Author Topic: [GB] budget96 - Extras Available  (Read 82537 times)

0 Members and 1 Guest are viewing this topic.

Offline donutcat

  • * Vendor
  • Thread Starter
  • Posts: 1135
  • Location: Shelby, NC
  • I have ideas. Sometimes they're even good ideas.
    • Donut Cables
Re: [GB] budget96 Now Live!
« Reply #50 on: Sun, 27 May 2018, 16:34:24 »
Also, something else of interest, if you are one of the people looking for assembly for your board, when you get your initial invoice just message/email me to let me know and I'll adjust the invoice. A couple people have already mentioned it in the form and contacted me, and I want to be sure I get to everyone that wants it.

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Posts: 14665
  • Location: ¯\(°_o)/¯
  • because reasons.......
Re: [GB] budget96 Now Live!
« Reply #51 on: Sun, 27 May 2018, 19:08:24 »
Also, something else of interest, if you are one of the people looking for assembly for your board, when you get your initial invoice just message/email me to let me know and I'll adjust the invoice. A couple people have already mentioned it in the form and contacted me, and I want to be sure I get to everyone that wants it.
How much is assembly?

Sent from my SM-G930V using Tapatalk


Offline donutcat

  • * Vendor
  • Thread Starter
  • Posts: 1135
  • Location: Shelby, NC
  • I have ideas. Sometimes they're even good ideas.
    • Donut Cables
Re: [GB] budget96 Now Live!
« Reply #52 on: Sun, 27 May 2018, 19:41:14 »
Assembly will be $25 for just switches(supplied by you) and +$8 for in-switch LEDs. Details will be worked out in email on a case-by-case basis.

Offline kmfmppl

  • Posts: 39
Re: [GB] budget96 Now Live!
« Reply #53 on: Mon, 28 May 2018, 09:57:57 »
We're actually up to 10-11 EU orders right now, so that could definitely be an option. I'll have to check with my usual EU proxy buddy and see what the prices would be for bulk shipment to them and then their domestic shipping.

Sweet!

Offline Butter

  • Posts: 241
Re: [GB] budget96 Now Live!
« Reply #54 on: Mon, 28 May 2018, 12:31:56 »
Will the pcb fit ZZ96?

Offline donutcat

  • * Vendor
  • Thread Starter
  • Posts: 1135
  • Location: Shelby, NC
  • I have ideas. Sometimes they're even good ideas.
    • Donut Cables
Re: [GB] budget96 Now Live!
« Reply #55 on: Mon, 28 May 2018, 13:12:02 »
Will the pcb fit ZZ96?

Looks like it will according to the standoffs in the case.

Offline donutcat

  • * Vendor
  • Thread Starter
  • Posts: 1135
  • Location: Shelby, NC
  • I have ideas. Sometimes they're even good ideas.
    • Donut Cables
Re: [GB] budget96 Now Live!
« Reply #56 on: Mon, 28 May 2018, 15:05:41 »
Small update, PayPal is apparently having an issue on their end with their batch invoicing setup so I'm currently unable to work on the invoices until that's back up and running. In the meantime I'll just leave the form open since we actually gained 25 orders in the past 24hrs, a huge boost. Here's where we are on the numbers right now


PCBs
    Purple - 60/100, 50 MOQ hit!
    Matte black - 77/100, 50 MOQ hit!
   

Plates
    Black - 48/50, 10 MOQ hit, 25 unit price drop hit!
    White - 46/50, 10 MOQ hit, 25 unit price drop hit!
    Blue - 7/10, pushed to 10 MOQ!
    Green - 11/25, 10 MOQ hit!
    Red - 1/10
    Yellow - 3/10
   

Middle and Hipro layers
    Middles - 119/60, 15 MOQ 30 unit and 60 unit price drops hit!
    Hipro - 40/60, 15 MOQ hit, 30 unit price drop hit!

GMK Stabs - 126/100, pushed to MOQ!

Current prices:
PCBs - $30/each, both at MOQ
Plates - $25/set, Black and White plates - $25 $20/set!
Middles - $37 $33 $30!
Hipro - $47 $43
Stabs - $13

Base kit(PCB, case kit) current price - $85
Base kit w/ black/white plates - $80

An absolutely huge push on the PCBs with a good push for the plates as well. White and black plates are so close I know they'll be able to hit with the form open another day or so. Hell, the black PCBs might even have a chance at the price drop at this rate :3

Offline ideus

  • * Exalted Elder
  • Posts: 7578
  • Location: In the middle of nowhere.
  • Björkö.
Re: [GB] budget96 Now Live!
« Reply #57 on: Mon, 28 May 2018, 17:39:43 »
It is really great to see interest in affordable custom keyboards. This initiative takes the keyboard to its roots: afordability, efficiency and convinience for computer input needs.

