Author Topic: [GB] KIRA80 & KIRA S - cancelled, refunds in progress.  (Read 18157 times)

WhateverZYX and 3 Guests are viewing this topic.

Offline beamingrobot

  • * Vendor
  • Thread Starter
  • Posts: 449
  • monokei.us
[GB] KIRA80 & KIRA S - cancelled, refunds in progress.
« on: Fri, 29 June 2018, 11:12:05 »
Maybe another time.


(Previous OP text is hidden, not deleted)

More
Hi all,







This is the GB for the KIRA80 & KIRA S by thesiscamper, group buy will be done via monokei.us

1. KIRA80 (TKL):


  • Top piece
  • ANSI plate (no ISO option)
  • WKL/WK available (once winners have been announced)
  • PCB (mini USB)
  • Bottom piece
  • Brass weight (MATTE finish, K I R A)
  • typing angle is 8*
  • PCB by TGR Keyboards, bootmapper

Prices (USD):
  • $400 for one set (case, PCB, brass weight, aluminium plate) does not include shipping/fees.
  • $35 for additional brass switch plate
  • $25 for additional polycarbonate switch plate
  • $30 for additional aluminium switch plate
  • $60 for additional PCB

2. KIRA S (numpad):


  • Top piece
  • PCB (mini USB)
  • Bottom piece
  • Brass weight
  • typing angle is 8*
  • PCB by TGR Keyboards, bootmapper

Prices (USD):
  • $200 for one set (case, insert, PCB, brass weight, aluminium plate, Shopify fees), does not include shipping.
  • $70 for additional aluminium switch plate + PCB

Info:

  • GB limited to 50 sets each
  • TKL Plate supports varied bottom row (6.25u, 7u spacebars)


Additional pictures
https://imgur.com/a/52W8eL7



Shipping:

  • Shipping from Singapore.
  • Shipping cost will depend on location.
Estimated shipping cost (USD):
  • Singapore: $5
  • Malaysia: $20
  • Australia: $45
  • Korea: $27
  • USA: $62
  • Germany: $51

Payment:
  • Prices listed are in USD. Payment in SGD as the shop can only process in SGD, sorry :(
  • No PayPal invoice. All payment via Shopify payments so buyer protection still available
  • Shipping will be calculated once the orders are ready to go out, so you'll receive additional instructions then

Misc:

  • Deadline for raffle entry is 12am on 03 July 2018 (SGT, GMT+8).
  • Deadline for payment is 48 hours.
  • Countdown timer.
  • Raffle entries will be RNG-ed, and then you will receive an email regarding payment and other things.
  • For any changes to your order, please send a PM when necessary. Please note that this is a small buy and we will proceed with manufacturing very soon, so changes might disrupt the process.
  • Please include your order number when sending a PM for changes.
  • No refunds or transfer of spots once payment has gone through to the factory. These will be possible once we receive the items to minimize too many refunds/transfers/sales of spots that tend to happen

Production lead time:

This time around it should take about 4-5 months given that we have more units compared to previous GBs. Please be aware there will likely be long periods of time without any substantial updates from the factory other than "it's in production".


Order check:

https://docs.google.com/spreadsheets/d/1aJPiKcVXqn3kYnqi3HZB2s5vghpjEPG00ouqo0y4VCQ/edit?usp=sharing
« Last Edit: Wed, 25 July 2018, 09:08:48 by beamingrobot »
360c | Koala | Kmac 1.2 | TGR Jane | TGR 910 | Canoe | MIRA | Novatouch | KIRA60 | KIRA EXS | KIRA KN2 | Singa R1 | EXENT | HHKB Pro 2 | RF 104UK | RF87U | AEK II | VE.A

monokei

Offline beamingrobot

  • * Vendor
  • Thread Starter
  • Posts: 449
  • monokei.us
Re: [GB] KIRA80 & KIRA S
« Reply #1 on: Fri, 29 June 2018, 11:22:41 »
 :-X

More
Winners:

KIRA80 / KIRA S:

Coffeeshopcoder
bciamny
schlep
jshane
Leovan_13
sroop
kissingyou
niknok88
Hamel
OracleKev
CornCha0s
kevinlim02
Vincentalpha
stepstone82
spiritjeon
necromanx
foxmancore
random0987
bloznalisd
bminhz
forevermadrigal
jubjubcity
papedahut
Att1cus
NovaComet
Bubblegum
clasicks
eyedrop
//gainsborough
E3E
redbanshee
kokugatsu
Carlobv
jumpmineralwater
Rempired
elDuderino
etherealsound
ridiclewis
oHimari
koojahyung
razor_blade
mathleejj
yonghf
jaymaikan
NovaComet
SBN
Superdoedoe
olivia
Oblotzky
Jkush463

51-65:

OffbeatClacking
create_alt_delete
clik_clak
sparkle
azw898
vonswoopington
henz
apple8500
Jamps
mops
lsu1245
moonmembrane
AstralBandit

KIRA S only:

heycheeeno
Jimmare
Mikiberry
nulltorious
« Last Edit: Wed, 25 July 2018, 09:09:20 by beamingrobot »
360c | Koala | Kmac 1.2 | TGR Jane | TGR 910 | Canoe | MIRA | Novatouch | KIRA60 | KIRA EXS | KIRA KN2 | Singa R1 | EXENT | HHKB Pro 2 | RF 104UK | RF87U | AEK II | VE.A

monokei

Offline Photoelectric

  • * Administrator
  • Posts: 6568
Re: [GB] KIRA80 & KIRA S
« Reply #2 on: Fri, 29 June 2018, 23:21:00 »
Approval bump!  Good luck with the group buy!
For any group buy participants, please read through this post.
- Keyboards: LZ-GH (Jailhouse Blues)M65-a  ||  To be built: MIRA SE, E8-V1, MOON TKL
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline cijanzen

  • Posts: 61
Re: [GB] KIRA80 & KIRA S
« Reply #3 on: Fri, 29 June 2018, 23:27:54 »
Entry deadline date is wrong but otherwise looks good! Price is very reasonable imo and Im hoping to get in on this.


Sent from my iPhone using Tapatalk

Online vonswoopington

  • Posts: 32
Re: [GB] KIRA80 & KIRA S
« Reply #4 on: Fri, 29 June 2018, 23:29:11 »
Also the Google forms is not live yet.

Offline beamingrobot

  • * Vendor
  • Thread Starter
  • Posts: 449
  • monokei.us
Re: [GB] KIRA80 & KIRA S
« Reply #5 on: Fri, 29 June 2018, 23:32:46 »
Entry deadline date is wrong but otherwise looks good! Price is very reasonable imo and Im hoping to get in on this.


Sent from my iPhone using Tapatalk

Fixed!

Also the Google forms is not live yet.

Just approved it, was working with GH mods to resolve some stuff but it should be good to go  :thumb:
360c | Koala | Kmac 1.2 | TGR Jane | TGR 910 | Canoe | MIRA | Novatouch | KIRA60 | KIRA EXS | KIRA KN2 | Singa R1 | EXENT | HHKB Pro 2 | RF 104UK | RF87U | AEK II | VE.A

monokei

Offline hayt

  • Formerly haytorious
  • * Maker
  • Posts: 402
  • Location: Atlanta
    • Wish List
Re: [GB] KIRA80 & KIRA S
« Reply #6 on: Fri, 29 June 2018, 23:38:25 »
Lovely design, glwb!

Online vonswoopington

  • Posts: 32
Re: [GB] KIRA80 & KIRA S
« Reply #7 on: Fri, 29 June 2018, 23:39:41 »
Awesome thanks! Is there a link to see what the other color combinations look like?

Online att1cus

  • * Maker
  • Posts: 160
  • Location: USA - Philadelphia
Re: [GB] KIRA80 & KIRA S
« Reply #8 on: Fri, 29 June 2018, 23:45:58 »
Cannot wait! Fingers crossed!  :thumb: :thumb: :thumb:

Online spiritjeon

  • Posts: 21
Re: [GB] KIRA80 & KIRA S
« Reply #9 on: Fri, 29 June 2018, 23:58:13 »
Confirmed! Cross my fingers. XD

Offline AstralBandit

  • Posts: 6
Re: [GB] KIRA80 & KIRA S
« Reply #10 on: Sat, 30 June 2018, 00:01:53 »
RNGESUS PLS


Sent from my iPhone using Tapatalk

Online foxmancore

  • Posts: 60
  • Location: Tokyo
Re: [GB] KIRA80 & KIRA S
« Reply #11 on: Sat, 30 June 2018, 00:26:51 »
submitted the form. Gl everyone! :D

Offline YisSerL

  • Posts: 36
Re: [GB] KIRA80 & KIRA S
« Reply #12 on: Sat, 30 June 2018, 01:01:24 »
beamingrobot, any pics showing the brass KIRA weight?

I loved the design, hopefully I'll be picked.  Crossing my toes, leaving my fingers so I can keep clacking!   :p

Online bciamny

  • Posts: 141
Re: [GB] KIRA80 & KIRA S
« Reply #13 on: Sat, 30 June 2018, 01:51:14 »
a few questions as i made it through the form: 1) could only select color options/build parts for the tkl even though i'd potentially like both 2) any chance to sub the aluminum plate for either the pc or brass plate? 3) is it possible to change color choices shortly after the winners announced? a lot more color options presented than expected (and it'd be cool to see it listed in the gb op) 4) will there be an option to select wkl at some point?

thanks :)
« Last Edit: Sat, 30 June 2018, 01:53:15 by bciamny »

Offline beamingrobot

  • * Vendor
  • Thread Starter
  • Posts: 449
  • monokei.us
Re: [GB] KIRA80 & KIRA S
« Reply #14 on: Sat, 30 June 2018, 02:02:07 »
a few questions as i made it through the form: 1) could only select color options/build parts for the tkl even though i'd potentially like both 2) any chance to sub the aluminum plate for either the pc or brass plate? 3) is it possible to change color choices shortly after the winners announced? a lot more color options presented than expected (and it'd be cool to see it listed in the gb op) 4) will there be an option to select wkl at some point?

thanks :)

1) You should be able to choose the option for both numpad and TKL at the start, lemme know if it doesn't work.
2) nope
3) yes, i'll confirm your orders again
4) yes, after we determine the winners you'll get to select WKL/WK
360c | Koala | Kmac 1.2 | TGR Jane | TGR 910 | Canoe | MIRA | Novatouch | KIRA60 | KIRA EXS | KIRA KN2 | Singa R1 | EXENT | HHKB Pro 2 | RF 104UK | RF87U | AEK II | VE.A

monokei

Online bciamny

  • Posts: 141
Re: [GB] KIRA80 & KIRA S
« Reply #15 on: Sat, 30 June 2018, 02:06:05 »
a few questions as i made it through the form: 1) could only select color options/build parts for the tkl even though i'd potentially like both 2) any chance to sub the aluminum plate for either the pc or brass plate? 3) is it possible to change color choices shortly after the winners announced? a lot more color options presented than expected (and it'd be cool to see it listed in the gb op) 4) will there be an option to select wkl at some point?

thanks :)

1) You should be able to choose the option for both numpad and TKL at the start, lemme know if it doesn't work.
2) nope
3) yes, i'll confirm your orders again
4) yes, after we determine the winners you'll get to select WKL/WK

as to 1) i could only choose options for the tkl even though i selected that i'd like to get both. i'm not sure if i'm doing something wrong though. thanks beamingrobot.

