Author Topic: [FS] Dactyl-Manuforms, Ergodox, Krytox  (Read 31042 times)

0 Members and 2 Guests are viewing this topic.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
[FS] Dactyl-Manuforms, Ergodox, Krytox
« on: Fri, 16 March 2018, 15:49:25 »
All prices are in USD, not including shipping.

Keep in mind shipment is from Canada. Feel free to send me offers.

For sale:

-Dactyl-Manuform, 5x7 layout with NK creams lubed with krytox 205g0. Case is printed with blue-grey PLA. Some more build pics here. Switches are wired up using amoeba PCBs. The pro-micro & trrs jack use a separate holder I designed. Does mean that right angle trrs cables probably won't fit since the jack is recessed a bit. Bottom plates have a layer of sorbothane on it to absorb sound and give the board a bit of extra weight. MT3 Godspeed keycaps not included.
Asking $290

236438-0


-Dactyl-Manuform, 5x7 layout with 78g V2 zilents lubed with krytox 103/205. Case is printed with grey PETG. Switches are hand-wired directly to the pins and hot-glued in place. Case has been modified in a few places so keycaps don't rub against it (on both thumb clusters and around the -/_ key on the right half). Bottom plate has large rubber pads for a bit of extra sound absorption.
Asking $250

232662-1


-Custom aluminum ergodox (SA Retro not included). PCB is from falbatech. Switches are box navy with box royal springs. Going by haata's measurements the royal springs seem to be slightly heavier than jade springs. None of the switches have trouble returning on the upstroke either. Tenting angle is about 20 degrees. Weighs approx 7lbs total. I've shaved down the nubs on the x-axis of the switches, so none of them should be too tight. At worst you may need to use the plastic sheet trick in case some switches are too loose. TRRS/USB cables not included
Asking $270

194546-2


-Krytox GPL 103/205 mixture. The 103 came from Jocelyn's group buy a while ago and the 205, if I'm not mistaken, is gr2. It's a 1:1 mixture so it started as 1oz total. I've since lubed no more than 200 switches sparingly, so there should still be enough left for several hundred switches.
Asking $12

222593-3


Timestamp:
More
218875-4
222595-5
232668-6
236440-7

SOLD:
More
-Costar stabilizers, 5x 2u stabs and 1x 6.25u spacebar stab
-aluminum MX keychain (MX black)
-awesomeface keycap
-80x loose MX clear stems & springs
-80x Zealios 78g, from R4 if I remember correctly.
-76x 67g Zealios (from R4 if I'm not mistaken). These were desoldered from my ergodox so I could put box navies into it. All the pins are in good condition, nothing bent or broken.
-110x MOD-M tactile switches
-80x aristotles in cherry MX housings with switch stickers installed. They're using the stock aristotle spring, so I'm not certain what the weight is. It's similar to MX blue/brown.
-20x MX clears with switch stickers installed
-110x MOD-H tactile switches
-5x7 dactyl-manuform with box royals (box navy springs)
-120x Zealencios
-74x zeal v2 67g with novelkeys cream stems in them
-5x7 dactyl-manuform with retooled box navies
-5x7 dactyl-manuform with holy pandas
« Last Edit: Mon, 24 February 2020, 17:45:50 by Loligagger »

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Aristotles, MX clears
« Reply #1 on: Sat, 17 March 2018, 13:33:01 »
Stabs, stems, etc. now sold.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Aristotles, MX clears
« Reply #2 on: Tue, 20 March 2018, 15:52:11 »
Price drop on the aristotles.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] 78g Zealios, MOD-M, MOD-H, Aristotles, MX clears
« Reply #3 on: Sun, 25 March 2018, 15:04:28 »
Added more switches for sale.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] 78g Zealios, MOD-M, MOD-H, Aristotles, MX clears
« Reply #4 on: Mon, 02 April 2018, 21:17:43 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] MOD-M, MOD-H, Aristotles, MX clears
« Reply #5 on: Fri, 06 April 2018, 00:27:23 »
78g zealios sold.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] tactile MOD-M/MOD-H, Aristotles, MX clears
« Reply #6 on: Fri, 13 April 2018, 11:21:11 »
Price drop on the aristotles & mx clears.
« Last Edit: Fri, 13 April 2018, 16:13:29 by Loligagger »

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Added some items. Not certain if I'll sell the ergodox, but I'll take offers.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Added 67g zealios taken from my ergodox. Since I have the box navies in it now I'm going to keep it, but if anyone wants me to build one like it, just send me a message.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
67g zealios sold.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Zealencios, tactile MOD-H, Aristotles, MX clears
« Reply #12 on: Wed, 09 May 2018, 14:00:12 »
MOD-M switches sold.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Zealencios, tactile MOD-H, Aristotles, MX clears
« Reply #13 on: Sun, 13 May 2018, 13:36:12 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Zealencios, tactile MOD-H, Aristotles, MX clears
« Reply #14 on: Wed, 16 May 2018, 16:33:08 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Zealencios, tactile MOD-H, Aristotles, MX clears
« Reply #15 on: Tue, 22 May 2018, 22:04:54 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Zealencios, tactile MOD-H, Aristotles, MX clears
« Reply #16 on: Wed, 30 May 2018, 12:29:37 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Zealencios, tactile MOD-H, Aristotles, MX clears
« Reply #17 on: Mon, 04 June 2018, 13:51:54 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Zealencios, tactile MOD-H, Aristotles, MX clears
« Reply #18 on: Mon, 11 June 2018, 17:20:07 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios, tactile MOD-H, Aristotles, MX clears
« Reply #19 on: Fri, 15 June 2018, 19:15:59 »
Put the ergodox back up for sale.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios, tactile MOD-H, Aristotles, MX clears
« Reply #20 on: Mon, 25 June 2018, 14:08:12 »
bump

Offline JustCallMeCrash

  • Trade Count: (0)
  • Posts: 218
  • Location: NC, USA
  • ErgoDox Lover
Re: [FS] aluminum Ergodox, Zealencios, tactile MOD-H, Aristotles, MX clears
« Reply #21 on: Tue, 26 June 2018, 08:47:46 »
What PCB is on the ErgoDox?  (Original from the MassDrop GB, one from MechKeys, an ErgoDone, ErgoDoxEZ, I'm sure there are others I haven't found yet)? 
ErgoDoxen 6 total: 1x Cherry MX Browns, Cherry MX Clears, 35g Ghetto Reds, 80g Gateron Yellows, NovelKeys Pale Blues, NovelKeys Box Navy.
Preonic 2 total: OG Gateron Yellows (GMK silencer clips), TBD (unassembled v2).
XD-75 (mixed Gateron Yellows, MX Blacks, MX Clears on layer toggles).
Das S Professional (was MX Blues, now Ghetto Reds).
G80-11900.
ML-4400 (2x) Cherry MY boards.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios, tactile MOD-H, Aristotles, MX clears
« Reply #22 on: Tue, 26 June 2018, 13:40:50 »
The PCB is from falbatech. If I'm not mistaken they're the same as the standard ergodox PCB that massdrop offered.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios, tactile MOD-H, Aristotles, MX clears
« Reply #23 on: Thu, 05 July 2018, 17:44:51 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios, tactile MOD-H, Aristotles, MX clears
« Reply #24 on: Sun, 15 July 2018, 15:55:51 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios, tactile MOD-H, Aristotles, MX clears
« Reply #25 on: Wed, 25 July 2018, 13:53:44 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios, tactile MOD-H, Aristotles, MX clears
« Reply #26 on: Fri, 03 August 2018, 18:48:32 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios, tactile MOD-H, Aristotles, MX clears
« Reply #27 on: Wed, 08 August 2018, 18:06:29 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios, tactile MOD-H, Aristotles, MX clears
« Reply #28 on: Sun, 19 August 2018, 13:04:07 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios, tactile MOD-H, Aristotles, MX clears
« Reply #29 on: Wed, 29 August 2018, 12:45:11 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios, tactile MOD-H, Aristotles, MX clears
« Reply #30 on: Fri, 07 September 2018, 12:47:08 »
Added an asking price to the ergodox.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios, tactile MOD-H, Aristotles, MX clears
« Reply #31 on: Thu, 20 September 2018, 13:09:15 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios, tactile MOD-H
« Reply #32 on: Mon, 24 September 2018, 21:52:35 »
Aristotles & MX clears sold.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios, tactile MOD-H
« Reply #33 on: Fri, 05 October 2018, 15:58:10 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios, tactile MOD-H
« Reply #34 on: Tue, 16 October 2018, 15:06:41 »
bump

Offline zutroy

  • Trade Count: (1)
  • Posts: 45
  • Location: Toronto
Re: [FS] aluminum Ergodox, Zealencios, tactile MOD-H
« Reply #35 on: Wed, 17 October 2018, 07:06:07 »
PMing

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios
« Reply #36 on: Wed, 17 October 2018, 19:40:39 »
Tactile MOD-Hs sold.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios
« Reply #37 on: Thu, 01 November 2018, 15:52:53 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Dactyl-Manuform, aluminum Ergodox, Zealencios
« Reply #38 on: Wed, 07 November 2018, 15:35:41 »
Added dactyl-manuform for sale.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Dactyl-Manuform, aluminum Ergodox, Zealencios
« Reply #39 on: Sat, 17 November 2018, 15:46:47 »
bump

Offline d9000

  • Trade Count: (0)
  • Posts: 2
Re: [FS] Dactyl-Manuform, aluminum Ergodox, Zealencios
« Reply #40 on: Tue, 20 November 2018, 07:28:04 »
I'm curious, how/where did you get the Ergodox case made?

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Dactyl-Manuform, aluminum Ergodox, Zealencios
« Reply #41 on: Tue, 20 November 2018, 13:35:08 »
Most of the plates were from AKmalamute's group buy years ago. The switchplate & some spacers were laser cut from a local shop, the tenting feet were cut locally as well.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Dactyl-Manuform, aluminum Ergodox, Zealencios
« Reply #42 on: Sat, 01 December 2018, 19:18:54 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Dactyl-Manuform, aluminum Ergodox, Zealencios
« Reply #43 on: Wed, 12 December 2018, 13:42:57 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios
« Reply #44 on: Thu, 20 December 2018, 19:03:51 »
Dactyl-manuform sold.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios
« Reply #45 on: Tue, 01 January 2019, 12:59:45 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios
« Reply #46 on: Wed, 09 January 2019, 17:04:03 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios
« Reply #47 on: Tue, 15 January 2019, 15:21:09 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios
« Reply #48 on: Thu, 24 January 2019, 16:04:26 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios
« Reply #49 on: Wed, 30 January 2019, 13:40:22 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios
« Reply #50 on: Mon, 04 February 2019, 10:16:47 »
bump

Offline JustCallMeCrash

  • Trade Count: (0)
  • Posts: 218
  • Location: NC, USA
  • ErgoDox Lover
Re: [FS] aluminum Ergodox, Zealencios
« Reply #51 on: Sat, 09 February 2019, 05:24:58 »
Bump for Loligagger
GLWS
ErgoDoxen 6 total: 1x Cherry MX Browns, Cherry MX Clears, 35g Ghetto Reds, 80g Gateron Yellows, NovelKeys Pale Blues, NovelKeys Box Navy.
Preonic 2 total: OG Gateron Yellows (GMK silencer clips), TBD (unassembled v2).
XD-75 (mixed Gateron Yellows, MX Blacks, MX Clears on layer toggles).
Das S Professional (was MX Blues, now Ghetto Reds).
G80-11900.
ML-4400 (2x) Cherry MY boards.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios
« Reply #52 on: Mon, 18 February 2019, 17:02:43 »
Thanks.

bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios
« Reply #53 on: Fri, 01 March 2019, 13:24:53 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios
« Reply #54 on: Mon, 11 March 2019, 16:59:28 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios
« Reply #55 on: Mon, 18 March 2019, 17:35:31 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios
« Reply #56 on: Fri, 29 March 2019, 15:52:19 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios
« Reply #57 on: Wed, 10 April 2019, 13:15:46 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios
« Reply #58 on: Tue, 23 April 2019, 12:49:37 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox, Zealencios
« Reply #59 on: Mon, 06 May 2019, 15:58:23 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox
« Reply #60 on: Wed, 08 May 2019, 15:21:17 »
Zealencios sold.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox
« Reply #61 on: Fri, 17 May 2019, 18:58:57 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox
« Reply #62 on: Thu, 30 May 2019, 13:27:14 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox
« Reply #63 on: Mon, 10 June 2019, 16:22:08 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] aluminum Ergodox
« Reply #64 on: Fri, 28 June 2019, 13:18:48 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Aluminum Ergodox, Krytox
« Reply #65 on: Fri, 12 July 2019, 17:48:23 »
Added krytox for sale.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Aluminum Ergodox, Krytox [WTB] MT3 Godspeed keycap
« Reply #66 on: Wed, 17 July 2019, 16:40:04 »
WTB an MT3 godspeed keycap as well.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Aluminum Ergodox, Krytox [WTB] MT3 Godspeed novelty
« Reply #67 on: Fri, 02 August 2019, 13:06:21 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Aluminum Ergodox, Krytox [WTB] MT3 Godspeed novelty
« Reply #68 on: Fri, 06 September 2019, 16:20:30 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Aluminum Ergodox, Krytox [WTB] MT3 Godspeed novelty
« Reply #69 on: Tue, 08 October 2019, 12:58:21 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Aluminum Ergodox, Krytox [WTB] MT3 Godspeed novelty
« Reply #70 on: Fri, 15 November 2019, 17:59:25 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Aluminum Ergodox, Krytox, Cream/Zealios [WTB] MT3 Godspeed novelty
« Reply #71 on: Tue, 19 November 2019, 18:34:51 »
Added cream/zealio switches for sale.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Aluminum Ergodox, Krytox, Cream/Zealios [WTB] MT3 Godspeed novelty
« Reply #72 on: Wed, 04 December 2019, 18:01:42 »
Lowered the price on the cream/zealios.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Aluminum Ergodox, Krytox [WTB] MT3 Godspeed novelty
« Reply #73 on: Sun, 08 December 2019, 16:29:00 »
Cream/zealio switches sold.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Dactyl-Manuforms, Ergodox, Krytox
« Reply #74 on: Mon, 30 December 2019, 16:58:16 »
Added a few dactyl-manuforms for sale.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Dactyl-Manuforms, Ergodox, Krytox
« Reply #75 on: Sat, 25 January 2020, 19:11:08 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Dactyl-Manuforms, Ergodox, Krytox
« Reply #76 on: Sun, 16 February 2020, 13:47:13 »
bump

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Dactyl-Manuforms, Ergodox, Krytox
« Reply #77 on: Thu, 20 February 2020, 18:27:38 »
Box navy dactyl-manuform sold.

Offline indrogal

  • Trade Count: (0)
  • Posts: 0
Re: [FS] Dactyl-Manuforms, Ergodox, Krytox
« Reply #78 on: Fri, 21 February 2020, 23:57:26 »
PMed about one of the manuforms.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Dactyl-Manuform, Ergodox, Krytox
« Reply #79 on: Sat, 22 February 2020, 16:48:38 »
Holy panda dactyl-manuform now sold.

Offline Loligagger

  • Trade Count: (2)
  • Thread Starter
  • Posts: 261
  • Location: ON, Canada
Re: [FS] Dactyl-Manuforms, Ergodox, Krytox
« Reply #80 on: Mon, 24 February 2020, 17:41:27 »
Added NK cream dactyl-manuform for sale.