Offline donutcat

  • * Vendor
  • Thread Starter
  • Posts: 1135
  • Location: Shelby, NC
  • I have ideas. Sometimes they're even good ideas.
    • Donut Cables
Re: [GB] budget96 - Invoicing in progress, form still open
« Reply #58 on: Tue, 29 May 2018, 15:54:16 »
5/29/18
Worked with an extremely helpful PayPal service rep to get a workaround for the currently issues they're having, so I'll begin on the sorting and conversion process today and invoice should start being sent tomorrow since I have to go to my brothers' performance tonight. I'm leaving the form open while working on the invoices in case any stragglers want to get in.

Offline donutcat

  • * Vendor
  • Thread Starter
  • Posts: 1135
  • Location: Shelby, NC
  • I have ideas. Sometimes they're even good ideas.
    • Donut Cables
Re: [GB] budget96 - Invoicing in progress, form still open
« Reply #59 on: Wed, 30 May 2018, 16:27:09 »
Invoices should be sent now. Be sure to let me know if anything is incorrect before you pay it so I can still edit the invoice. Shipping will be invoiced when stuff is ready to ship out since some design changes have made the weights a little different. For the few of you that have ordered them, Red and Yellow plates will also be produced since I was able to wiggle a little bit to be able to order them.

Offline danielucf

  • Horrible Mailman
  • * Elevated Elder
  • Posts: 2465
  • Location: Orlando
  • Hmmmm beer.
Re: [GB] budget96 - Invoicing in progress, form still open
« Reply #60 on: Wed, 30 May 2018, 16:27:10 »
Just got my invoice but it didn't include shipping. Is that going to be charged later?
VE.A 67g Zealios | GH60 MX Clears |

Offline UsualSuspectXXX

  • Posts: 3456
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] budget96 - Invoicing in progress, form still open
« Reply #61 on: Wed, 30 May 2018, 16:30:20 »
It's happening!!



Just got my invoice but it didn't include shipping. Is that going to be charged later?

... Shipping will be invoiced when stuff is ready to ship out since some design changes have made the weights a little different. ...

Offline LogicBomb

  • Posts: 7
  • Beige Enthusiast
Re: [GB] budget96 - Invoicing in progress, form still open
« Reply #62 on: Wed, 30 May 2018, 16:32:18 »
Paid! Super exited for these. Glad red and yellow plates are being made too.  :thumb:

Offline HotRoderX

  • Posts: 699
Re: [GB] budget96 - Invoicing in progress, form still open
« Reply #63 on: Wed, 30 May 2018, 16:35:21 »
Got the invoice but had a quick question. I noticed the middle layer wasn't being shown, Thought it did show 1 Case Kit Which could be the middle. I wanted to double check thought.

Offline donutcat

  • * Vendor
  • Thread Starter
  • Posts: 1135
  • Location: Shelby, NC
  • I have ideas. Sometimes they're even good ideas.
    • Donut Cables
Re: [GB] budget96 - Invoicing in progress, form still open
« Reply #64 on: Wed, 30 May 2018, 17:09:24 »
Got the invoice but had a quick question. I noticed the middle layer wasn't being shown, Thought it did show 1 Case Kit Which could be the middle. I wanted to double check thought.

Case kit includes the middle piece like it did on the form submission.

Offline _joe_king

  • Posts: 61
Re: [GB] budget96 - Invoices Sent!
« Reply #65 on: Wed, 30 May 2018, 17:20:23 »
Paid! Thanks for doing this GB :)

Offline sacklunch

  • Posts: 43
Re: [GB] budget96 - Invoices Sent!
« Reply #66 on: Wed, 30 May 2018, 17:43:45 »
Paid; thanks dude!

Offline kmfmppl

  • Posts: 39
Re: [GB] budget96 - Invoices Sent!
« Reply #67 on: Thu, 31 May 2018, 03:56:14 »
Paid! Great that so many options are being made :) personally doing a white build, but looking forward to see the yellow ones

Offline Sifo

  • Alter
  • * Exquisite Elder
  • Posts: 6906
  • Location: #GOLDSPRINGS, #LEGITBALLIN
  • I like blue.
Re: [GB] budget96 - Invoices Sent!
« Reply #68 on: Thu, 31 May 2018, 09:59:48 »
paed
(Forever) Illustrious.

Offline donutcat

  • * Vendor
  • Thread Starter
  • Posts: 1135
  • Location: Shelby, NC
  • I have ideas. Sometimes they're even good ideas.
    • Donut Cables
Re: [GB] budget96 - Invoices Sent!
« Reply #69 on: Fri, 01 June 2018, 15:15:50 »
Sitting at 33 unpaid right now with 2 drops so far, not bad so far. I've talked with a couple people about some delayed payments so that's no biggie. Hoping to have all payments and be ready to start placing orders by the end of next week. Right now the order priority is PCBs and acrylic layers since they seem to be what's going to take the longest. We've actually got quite a few more PCBs than the manu anticipated, so right now the estimate on their production is 20-30 days, but that might go up. I'm also ordering another set of proto plates later today to check all the cutouts for the compatible layouts and to doublecheck that our mounting solution for the countersunk screws isn't going to cause any issues.

Offline donutcat

  • * Vendor
  • Thread Starter
  • Posts: 1135
  • Location: Shelby, NC
  • I have ideas. Sometimes they're even good ideas.
    • Donut Cables
Re: [GB] budget96 - Invoices Sent!
« Reply #70 on: Tue, 05 June 2018, 12:20:09 »
23 unpaid right now. Reminder that the technical due date for payment is tomorrow, so please remember to pay. Also a reminder that dodging invoices makes you subject to my terms and conditions page linked in the invoices, which may include blacklisting from future invoiced sales and GBs I conduct.

Offline kyoumau

  • Posts: 33
  • Location: Canada
Re: [GB] budget96 - Invoices Sent!
« Reply #71 on: Tue, 05 June 2018, 13:03:44 »
The shipping fees to Canada will be 17$? Or higher?


Offline donutcat

  • * Vendor
  • Thread Starter
  • Posts: 1135
  • Location: Shelby, NC
  • I have ideas. Sometimes they're even good ideas.
    • Donut Cables
Re: [GB] budget96 - Invoices Sent!
« Reply #72 on: Tue, 05 June 2018, 13:08:36 »
The shipping fees to Canada will be 17$? Or higher?

We actually got 8 orders for Canada, so I'll be looking for a proxy to help keep shipping costs down. Should also help with customs fees and such as well.

Offline azachhh

  • Posts: 74
  • Location: Tennessee
Re: [GB] budget96 - Invoices Sent!
« Reply #73 on: Thu, 07 June 2018, 14:56:52 »
What’s the good word? Everybody pay up??

Offline donutcat

  • * Vendor
  • Thread Starter
  • Posts: 1135
  • Location: Shelby, NC
  • I have ideas. Sometimes they're even good ideas.
    • Donut Cables
Re: [GB] budget96 - Invoices Sent!
« Reply #74 on: Thu, 07 June 2018, 16:42:43 »
12 currently that haven't paid. I'll begin aggressive reminders while working on the 2nd round of invoices on the few late submissions.

Offline HotRoderX

  • Posts: 699
Re: [GB] budget96 - Invoices Sent!
« Reply #75 on: Thu, 07 June 2018, 19:42:48 »
I got mine paid up and am now super excited. I am thinking might get some extra Mod-H switches or do some DIY switches ((First set)) for this board. I been given some thought to transplanting Burnt orange springs into some linear's.

Offline azachhh

  • Posts: 74
  • Location: Tennessee
Re: [GB] budget96 - Invoices Sent!
« Reply #76 on: Thu, 07 June 2018, 20:36:59 »
12 currently that haven't paid. I'll begin aggressive reminders while working on the 2nd round of invoices on the few late submissions.

How will non payment affect price points? If at all.

Offline kyoumau

  • Posts: 33
  • Location: Canada
Re: [GB] budget96 - Invoices Sent!
« Reply #77 on: Sat, 09 June 2018, 20:16:13 »
12 currently that haven't paid. I'll begin aggressive reminders while working on the 2nd round of invoices on the few late submissions.

So, did they pay? How will that affect?


Offline donutcat

  • * Vendor
  • Thread Starter
  • Posts: 1135
  • Location: Shelby, NC
  • I have ideas. Sometimes they're even good ideas.
    • Donut Cables
Re: [GB] budget96 - Invoices Sent!
« Reply #78 on: Sat, 09 June 2018, 21:55:03 »
Non-payment of those invoices will at most affect numbers slightly on some of the plates, but I will keep everything as it is for those who paid invoices even if that happens.

An additional reminder that invoice dodging puts you on a blacklist for future sales from me, as per my terms and conditions linked in the invoices.

Offline kyoumau

  • Posts: 33
  • Location: Canada
Re: [GB] budget96 - Invoices Sent!
« Reply #79 on: Sat, 09 June 2018, 22:41:49 »
Non-payment of those invoices will at most affect numbers slightly on some of the plates, but I will keep everything as it is for those who paid invoices even if that happens.

An additional reminder that invoice dodging puts you on a blacklist for future sales from me, as per my terms and conditions linked in the invoices.

Nice. ( That's why I paid you, I didn't want to be banned for all the interesting gmk sets that you'll maybe run one day XD )
Do you have and estimation date when will you be able to ship?


Offline HotRoderX

  • Posts: 699
Re: [GB] budget96 - Invoices Sent!
« Reply #80 on: Sun, 10 June 2018, 01:39:32 »
Non-payment of those invoices will at most affect numbers slightly on some of the plates, but I will keep everything as it is for those who paid invoices even if that happens.

An additional reminder that invoice dodging puts you on a blacklist for future sales from me, as per my terms and conditions linked in the invoices.


Hope you got mine I paid it a few days ago. I am sure you did and yea invoice dogging is kinda crap. The least they could do is contact you to let ya know something came up.

Offline donutcat

  • * Vendor
  • Thread Starter
  • Posts: 1135
  • Location: Shelby, NC
  • I have ideas. Sometimes they're even good ideas.
    • Donut Cables
Re: [GB] budget96 - Invoices Sent!
« Reply #81 on: Sun, 10 June 2018, 12:51:08 »
I'm tolerant of people that will take the time to contact me to tell me something's up and they can't pay or need an extension, but I have no patience anymore for people that can't be bothered and just ignore the invoice. I used to think it pretty harsh when I saw artisan makers doing it, but after long enough dealing with people like this I can completely understand it now.

Offline kyoumau

  • Posts: 33
  • Location: Canada
Re: [GB] budget96 - Invoices Sent!
« Reply #82 on: Sun, 10 June 2018, 13:03:30 »
I'm tolerant of people that will take the time to contact me to tell me something's up and they can't pay or need an extension, but I have no patience anymore for people that can't be bothered and just ignore the invoice. I used to think it pretty harsh when I saw artisan makers doing it, but after long enough dealing with people like this I can completely understand it now.

Yeah, it's pretty impolite. The GB is like an agreement between 2 sides, and both sides should honor their part in the agreement.
I hope it won't affect too much in your finances.


Offline ZROGST

  • Posts: 31
  • Location: Ashburn, VA
Re: [GB] budget96 - Invoices Sent!
« Reply #83 on: Sun, 10 June 2018, 14:48:31 »
I joined the GB for this and I'm excited about the timing I caught it at.   This will be one of my first board builds, so I'd love for the guys who also got kits to post some build logs either here or on youtube so I can board-a-long with you

Offline UsualSuspectXXX

  • Posts: 3456
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] budget96 - Invoices Sent!
« Reply #84 on: Sun, 10 June 2018, 22:05:49 »
I joined the GB for this and I'm excited about the timing I caught it at.   This will be one of my first board builds, so I'd love for the guys who also got kits to post some build logs either here or on youtube so I can board-a-long with you

I terrible at build logs, let alone pictures. But I happy to help your with any questions during your build.

Offline donutcat

  • * Vendor
  • Thread Starter
  • Posts: 1135
  • Location: Shelby, NC
  • I have ideas. Sometimes they're even good ideas.
    • Donut Cables
Re: [GB] budget96 - Invoices Sent!
« Reply #85 on: Tue, 12 June 2018, 13:33:25 »
Alright, good news:bad news time. Good news: the most recent protos are here for testing the cutouts for all of the possible layouts. Haven't be able to test them just yet though. Bad news: the quality of the plates is absolutely the worst I've ever seen on PCBs. If you want to see the damage, check https://imgur.com/a/lKlwRHB. I'm contacting them to see what they say about it and hopefully this isn't indicative of what to expect during the GB.

Second round invoices will be going out here shortly. They'll have a one week deadline. We still have 11 unpaid invoices. I will be starting aggressive reminders until the second round deadline before removing those orders and blacklisting the emails.

Some bits are already in like the bumpons for the cases and the washers for the stabs. As soon as invoices are paid I can submit the orders for the other components.

Offline _joe_king

  • Posts: 61
Re: [GB] budget96 - Invoices Sent!
« Reply #86 on: Tue, 12 June 2018, 17:32:17 »
Wow! hopefully that is just them sending out samples for layout purposes and not indicative of whats to come!!!

Alright, good news:bad news time. Good news: the most recent protos are here for testing the cutouts for all of the possible layouts. Haven't be able to test them just yet though. Bad news: the quality of the plates is absolutely the worst I've ever seen on PCBs. If you want to see the damage, check https://imgur.com/a/lKlwRHB. I'm contacting them to see what they say about it and hopefully this isn't indicative of what to expect during the GB.

Second round invoices will be going out here shortly. They'll have a one week deadline. We still have 11 unpaid invoices. I will be starting aggressive reminders until the second round deadline before removing those orders and blacklisting the emails.

Some bits are already in like the bumpons for the cases and the washers for the stabs. As soon as invoices are paid I can submit the orders for the other components.

Offline UsualSuspectXXX

  • Posts: 3456
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] budget96 - Invoices Sent!
« Reply #87 on: Tue, 12 June 2018, 21:35:05 »
Alright, good news:bad news time. Good news: the most recent protos are here for testing the cutouts for all of the possible layouts. Haven't be able to test them just yet though. Bad news: the quality of the plates is absolutely the worst I've ever seen on PCBs. If you want to see the damage, check https://imgur.com/a/lKlwRHB. I'm contacting them to see what they say about it and hopefully this isn't indicative of what to expect during the GB.

Second round invoices will be going out here shortly. They'll have a one week deadline. We still have 11 unpaid invoices. I will be starting aggressive reminders until the second round deadline before removing those orders and blacklisting the emails.

Some bits are already in like the bumpons for the cases and the washers for the stabs. As soon as invoices are paid I can submit the orders for the other components.

Damn. I explained that album to be like 3 or 4 pics. But it went on forever!

Offline HotRoderX

  • Posts: 699
Re: [GB] budget96 - Invoices Sent!
« Reply #88 on: Tue, 12 June 2018, 23:27:59 »
Alright, good news:bad news time. Good news: the most recent protos are here for testing the cutouts for all of the possible layouts. Haven't be able to test them just yet though. Bad news: the quality of the plates is absolutely the worst I've ever seen on PCBs. If you want to see the damage, check https://imgur.com/a/lKlwRHB. I'm contacting them to see what they say about it and hopefully this isn't indicative of what to expect during the GB.

Second round invoices will be going out here shortly. They'll have a one week deadline. We still have 11 unpaid invoices. I will be starting aggressive reminders until the second round deadline before removing those orders and blacklisting the emails.

Some bits are already in like the bumpons for the cases and the washers for the stabs. As soon as invoices are paid I can submit the orders for the other components.

Whats the plan if the manufacture say's thats as good as they will promise quality wise? Would you look for another manufacture or just go with that one and hope for the best.

Offline donutcat

  • * Vendor
  • Thread Starter
  • Posts: 1135
  • Location: Shelby, NC
  • I have ideas. Sometimes they're even good ideas.
    • Donut Cables
Re: [GB] budget96 - Invoices Sent!
« Reply #89 on: Fri, 15 June 2018, 20:56:49 »
JLC claims they'll do their best to avoid these issues in the future. I'm hoping they do, because the extent of the issues on these protos is inexcusable but changing manufacturers isn't really an option currently. The next cheapest PCB fab would be 64% more expensive than JLC, bringing the cost higher than I can afford and higher than I want to charge anyone.

Offline donutcat

  • * Vendor
  • Thread Starter
  • Posts: 1135
  • Location: Shelby, NC
  • I have ideas. Sometimes they're even good ideas.
    • Donut Cables
Re: [GB] budget96 - Invoices Sent!
« Reply #90 on: Sat, 16 June 2018, 01:35:41 »
The invoices that were notably overdue and repeatedly ignored have been cancelled and the recipients blacklisted. Currently there is one order from earlier this week that I'm waiting for, but they're within the time limit. Currently, this is what our numbers look like

Starting tomorrow I'll be beginning submitting orders to relevant vendors and fabs, though it is a weekend so there won't be immediate responses.

Offline Blar

  • Posts: 10
  • Location: Minnesota.
  • ah.
    • Email
Re: [GB] budget96 - Invoices Sent!
« Reply #91 on: Mon, 18 June 2018, 11:41:15 »
The invoices that were notably overdue and repeatedly ignored have been cancelled and the recipients blacklisted.



nice :thumb:
ah.

Offline Evolken

  • Posts: 8
Re: [GB] budget96 - Invoices Sent!
« Reply #92 on: Mon, 18 June 2018, 14:20:14 »
Do you think the group buy is still on schedule to ship out by the end of June?

Offline donutcat

  • * Vendor
  • Thread Starter
  • Posts: 1135
  • Location: Shelby, NC
  • I have ideas. Sometimes they're even good ideas.
    • Donut Cables
Re: [GB] budget96 - Invoices Sent!
« Reply #93 on: Mon, 18 June 2018, 14:24:17 »
Do you think the group buy is still on schedule to ship out by the end of June?

It's more likely to be closer to the "mid July" part of the date range I initially gave. I've no doubt plates will be a quick turnover, but getting the cut parts from JOlimon will take some time as well as PCB production, and I've run into a potential delay with GMK since emailing them about the stabs returned an automatic reply that my contact won't be back in the office until July 5th. Hopefully this might be a mistake, but if not it could certainly be a hindrance.

Offline MatchstickMan

  • Posts: 129
  • Location: Seattle
  • CAD Jockey - YOLO Enthusiast
Re: [GB] budget96 - Invoices Sent!
« Reply #94 on: Mon, 18 June 2018, 14:37:56 »
I was just seeing on the HS60 GB that the GMK stabs were causing delays. Don't have any recommendations, but more as an FYI.
Current Projects:
- MW-01 -- Left-handed Numpad
- Full Split (Currently on hold)

Offline Evolken

  • Posts: 8
Re: [GB] budget96 - Invoices Sent!
« Reply #95 on: Mon, 18 June 2018, 20:44:33 »
Do you think the group buy is still on schedule to ship out by the end of June?

It's more likely to be closer to the "mid July" part of the date range I initially gave. I've no doubt plates will be a quick turnover, but getting the cut parts from JOlimon will take some time as well as PCB production, and I've run into a potential delay with GMK since emailing them about the stabs returned an automatic reply that my contact won't be back in the office until July 5th. Hopefully this might be a mistake, but if not it could certainly be a hindrance.

Thanks for the quick response.

Offline donutcat

  • * Vendor
  • Thread Starter
  • Posts: 1135
  • Location: Shelby, NC
  • I have ideas. Sometimes they're even good ideas.
    • Donut Cables
Re: [GB] budget96 - Invoices Sent!
« Reply #96 on: Wed, 20 June 2018, 16:09:54 »
Orders for the acrylic middles and hipros has been placed and paid for with materials for them currently on order.

Requested an invoice for stabs but nothing back yet due to the situation mentioned previously.

Plates are not ordered yet as we're waiting on one last revision to the design to clean up some spots on the bottom row where cutouts are making spots that are too thin for the FR4

The tiny bits we're removing to clean it up

I'm currently talking with my PCB designer to work out the last details for shipping cost and numbers ordered. I'm also adding some samples to the order for the other layouts the designer has available so I can evaluate them for future budget-series boards.

Bumpons and stab washers are already on hand.


Offline MatchstickMan

  • Posts: 129
  • Location: Seattle
  • CAD Jockey - YOLO Enthusiast
Re: [GB] budget96 - Invoices Sent!
« Reply #97 on: Wed, 20 June 2018, 16:50:01 »
I love hearing that you're looking at more budget boards. Between the Contra and this, I'll be racking up quite the collection!

I would still very much like to see a split spacebar version of a 96 board or full 104 or TKL for that matter.
Current Projects:
- MW-01 -- Left-handed Numpad
- Full Split (Currently on hold)

Offline HotRoderX

  • Posts: 699
Re: [GB] budget96 - Invoices Sent!
« Reply #98 on: Wed, 20 June 2018, 18:36:15 »
would love to see a budget TKL and a semi budget carbon fiber TKL would be amazing. I know there only so much cost savings with carbon fiber but would be nice.

Offline azachhh

  • Posts: 74
  • Location: Tennessee
Re: [GB] budget96 - Payment Submissions
« Reply #99 on: Thu, 28 June 2018, 19:40:57 »
What’s the latest?