply #109 on: Sun, 03 June 2018, 23:20:41 »
Same dude I'ma need some help to program this thing lol

Sent from my Pixel 2 XL using Tapatalk

I've watched a couple tutorials vids and read some online guides but I feel like there's a couple pieces missing for me to put it all together  :p
Current Daily Driver: Blue Mira SE w/ Tealios

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #110 on: Mon, 04 June 2018, 00:26:55 »
Same dude I'ma need some help to program this thing lol

Sent from my Pixel 2 XL using Tapatalk

I've watched a couple tutorials vids and read some online guides but I feel like there's a couple pieces missing for me to put it all together  :p

Uploaded my branch to my GitHub. Still need to write a README and create an info.json so it will work with the online tool  :thumb:. Those more experienced with QMK can clone the branch here:

https://github.com/amnobis/qmk_firmware-1/tree/sx60

Any progress on the online tool compatibility? I tried my hand at the QMK compiling but I have no idea what I'm doing 
Same dude I'ma need some help to program this thing lol

Sent from my Pixel 2 XL using Tapatalk




Maybe I should do a stream on twitch or something showing how to program the board?  :cool:

Online Pemdas

  • Posts: 527
  • Location: Vancouver, WA
  • (づ ̄ ≥ ̄)づ ᶠᶫᵒᵃᵗᶦᶰᵍ ᶫᶦᵏᵉ ᵃ ᵇᵘᵗᵗᵉʳᶠᶫʸ
Re: [GB] SX60 Split 60% Keyboard
« Reply #111 on: Mon, 04 June 2018, 02:43:15 »
Maybe I should do a stream on twitch or something showing how to program the board?  :cool:

That would be very helpful :thumb:
Current Daily Driver: Blue Mira SE w/ Tealios

Offline amnesia0287

  • Formerly Amnesia
  • Posts: 1094
Re: [GB] SX60 Split 60% Keyboard
« Reply #112 on: Wed, 06 June 2018, 13:51:56 »
Maybe I should do a stream on twitch or something showing how to program the board?  :cool:

That would be very helpful :thumb:

I was bored so I did a thing: https://config.qmk.fm/#/sx60/LAYOUT_ansi_split_bs



I have no clue if it works or not since I donít have a sx60, but Iím pretty sure I got the map right based on quantrikís repo.

If any switches donít work or are flipped lemme know :P

Online Pemdas

  • Posts: 527
  • Location: Vancouver, WA
  • (づ ̄ ≥ ̄)づ ᶠᶫᵒᵃᵗᶦᶰᵍ ᶫᶦᵏᵉ ᵃ ᵇᵘᵗᵗᵉʳᶠᶫʸ
Re: [GB] SX60 Split 60% Keyboard
« Reply #113 on: Wed, 06 June 2018, 15:01:29 »
I was bored so I did a thing: https://config.qmk.fm/#/sx60/LAYOUT_ansi_split_bs

Show Image


I have no clue if it works or not since I don’t have a sx60, but I’m pretty sure I got the map right based on quantrik’s repo.

If any switches don’t work or are flipped lemme know :P

:eek: :eek: You're awesome! I've been googling QMK for like 2 weeks now trying to figure out how to make a json for the configurator.

I'm away from my board at the moment but I'll give this a try when I get home and report back :thumb:

**EDIT** Haven't got home yet still, but noticed that the right shift is not split. How do you go about making a custom layout for the configurator?

**EDIT2** I'm dumb found the drop down menu ha
« Last Edit: Wed, 06 June 2018, 17:37:02 by Pemdas »
Current Daily Driver: Blue Mira SE w/ Tealios

Offline amnesia0287

  • Formerly Amnesia
  • Posts: 1094
Re: [GB] SX60 Split 60% Keyboard
« Reply #114 on: Wed, 06 June 2018, 19:47:09 »
I was bored so I did a thing: https://config.qmk.fm/#/sx60/LAYOUT_ansi_split_bs

Show Image


I have no clue if it works or not since I donít have a sx60, but Iím pretty sure I got the map right based on quantrikís repo.

If any switches donít work or are flipped lemme know :P

:eek: :eek: You're awesome! I've been googling QMK for like 2 weeks now trying to figure out how to make a json for the configurator.

I'm away from my board at the moment but I'll give this a try when I get home and report back :thumb:

**EDIT** Haven't got home yet still, but noticed that the right shift is not split. How do you go about making a custom layout for the configurator?

**EDIT2** I'm dumb found the drop down menu ha

So did it work? Lol

I had to figure out the layout manually, itís the info.json in the repo itself.

I did all the layouts I could think of and a default one that I think has all the keys, but I could have missed something. 

Online Pemdas

  • Posts: 527
  • Location: Vancouver, WA
  • (づ ̄ ≥ ̄)づ ᶠᶫᵒᵃᵗᶦᶰᵍ ᶫᶦᵏᵉ ᵃ ᵇᵘᵗᵗᵉʳᶠᶫʸ
Re: [GB] SX60 Split 60% Keyboard
« Reply #115 on: Wed, 06 June 2018, 21:09:06 »
So did it work? Lol

I had to figure out the layout manually, itís the info.json in the repo itself.

