Author Topic: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!  (Read 16387 times)

0 Members and 2 Guests are viewing this topic.

Offline gridishere

  • Thread Starter
  • Posts: 26
  • Location: Shanghai
Here's the prototype!

201072-0201074-1201076-2
201084-3201080-4201082-5
201078-6201086-7

201088-8


The fine grit bead-blasting results in a very smooth finish ;) The "PEAKS" looks absolutely fantastic! And I am very satisfied with that!

As you can see, I also have a prototype for the "PRESS". PCB still needs more work, but it's a fun little project and it will certainly have ALPS support for those who love ALPS!

Don't for get to cast your vote in the poll VOTE HERE



Hi guys,

It's been a while :) The prototype took longer than I expected, but they just arrived! I will take some photos later today. Let's wait and see!

In the mean time, I have created a Google form where you can vote for the top pieces you prefer!

VOTE HERE

I also did more renders with GMK Violet Tendencies, enjoy!

200999-10
201001-11


Hi buddy, grid is here.

199835-12
199837-13

Last week I put a rendering of grid 600, a keyboard chassis for GH60 enthusiasts, on reddit.(
https://www.reddit.com/r/MechanicalKeyboards/comments/8waqh3/ic_grid_600_a_chassis_with_interchangeable_pieces/ )

After collecting some feedbacks and suggestions, I assume it is the right time for some updates.

grid 600 Specs:
   1. Keyboard chassis based on GH60
   2. Supports tray-mount PCB, not compatible with IKBC Poker II and GK64.
   3. Has a battery compartment (96x50x3 mm)
   4. 5.5į fixed angle
   5. Aluminum parts will be bead-blasted with fine grit.
   6. Interchangeable cover modules
   

Cover Modules:
   1. Type 01 "CLASSIC" : A regular, "Model F"-inspired flat top.
199839-14199851-15

   2. Type 02 "NEON" : Type 01 with 3 self-luminous tritium vials. (Red, Green, Blue)
199837-16

   3. Type 03 "PEAKS" : Form inspired by mountains.
199841-17199849-18

   4. Type 04 "FLASH" : Flat top with programmable RGB lighting.
199843-19

   5. Type 05 "PRESS" : With 4 extra programmable Keys. (Left)
199845-20

   6. Type 06 "PAPER": With a 2inch E-ink Paper. (Raspberry Pi Zero would fit in)
199847-21

Thanks to u/CubbyNINJA for the micropad idea.
Thanks to u/3NJV2 for the 8 bit graphics concept, unfortunately that won't happen but hope the E-ink paper isn't that bad.

Ideas of green cover modules with GMK Terminal by TheKey.Company comes for u/postollagenovese.

I am grateful to all your comments.
« Last Edit: Tue, 31 July 2018, 00:24:25 by gridishere »

Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 4807
  • Location: United Kingdom
Re: [IC] grid 600, a chassis w/ interchangeable pieces for GH60 PCBs
« Reply #1 on: Wed, 11 July 2018, 11:23:45 »
Looks interesting, any idea on price?

Offline fcoury

  • Posts: 53
  • Location: Brazil
Re: [IC] grid 600, a chassis w/ interchangeable pieces for GH60 PCBs
« Reply #2 on: Wed, 11 July 2018, 11:40:56 »
I think it's a great concept for sure. I am assuming it will be compatible with the standard 60% not listed as incompatible like dz60 or zeal60 right?

Offline gridishere

  • Thread Starter
  • Posts: 26
  • Location: Shanghai
Re: [IC] grid 600, a chassis w/ interchangeable pieces for GH60 PCBs
« Reply #3 on: Wed, 11 July 2018, 12:09:50 »
Looks interesting, any idea on price?

Pricing is not available at the moment. I hope to keep the pricing in an affordable range, sub $150 for Type 01 Classic.

Offline gridishere

  • Thread Starter
  • Posts: 26
  • Location: Shanghai
Re: [IC] grid 600, a chassis w/ interchangeable pieces for GH60 PCBs
« Reply #4 on: Wed, 11 July 2018, 12:10:44 »
I think it's a great concept for sure. I am assuming it will be compatible with the standard 60% not listed as incompatible like dz60 or zeal60 right?

As long as they have the same screw mounts, yes :)

Offline beekey

  • Posts: 173
Re: [IC] grid 600, a chassis w/ interchangeable pieces for GH60 PCBs
« Reply #5 on: Wed, 11 July 2018, 12:44:12 »
Wow, this look nice. Great idea!

Online cldskt

  • Posts: 172
  • Location: Rabbithole
  • Wallet and hobby aren't friends
Re: [IC] grid 600, a chassis w/ interchangeable pieces for GH60 PCBs
« Reply #6 on: Wed, 11 July 2018, 12:51:19 »
Looks interesting, any idea on price?

Pricing is not available at the moment. I hope to keep the pricing in an affordable range, sub $150 for Type 01 Classic.

Price goal sounds appealing. Any colors in mind to be offered?


"Addiction is buying the things that I don't need with the money I don't have." - me
"Spending $500 on your first custom is justified." - also me

Offline gridishere

  • Thread Starter
  • Posts: 26
  • Location: Shanghai
Re: [IC] grid 600, a chassis w/ interchangeable pieces for GH60 PCBs
« Reply #7 on: Thu, 12 July 2018, 02:35:37 »
Looks interesting, any idea on price?

Pricing is not available at the moment. I hope to keep the pricing in an affordable range, sub $150 for Type 01 Classic.

Price goal sounds appealing. Any colors in mind to be offered?

A prototype has been ordered, I am trying different colors on cover modules. Will see how that turn out :)

Offline _ODIN_

  • Posts: 517
  • Location: Valhalla
  • Figth for honor!
Re: [IC] grid 600, a chassis w/ interchangeable pieces for GH60 PCBs
« Reply #8 on: Thu, 12 July 2018, 04:14:03 »
interested


Offline SteffeMK

  • Posts: 42
Re: [IC] grid 600, a chassis w/ interchangeable pieces for GH60 PCBs
« Reply #9 on: Thu, 12 July 2018, 04:53:02 »
The 02 neon looks really nice, got any approximate price on that version?

Online slxdegrees

  • Posts: 111
  • Location: Kerning City
  • i write nice things to make people buy stuff
Re: [IC] grid 600, a chassis w/ interchangeable pieces for GH60 PCBs
« Reply #10 on: Thu, 12 July 2018, 07:52:17 »
That's a lot of versions... I'm assuming not all will make it to production?

Sent from my LG-H990 using Tapatalk


Offline sheepish.alpaca

  • Posts: 14
Re: [IC] grid 600, a chassis w/ interchangeable pieces for GH60 PCBs
« Reply #11 on: Fri, 13 July 2018, 02:12:09 »
I'm interested in the Peaks version - would fit well with both Laser and Violet Tendencies, unless I'm mistaken.

Will need a price though - I've been rather hard on my wallet lately.  :-[

Offline gridishere

  • Thread Starter
  • Posts: 26
  • Location: Shanghai
Re: [IC] grid 600, a chassis w/ interchangeable pieces for GH60 PCBs
« Reply #12 on: Mon, 16 July 2018, 07:34:41 »
Expecting a prototype this week :) Hyped!

Offline beekey

  • Posts: 173
Re: [IC] grid 600, a chassis w/ interchangeable pieces for GH60 PCBs
« Reply #13 on: Mon, 16 July 2018, 10:46:11 »
Type 01 or 02 would be nice. Cool ideas. I hope this becomes reality and ist affordable.

