Author Topic: [FS] Dactyl-Manuforms, Ergodox, Krytox (Read 30553 times)

Loligagger · « **on:** Fri, 16 March 2018, 15:49:25 »

All prices are in USD, not including shipping.

Keep in mind shipment is from Canada. Feel free to send me offers.

For sale:

-Dactyl-Manuform, 5x7 layout with 78g V2 zilents lubed with krytox 103/205. Case is printed with grey PETG. Switches are hand-wired directly to the pins and hot-glued in place. Case has been modified in a few places so keycaps don't rub against it (on both thumb clusters and around the -/_ key on the right half). Bottom plate has large rubber pads for a bit of extra sound absorption. Can include PBT DSA grey/black keycap set for $25 extra.
Asking $250

-Dactyl-Manuform, 5x7 layout with holy pandas lubed with 3203. Case is printed with dark grey PLA. The case design has a few modifications compared to the other two; different thumb cluster allowing clearance for all keys, different pro-micro/trrs holder as well. The switches are wired up using Amoeba PCBs (pic of the board before final soldering). Can include PBT DSA grey/black keycap set for $25 extra.
Asking $300

-Custom aluminum ergodox (SA Retro not included). PCB is from falbatech. Switches are box navy with box royal springs. Going by haata's measurements the royal springs seem to be slightly heavier than jade springs. None of the switches have trouble returning on the upstroke either. Tenting angle is about 20 degrees. Weighs approx 7lbs total. I've shaved down the nubs on the x-axis of the switches, so none of them should be too tight. At worst you may need to use the plastic sheet trick in case some switches are too loose. TRRS/USB cables not included
Asking $270

-Krytox GPL 103/205 mixture. The 103 came from Jocelyn's group buy a while ago and the 205, if I'm not mistaken, is gr2. It's a 1:1 mixture so it started as 1oz total. I've since lubed no more than 200 switches sparingly, so there should still be enough left for several hundred switches.
Asking $15

Timestamp:

More

SOLD:

More

-Costar stabilizers, 5x 2u stabs and 1x 6.25u spacebar stab
-aluminum MX keychain (MX black)
-awesomeface keycap
-80x loose MX clear stems & springs
-80x Zealios 78g, from R4 if I remember correctly.
-76x 67g Zealios (from R4 if I'm not mistaken). These were desoldered from my ergodox so I could put box navies into it. All the pins are in good condition, nothing bent or broken.
-110x MOD-M tactile switches
-80x aristotles in cherry MX housings with switch stickers installed. They're using the stock aristotle spring, so I'm not certain what the weight is. It's similar to MX blue/brown.
-20x MX clears with switch stickers installed
-110x MOD-H tactile switches
-Dactyl-Manuform
-120x Zealencios
-74x zeal v2 67g with novelkeys cream stems in them
-5x7 dactyl-manuform with retooled box navies

Loligagger · « **Reply #1 on:** Sat, 17 March 2018, 13:33:01 »

Stabs, stems, etc. now sold.

Loligagger · « **Reply #2 on:** Tue, 20 March 2018, 15:52:11 »

Price drop on the aristotles.

Loligagger · « **Reply #3 on:** Sun, 25 March 2018, 15:04:28 »

Added more switches for sale.

Loligagger · « **Reply #4 on:** Mon, 02 April 2018, 21:17:43 »

Loligagger · « **Reply #5 on:** Fri, 06 April 2018, 00:27:23 »

78g zealios sold.

Loligagger · « **Reply #6 on:** Fri, 13 April 2018, 11:21:11 »

Price drop on the aristotles & mx clears.

Loligagger · « **Reply #7 on:** Wed, 18 April 2018, 22:46:24 »

Added some items. Not certain if I'll sell the ergodox, but I'll take offers.

Loligagger · « **Reply #8 on:** Mon, 23 April 2018, 13:39:17 »

Loligagger · « **Reply #9 on:** Tue, 24 April 2018, 19:52:02 »

Added 67g zealios taken from my ergodox. Since I have the box navies in it now I'm going to keep it, but if anyone wants me to build one like it, just send me a message.

Loligagger · « **Reply #10 on:** Tue, 01 May 2018, 14:13:28 »

Loligagger · « **Reply #11 on:** Thu, 03 May 2018, 04:05:28 »

67g zealios sold.

Loligagger · « **Reply #12 on:** Wed, 09 May 2018, 14:00:12 »

MOD-M switches sold.

Loligagger · « **Reply #13 on:** Sun, 13 May 2018, 13:36:12 »

Loligagger · « **Reply #14 on:** Wed, 16 May 2018, 16:33:08 »

Loligagger · « **Reply #15 on:** Tue, 22 May 2018, 22:04:54 »

Loligagger · « **Reply #16 on:** Wed, 30 May 2018, 12:29:37 »

Loligagger · « **Reply #17 on:** Mon, 04 June 2018, 13:51:54 »

Loligagger · « **Reply #18 on:** Mon, 11 June 2018, 17:20:07 »

Loligagger · « **Reply #19 on:** Fri, 15 June 2018, 19:15:59 »

Put the ergodox back up for sale.

Loligagger · « **Reply #20 on:** Mon, 25 June 2018, 14:08:12 »

JustCallMeCrash · « **Reply #21 on:** Tue, 26 June 2018, 08:47:46 »

What PCB is on the ErgoDox? (Original from the MassDrop GB, one from MechKeys, an ErgoDone, ErgoDoxEZ, I'm sure there are others I haven't found yet)?

Loligagger · « **Reply #22 on:** Tue, 26 June 2018, 13:40:50 »

The PCB is from falbatech. If I'm not mistaken they're the same as the standard ergodox PCB that massdrop offered.

Loligagger · « **Reply #23 on:** Thu, 05 July 2018, 17:44:51 »

Loligagger · « **Reply #24 on:** Sun, 15 July 2018, 15:55:51 »

Loligagger · « **Reply #25 on:** Wed, 25 July 2018, 13:53:44 »

Loligagger · « **Reply #26 on:** Fri, 03 August 2018, 18:48:32 »

Loligagger · « **Reply #27 on:** Wed, 08 August 2018, 18:06:29 »

Loligagger · « **Reply #28 on:** Sun, 19 August 2018, 13:04:07 »

Loligagger · « **Reply #29 on:** Wed, 29 August 2018, 12:45:11 »

Loligagger · « **Reply #30 on:** Fri, 07 September 2018, 12:47:08 »

Added an asking price to the ergodox.

Loligagger · « **Reply #31 on:** Thu, 20 September 2018, 13:09:15 »

Loligagger · « **Reply #32 on:** Mon, 24 September 2018, 21:52:35 »

Aristotles & MX clears sold.

Loligagger · « **Reply #33 on:** Fri, 05 October 2018, 15:58:10 »

Loligagger · « **Reply #34 on:** Tue, 16 October 2018, 15:06:41 »

zutroy · « **Reply #35 on:** Wed, 17 October 2018, 07:06:07 »

PMing

Loligagger · « **Reply #36 on:** Wed, 17 October 2018, 19:40:39 »

Tactile MOD-Hs sold.

Loligagger · « **Reply #37 on:** Thu, 01 November 2018, 15:52:53 »

Loligagger · « **Reply #38 on:** Wed, 07 November 2018, 15:35:41 »

Added dactyl-manuform for sale.

Loligagger · « **Reply #39 on:** Sat, 17 November 2018, 15:46:47 »

d9000 · « **Reply #40 on:** Tue, 20 November 2018, 07:28:04 »

I'm curious, how/where did you get the Ergodox case made?

Loligagger · « **Reply #41 on:** Tue, 20 November 2018, 13:35:08 »

Most of the plates were from AKmalamute's group buy years ago. The switchplate & some spacers were laser cut from a local shop, the tenting feet were cut locally as well.

Loligagger · « **Reply #42 on:** Sat, 01 December 2018, 19:18:54 »

Loligagger · « **Reply #43 on:** Wed, 12 December 2018, 13:42:57 »

Loligagger · « **Reply #44 on:** Thu, 20 December 2018, 19:03:51 »

Dactyl-manuform sold.

Loligagger · « **Reply #45 on:** Tue, 01 January 2019, 12:59:45 »

Loligagger · « **Reply #46 on:** Wed, 09 January 2019, 17:04:03 »

Loligagger · « **Reply #47 on:** Tue, 15 January 2019, 15:21:09 »

Loligagger · « **Reply #48 on:** Thu, 24 January 2019, 16:04:26 »

Loligagger · « **Reply #49 on:** Wed, 30 January 2019, 13:40:22 »

News:

Author Topic: [FS] Dactyl-Manuforms, Ergodox, Krytox (Read 30553 times)