I did all the layouts I could think of and a default one that I think has all the keys, but I could have missed something.

Just got home and it got flashed successfully! You're a god send, thanks so much :thumb:

Can finally put this board to some good use!



Just pinging ya to make sure you saw the link amnesia0287 posted :thumb:
Current Daily Driver: Blue Mira SE w/ Tealios

Offline FoC_Tow

  • * Destiny Supporter
  • Posts: 1107
  • Location: Germany
  • Brokehlicious
Re: [GB] SX60 Split 60% Keyboard
« Reply #116 on: Mon, 18 June 2018, 18:29:50 »
Any updates on replacement part schedule?

Offline amnesia0287

  • Formerly Amnesia
  • Posts: 1094
Re: [GB] SX60 Split 60% Keyboard
« Reply #117 on: Mon, 18 June 2018, 19:43:30 »
Any updates on replacement part schedule?

Quantrik just moved and started a new job the last week or so so heís been mostly busy and unavailable. Your best bet is probably to try and ping him on discord. He is starting to be more active again now that he has internet service again at least lol.

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #118 on: Mon, 18 June 2018, 19:56:20 »
Hi all,

Got the rest of the replacement parts today in the mail. Need to test fitment still but I think we should be all set! You'll get a shipment notification via PayPal if your board is on the way.

Thanks

Offline WilySouser

  • Posts: 23
  • I would RTFM, but I can't find the FM
Re: [GB] SX60 Split 60% Keyboard
« Reply #119 on: Tue, 19 June 2018, 17:21:56 »
Got the rest of the replacement parts today in the mail. Need to test fitment still but I think we should be all set! You'll get a shipment notification via PayPal if your board is on the way.

Does this include the plates for the special arrow cluster?

Online Lotsati

  • Posts: 16
Re: [GB] SX60 Split 60% Keyboard
« Reply #120 on: Tue, 19 June 2018, 22:40:07 »
Also interested in extras/round 2/buying off someone :P Experienced the glory of split boards a bit too late to join this :(

Offline mgsickler

  • Posts: 144
Re: [GB] SX60 Split 60% Keyboard
« Reply #121 on: Wed, 20 June 2018, 14:24:11 »
I was bored so I did a thing: https://config.qmk.fm/#/sx60/LAYOUT_ansi_split_bs

Show Image


I have no clue if it works or not since I donít have a sx60, but Iím pretty sure I got the map right based on quantrikís repo.

If any switches donít work or are flipped lemme know :P

So I just used this to flash my SX60. Everything worked except the backspace key. This was for the LAYOUT_ansi_split_rshift

The normal backspace spot is where I was putting that. Every other key worked exactly as I thought it would.

Any tips?

Online pixelpusher

  • Formerly known as reececonrad
  • Posts: 1929
  • Location: Tennessee - USA
Re: [GB] SX60 Split 60% Keyboard
« Reply #122 on: Wed, 20 June 2018, 14:36:08 »
Here is my build.

https://imgur.com/a/j3CQjFE

The board is really great. I am very happy with it all!

Now come on...  Mr. NovelKeys himself is not going to tell us what switches he's using??
« Last Edit: Wed, 20 June 2018, 14:37:56 by pixelpusher »
:)

Offline mgsickler

  • Posts: 144
Re: [GB] SX60 Split 60% Keyboard
« Reply #123 on: Wed, 20 June 2018, 15:40:21 »


Now come on...  Mr. NovelKeys himself is not going to tell us what switches he's using??

Ha! Iím using stock BOX Royals in mine. :)

Offline fireworm

  • Posts: 15
Re: [GB] SX60 Split 60% Keyboard
« Reply #124 on: Thu, 21 June 2018, 06:18:02 »
Interested, if anyone wants to sell... (Unlikely I suspect)

Offline FoC_Tow

  • * Destiny Supporter
  • Posts: 1107
  • Location: Germany
  • Brokehlicious
Re: [GB] SX60 Split 60% Keyboard
« Reply #125 on: Thu, 21 June 2018, 15:31:57 »
Hi all,

Got the rest of the replacement parts today in the mail. Need to test fitment still but I think we should be all set! You'll get a shipment notification via PayPal if your board is on the way.

Thanks

Thank for the Update!

Sorry to bother you with this, but just to make sure, please donít forget the address change I requested a while back. =)

Offline Darknight00z

  • Posts: 185
  • Location: UK
Re: [GB] SX60 Split 60% Keyboard
« Reply #126 on: Wed, 27 June 2018, 11:34:41 »
Has everyone received theirs?

Offline FoC_Tow

  • * Destiny Supporter
  • Posts: 1107
  • Location: Germany
  • Brokehlicious
[GB] SX60 Split 60% Keyboard
« Reply #127 on: Wed, 27 June 2018, 12:41:31 »
Has everyone received theirs?