Offline glubazoid

  • Posts: 89
  • Location: Los Angeles, CA
Re: [IC] grid 600, a chassis w/ interchangeable pieces for GH60 PCBs
« Reply #14 on: Mon, 16 July 2018, 23:45:32 »
This is exciting! Love that top bezel

Offline teobeo94

  • Posts: 6
  • Location: CA
Re: [IC] grid 600, a chassis w/ interchangeable pieces for GH60 PCBs
« Reply #15 on: Thu, 19 July 2018, 11:51:21 »
A white color will be great if possible!

Offline bball2

  • Posts: 120
Re: [IC] grid 600, a chassis w/ interchangeable pieces for GH60 PCBs
« Reply #16 on: Thu, 19 July 2018, 14:19:16 »
Would probably be a bit more expensive, but blockers integrated into the top of the case are so much nicer than individual recessed ones.

Offline gridishere

  • Thread Starter
  • Posts: 26
  • Location: Shanghai
Re: [IC] grid 600, a chassis w/ interchangeable pieces for GH60 PCBs
« Reply #17 on: Mon, 30 July 2018, 02:13:27 »
A white color will be great if possible!

Yes, there will be a white one!

Offline gridishere

  • Thread Starter
  • Posts: 26
  • Location: Shanghai
Updates! Also, prototype just arrive and I will take some pictures later today!

Offline gridishere

  • Thread Starter
  • Posts: 26
  • Location: Shanghai
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #19 on: Tue, 31 July 2018, 00:25:14 »
Updated photos for the prototype, tell me what you think :)

Online slxdegrees

  • Posts: 111
  • Location: Kerning City
  • i write nice things to make people buy stuff
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #20 on: Tue, 31 July 2018, 00:47:21 »
Will the PCB support Kailh hotswap sockets?

Offline wowremy

  • Posts: 93
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #21 on: Tue, 31 July 2018, 04:21:15 »
This is the sexiest keyboard ive seen since CA66. Maybe im a sucker for those rounded sides.

Offline Meowsaur

  • Posts: 21
  • Location: England (South)
  • I don't like that.
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #22 on: Tue, 31 July 2018, 19:56:35 »
Immediately drawn to the peaks & their interchangeable nature.
Would look fantastic in gunmetal grey and/or white pearl (I'm a fan of mute colours).

How much does the prototype weigh?

Offline gridishere

  • Thread Starter
  • Posts: 26
  • Location: Shanghai
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #23 on: Tue, 31 July 2018, 22:31:13 »
Will the PCB support Kailh hotswap sockets?

If you are mentioning the small PCB for the "PRESS", no. But since this is a chassis design, you will be able to use hot swappable 60% PCB on to it.

I don't currently have plans for making the PCB for the "PRESS" hot swappable because it will be mx/alps dual support and will not have a plate to secure the switches. However, if there are enough interest, I will offer extra PCBs.

Offline gridishere

  • Thread Starter
  • Posts: 26
  • Location: Shanghai
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #24 on: Tue, 31 July 2018, 22:31:35 »
This is the sexiest keyboard ive seen since CA66. Maybe im a sucker for those rounded sides.

Thank you!!

Offline gridishere

  • Thread Starter
  • Posts: 26
  • Location: Shanghai
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #25 on: Tue, 31 July 2018, 22:37:20 »
Immediately drawn to the peaks & their interchangeable nature.
Would look fantastic in gunmetal grey and/or white pearl (I'm a fan of mute colours).

How much does the prototype weigh?

Thank you :)! I don't have a proper weight to weigh it, but will do that soon.

Offline Corgiattackkk

  • Posts: 77
  • Location: Antarctica
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #26 on: Tue, 31 July 2018, 22:40:01 »
The prototype looks so sleek! Interested in purchase for white with reasonable price point  ;)

Offline switchnollie

  • sleever supreme
  • * Exquisite Elder
  • Posts: 1167
  • Location: グレイハット
  • boi oh boi
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #27 on: Tue, 31 July 2018, 22:56:59 »
that overwatch menu background lookin ass top piece is sweet.

really interested in this one, very unique :thumb:

Offline gutsack

  • Posts: 181
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #28 on: Wed, 01 August 2018, 03:14:58 »
Wow, prototype looks terrific.

Offline Zeroblade

  • Posts: 47
  • Location: Philippines
    • Twitter
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #29 on: Wed, 01 August 2018, 11:47:45 »
That e-ink paper panel... Very neat idea.

Offline gridishere

  • Thread Starter
  • Posts: 26
  • Location: Shanghai
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #30 on: Wed, 01 August 2018, 22:31:41 »
That e-ink paper panel... Very neat idea.

The idea came from a reddit user :) all credits to him! However, the e-ink paper module may not be available for now as I will need to run more test on it.

Offline coffeeshopcoder

  • Posts: 227
  • Location: California
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #31 on: Wed, 01 August 2018, 23:54:43 »
This was  .. meh - gimmicky ... at first.. now looking at the prototype, I have to say, this is an InstaBuy for me... Hopefully this wont be a  limited production run....

Will I be able to buy multiple top modules ? Like multiple colors and different modules ?


Offline ThomasTH

  • Posts: 46
  • Location: Thailand
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #32 on: Thu, 02 August 2018, 00:25:33 »
I am also in if its possible to buy different tops in different colors.

Offline gridishere

  • Thread Starter
  • Posts: 26
  • Location: Shanghai
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #33 on: Thu, 02 August 2018, 00:33:46 »
This was  .. meh - gimmicky ... at first.. now looking at the prototype, I have to say, this is an InstaBuy for me... Hopefully this wont be a  limited production run....

Will I be able to buy multiple top modules ? Like multiple colors and different modules ?

No, this won't be a limited run :) and yes, you will be able to have different tops in different colors for sure! And I am planning to offer 3-4 colors for the top piece

Offline gridishere

  • Thread Starter
  • Posts: 26
  • Location: Shanghai
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #34 on: Thu, 02 August 2018, 00:34:42 »
I am also in if its possible to buy different tops in different colors.

Yes, you will be able to do that!

Offline ErgoMacros

  • Posts: 202
  • Location: SF Bay Area
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #35 on: Thu, 02 August 2018, 01:11:51 »
Liking a lot of things about this.
Looks like the e-paper version will be it's own USB device, so the host OS CPU will control it?
(or will the keyboard controller be able to address it directly?)

Hope this is a resounding, wonderful success!
Today's quote: '...ďbut then the customer successfully broke that.Ē

Offline Draic

  • Posts: 82
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #36 on: Thu, 02 August 2018, 11:25:35 »
Can I use USB-C PCBs? Will there be no problems with USB-C to C?

Offline petamva

  • Posts: 27
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #37 on: Thu, 02 August 2018, 14:17:56 »
This looks pretty interesting... Weight? Pcb compatibility?

Offline Jkush463

  • Posts: 290
  • Location: Aurora, IL
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #38 on: Thu, 02 August 2018, 18:52:32 »
this is great would love to get one when the time comes for the GB!

Offline Combonaut

  • Posts: 7
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #39 on: Fri, 03 August 2018, 00:48:27 »
These look amazing!
Would be very interested in peaks and an RBG strip!
Some of the pics show a rose gold champagne colour, if that was available, it would be an instant buy for me.
Love your work.

Offline s1in8er

  • Posts: 1
  • Location: Taiwan
    • kevldesign
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #40 on: Fri, 03 August 2018, 10:33:10 »
The prototype is stunning, really love the peaks and its blue (green?) color.

Btw, i am a bit curious about how you manage to build the surface of the chassis's side.
Is it likes the pic 1 or 2 below.
201325-0201327-1

Offline gridishere

  • Thread Starter
  • Posts: 26
  • Location: Shanghai
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #41 on: Sat, 04 August 2018, 00:09:41 »
Liking a lot of things about this.
Looks like the e-paper version will be it's own USB device, so the host OS CPU will control it?
(or will the keyboard controller be able to address it directly?)

Hope this is a resounding, wonderful success!

E-paper may not make it's appearance in the first launch I am afraid :( But I will put more work onto it and make it happen some time soon. It will be stellar to control it via the keyboard!

Offline gridishere

  • Thread Starter
  • Posts: 26
  • Location: Shanghai
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #42 on: Sat, 04 August 2018, 00:13:29 »
Can I use USB-C PCBs? Will there be no problems with USB-C to C?

Hi Draic,

Sure yes you can use Type-C PCBs! It will have a PCB daughter board and internal adapter cables, so mini/micro/c should all work.

Offline gridishere

  • Thread Starter
  • Posts: 26
  • Location: Shanghai
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #43 on: Sat, 04 August 2018, 00:28:21 »
This looks pretty interesting... Weight? Pcb compatibility?

This is not a heavy board as it has many cutouts to make room for the components for the top module pieces, weighting ~1.7kg with the bottom chassis + the PEAKS and without PCB, switches and keycaps on.

However, it will have custom rubber feet to secure it on the desktop. And will certainly explore more materials for the top piece in the future if things go well! Some might add heft and some might add functionality.

Most 60% PCBs will work! GH60, XD60, DZ60 all work fine! And I believe with some modifications, XD75RE will also work. It also has a battery compartment, so it should also support some bluetooth 60% PCBs.

Offline gridishere

  • Thread Starter
  • Posts: 26
  • Location: Shanghai
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #44 on: Sat, 04 August 2018, 00:30:09 »
this is great would love to get one when the time comes for the GB!

It's happening soon! Looking forward to have it open for GB next Monday :)

Offline gridishere

  • Thread Starter
  • Posts: 26
  • Location: Shanghai
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #45 on: Sat, 04 August 2018, 00:34:15 »
These look amazing!
Would be very interested in peaks and an RBG strip!
Some of the pics show a rose gold champagne colour, if that was available, it would be an instant buy for me.
Love your work.

Thank you! Yes I will offer rose gold for the top pieces

Online parityb1t

  • Posts: 77
  • Location: England
  • 60% or less \m/
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #46 on: Sat, 04 August 2018, 05:28:22 »
Whats the final estimate price for classic?
Alps64 w/ Orange Alps | SatanGH60 Gartistotles

Offline Combonaut

  • Posts: 7
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #47 on: Sat, 04 August 2018, 06:17:54 »
These look amazing!
Would be very interested in peaks and an RBG strip!
Some of the pics show a rose gold champagne colour, if that was available, it would be an instant buy for me.
Love your work.

Thank you! Yes I will offer rose gold for the top pieces

That's awesome, can't wait. I assume the base colours will be black and white?

Online Aerizu

  • Posts: 108
  • Location: Japan
  • Professional Lurker
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #48 on: Sat, 04 August 2018, 07:08:07 »
Looks interesting ;) Any information on layout support?

Offline gridishere

  • Thread Starter
  • Posts: 26
  • Location: Shanghai
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #49 on: Sat, 04 August 2018, 07:34:36 »
Looks interesting ;) Any information on layout support?

This will not come with a PCB, so you can have any layout as long as it's on a 60% PCB. I will also have blockers for WKL(1u*2) and HHKB(1.5u*2 and 2.5u*1) available.

Offline gridishere

  • Thread Starter
  • Posts: 26
  • Location: Shanghai
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #50 on: Sat, 04 August 2018, 07:51:26 »
Whats the final estimate price for classic?

The final and detailed pricing will be released soon. However, I am sad to say after factoring all the costs, it will be higher than what I originally estimated.

Offline gridishere

  • Thread Starter
  • Posts: 26
  • Location: Shanghai
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #51 on: Sat, 04 August 2018, 07:52:00 »
These look amazing!
Would be very interested in peaks and an RBG strip!
Some of the pics show a rose gold champagne colour, if that was available, it would be an instant buy for me.
Love your work.

Thank you! Yes I will offer rose gold for the top pieces

That's awesome, can't wait. I assume the base colours will be black and white?

Yes Black or White for the case

Online Aerizu

  • Posts: 108
  • Location: Japan
  • Professional Lurker
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #52 on: Sat, 04 August 2018, 08:00:24 »
Looks interesting ;) Any information on layout support?

This will not come with a PCB, so you can have any layout as long as it's on a 60% PCB. I will also have blockers for WKL(1u*2) and HHKB(1.5u*2 and 2.5u*1) available.

Oops, my bad. I didn't see that it was a tray-mount case. Thanks for the info!

Online slxdegrees

  • Posts: 111
  • Location: Kerning City
  • i write nice things to make people buy stuff
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #53 on: Sat, 04 August 2018, 08:24:34 »
Whats the final estimate price for classic?

The final and detailed pricing will be released soon. However, I am sad to say after factoring all the costs, it will be higher than what I originally estimated.
How much higher are we looking at here?

Offline oldcat

  • Posts: 1053
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #54 on: Mon, 06 August 2018, 22:12:43 »
very nice, very nice
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Online slxdegrees

  • Posts: 111
  • Location: Kerning City
  • i write nice things to make people buy stuff
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #55 on: Tue, 07 August 2018, 08:07:25 »
Oh, just realized there are no plates... Hmm that's quite a dealbreaker, and not quite sure how it escaped mention this entire thread... :eek: https://en.zfrontier.com/products/grid600
« Last Edit: Tue, 07 August 2018, 08:11:47 by slxdegrees »

Offline DasGnome

  • Posts: 95
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #56 on: Tue, 07 August 2018, 08:13:23 »
Oh, just realized there are no plates... Hmm that's quite a dealbreaker, and not quite sure how it escaped mention this entire thread... :eek: https://en.zfrontier.com/products/grid600

It's tray mount. You have to source your own plate + pcb.

Online slxdegrees

  • Posts: 111
  • Location: Kerning City
  • i write nice things to make people buy stuff
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #57 on: Tue, 07 August 2018, 08:14:30 »
Oh, just realized there are no plates... Hmm that's quite a dealbreaker, and not quite sure how it escaped mention this entire thread... :eek: https://en.zfrontier.com/products/grid600

It's tray mount. You have to source your own plate + pcb.

Oh, my bad then. And thanks for clearing that up!  :)
« Last Edit: Tue, 07 August 2018, 08:16:37 by slxdegrees »

Online cldskt

  • Posts: 172
  • Location: Rabbithole
  • Wallet and hobby aren't friends
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #58 on: Tue, 07 August 2018, 09:27:16 »
Do we have to hand-wire the module if we choose the "PRESS" option?


"Addiction is buying the things that I don't need with the money I don't have." - me
"Spending $500 on your first custom is justified." - also me

Offline jebbra

  • Posts: 506
  • Location: Indonesia
  • jebbra.net
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #59 on: Tue, 07 August 2018, 11:04:35 »
I'm sorry if I'm late but why the white top part isn't even an option  :'( an all-white Grid600 will be ultra neat!

Offline gridishere

  • Thread Starter
  • Posts: 26
  • Location: Shanghai
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #60 on: Wed, 08 August 2018, 23:29:48 »
Do we have to hand-wire the module if we choose the "PRESS" option?

NO, you don't need to hand wire it. PCB and cable are provided, all you need is to plug it into the hub.

Offline wowremy

  • Posts: 93
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #61 on: Thu, 09 August 2018, 20:51:51 »
Is there a photo of the purple ano we can expect?

edit: found it on the extra modules page on ZF.
« Last Edit: Fri, 24 August 2018, 15:05:08 by wowremy »

Offline coffeeshopcoder

  • Posts: 227
  • Location: California
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #62 on: Fri, 10 August 2018, 12:19:50 »
will the main housing and the modules be available in the same colors ? or is the main housing black/darkgrey/while and the modules purple/green/rose gold ?

Online slxdegrees

  • Posts: 111
  • Location: Kerning City
  • i write nice things to make people buy stuff
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #63 on: Fri, 10 August 2018, 12:43:43 »
will the main housing and the modules be available in the same colors ? or is the main housing black/darkgrey/while and the modules purple/green/rose gold ?
Gb is live on zfrontier. Check main post for link.

Offline coffeeshopcoder

  • Posts: 227
  • Location: California
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #64 on: Fri, 10 August 2018, 14:50:43 »
will the main housing and the modules be available in the same colors ? or is the main housing black/darkgrey/while and the modules purple/green/rose gold ?
Gb is live on zfrontier. Check main post for link.
Oh wow . I did not realize. Thanks !!! A pity that the e-ink display module did not make it !!!

Sent from my Nexus 6P using Tapatalk


Offline coffeeshopcoder

  • Posts: 227
  • Location: California
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #65 on: Fri, 10 August 2018, 22:36:12 »
Simple question - how does the plate fit in the case ?
Another person already asked this, and got an answer that its a standard 60% plate can be used and its tray mount. Thats great, my question is how exactly does it fit ?
As in, does one lower the pcb and plat directly from the top ? the bottom chassis seems to be a single piece ?
Also is the left and right side of the chassis hollow ?


Offline Darknight00z

  • Posts: 497
  • Location: UK
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #66 on: Thu, 23 August 2018, 10:15:15 »
Love this case, but unfortunately can't afford this at the moment. Will there be a r2 planned?

Offline gutsack

  • Posts: 181
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #67 on: Thu, 23 August 2018, 23:03:52 »
Finally placed an order. Went with Flash.

Online slxdegrees

  • Posts: 111
  • Location: Kerning City
  • i write nice things to make people buy stuff
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #68 on: Sun, 26 August 2018, 00:54:15 »
Uh I can't for the life of me figure out how the modules are changed. Does anyone here know?

Offline gridishere

  • Thread Starter
  • Posts: 26
  • Location: Shanghai
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #69 on: Thu, 30 August 2018, 21:44:48 »
Simple question - how does the plate fit in the case ?
Another person already asked this, and got an answer that its a standard 60% plate can be used and its tray mount. Thats great, my question is how exactly does it fit ?
As in, does one lower the pcb and plat directly from the top ? the bottom chassis seems to be a single piece ?
Also is the left and right side of the chassis hollow ?

The switches are secured by the plate and the plate is secured by the switches too :) The 4 sides of the plate should be flush with the PCB, so you could simply put the assembled PCB and Plate into the chassis and then secure the PCB from moving by screws.

And no, the left and right sides of the chassis are solid.

Hope this answers your question.

Offline gridishere

  • Thread Starter
  • Posts: 26
  • Location: Shanghai
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #70 on: Thu, 30 August 2018, 21:48:57 »
Uh I can't for the life of me figure out how the modules are changed. Does anyone here know?

The modules are secured by screws drilling from the bottom of the chassis.

To change them, you will need to unscrew (and unplug the internal connection for FLASH or PRESS) and screw them back in.

Offline coffeeshopcoder

  • Posts: 227
  • Location: California
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #71 on: Thu, 30 August 2018, 22:35:30 »
Simple question - how does the plate fit in the case ?
Another person already asked this, and got an answer that its a standard 60% plate can be used and its tray mount. Thats great, my question is how exactly does it fit ?
As in, does one lower the pcb and plat directly from the top ? the bottom chassis seems to be a single piece ?
Also is the left and right side of the chassis hollow ?

The switches are secured by the plate and the plate is secured by the switches too :) The 4 sides of the plate should be flush with the PCB, so you could simply put the assembled PCB and Plate into the chassis and then secure the PCB from moving by screws.

And no, the left and right sides of the chassis are solid.

Hope this answers your question.

Perfect ! thank you !
I got in for a white powder coated chassis with a black classic and a purple 'peaks' modules.
Looking forward to this !!!

Offline esavage

  • Posts: 3
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #72 on: Fri, 31 August 2018, 22:02:38 »
lightbar version of this looks awesome. Definite pickup for me



Offline sneaky101

  • Posts: 21
  • Location: Australia
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #73 on: Sun, 02 September 2018, 02:36:09 »
Bought the Press module! Love the design.  Question: does the Press PCB support backlighting?

Offline OkKarma

  • Posts: 12
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #74 on: Sun, 02 September 2018, 05:10:59 »
What is the ETA on production and delivery?

Online slxdegrees

  • Posts: 111
  • Location: Kerning City
  • i write nice things to make people buy stuff
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #75 on: Sun, 02 September 2018, 05:15:35 »
What is the ETA on production and delivery?

Dec 2018

Offline gridishere

  • Thread Starter
  • Posts: 26
  • Location: Shanghai
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #76 on: Tue, 04 September 2018, 06:53:41 »
Bought the Press module! Love the design.  Question: does the Press PCB support backlighting?

Sure, will have RGB support and you dont need to solder the LEDs :). Updates soon!

Offline OkKarma

  • Posts: 12
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #77 on: Tue, 18 September 2018, 11:39:25 »
Any update?

Offline glubazoid

  • Posts: 89
  • Location: Los Angeles, CA
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #78 on: Fri, 19 October 2018, 00:55:51 »
Any updates?

Offline Darknight00z

  • Posts: 497
  • Location: UK
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #79 on: Fri, 19 October 2018, 14:13:55 »
On the zfrontier updates page it says "Order submitted. On schedule." from Oct 9th

Offline RETURNISO

  • Posts: 220
  • Location: ISO
  • Norde
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #80 on: Fri, 19 October 2018, 15:14:15 »
R2 Please  ^-^

Offline Darknight00z

  • Posts: 497
  • Location: UK
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #81 on: Tue, 27 November 2018, 17:34:29 »
Any updates?

Offline MoarCoffeePlzzz

  • Formerly Deeptek
  • Posts: 68
  • Location: Memphis TN
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #82 on: Sat, 01 December 2018, 15:59:44 »
Id be curious to know how many of these cases were ordered? Does anyone know?

Offline glubazoid

  • Posts: 89
  • Location: Los Angeles, CA
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #83 on: Thu, 06 December 2018, 00:58:51 »
Are we still on time for a Dec. shipping date?

Offline DukeEsquire

  • Posts: 26
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #84 on: Thu, 06 December 2018, 01:25:36 »
I'm interested in changing my black keyboard with the white one instead. Is there any way to do that?

Offline Jkush463

  • Posts: 290
  • Location: Aurora, IL
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #85 on: Thu, 06 December 2018, 02:11:17 »
I'm interested in changing my black keyboard with the white one instead. Is there any way to do that?

jeez a little late for a major change no? lol that something you should have sorted out long ago i feel but message ZF.

Offline LevelSteam

  • Posts: 157
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #86 on: Thu, 06 December 2018, 07:41:11 »
Hope this runs again at some point. I really regret not grabbing one at the time....
« Last Edit: Mon, 10 December 2018, 21:26:01 by LevelSteam »

Offline RETURNISO

  • Posts: 220
  • Location: ISO
  • Norde
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #87 on: Sun, 09 December 2018, 19:45:00 »
Hope this runs again at some point. I really regret not gravving one at the time....

Same. I really, really hope it will run again! Looks super crisp what he is doing with it  :eek:

Check this update on https://www.zfrontier.com/post/detail/11040

Offline Darknight00z

  • Posts: 497
  • Location: UK
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #88 on: Mon, 10 December 2018, 15:31:21 »
Finally an update!!

I hope we can receive the boards before CNY!

Offline gutsack

  • Posts: 181
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #89 on: Fri, 14 December 2018, 16:28:59 »
Had momentary shock the other day when I received a shipping notice from zFrontier that claimed it contained both my Leaf and grid in the same shipment, which I didn't think was possible. Package arrived today and, of course, it contained only the Leaf. Makes sense, but :'(

(Edit: typo)

Offline PancakeMSTR

  • Posts: 422
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #90 on: Sat, 15 December 2018, 18:44:15 »
So what's the status on the grid? Getting slightly anxious from lack of updates.
   

Offline rdg

  • Posts: 8
  • Location: California
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #91 on: Sun, 16 December 2018, 15:21:56 »
So what's the status on the grid? Getting slightly anxious from lack of updates.

They posted an update on keebtalk Dec 5th

https://www.keebtalk.com/t/gb-grid-600-group-buy-is-here-updates/3156/42

Quote
There is an update, please check:
https://www.gridishere.com/updates/module4-flash-module-5-press-updates-and-more/

Thank you~

...

The shipping will happen between Dec 2018 and Jan 2019. We are pushing our vendor but quality is the first concern.

Offline lakeboredom

  • Posts: 42
  • Location: US-CA
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #92 on: Thu, 27 December 2018, 03:14:36 »
Are we ever going to be refunded for the Neon modules in US orders?

Offline 2ndRoad805

  • Posts: 21
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #93 on: Fri, 28 December 2018, 00:14:35 »
Any word on an r2?

Offline Darknight00z

  • Posts: 497
  • Location: UK
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #94 on: Fri, 28 December 2018, 08:04:45 »
Any word on an r2?

lol.

This current run is behind schedule already :(

Offline PancakeMSTR

  • Posts: 422
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #95 on: Fri, 28 December 2018, 11:40:53 »
Are we ever going to be refunded for the Neon modules in US orders?

I'm increasingly worried that the thing won't ever ship, let alone that we'll get refunds.
   

Offline lakeboredom

  • Posts: 42
  • Location: US-CA
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #96 on: Fri, 28 December 2018, 13:21:57 »
Lol youre talking to someone still waiting for his Elemento Fr87. I trust Zfrontier.

Offline Darknight00z

  • Posts: 497
  • Location: UK
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #97 on: Fri, 28 December 2018, 14:13:43 »
Lol youre talking to someone still waiting for his Elemento Fr87. I trust Zfrontier.

I can't tell if that is sarcastic or not. :O

Offline lakeboredom

  • Posts: 42
  • Location: US-CA
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #98 on: Fri, 28 December 2018, 14:31:57 »
Lol youre talking to someone still waiting for his Elemento Fr87. I trust Zfrontier.

I can't tell if that is sarcastic or not. :O
Neither can I tbh ;p

Offline Jkush463

  • Posts: 290
  • Location: Aurora, IL
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #99 on: Fri, 28 December 2018, 16:48:23 »
gonna go ahead and guess well never see refunds, ZF is a jokee

Offline PancakeMSTR

  • Posts: 422
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #100 on: Fri, 28 December 2018, 18:24:03 »
Sucks.

Still some time yet before I pull the trigger on chargeback. Gonna wait as long as I can.
   

Offline lakeboredom

  • Posts: 42
  • Location: US-CA
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #101 on: Fri, 28 December 2018, 18:45:11 »
It hasnt even been that long, you guys are crazy.

Offline Jkush463

  • Posts: 290
  • Location: Aurora, IL
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #102 on: Wed, 02 January 2019, 17:32:45 »
Im not crazy, ZF ha ****ed me several times, i have my reasons to be doubtful as do plenty of others, they are possibly the most unprofessional bushiness i have ever dealt with.

Offline MoarCoffeePlzzz

  • Formerly Deeptek
  • Posts: 68
  • Location: Memphis TN
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #103 on: Wed, 02 January 2019, 23:46:11 »
Im not crazy, ZF ha ****ed me several times, i have my reasons to be doubtful as do plenty of others, they are possibly the most unprofessional bushiness i have ever dealt with.

And yet you still give them money?

Offline PancakeMSTR

  • Posts: 422
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #104 on: Fri, 04 January 2019, 16:35:34 »
Im not crazy, ZF ha ****ed me several times, i have my reasons to be doubtful as do plenty of others, they are possibly the most unprofessional bushiness i have ever dealt with.

Could you elaborate? For me personally, I joined this GB because I thought zfrontier was a reputable vendor.
   

Offline glubazoid

  • Posts: 89
  • Location: Los Angeles, CA
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #105 on: Fri, 11 January 2019, 02:05:13 »
I don't mind waiting a little bit longer, as we've seen the updates and actual photos. But would it be possible to get a new estimated shipping date?

Offline PancakeMSTR

  • Posts: 422
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #106 on: Fri, 11 January 2019, 12:25:15 »
It would be nice to have a meaningful update of any sort, let alone estimated new ship date.

Rapidly losing faith in this buy.
   

Offline fer.real

  • Posts: 81
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #107 on: Fri, 11 January 2019, 12:40:34 »
It would be nice to have a meaningful update of any sort, let alone estimated new ship date.

Rapidly losing faith in this buy.

Updates showing progress have been posted on the Grid website https://www.gridishere.com/updates-page/.  The last one was about a month ago.

Offline MoarCoffeePlzzz

  • Formerly Deeptek
  • Posts: 68
  • Location: Memphis TN
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #108 on: Fri, 11 January 2019, 16:30:54 »
Hopefully we here something soon... Coming up on 5 months...

Offline thearctican

  • Posts: 64
  • Location: Philadelphia, PA
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #109 on: Mon, 14 January 2019, 08:50:53 »
Hopefully we here something soon... Coming up on 5 months...
I hope so, too. Last I heard they were shipping "Between December 2018 and January 2019". Two weeks to go in January; hopefully these go out soon, or we here *something* from the Grid team.

Offline tex_live_utility

  • Posts: 270
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #110 on: Tue, 15 January 2019, 03:46:18 »
It hasnt even been that long, you guys are crazy.

zFrontier has been horrible about communicating with Western buyers. After DSA Starry Night I have a lot less trust in them than before.

Offline lakeboredom

  • Posts: 42
  • Location: US-CA
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #111 on: Wed, 16 January 2019, 02:00:47 »
This'll be my first 60, anyone have good ideas about what pcb theyre gonna use? Could use a suggestion.

Offline thearctican

  • Posts: 64
  • Location: Philadelphia, PA
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #112 on: Wed, 16 January 2019, 13:46:39 »
This'll be my first 60, anyone have good ideas about what pcb theyre gonna use? Could use a suggestion.

I've got a Zeal60 with a frosted polycarbonate plate and MX Zilents that's going on there. Will desolder corner or win switches if I like the blockers enough. Gonna sell the blockers if I don't want/need them.

Offline lakeboredom

  • Posts: 42
  • Location: US-CA
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #113 on: Wed, 16 January 2019, 19:45:10 »
We get blockers?

Offline MoarCoffeePlzzz

  • Formerly Deeptek
  • Posts: 68
  • Location: Memphis TN
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #114 on: Wed, 16 January 2019, 21:04:37 »
I reached out to Grid last week and finally got a reply back.. here is what the email said:

Quote
Hi Ryan,

Of course. My bad.
We had some issues with PCB manufacturing. One of our vendors gave us bad MCUs which ruined many of our efforts.

Grid 600 will start shipping Jan 25 for western buyers. I know it is late already and I am super sorry for that. I am preparing an update and a possible compensation plan for people.

Thanks for your support!

Best,
grid

Offline MoarCoffeePlzzz

  • Formerly Deeptek
  • Posts: 68
  • Location: Memphis TN
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #115 on: Wed, 16 January 2019, 21:06:07 »
This'll be my first 60, anyone have good ideas about what pcb theyre gonna use? Could use a suggestion.

Mekanisk Nerd60 and Brass plate. That PCB might be tough to find but a DZ60 will be super easy to find and pretty cheap too!


Blockers were an add-on.
« Last Edit: Wed, 16 January 2019, 21:08:03 by MoarCoffeePlzzz »

Offline lakeboredom

  • Posts: 42
  • Location: US-CA
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #116 on: Wed, 16 January 2019, 21:08:44 »
Is there any pcb that lets you program is on the fly like a poker?

Offline thearctican

  • Posts: 64
  • Location: Philadelphia, PA
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #117 on: Thu, 17 January 2019, 10:26:04 »
I reached out to Grid last week and finally got a reply back.. here is what the email said:

Quote
Hi Ryan,

Of course. My bad.
We had some issues with PCB manufacturing. One of our vendors gave us bad MCUs which ruined many of our efforts.

Grid 600 will start shipping Jan 25 for western buyers. I know it is late already and I am super sorry for that. I am preparing an update and a possible compensation plan for people.

Thanks for your support!

Best,
grid

This is the second best news I've heard this week.

We get blockers?

They were an add-on group buy. https://en.zfrontier.com/products/grid600ac

I got the white HHKB blockers to go with the white case. I imagine they're screwed into the PCB from the bottom. I also picked up a second blank top module for experimentation.


Offline lakeboredom

  • Posts: 42
  • Location: US-CA
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #118 on: Thu, 17 January 2019, 10:29:55 »
Ah forgot about those. Was considering hkb if not for my ca66. Got like 5 of the top cover modules though ;P

Offline thearctican

  • Posts: 64
  • Location: Philadelphia, PA
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #119 on: Tue, 22 January 2019, 08:55:55 »
Ah forgot about those. Was considering hkb if not for my ca66. Got like 5 of the top cover modules though ;P

Yeah I wish I would have gotten more of the top modules. Oh well, hopefully we see a bit more stock.

Offline thearctican

  • Posts: 64
  • Location: Philadelphia, PA

Offline Master_Zebra

  • Posts: 7
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #121 on: Tue, 22 January 2019, 16:32:32 »
Yes! So exicted!

Offline glubazoid

  • Posts: 89
  • Location: Los Angeles, CA
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #122 on: Tue, 22 January 2019, 18:05:42 »
Really appreciate the detail in this, thanks and canít wait!

Offline macclack

  • Posts: 178
  • Location: San Diego, CA
    • Macclack
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #123 on: Tue, 22 January 2019, 21:17:00 »
Yes! So exicted!

Hot damn. This is unexpected and exciting.

Offline Darknight00z

  • Posts: 497
  • Location: UK
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #124 on: Wed, 23 January 2019, 20:18:02 »
oh man, i hope these get shipped out before CNY

Offline PancakeMSTR

  • Posts: 422
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #125 on: Wed, 23 January 2019, 22:12:41 »
oh man, i hope these get shipped out before CNY

Says Jan 25 up there somewhere so...crossing my fingers.
   

Offline thearctican

  • Posts: 64
  • Location: Philadelphia, PA
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #126 on: Fri, 25 January 2019, 23:44:15 »
oh man, i hope these get shipped out before CNY

Says Jan 25 up there somewhere so...crossing my fingers.

Was reading a post on the Chinese ZFrontier site that the grids have been sent to ZFrontier for distribution.
https://www.zfrontier.com/post/detail/11040

"After some episodes(?), I can happily tell you that the components of the grid600 have been sent to zF. Most of the orders will be issued in the next week or two. I apologize for the delay in delivery due to the late delivery and the arrival of the New Year."
Thanks, Google Translate.

And now we wait on ZFrontier.

Offline proboy84

  • Posts: 9
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #127 on: Sat, 02 February 2019, 21:12:54 »
No shipping notification from Zfrontier but got contact from DHL today for a shipment from them, Finally!!
« Last Edit: Sat, 02 February 2019, 21:23:42 by proboy84 »

Offline thearctican

  • Posts: 64
  • Location: Philadelphia, PA
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #128 on: Sat, 02 February 2019, 21:14:15 »
No shipping notification from Zfrontier but got contact from DHL today for a shipment form them, Finally!!
That's awesome to hear! Eagerly awaiting mine. What have you got coming?

Offline proboy84

  • Posts: 9
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #129 on: Sat, 02 February 2019, 22:12:34 »
I should receive it tomorrow or the day after. I've order a green one with a peak top module.

Offline macclack

  • Posts: 178
  • Location: San Diego, CA
    • Macclack
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #130 on: Sun, 03 February 2019, 10:37:52 »
No shipping notification from Zfrontier but got contact from DHL today for a shipment from them, Finally!!

Dope. Can't wait to get my hands on one of these.

Offline MoarCoffeePlzzz

  • Formerly Deeptek
  • Posts: 68
  • Location: Memphis TN
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #131 on: Sun, 03 February 2019, 19:54:14 »
Looking to pick up an extra classic black top in the US. If anyone is going to have one they are looking to sell please PM me.

Offline proboy84

  • Posts: 9
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #132 on: Sun, 03 February 2019, 20:26:00 »
Mail day on Chinese New Year!!

Love PEAK Top under the light

« Last Edit: Sun, 03 February 2019, 20:27:38 by proboy84 »

Offline thearctican

  • Posts: 64
  • Location: Philadelphia, PA
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #133 on: Sun, 03 February 2019, 20:31:39 »
Mail day on Chinese New Year!!

Love PEAK Top under the light

Show Image


Ohhhh that looks sick.
Anybody wanna design a brass one? I'm sure thhere woudl be a good number of people who'd be interested.

Offline macclack

  • Posts: 178
  • Location: San Diego, CA
    • Macclack
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #134 on: Sun, 03 February 2019, 23:12:27 »
Mail day on Chinese New Year!!

Love PEAK Top under the light

Show Image


So do these things ship with sound dampening material? Looks pretty cool.

Offline PancakeMSTR

  • Posts: 422
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #135 on: Mon, 04 February 2019, 11:24:13 »
Would be nice to hear something from Zfrontier or DHL about the status of my order....
   

Offline Master_Zebra

  • Posts: 7
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #136 on: Mon, 04 February 2019, 11:57:30 »
Received mine just now. Canadian over here! No nothing from Zfrontier or DHL just arrived at my door. They declared 100$, still had to pay duties :(. Sorry don't know how to post pictures so here's an imgur album! Hope you all get yours soon. https://imgur.com/a/QzZ2qqL

Offline BerserkZz

  • Posts: 32
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #137 on: Tue, 05 February 2019, 21:14:45 »
I usually don't do this, but damn this turns out incredibly better than I expected for this price range. Anodization is one of the best, build quality is also top notch, on par with my TX and M60 and I'm not exaggerating. The inclusion of silencing foam turns out great. Another great thing is that they add dampening plastic ring underneath each screw. Overall, I'm astounded.  This is THE BEST price to value product this community has ever offered, and yes I know about kbdfans. Their products are wonderful, but this is just better.

Offline Wolframme

  • Posts: 3
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #138 on: Tue, 05 February 2019, 23:37:35 »
Well, all the good feedback and pictures certainly makes me excited. Hopefully, mine will be in eventually...

Offline proboy84

  • Posts: 9
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #139 on: Wed, 06 February 2019, 00:43:58 »
I usually don't do this, but damn this turns out incredibly better than I expected for this price range. Anodization is one of the best, build quality is also top notch, on par with my TX and M60 and I'm not exaggerating. The inclusion of silencing foam turns out great. Another great thing is that they add dampening plastic ring underneath each screw. Overall, I'm astounded.  This is THE BEST price to value product this community has ever offered, and yes I know about kbdfans. Their products are wonderful, but this is just better.

Agreed, I'm so please with the build quality.

Offline BasicallyGod

  • Posts: 12
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #140 on: Wed, 06 February 2019, 07:16:29 »
Anyone received a white one yet? Would love some pictures, hoping my white neon will get shipped in the next few days, really excited for this thing!

Offline macclack

  • Posts: 178
  • Location: San Diego, CA
    • Macclack
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #141 on: Wed, 06 February 2019, 08:37:30 »
I usually don't do this, but damn this turns out incredibly better than I expected for this price range. Anodization is one of the best, build quality is also top notch, on par with my TX and M60 and I'm not exaggerating. The inclusion of silencing foam turns out great. Another great thing is that they add dampening plastic ring underneath each screw. Overall, I'm astounded.  This is THE BEST price to value product this community has ever offered, and yes I know about kbdfans. Their products are wonderful, but this is just better.

I am in agreement. For what this thing cost it was a steal.

Offline OkKarma

  • Posts: 12
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #142 on: Wed, 06 February 2019, 08:52:08 »
Emailed him on Jan 21:

Quote
Thanks for contacting me.
The shipping of grid600 will begin in 4 days for western buyers if you order black chassis and modules.
The color ones and white chassis will be a little bit late due to manufacturing issues.
Still, we should be able to ship all of them before February.

You can find previous updates here: https://www.gridishere.com/updates-page/

Let me know if you have any questions.

So most likely to ship after CNY.

Offline thearctican

  • Posts: 64
  • Location: Philadelphia, PA
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #143 on: Wed, 06 February 2019, 09:56:27 »
Anyone received a white one yet? Would love some pictures, hoping my white neon will get shipped in the next few days, really excited for this thing!
I'll bet getting my white one once it ships. It's getting a Zeal60 so It'll be pretty.

Sent from my Pixel 2 using Tapatalk


Offline Starius

  • Posts: 265
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #144 on: Tue, 12 February 2019, 12:20:05 »
I very much regret not getting in on this group buy. 

Offline DukeEsquire

  • Posts: 26
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #145 on: Tue, 12 February 2019, 16:41:21 »
Has anyone received their white ones yet?

Offline BasicallyGod

  • Posts: 12
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #146 on: Tue, 12 February 2019, 18:33:14 »
Has anyone received their white ones yet?

Nope not yet, not a word from DHL or zfrontier  :(

Offline trexous

  • Posts: 63
  • Location: Australia
  • ~.~
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #147 on: Wed, 13 February 2019, 10:05:33 »
any extrtas?

Offline BasicallyGod

  • Posts: 12
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #148 on: Wed, 13 February 2019, 10:41:26 »
any extrtas?

It was mentioned that there would be, might be a while though as R1 is still trickling through to GB buyers.

EDIT

Seems like there will be a VERY smal number of extras and there is no plan to run an R2:


« Last Edit: Wed, 13 February 2019, 10:48:03 by BasicallyGod »

Offline thearctican

  • Posts: 64
  • Location: Philadelphia, PA
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #149 on: Wed, 13 February 2019, 13:04:46 »
Has anyone received their white ones yet?

Nope not yet, not a word from DHL or zfrontier  :(

Same. What's up, zF?

Offline lakeboredom

  • Posts: 42
  • Location: US-CA
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #150 on: Wed, 13 February 2019, 15:37:21 »
Anyone know if the G60 pcb would work in the Grid600 case?

Offline RETURNISO

  • Posts: 220
  • Location: ISO
  • Norde
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #151 on: Wed, 13 February 2019, 15:48:40 »
Anyone know if the G60 pcb would work in the Grid600 case?

Yes its GH60 compat!

Offline LevelSteam

  • Posts: 157
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #152 on: Wed, 13 February 2019, 18:53:18 »
If anyone has a black "press" module that they decided they dont want I'd love to buy it.

Offline Wolframme

  • Posts: 3
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #153 on: Wed, 13 February 2019, 20:09:44 »
Has anyone received their white ones yet?

Verifying as well, no notifications yet for my white one from DHL or zFrontier.

Offline lakeboredom

  • Posts: 42
  • Location: US-CA
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #154 on: Sat, 16 February 2019, 01:14:57 »
Any US customers who bought NEON, get refunded for reduced price without tritium vials? I still haven't lol...

Offline PancakeMSTR

  • Posts: 422
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #155 on: Sat, 16 February 2019, 11:27:35 »
Any US customers who bought NEON, get refunded for reduced price without tritium vials? I still haven't lol...

There is a 100% chance we won't get refunded for the tritium.

So I ordered a white neon and just got a message from DHL that it will arrive on 2/20. I'll try and post pictures when it arrives.

   

Offline Wolframme

  • Posts: 3
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #156 on: Sat, 16 February 2019, 20:39:05 »
As of today DHL messaged me that my white with purple flash is arriving on the 19th.

Offline fer.real

  • Posts: 81
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #157 on: Sun, 17 February 2019, 05:56:15 »
Did anyone who received a notification from DHL also get a notification from zFrontier?

Offline OkKarma

  • Posts: 12
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #158 on: Mon, 18 February 2019, 03:47:32 »
I received no notification from either DHL nor zFrontier, but my white case + black flash appeared today to Sweden, no import fees (which is magic).

The build quality is exquisite! Super impressed.

Offline briemens

  • Posts: 6
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #159 on: Mon, 18 February 2019, 13:20:30 »
Received my white Grid600 today.

It's really nice in person, clean and heavy.


Offline macclack

  • Posts: 178
  • Location: San Diego, CA
    • Macclack
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #160 on: Mon, 18 February 2019, 13:59:13 »
Received my white Grid600 today.

It's really nice in person, clean and heavy.

Show Image


That looks really good. I like the blank key caps with it.

Offline RETURNISO

  • Posts: 220
  • Location: ISO
  • Norde
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #161 on: Mon, 18 February 2019, 14:15:31 »
Received my white Grid600 today.

It's really nice in person, clean and heavy.

Show Image


Looks dope! How is the white powder coating finish?

Offline briemens

  • Posts: 6
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #162 on: Mon, 18 February 2019, 14:20:28 »
The powder coat is clean, smooth and even. I'm very impressed with the quality.  :thumb:

Offline RETURNISO

  • Posts: 220
  • Location: ISO
  • Norde
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #163 on: Mon, 18 February 2019, 14:32:00 »
The powder coat is clean, smooth and even. I'm very impressed with the quality.  :thumb:

Nice! GREAT news :) please do show some more pics  :p love the blanks and the neo noir design of it!

Offline BasicallyGod

  • Posts: 12
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #164 on: Mon, 18 February 2019, 16:00:44 »
I received no notification from either DHL nor zFrontier, but my white case + black flash appeared today to Sweden, no import fees (which is magic).

You have given me hope that it might just arrive this week!

To be fair I ordered on 30/08 so I'm probably the last in line  :))

Offline spyruf

  • Posts: 42
  • Location: USA
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #165 on: Mon, 18 February 2019, 18:14:40 »
any update on extras? looking to pick up one with flash.

Offline 2ndRoad805

  • Posts: 21
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #166 on: Mon, 18 February 2019, 20:03:14 »
What can I do if I never received the rubber feet?

Offline coffeeshopcoder

  • Posts: 227
  • Location: California
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #167 on: Mon, 18 February 2019, 22:58:19 »
no shipping notifications so far... are there others who have not received shipping info as well ?

Offline rdg

  • Posts: 8
  • Location: California
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #168 on: Tue, 19 February 2019, 00:09:47 »
Looks like there's going to be delays for some of our white orders. Though I'd rather get a good product a bit later than something I'll be unhappy with. Email from zFrontier:

Quote
Hi,

We are here to inform you that we have finish shipping 70% of the Grid 600 orders and we are sorry to inform you that this is as many as we could go as for now.

The delay of the remaining orders are due to the high defective rate of White Powder Coating finish (scratches, tints, uneven finish etc. on the surface) and these will not pass our QC standards and Grid is recalling them back to the factory to fix the issue. All the remaining orders are white kits.

Here's a list of orders that we have yet to fulfill. If your order number or one of your order numbers ends in these 4 numbers, your order or orders are delayed. Please be patient, we will ship them out to you once the cases get back to us.

Grid and us are working hard to get the boards to you as soon as possible and will work out a plan to compensate these unfortunately-delayed orders for the extra waiting time.

5277
5278
5284
5292
5293
5296
5298
5299
5303
5304
5315
5328
5340
5346
5360
5376
5384
5393
5479
5483
5489
5504
5514
5517
5518
5521
5523
5526
5527
5529
5530
5533
5534
5535
5538
5539
5540

« Last Edit: Tue, 19 February 2019, 00:18:50 by rdg »

Offline neon_tom

  • Posts: 189
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #169 on: Tue, 19 February 2019, 05:52:23 »
Anyone else have an order on the delayed list but didnít order a white board? Mine is delayed and I ordered black. Iíve already emailed zfrontier for clarification.

Offline thearctican

  • Posts: 64
  • Location: Philadelphia, PA
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #170 on: Tue, 19 February 2019, 06:40:39 »
Well, mines on the list. Dang.

Sent from my Pixel 2 using Tapatalk


Offline coffeeshopcoder

  • Posts: 227
  • Location: California
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #171 on: Tue, 19 February 2019, 12:40:02 »
I'm on the list ... But I too would rather wait for better quality than get it rushed with blemishes.
I really like the Neon module now. Anyone who has received their "peaks" module care to share a few pictures ? 

Offline thearctican

  • Posts: 64
  • Location: Philadelphia, PA
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #172 on: Tue, 19 February 2019, 12:58:33 »
I'm on the list ... But I too would rather wait for better quality than get it rushed with blemishes.
I really like the Neon module now. Anyone who has received their "peaks" module care to share a few pictures ?
Im personally hoping somebody with more know how will make an interesting module out of PC or something.

Sent from my Pixel 2 using Tapatalk


Offline PancakeMSTR

  • Posts: 422
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #173 on: Tue, 19 February 2019, 20:17:28 »
Got my white neon. Looks good to me: https://imgur.com/gallery/xPdrE6F

Garbage pic tho... sorry bout that.


Question: I'm planning on building this with a DZ60. How do I make this work with the plate? I don't really want to do a plateless build.
« Last Edit: Tue, 19 February 2019, 21:00:36 by PancakeMSTR »
   

Offline thearctican

  • Posts: 64
  • Location: Philadelphia, PA
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #174 on: Tue, 19 February 2019, 22:00:26 »
Got my white neon. Looks good to me: https://imgur.com/gallery/xPdrE6F

Garbage pic tho... sorry bout that.


Question: I'm planning on building this with a DZ60. How do I make this work with the plate? I don't really want to do a plateless build.
Since the grid is tray mount, you'll build the board, plate and all, outside of the board, then drop it in and screw it down. Make sure you connect the daughter board before installing the board into the case.

Sent from my Pixel 2 using Tapatalk


Offline PancakeMSTR

  • Posts: 422
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #175 on: Tue, 19 February 2019, 23:24:57 »
Got my white neon. Looks good to me: https://imgur.com/gallery/xPdrE6F

Garbage pic tho... sorry bout that.


Question: I'm planning on building this with a DZ60. How do I make this work with the plate? I don't really want to do a plateless build.
Since the grid is tray mount, you'll build the board, plate and all, outside of the board, then drop it in and screw it down. Make sure you connect the daughter board before installing the board into the case.

Sent from my Pixel 2 using Tapatalk

Thanks. I ended up figuring it out myself after thinking about it for an embarrassingly long time. Am dumb.
   

Offline fer.real

  • Posts: 81
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #176 on: Wed, 20 February 2019, 08:27:17 »
I found a picture of the "blemishes."  Yikes!

213358-0

https://www.zfrontier.com/post/detail/11040
« Last Edit: Wed, 20 February 2019, 13:05:28 by fer.real »

Offline DukeEsquire

  • Posts: 26
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #177 on: Wed, 20 February 2019, 11:11:46 »
I just got my white Grid 600.

As far as I can tell, there are zero blemishes. The material is really nice and honestly once of the nicest boards I've owned. It's on par with stuff from Rama Works.

Offline DoCallMeKing

  • Posts: 33
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #178 on: Thu, 21 February 2019, 05:53:33 »
Anyone who wants to sell their grid, please let me know! I will pay flip price for it if need be. Just really want to get one of these. Please PM me. Iíd really love the flash top but hit me up and letís work something out.
Thanks!

Offline tex_live_utility

  • Posts: 270
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #179 on: Thu, 21 February 2019, 08:42:59 »
Got mine. White is flawless. Excellent case design. Nice and light too, but not TOO light.

That said, looking to trade some parts...

Have: purple PRESS module, black CLASSIC module

Want: white PRESS module, white CLASSIC module

Offline LevelSteam

  • Posts: 157
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #180 on: Thu, 21 February 2019, 09:12:45 »
Want: white PRESS module, white CLASSIC module

Modules only came in black, green, purple and rose gold. You could always have your exisiting modules powder coated though.

Offline tex_live_utility

  • Posts: 270
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #181 on: Thu, 21 February 2019, 12:59:34 »
Want: white PRESS module, white CLASSIC module

Modules only came in black, green, purple and rose gold. You could always have your exisiting modules powder coated though.

Yep someone already set me straight on this  :)) I was wondering how I bought the "wrong" color.

Offline BasicallyGod

  • Posts: 12
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #182 on: Thu, 21 February 2019, 14:52:56 »
Got my white neon. Looks good to me: https://imgur.com/gallery/xPdrE6F

Garbage pic tho... sorry bout that.

Don't suppose you could nab a better pic? Looks gorgeous, super jealous!

Offline PancakeMSTR

  • Posts: 422
Re: [IC] grid 600, a 60% chassis w/ interchangeable pieces PROTOTYPE!
« Reply #183 on: Thu, 21 February 2019, 22:08:12 »
Got my white neon. Looks good to me: https://imgur.com/gallery/xPdrE6F

Garbage pic tho... sorry bout that.

Don't suppose you could nab a better pic? Looks gorgeous, super jealous!

It is gorgeous. I'll work on a better pic