Author Topic: 【GB】JER-A06(80% and 20% pad)CNC and anodizing is completed 10.9  (Read 36433 times)

0 Members and 1 Guest are viewing this topic.

Offline JubJubCity

  • Posts: 321
  • Location: Bay Area
Re: 【GB】JER-A06(80% and 20% pad)CNC and anodizing is completed 10.9
« Reply #250 on: Sat, 01 December 2018, 00:48:50 »
I know SF is closed on the weekend at least in the states, i would suggest trying tomorrow.

I'm in Germany, but the tracking says that the shipment is shipped to London and signed for. OP is not replying to my e-mails and PMs on GH and SF express is telling me it's been signed for and ignoring me too. 750 bucks and months of waiting for this crap service. Does anyone have any idea what I can do about this? :(

OP's status: Last Active: Sat, 17 November 2018, 04:47:24
Not sure what else you could do, have you tried emailing him via his paypal email?

Offline alisonica

  • Posts: 92
  • Location: Germany
Re: 【GB】JER-A06(80% and 20% pad)CNC and anodizing is completed 10.9
« Reply #251 on: Sat, 01 December 2018, 01:54:10 »
Not sure what else you could do, have you tried emailing him via his paypal email?

Gonna try that now sir

Offline dantambok

  • Posts: 650
  • Location: Philippines
Re: 【GB】JER-A06(80% and 20% pad)CNC and anodizing is completed 10.9
« Reply #252 on: Sat, 01 December 2018, 03:06:53 »
From what i know.. best way to contact showerking or the JER designer is via QQ
Stuff  I have
More
2x TGR Alice / TGR 910 RE / TGR 910 CE / TGR 910 VKC / TGR Jane V2 / 2x Matrix 2.0 / Matrix 2.2 / Matrix 1.2OG / Lyn Whale v2 / Lyn EM7 v3 / DK Saver / Keycult No. 1/60 / Hachi / Kyuu / Duck Orion V2 / Percent Canoe / 2x TGRxSinga Unikorn / QXP / TX1800 V1 /  JER80 / TMO50 / Norbatouch / Poly Leaf60 / 2x 86u / ION i69 / LZ MP / Exclusive E6.5

Coming soon -- Jane V2 CE / Jane V2  / MXSS / Modern M0110 / FMJ80 / Rukia / IDB60 / Unikorn / 🔥 iS0 🔥 / Matrix Project F / HBCP / Space65 / 3x Matrix 1.2 / Noxary 280S

Lots of sets

Offline alisonica

  • Posts: 92
  • Location: Germany
Re: 【GB】JER-A06(80% and 20% pad)CNC and anodizing is completed 10.9
« Reply #253 on: Sat, 01 December 2018, 13:33:43 »
From what i know.. best way to contact showerking or the JER designer is via QQ

Do you have a QQ number for me? Please PM me. I can't seem to get in contact with him, been like this for a month now.

Offline dantambok

  • Posts: 650
  • Location: Philippines
Re: 【GB】JER-A06(80% and 20% pad)CNC and anodizing is completed 10.9
« Reply #254 on: Sat, 01 December 2018, 19:37:42 »
611725423       this is the JER group i think
Stuff  I have
More
2x TGR Alice / TGR 910 RE / TGR 910 CE / TGR 910 VKC / TGR Jane V2 / 2x Matrix 2.0 / Matrix 2.2 / Matrix 1.2OG / Lyn Whale v2 / Lyn EM7 v3 / DK Saver / Keycult No. 1/60 / Hachi / Kyuu / Duck Orion V2 / Percent Canoe / 2x TGRxSinga Unikorn / QXP / TX1800 V1 /  JER80 / TMO50 / Norbatouch / Poly Leaf60 / 2x 86u / ION i69 / LZ MP / Exclusive E6.5

Coming soon -- Jane V2 CE / Jane V2  / MXSS / Modern M0110 / FMJ80 / Rukia / IDB60 / Unikorn / 🔥 iS0 🔥 / Matrix Project F / HBCP / Space65 / 3x Matrix 1.2 / Noxary 280S

Lots of sets

Offline connectome

  • Posts: 2
Re: 【GB】JER-A06(80% and 20% pad)CNC and anodizing is completed 10.9
« Reply #255 on: Mon, 17 December 2018, 01:30:21 »
Got an email on October saying that my WK dark gray JER needs more anodizing
and was notified that it would begin shipping no later than late November;

Still got no notice any further and my emails and PMs aren't getting replied

Does anyone know how I can possibly get in contact with Shower King ?
Or do you have any suggestions on this issue? Need a little help on this


« Last Edit: Mon, 17 December 2018, 02:42:35 by connectome »

Offline RETURNISO

  • Posts: 464
  • Location: [ NOR ] ISO
  • I do get excited about keyboard stuff..
Re: 【GB】JER-A06(80% and 20% pad)CNC and anodizing is completed 10.9
« Reply #256 on: Wed, 20 February 2019, 19:32:47 »
Time for a R2?  :rolleyes:

Offline MajorKoos

  • Posts: 722
  • Location: Bay Area
  • 1 life please. Extra large.

Offline obtuse

  • Posts: 22
Re: 【GB】JER-A06(80% and 20% pad)CNC and anodizing is completed 10.9
« Reply #258 on: Wed, 06 March 2019, 04:48:40 »
Time for a R2?  :rolleyes:

Good plan.

Yes please, if there is one kb I want it is this one for sure!

Offline stoic-lemon

  • Posts: 963
  • Location: Saitama, Japan
Re: 【GB】JER-A06(80% and 20% pad)CNC and anodizing is completed 10.9
« Reply #259 on: Sun, 17 March 2019, 01:50:17 »
Yes R2 would be super.

Offline 6FeaT

  • Posts: 27
Re: 【GB】JER-A06(80% and 20% pad)CNC and anodizing is completed 10.9
« Reply #260 on: Mon, 01 April 2019, 06:39:54 »
I would be interested in a second round

Offline TheFreakOfSpeed

  • Posts: 3
  • Location: Australia
Re: 【GB】JER-A06(80% and 20% pad)CNC and anodizing is completed 10.9
« Reply #261 on: Mon, 24 June 2019, 21:57:34 »
Round2 ???

Online LightningXI

  • * Elevated Elder
  • Posts: 2735
  • Location: New York
  • PPD
    • ArtisanMacro
Re: 【GB】JER-A06(80% and 20% pad)CNC and anodizing is completed 10.9
« Reply #262 on: Mon, 24 June 2019, 22:35:41 »
Round2 ???

There's an IC for it. Check the Interest Checks thread. Someone should close this thread.
WANTED: Clacks, Artisans, Keysets, Vintage Cherry and Other Goodies

More
Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno