Author Topic: [WTS]Ultrasonic Cleaned Vintage Blacks [LF]Resurrection 420  (Read 8833 times)

0 Members and 1 Guest are viewing this topic.

Offline PerniciousPony

  • Trade Count: (3)
  • Thread Starter
  • Posts: 93
  • Location: 37th dead world
    These are the last batches from my lot.  I may harvest more in the future, but not anytime soon

    All sold out again, and out of boards to harvest.


    • These are desoldered with a Hakko FR-410 by yours truly.
    • All switches are harvested from Wyse WY-50 keyboards.
    • Switches from each board are kept together.
    • 100 switches per board/batch.
    • Boards likely manufactured between 1984-86.
    • Donor boards seem to be heavily used.
    • Service records dating as late as 2012 found attached to several boards.
    • All switches ultrasonic cleaned

    Shipping options are:
    • $3.50: Bubble mailer(max 100)
    • $7.50: Small flat rate box(max 200)
    • $13: Medium flat rate box(~1000 switches, haven't filled one yet)
    • International: Put your shipping address in the form and I'll run several quotes for you.

    Pricing goes as follows: base price is $45 for Row 1 north cutout as that seems to be the most common.  For row 2, pricing starts at $50, and row 3 pricing starts at $55. I've based this on how common switches from my lot are, with Row 1 being the most common, Row 2 being less common, and Row 3 being uncommon(only 3-4 boards in my lot have been Row 3 so far).  The same goes for stem cutouts.  North cutout is by far the most common, so it included in the base cost of $45 per 100.  No cutout is $5 as it is less common, and south cutout is an additional $5 as it is the least common.  I've made a table below to break this down if it is confusing.   

    PricingRow 1     Row 2     Row 3     
    North  $45    $50    $55 
    No Cutout       $50    $55    $60 
    South  $55    $60    $65 

    Quantities available are as follows:

    AvailableRow 1     Row 2     Row 3     
    North   0      1      0   
    No Cutout        0      4      0   
    South   0      1      0   

    Odd boards:
    I had one WY-50 that is a mix of north and no cutout row 1 switches. 80 north, 20 no cutout. $45

    If you are confused by rows and cutouts, I'll link a few posts/threads that may be helpful:
    https://imgur.com/gallery/92tQmdn
    https://www.reddit.com/r/MechanicalKeyboards/comments/5sbary/vintage_cherry_mx_black_switch/ddfqkcm/
    https://geekhack.org/index.php?topic=38921.0

    Trampstamp!

    Also looking for a Resurrection 420!



    More

    I've had some car troubles recently and need to liquidate some things to pay for repairs.  Not FCFS.  I have more things I may add throughout the night.  Will do OBO on anything as I need these to move. Prices are shipped CONUS and inclusive of fees.  Willing to ship internationally at buyers expense.

    Also looking for a Resurrection 420. I have more things I can offer if you've got this cap.

    METAL

    Alps Mech27v1.  One off copper alloy 110 plate with patina, Leeku alps pcb, SKCM Orange Alps, SGI caps.  Don't have a stab wire that fits right shift, all other keys have stabilizers installed. $600

    Alps Minivan:Pristine SKCM brown alps, nickel plate, DSA Lightcycle.  Goomba included. $420

    Percent Canoe:Cyan top and plate, black base, cyan weight.  Built with gat clears and what I'm guessing are ~78g springs.  Stabs are kinda rattly, switches feel good though.  Can rebuild this with different switches and better stabs if interested.  $420

    60%:Zeal60v2 pcb, acrylic plate, zeal stabs, 78g zealios(I think), and cheap purple case with ss weight.  Case has some damage to the top left corner from the previous owner enlarging the usb cutout, I have no idea why this was done.  Board will come with the amelia.  $420

    RF89U: There's a glam shot of the board in a norbaforce.  I bought this board completely gutted, and have pulled domes, springs, housings, and sliders from another board to get it back together.  Uses a ps/2 cable.  Board is 45g uniform.  I do not have a keyset for this other than the ZH0400 caps.  $150 $125 for the board in it's stock case, without caps.  Will bundle with the ZH0400 board/keyset for a discount.  If you want to buy both, I can swap the hipro housings into the 89U for you, but it'll take some time.


    PLASTIC

    DSA Penumbra: Set hasn't been out of the bag since I took this timestamp.  Only mounted once or twice for photos, never typed on. $200 $175

    SA Chronicler: Same deal with this set, only mounted once or twice for photos, never used.  Base kit + RGBY mods.  $222 $175

    SA Budapest: Alpha and Modifier kits.  Only used for pictures.  $300

    SA Calm Depths: R1 Calm Depths.  Kits included are alphas, mods, numpad, tsangan, 2x gamer sets.  No shine, set is essentially unused.  Can lay out all caps if needed. $500 $450

    HiPro: I've got two HiPro boards for sale today.  One is a ZH0400, JP layout with sublegends. Got this board used, has some small scuffs on some keys, overall in great shape.  Other is standard, unused 104UG. $275 $250 for the 104UG, $666 $600 for the ZH0400

    Tai Hao Hawaii: free with any purchase  :blank:

    RESIN

    Orochis: $75 each, or $140 for both

    Reaper + moba set:  TMX reaper, MX moba set.  Small bubble on front side of leftmost cap.  $500

    Bronin: Topre bronin.  Can't remember the CW.  $140

    Mummy iii:Diet Pink, mx stem.  $400

    V1 Shells: Crayon and gold glitter shells.  Both topre. $80 each, or $150 bundled.

    V2 Shell: MX, can't remember the CW. $100

    Frankenfurts: Full set in topre. $420 for all of them, not interested in splitting. Note that there are 9 in the pic of them on the board, but there are only 8 in the set.  I was sent a duplicate of one of the GID one's on accident, only have one of each now as I gave the dupe away.




     






    More

    Looking to buy or trade for an OTD 356 Mini.   Can add PP to balance a trade.
    Looking to trade for a 910, pref purple or poly but open to all.
    Looking to buy or trade for an SSK, preferably gray label.
    Also interested in kwk/kbk, clacks and grimaces.

    Keps for trade
    Reaper, BBv2, Ribbit and erik pls are tmx.  Depth black clack is topre, rest are mx.

    Holy Pandas
    I have 87 holy pandas, and several extra pandas, not selling/trading the board.

    SKCM Brown Alps MiniVan w/DSA Light Cycle
    Pristine brown alps pulled from an IBM 5140, nickel plate, black case, usb-c pcb.
    Some glam shots of the minivan here.

    SKCM Salmon Alps Mech27v1
    Gold Mech27v1, copper alloy 110 plate with custom patina, Leeku pcb, and salmon alps pulled from an m0116.  Caps are Dell AT101 PBT dyesubs that were dyed black by E3Eves
    Pic of the plate/switches and a gif of the process as well as a better pic of the keyset.
    extra pic

    M65-A
    Silver Top, brass plate, QMK pcb, tealios, screw in GMK stabs.  Have black aluminum and nylon bases, and a brass weight.
    Better shot of the board.

    FMJ
    Black FMJ from Originative.  Design 2(the one with the decorative cutout around the board) with b.face, silver carbon fiber LeandreN plate, ergoclears with pink stickers and lubed zeal stabs.
    Better shot of the board.

    RF 104UG-Hi-Pro(YK2100) and RF 108UG-HiPro-JS(ZH0400)
    108 was used for a while, the 104 is basically BNIB.  Never typed on, several keys used to make molds, but otherwise untouched.
    Keysets can be used on an HHKB like this.
    [/list]
    « Last Edit: Sun, 19 May 2019, 08:52:41 by PerniciousPony »

    Offline molecularronin

    • Trade Count: (0)
    • Posts: 21
    Re: [WTT] Keps [WWTF] 356 mini v1
    « Reply #1 on: Mon, 14 May 2018, 17:16:04 »
    *0* these are so pretty and pink lol. GLWT!

    Offline PerniciousPony

    • Trade Count: (3)
    • Thread Starter
    • Posts: 93
    • Location: 37th dead world
    Re: [WTT] Keps [WWTF] 356 mini v1, poly 910
    « Reply #2 on: Tue, 15 May 2018, 12:59:00 »
    poly 910 added to wants list.

    Offline PerniciousPony

    • Trade Count: (3)
    • Thread Starter
    • Posts: 93
    • Location: 37th dead world
    Re: [WTT] Keps, Holy Pandas, Alps Boards [WWTF] 356 mini v1, poly 910
    « Reply #3 on: Sat, 02 June 2018, 08:27:01 »
    added some boards/caps to the listing.

    Offline crtexcnndrm99

    • Trade Count: (0)
    • Posts: 341
    • Location: Brisbane, Australia
    • *profile image used without permission* ;)
    Re: [WTT] Keps, Holy Pandas, Alps Boards [WWTF] 356 mini v1, poly 910
    « Reply #4 on: Sun, 03 June 2018, 04:22:25 »
    that Alps mech27 is unbelievable.
    You're a smooth smoothie, you know? ~ Gaear Grimsrud

    Offline PerniciousPony

    • Trade Count: (3)
    • Thread Starter
    • Posts: 93
    • Location: 37th dead world
    More stuff added.  Also will buy the 356 v1 now, or work out a partial trade if anyone is interested in that.

    Offline PerniciousPony

    • Trade Count: (3)
    • Thread Starter
    • Posts: 93
    • Location: 37th dead world
    boimp

    Offline PerniciousPony

    • Trade Count: (3)
    • Thread Starter
    • Posts: 93
    • Location: 37th dead world

    Offline molecularronin

    • Trade Count: (0)
    • Posts: 21
    Wow, I love your minivan plate, where the heck did you get it from?? I also love the holy pandas ;3

    Offline PerniciousPony

    • Trade Count: (3)
    • Thread Starter
    • Posts: 93
    • Location: 37th dead world
    Wow, I love your minivan plate, where the heck did you get it from?? I also love the holy pandas ;3

    Minivan plate is from the van man himself!  I believe he sells them as polished nickel plated or something along those lines.

    Offline snakeatermgs

    • Trade Count: (0)
    • Posts: 0
    pm sent dude.

    Offline tron

    • Trade Count: (0)
    • Posts: 136
    • Location: OH, USA
    PM Sent

    Offline SamirD

    • * Esteemed Elder
    • Trade Count: (0)
    • Posts: 1498
    • Location: HSV and SFO
    • on Buckling Springs since '88
      • http://www.huntsvillecarscene.com
    How much for the realforce 104 (that's the one with the ansi enter, right)?  What weighting is it?

    Offline maxf

    • Trade Count: (0)
    • Posts: 45
    nice collection - glws/t!

    Offline DJSnotBoogie

    • Trade Count: (0)
    • Posts: 49
    Would you be willing to sell the holy pandas or only trade?

    Offline sublime

    • Trade Count: (0)
    • Posts: 87
    Are you willing to sell either of the Topre boards, or only trade for them?

    Offline PerniciousPony

    • Trade Count: (3)
    • Thread Starter
    • Posts: 93
    • Location: 37th dead world
    Re: [WTS]Boards, Keysets, Resin [WTTF]Resurrection 420
    « Reply #16 on: Fri, 11 January 2019, 17:47:17 »
    boomp

    Offline PerniciousPony

    • Trade Count: (3)
    • Thread Starter
    • Posts: 93
    • Location: 37th dead world
    Re: [WTS]Ultrasonic Cleaned Vintage Blacks [WTTF]Resurrection 420
    « Reply #17 on: Wed, 13 March 2019, 22:47:59 »
    yub nub

    Offline Yesknine

    • Trade Count: (0)
    • Posts: 0
    Re: [WTS]Ultrasonic Cleaned Vintage Blacks [WTTF]Resurrection 420
    « Reply #18 on: Thu, 14 March 2019, 01:32:59 »
    Think I PM'd u, can u check ^^ tyty

    Offline PerniciousPony

    • Trade Count: (3)
    • Thread Starter
    • Posts: 93
    • Location: 37th dead world
    Re: [WTS]Ultrasonic Cleaned Vintage Blacks [WTTF]Resurrection 420
    « Reply #19 on: Thu, 21 March 2019, 22:30:19 »
    More switches desoldered and cleaned, OP updated.

    Offline noahf

    • Trade Count: (0)
    • Posts: 85
    Re: [WTS]Ultrasonic Cleaned Vintage Blacks [WTTF]Resurrection 420
    « Reply #20 on: Fri, 22 March 2019, 14:06:02 »
    pm sent

    Offline MMKB

    • Trade Count: (12)
    • Posts: 460
    • Location: norcal
    Re: [WTS]Ultrasonic Cleaned Vintage Blacks [WTTF]Resurrection 420
    « Reply #21 on: Fri, 22 March 2019, 17:19:17 »
    Interested in the vintage blacks. What is the difference between Row 1 and Row 2 wrt cutout and north/south?
            

    Offline PerniciousPony

    • Trade Count: (3)
    • Thread Starter
    • Posts: 93
    • Location: 37th dead world
    Re: [WTS]Ultrasonic Cleaned Vintage Blacks [WTTF]Resurrection 420
    « Reply #22 on: Sun, 24 March 2019, 22:39:21 »
    Interested in the vintage blacks. What is the difference between Row 1 and Row 2 wrt cutout and north/south?

    I've updated the OP with a few links to other posts that describe the differences. 

    Also, the amounts have been updated so that they are current, and more should be added tomorrow.

    Offline noahf

    • Trade Count: (0)
    • Posts: 85
    Re: [WTS]Ultrasonic Cleaned Vintage Blacks [WTTF]Resurrection 420
    « Reply #23 on: Mon, 25 March 2019, 15:41:38 »
    no joke ordered these Friday midday and received them Monday midday. Im on the completely opposite side of the great USA as Pernicious, so thank you for the fast shipment and answering all my lame questions!

    Offline PerniciousPony

    • Trade Count: (3)
    • Thread Starter
    • Posts: 93
    • Location: 37th dead world
    Re: [WTS]Ultrasonic Cleaned Vintage Blacks [WTTF]Resurrection 420
    « Reply #24 on: Thu, 04 April 2019, 21:49:20 »
    no joke ordered these Friday midday and received them Monday midday. Im on the completely opposite side of the great USA as Pernicious, so thank you for the fast shipment and answering all my lame questions!

    Glad they arrived so quickly!  And answering questions is half the fun  :p

    Offline Boingles

    • Trade Count: (0)
    • Posts: 9
    Re: [WTS]Ultrasonic Cleaned Vintage Blacks [LF]Resurrection 420
    « Reply #25 on: Sun, 07 April 2019, 00:51:02 »
    Filled the form on Friday, but not sure if it was received or if there are any left.

    Offline gabbbe

    • Trade Count: (0)
    • Posts: 86
    • Location: Brooklyn, NY
    Re: [WTS]Ultrasonic Cleaned Vintage Blacks [LF]Resurrection 420
    « Reply #26 on: Sun, 07 April 2019, 02:37:22 »
    Filled the form on Friday, but not sure if it was received or if there are any left.

    Same as you


    Sent from my iPhone using Tapatalk

    Offline MMKB

    • Trade Count: (12)
    • Posts: 460
    • Location: norcal
    Re: [WTS]Ultrasonic Cleaned Vintage Blacks [WTTF]Resurrection 420
    « Reply #27 on: Sun, 07 April 2019, 16:20:11 »
    Interested in the vintage blacks. What is the difference between Row 1 and Row 2 wrt cutout and north/south?

    I've updated the OP with a few links to other posts that describe the differences. 

    Also, the amounts have been updated so that they are current, and more should be added tomorrow.

    Thanks for putting together some description. Form submitted!
            

    Offline fatpolomanjr

    • Trade Count: (0)
    • Posts: 446
    Re: [WTS]Ultrasonic Cleaned Vintage Blacks [LF]Resurrection 420
    « Reply #28 on: Mon, 08 April 2019, 01:52:00 »
    I also filled the form out recently! It's either these or some retooled blacks if arrow stocks them again. Really love my 3204 lubed retooled blacks, but figured I should give vintage a try on this new build. They'll go into a hotswap board, so no more soldering/desoldering will happen to these bad boys. Should be fun!
    Some guys keep on saying they believe in Jesus, and keep doing a lot of shameful things.
    Current GH Classified Post (LF Arcade Floor, Garbield and CYM Otter/Keyng/Ork)

    Offline PerniciousPony

    • Trade Count: (3)
    • Thread Starter
    • Posts: 93
    • Location: 37th dead world
    Re: [WTS]Ultrasonic Cleaned Vintage Blacks [LF]Resurrection 420
    « Reply #29 on: Wed, 17 April 2019, 11:02:25 »
    Quantities updated. Will hopefully have ~6 more boards ready tomorrow as well

    Offline PerniciousPony

    • Trade Count: (3)
    • Thread Starter
    • Posts: 93
    • Location: 37th dead world
    Re: [WTS]Ultrasonic Cleaned Vintage Blacks [LF]Resurrection 420
    « Reply #30 on: Thu, 25 April 2019, 15:52:05 »
    Quantities update in OP

    Offline PerniciousPony

    • Trade Count: (3)
    • Thread Starter
    • Posts: 93
    • Location: 37th dead world
    Re: [WTS]Ultrasonic Cleaned Vintage Blacks [LF]Resurrection 420
    « Reply #31 on: Fri, 03 May 2019, 19:05:22 »
    Another batch of boards desoldered and cleaned.  Quantities in OP updated.

    Offline bigapplepietart

    • Trade Count: (0)
    • Posts: 64
    • Location: Montreal, Canada
    • Loves linears and classic keysets
    Re: [WTS]Ultrasonic Cleaned Vintage Blacks [LF]Resurrection 420
    « Reply #32 on: Fri, 03 May 2019, 19:30:04 »
    I'll take 100 R2 South Switches!
    Current Boards:
     hbcp (68g Vintage Blacks) | WKL Equinox (67g Sakurios)

    Past Boards:
    Klippe x Zeal60 (67g Sakurios) | KBDFans 8X V1 (62g Vintage Blacks) | GH60 rev. C (62g Ergo Clears) | FC660M (Cherry Blues) | Razer Blackwidow (Cherry Blues)

    Offline orangesoh

    • Trade Count: (0)
    • Posts: 13
    Re: [WTS]Ultrasonic Cleaned Vintage Blacks [LF]Resurrection 420
    « Reply #33 on: Fri, 03 May 2019, 22:45:36 »
    I will take 100 switches Row 2 North

    Offline orangesoh

    • Trade Count: (0)
    • Posts: 13
    Re: [WTS]Ultrasonic Cleaned Vintage Blacks [LF]Resurrection 420
    « Reply #34 on: Fri, 03 May 2019, 22:57:03 »
    Where can I fill up the forms?

    Offline gabbbe

    • Trade Count: (0)
    • Posts: 86
    • Location: Brooklyn, NY
    Re: [WTS]Ultrasonic Cleaned Vintage Blacks [LF]Resurrection 420
    « Reply #35 on: Fri, 03 May 2019, 22:57:54 »
    Where can I fill up the forms?

    Id love to get some too!


    Sent from my iPhone using Tapatalk

    Offline mellen

    • Trade Count: (0)
    • Posts: 34
    • Location: California
    Re: [WTS]Ultrasonic Cleaned Vintage Blacks [LF]Resurrection 420
    « Reply #36 on: Sat, 04 May 2019, 22:22:57 »
    will take a row 2 south bag

    Offline xera

    • Trade Count: (0)
    • Posts: 0
    Re: [WTS]Ultrasonic Cleaned Vintage Blacks [LF]Resurrection 420
    « Reply #37 on: Mon, 13 May 2019, 16:54:13 »
    PMed

    Offline PerniciousPony

    • Trade Count: (3)
    • Thread Starter
    • Posts: 93
    • Location: 37th dead world
    Re: [WTS]Ultrasonic Cleaned Vintage Blacks [LF]Resurrection 420
    « Reply #38 on: Thu, 16 May 2019, 21:14:58 »
    bump

    Offline Manticzeus

    • Trade Count: (0)
    • Posts: 27
    Re: [WTS]Ultrasonic Cleaned Vintage Blacks [LF]Resurrection 420
    « Reply #39 on: Fri, 17 May 2019, 06:05:51 »
    Pm

    Offline gooserino

    • Trade Count: (0)
    • Posts: 0
    Re: [WTS]Ultrasonic Cleaned Vintage Blacks [LF]Resurrection 420
    « Reply #40 on: Fri, 17 May 2019, 20:26:56 »
    Pm'ed