Offline beamingrobot

  • * Vendor
  • Thread Starter
  • Posts: 449
  • monokei.us
Re: [GB] KIRA80 & KIRA S
« Reply #16 on: Sat, 30 June 2018, 02:21:08 »
I've changed the form so it should work now, if it doesn't let me know again, thanks  :thumb:

KIRA TKL bottom/weight (thanks to Oblotzky): https://i.imgur.com/tMnXrrY.jpg

If anyone would like to change their options, you can submit a new one since we'll send a public doc with your choices before we lock in the orders. I'll refer to the latest form submission
« Last Edit: Sat, 30 June 2018, 02:24:42 by beamingrobot »
360c | Koala | Kmac 1.2 | TGR Jane | TGR 910 | Canoe | MIRA | Novatouch | KIRA60 | KIRA EXS | KIRA KN2 | Singa R1 | EXENT | HHKB Pro 2 | RF 104UK | RF87U | AEK II | VE.A

monokei

Online bciamny

  • Posts: 141
Re: [GB] KIRA80 & KIRA S
« Reply #17 on: Sat, 30 June 2018, 02:28:48 »
i feel slow. i can get through the two pages for the tkl options but then it goes to the submit page. first page -> username & email, second page -> choose whether you want the combo -> if yes, third page becomes color option page, fourth page becomes additional parts page and fifth page is the submit page [the end]. if no, you can choose either the tkl or the pad, and depending on which you select you get to the two option pages for each item respectively and then the submit page.

i think it should be that if you select yes there should be a fifth and sixth page for the options on the pad? or maybe one page for all the options.

Offline beamingrobot

  • * Vendor
  • Thread Starter
  • Posts: 449
  • monokei.us
Re: [GB] KIRA80 & KIRA S
« Reply #18 on: Sat, 30 June 2018, 02:46:13 »
I've split both numpad and TKL into separate forms, since Google form is sending options all over the place and I'm not sure why.

KIRA80: https://goo.gl/forms/QgnDmOb5UC3v2KLQ2

KIRA S: https://goo.gl/forms/jAp4X6mqymfMZ4sr1

« Last Edit: Sat, 30 June 2018, 02:52:36 by beamingrobot »
360c | Koala | Kmac 1.2 | TGR Jane | TGR 910 | Canoe | MIRA | Novatouch | KIRA60 | KIRA EXS | KIRA KN2 | Singa R1 | EXENT | HHKB Pro 2 | RF 104UK | RF87U | AEK II | VE.A

monokei

Online vonswoopington

  • Posts: 32
Re: [GB] KIRA80 & KIRA S
« Reply #19 on: Sat, 30 June 2018, 02:57:06 »
I've split both numpad and TKL into separate forms, since Google form is sending options all over the place and I'm not sure why.

KIRA80: https://goo.gl/forms/QgnDmOb5UC3v2KLQ2

KIRA S: https://goo.gl/forms/jAp4X6mqymfMZ4sr1

Do we need to resubmit if we used the old form?

Offline beamingrobot

  • * Vendor
  • Thread Starter
  • Posts: 449
  • monokei.us
Re: [GB] KIRA80 & KIRA S
« Reply #20 on: Sat, 30 June 2018, 03:03:11 »
I've split both numpad and TKL into separate forms, since Google form is sending options all over the place and I'm not sure why.

KIRA80: https://goo.gl/forms/QgnDmOb5UC3v2KLQ2

KIRA S: https://goo.gl/forms/jAp4X6mqymfMZ4sr1

Do we need to resubmit if we used the old form?

The data is still there so there's no need, but if you want to it's fine, I'll just look at the latest submission.
360c | Koala | Kmac 1.2 | TGR Jane | TGR 910 | Canoe | MIRA | Novatouch | KIRA60 | KIRA EXS | KIRA KN2 | Singa R1 | EXENT | HHKB Pro 2 | RF 104UK | RF87U | AEK II | VE.A

monokei

Offline gutsack

  • Posts: 158
Re: [GB] KIRA80 & KIRA S
« Reply #21 on: Sat, 30 June 2018, 03:12:30 »
Entered. Good luck, all.

Offline coffeeshopcoder

  • Posts: 64
  • Location: California
Re: [GB] KIRA80 & KIRA S
« Reply #22 on: Sat, 30 June 2018, 03:57:54 »
Any pictures of the purple one ?
Is the red same as the Kira 60 red ?

Offline Hamel

  • Posts: 47
  • Location: Seoul, South Korea
  • KBDLAB
Re: [GB] KIRA80 & KIRA S
« Reply #23 on: Sat, 30 June 2018, 04:08:08 »
Question regarding the switch direction in the pcb.
Which direction will the LED slot in the switch housing be facing; north or south?

나의 SM-G950N 의 Tapatalk에서 보냄


Offline random0987

  • Posts: 18
Re: [GB] KIRA80 & KIRA S
« Reply #24 on: Sat, 30 June 2018, 07:50:17 »
Any images of how the top and bottom pieces fit together for each the 80 and S? Im curious what they would look like with different top and bottom colors; although I think we determined in a prior post that this was not an aesthetically pleasing option for this board. Thanks!

Offline Create_alt_delete

  • Posts: 16
  • Location: Georgia, USA
Re: [GB] KIRA80 & KIRA S
« Reply #25 on: Sat, 30 June 2018, 08:53:28 »
First time trying a raffle. I'll keep my fingers crossed until the winners are announced.

Offline Jkush463

  • Posts: 76
  • Location: Aurora, IL
Re: [GB] KIRA80 & KIRA S
« Reply #26 on: Sat, 30 June 2018, 09:06:33 »
got an entry in hope i get one.

Offline Mearaz

  • Posts: 16
Re: [GB] KIRA80 & KIRA S
« Reply #27 on: Sat, 30 June 2018, 09:14:24 »
Is the Kira80 in the picture silver or space grey? looks like grey to me . First raffle, hope to get in.

Online att1cus

  • * Maker
  • Posts: 160
  • Location: USA - Philadelphia
Re: [GB] KIRA80 & KIRA S
« Reply #28 on: Sat, 30 June 2018, 09:17:31 »
Is the Kira80 in the picture silver or space grey? looks like grey to me . First raffle, hope to get in.

Yeah it's the grey.

Offline Oblotzky

  • Posts: 1088
  • Location: Cologne, Germany
  • Buy more Round 7.
    • Get yours here!
Re: [GB] KIRA80 & KIRA S
« Reply #29 on: Sat, 30 June 2018, 09:47:19 »
Is the Kira80 in the picture silver or space grey? looks like grey to me . First raffle, hope to get in.

Yeah it's the grey.

The "additional pictures" album linked in OP is titled Space Grey

Offline Puddsy

  • Baseball Dad
  • * Exalted Elder
  • Posts: 8966
  • Location: North of the Mason-Dixon
  • Clockmaker
Re: [GB] KIRA80 & KIRA S
« Reply #30 on: Sat, 30 June 2018, 10:04:44 »
this is good ****

GLWGB

entry submitted
QFR | MJ2 TKL | "Schumiboard" | "Bulgogiboard" (Keycon 104) | MIRA SE | Weaven (MOD-M) | TGR Alice (when it ships) | MEME | Keycult No 1 (when it ships) | Southpaw Fullsize (when it ships)

has puddsy gotten an award for person most involved with things hes not involved in at all, yet?

Offline Bubblegum

  • Posts: 34
  • Location: Swede in Norway
Re: [GB] KIRA80 & KIRA S
« Reply #31 on: Sat, 30 June 2018, 10:10:53 »
Good luck everyone! :)

Offline Photoelectric

  • * Administrator
  • Posts: 6568
Re: [GB] KIRA80 & KIRA S
« Reply #32 on: Sat, 30 June 2018, 10:11:12 »
I love this case, the side facets are beautiful.
- Keyboards: LZ-GH (Jailhouse Blues)M65-a  ||  To be built: MIRA SE, E8-V1, MOON TKL
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline MightyFineShindig

  • Posts: 8
  • Location: Melbourne, Australia
Re: [GB] KIRA80 & KIRA S
« Reply #33 on: Sat, 30 June 2018, 19:53:09 »
Entered!

Good luck to everyone  :D
Ducky One > DZ60 > KBD75 > Canoe > MxSS > M60-A > TX87se > ?

Offline E3E

  • Posts: 2818
  • Location: New Orleans
  • Alps Evangelist
Re: [GB] KIRA80 & KIRA S
« Reply #34 on: Sat, 30 June 2018, 19:59:35 »
Any images of how the top and bottom pieces fit together for each the 80 and S? I’m curious what they would look like with different top and bottom colors; although I think we determined in a prior post that this was not an aesthetically pleasing option for this board. Thanks!

If you look closely, you can see the seam between the two halves in the profile shot of the board. You can also see it in the CNC drawing of the S.

Offline superdoedoe

  • Posts: 234
  • Location: Straya
  • ( ͡ ͜ʖ ͡)
Re: [GB] KIRA80 & KIRA S
« Reply #35 on: Sun, 01 July 2018, 01:23:26 »
If I were to get it I wouldn't want to get both an alu plate and a brass plate? No Chance for just a brass plate?

Also Found this pic on ThesisCampers Instagram

https://www.instagram.com/p/BjXco0FDVUZsmRkUvj7QwQ_OD5lkxR-ii2gSBw0/?taken-by=thesiscamper
« Last Edit: Sun, 01 July 2018, 01:26:05 by superdoedoe »
( ͡ ͜ʖ ͡)

Offline evoluchanel

  • Posts: 3
  • Location: Fresno, CA
Re: [GB] KIRA80 & KIRA S
« Reply #36 on: Sun, 01 July 2018, 01:29:16 »
Entered! Good luck everyone (:

Offline schlep

  • Posts: 22
Re: [GB] KIRA80 & KIRA S
« Reply #37 on: Sun, 01 July 2018, 04:52:39 »
3rd July is deadline for submission of names. When do we know who got the spot?

Offline kokugatsu

  • Posts: 28
Re: [GB] KIRA80 & KIRA S
« Reply #38 on: Sun, 01 July 2018, 07:45:51 »
Submitted, took a while to decide colours. GL everyone.

Offline beamingrobot

  • * Vendor
  • Thread Starter
  • Posts: 449
  • monokei.us
Re: [GB] KIRA80 & KIRA S
« Reply #39 on: Sun, 01 July 2018, 08:05:03 »
If I were to get it I wouldn't want to get both an alu plate and a brass plate? No Chance for just a brass plate?

Also Found this pic on ThesisCampers Instagram

https://www.instagram.com/p/BjXco0FDVUZsmRkUvj7QwQ_OD5lkxR-ii2gSBw0/?taken-by=thesiscamper

Yea no chance for that, the price of the whole TKL set depends on 50 units of the same thing :)

Question regarding the switch direction in the pcb.
Which direction will the LED slot in the switch housing be facing; north or south?

나의 SM-G950N 의 Tapatalk에서 보냄



South
360c | Koala | Kmac 1.2 | TGR Jane | TGR 910 | Canoe | MIRA | Novatouch | KIRA60 | KIRA EXS | KIRA KN2 | Singa R1 | EXENT | HHKB Pro 2 | RF 104UK | RF87U | AEK II | VE.A

monokei

Offline Hamel

  • Posts: 47
  • Location: Seoul, South Korea
  • KBDLAB
Re: [GB] KIRA80 & KIRA S
« Reply #40 on: Sun, 01 July 2018, 08:13:04 »

Question regarding the switch direction in the pcb.
Which direction will the LED slot in the switch housing be facing; north or south?

나의 SM-G950N 의 Tapatalk에서 보냄


South

Thanks for the answer mate, in for the raffle.

나의 SM-G950N 의 Tapatalk에서 보냄

« Last Edit: Sun, 01 July 2018, 08:14:38 by Hamel »

Offline Jimmare

  • Posts: 13
Re: [GB] KIRA80 & KIRA S
« Reply #41 on: Sun, 01 July 2018, 08:25:45 »
What about people inside europe but not in germany?

Offline Puddsy

  • Baseball Dad
  • * Exalted Elder
  • Posts: 8966
  • Location: North of the Mason-Dixon
  • Clockmaker
Re: [GB] KIRA80 & KIRA S
« Reply #42 on: Sun, 01 July 2018, 09:18:30 »
3rd July is deadline for submission of names. When do we know who got the spot?

day or 2 after
QFR | MJ2 TKL | "Schumiboard" | "Bulgogiboard" (Keycon 104) | MIRA SE | Weaven (MOD-M) | TGR Alice (when it ships) | MEME | Keycult No 1 (when it ships) | Southpaw Fullsize (when it ships)

has puddsy gotten an award for person most involved with things hes not involved in at all, yet?

Offline Etherealsound

  • Posts: 122
  • Location: Madison, WI
Re: [GB] KIRA80 & KIRA S
« Reply #43 on: Sun, 01 July 2018, 09:29:04 »
Will there be a possibility of having a brass/poly plate in lieu of alu?

Offline Puddsy

  • Baseball Dad
  • * Exalted Elder
  • Posts: 8966
  • Location: North of the Mason-Dixon
  • Clockmaker
Re: [GB] KIRA80 & KIRA S
« Reply #44 on: Sun, 01 July 2018, 09:43:37 »
Will there be a possibility of having a brass/poly plate in lieu of alu?

no

he said above
QFR | MJ2 TKL | "Schumiboard" | "Bulgogiboard" (Keycon 104) | MIRA SE | Weaven (MOD-M) | TGR Alice (when it ships) | MEME | Keycult No 1 (when it ships) | Southpaw Fullsize (when it ships)

has puddsy gotten an award for person most involved with things hes not involved in at all, yet?

Offline Etherealsound

  • Posts: 122
  • Location: Madison, WI
Re: [GB] KIRA80 & KIRA S
« Reply #45 on: Sun, 01 July 2018, 11:24:24 »
Will there be a possibility of having a brass/poly plate in lieu of alu?

no

he said above

mb, dunno how I missed that. Also, resubmitted because I realized I might have put in the wrong username.
I don't suppose there will be color samples other than the space grey?
« Last Edit: Sun, 01 July 2018, 11:29:23 by Etherealsound »

Offline superdoedoe

  • Posts: 234
  • Location: Straya
  • ( ͡ ͜ʖ ͡)
Re: [GB] KIRA80 & KIRA S
« Reply #46 on: Sun, 01 July 2018, 18:24:23 »
Will there be a possibility of having a brass/poly plate in lieu of alu?

no

he said above

mb, dunno how I missed that. Also, resubmitted because I realized I might have put in the wrong username.
I don't suppose there will be color samples other than the space grey?

He said it's the same place as their other keyboards they've done so it should be pretty much identical colour wise to those.
( ͡ ͜ʖ ͡)

Offline talifern

  • Posts: 2
Re: [GB] KIRA80 & KIRA S
« Reply #47 on: Sun, 01 July 2018, 18:46:49 »
Entered, thanks!

Online att1cus

  • * Maker
  • Posts: 160
  • Location: USA - Philadelphia
Re: [GB] KIRA80 & KIRA S
« Reply #48 on: Sun, 01 July 2018, 21:11:00 »
Re-thought my original color choices and submitted a new entry for Kira80.  Hope that's okay!

Offline //gainsborough

  • Posts: 34
  • Location: Oregon
  • ALPSの日常
Re: [GB] KIRA80 & KIRA S
« Reply #49 on: Mon, 02 July 2018, 10:06:54 »
Less than an hour!