Nope.

Still waiting on confirmation about the address change, so Iím leaning towards hoping it wasnít shipped yet tbh

Offline Darknight00z

  • Posts: 185
  • Location: UK
Re: [GB] SX60 Split 60% Keyboard
« Reply #128 on: Fri, 29 June 2018, 16:36:52 »
me too. Still waiting on paypal shipping notification.
« Last Edit: Fri, 29 June 2018, 18:53:26 by Darknight00z »

Online aya3154

  • Posts: 66
  • Location: Singapore
  • McWan
Re: [GB] SX60 Split 60% Keyboard
« Reply #129 on: Fri, 29 June 2018, 18:51:54 »
I'd be down to buy this board from anyone who happens to change their mind , pls pm me

Offline FoC_Tow

  • * Destiny Supporter
  • Posts: 1107
  • Location: Germany
  • Brokehlicious
Re: [GB] SX60 Split 60% Keyboard
« Reply #130 on: Fri, 06 July 2018, 09:15:12 »
Any updates Quantas? =)

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #131 on: Sun, 08 July 2018, 22:48:11 »
Hi All,

Update: QC'ing the PCBs and flashing base firmware for the rest of the orders and packing them up. Everything will be shipped out by Tuesday morning. After everyone has received their boards please contact me ASAP for replacement parts and we can work something out. Only one participant has expressed any need for a replacement piece so far so I don't expect it to be a big order. I just prefer that all the replacements are ordered together.

I'll give everyone until July 20th to contact me for any replacements they may need then the order will go in.

Thanks for being patient and I hope you all enjoy your boards  :thumb:

Offline FoC_Tow

  • * Destiny Supporter
  • Posts: 1107
  • Location: Germany
  • Brokehlicious
[GB] SX60 Split 60% Keyboard
« Reply #132 on: Mon, 09 July 2018, 02:27:59 »
Edit: nvm thx quantas
« Last Edit: Mon, 09 July 2018, 02:30:40 by FoC_Tow »

Offline Darknight00z

  • Posts: 185
  • Location: UK
Re: [GB] SX60 Split 60% Keyboard
« Reply #133 on: Thu, 12 July 2018, 15:33:30 »
So have they been shipped out?

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #134 on: Fri, 13 July 2018, 23:35:46 »
Check your PayPal for tracking information.

Offline FoC_Tow

  • * Destiny Supporter
  • Posts: 1107
  • Location: Germany
  • Brokehlicious
Re: [GB] SX60 Split 60% Keyboard
« Reply #135 on: Sat, 14 July 2018, 06:08:28 »
Hi All,

Update: QC'ing the PCBs and flashing base firmware for the rest of the orders and packing them up. Everything will be shipped out by Tuesday morning. After everyone has received their boards please contact me ASAP for replacement parts and we can work something out. Only one participant has expressed any need for a replacement piece so far so I don't expect it to be a big order. I just prefer that all the replacements are ordered together.

I'll give everyone until July 20th to contact me for any replacements they may need then the order will go in.

Thanks for being patient and I hope you all enjoy your boards  :thumb:

Have you consider delays of Parts beeing stuck in customs quantas?

I honestly doubt I will even receive my boards before July 20th, but then again I also doubt Iím going to need replacements.

Anyway just wanted to let you know July 20th seams unreasonable to me since I would have to request replacements before receiving my actual order

Online Quantastrophus

  • Thread Starter
  • Posts: 116
Re: [GB] SX60 Split 60% Keyboard
« Reply #136 on: Sat, 14 July 2018, 10:05:42 »
Hi All,

Update: QC'ing the PCBs and flashing base firmware for the rest of the orders and packing them up. Everything will be shipped out by Tuesday morning. After everyone has received their boards please contact me ASAP for replacement parts and we can work something out. Only one participant has expressed any need for a replacement piece so far so I don't expect it to be a big order. I just prefer that all the replacements are ordered together.

I'll give everyone until July 20th to contact me for any replacements they may need then the order will go in.

Thanks for being patient and I hope you all enjoy your boards  :thumb:

Have you consider delays of Parts beeing stuck in customs quantas?

I honestly doubt I will even receive my boards before July 20th, but then again I also doubt Iím going to need replacements.

Anyway just wanted to let you know July 20th seams unreasonable to me since I would have to request replacements before receiving my actual order

Sure, I agree.

I'll wait a week after all the boards have been confirmed to be received. Does that sound more reasonable?

Thanks

Offline FoC_Tow

  • * Destiny Supporter
  • Posts: 1107
  • Location: Germany
  • Brokehlicious
Re: [GB] SX60 Split 60% Keyboard
« Reply #137 on: Sat, 14 July 2018, 10:16:25 »
Thx Quantas! Much appreciated <3

Online PandaRooooong

  • Posts: 13
Re: [GB] SX60 Split 60% Keyboard
« Reply #138 on: Wed, 18 July 2018, 10:18:16 »
Received keyboard today ;D
I dont have too much time to take a look but it seems looks good :thumb: