Author Topic: sleepy - little updates  (Read 4174 times)

0 Members and 1 Guest are viewing this topic.

Online sleepy

  • Formerly palth
  • Thread Starter
  • Posts: 76
  • Location: under a blanket
sleepy - little updates
« on: Mon, 16 July 2018, 11:44:58 »
Hi everyone!! You may have seen me around Geekhack but today I'm here to show you some stuff I've been working on!!  ;)

My girlfriend and I have been making some Topre escape/fn/wasd sets! The molds are a bit tough to get perfect but we're working towards it slowly I think! Here's a sneak peek of our iridescent soapy esc/fn set. The set may glow slightly pink in the dark. ;) Sorry about the potato pic!!



The plan now is to find a $ynth and make some MX caps too! :thumb: Hope you are all having a wonderful Monday.



« Last Edit: Mon, 31 December 2018, 12:54:44 by sleepy »

Online Bastimret

  • Posts: 252
Re: Palth - Makin some Topre sets!
« Reply #1 on: Mon, 16 July 2018, 11:49:12 »
Don't have a Topre board, but still following your work!  Looks great  :thumb:

Online LightningXI

  • * Esteemed Elder
  • Posts: 1771
  • Location: New York
  • PPD
    • ArtisanMacro
Re: Palth - Makin some Topre sets!
« Reply #2 on: Mon, 16 July 2018, 12:11:05 »
Pastel!!!!

Offline vegs

  • Posts: 340
  • Location: Norway
Re: Palth - Makin some Topre sets!
« Reply #3 on: Mon, 16 July 2018, 12:24:04 »
So niiiice
HHKB356mini | Salamander (soon) | Unikorn (soon) | 🐸 (soon)

Offline RyuDragoon

  • Posts: 93
Re: Palth - Makin some Topre sets!
« Reply #4 on: Mon, 16 July 2018, 12:40:45 »
Keep up the great work! Hope to see some of your artwork move into the Artisan world in the form of a sculpt!

Online sleepy

  • Formerly palth
  • Thread Starter
  • Posts: 76
  • Location: under a blanket
Re: Palth - Makin some Topre sets!
« Reply #5 on: Mon, 16 July 2018, 13:41:30 »
Don't have a Topre board, but still following your work!  Looks great  :thumb:

Pastel!!!!

So niiiice

THank you guys so much wow!  :)

Keep up the great work! Hope to see some of your artwork move into the Artisan world in the form of a sculpt!

We've been working on some sculpts! Just awaiting a pressure pot and deciding if we like how they look.  :thumb:


Offline BobCarltheThird

  • Posts: 226
Re: Palth - Makin some Topre sets!
« Reply #6 on: Mon, 16 July 2018, 14:44:43 »
Ooh you made a thread! Are you going to make more molds for topre or are you focusing on technique right now?
***loads of Vaseline for my meme TMO50 -- Acereconkeys


Online sleepy

  • Formerly palth
  • Thread Starter
  • Posts: 76
  • Location: under a blanket
Re: Palth - Makin some Topre sets!
« Reply #7 on: Mon, 16 July 2018, 15:34:30 »
Ooh you made a thread! Are you going to make more molds for topre or are you focusing on technique right now?

Hey Ben! :) Making lots of Topre molds right now!! The stems fit nicely but they look a bit wonky right now on the bottom, and sometimes the air bubbles makes them not look too nice (I'm hoping to buy a pressure pot soon).

Offline pr0ximity

  • Posts: 2286
  • Location: Vacationland
Re: Palth - Makin some Topre sets!
« Reply #8 on: Mon, 16 July 2018, 16:02:09 »
Lookin good sir

Offline BobCarltheThird

  • Posts: 226
Re: Palth - Makin some Topre sets!
« Reply #9 on: Mon, 16 July 2018, 16:09:20 »
Ooh you made a thread! Are you going to make more molds for topre or are you focusing on technique right now?

Hey Ben! :) Making lots of Topre molds right now!! The stems fit nicely but they look a bit wonky right now on the bottom, and sometimes the air bubbles makes them not look too nice (I'm hoping to buy a pressure pot soon).

Wait you've been doing all this without a pressure pot? NOICE
***loads of Vaseline for my meme TMO50 -- Acereconkeys


Online sleepy

  • Formerly palth
  • Thread Starter
  • Posts: 76
  • Location: under a blanket
Re: Palth - Makin some Topre sets!
« Reply #10 on: Mon, 16 July 2018, 16:16:54 »
Ooh you made a thread! Are you going to make more molds for topre or are you focusing on technique right now?

Hey Ben! :) Making lots of Topre molds right now!! The stems fit nicely but they look a bit wonky right now on the bottom, and sometimes the air bubbles makes them not look too nice (I'm hoping to buy a pressure pot soon).

Wait you've been doing all this without a pressure pot? NOICE

YEAH!! All gravity casts so far! :thumb:

Offline audax989

  • Posts: 668
  • Location: Guam
  • NOM NOM NOM
Re: Palth - Makin some Topre sets!
« Reply #11 on: Mon, 16 July 2018, 21:29:50 »
Hi everyone!! You may have seen me around Geekhack but today I'm here to show you some stuff I've been working on!!  ;)

My girlfriend and I have been making some Topre escape/fn/wasd sets! The molds are a bit tough to get perfect but we're working towards it slowly I think! Here's a sneak peek of our iridescent soapy esc/fn set. The set may glow slightly pink in the dark. ;) Sorry about the potato pic!!

Show Image


The plan now is to find a $ynth and make some MX caps too! :thumb: Hope you are all having a wonderful Monday.


We neeed Palth Prints!

Offline BobCarltheThird

  • Posts: 226
Re: Palth - Makin some Topre sets!
« Reply #12 on: Mon, 16 July 2018, 22:21:48 »
Hi everyone!! You may have seen me around Geekhack but today I'm here to show you some stuff I've been working on!!  ;)

My girlfriend and I have been making some Topre escape/fn/wasd sets! The molds are a bit tough to get perfect but we're working towards it slowly I think! Here's a sneak peek of our iridescent soapy esc/fn set. The set may glow slightly pink in the dark. ;) Sorry about the potato pic!!

Show Image


The plan now is to find a $ynth and make some MX caps too! :thumb: Hope you are all having a wonderful Monday.


We neeed Palth Prints!

Seconded
***loads of Vaseline for my meme TMO50 -- Acereconkeys


Online sleepy

  • Formerly palth
  • Thread Starter
  • Posts: 76
  • Location: under a blanket
Re: Palth - Makin some Topre sets!
« Reply #13 on: Mon, 16 July 2018, 23:55:34 »
We neeed Palth Prints!

We neeed Palth Prints!

Seconded

If I eventually do a sale I will DEFINITELY include prints of some of my drawings/artwork!!!  :)

Offline audax989

  • Posts: 668
  • Location: Guam
  • NOM NOM NOM
Re: Palth - Makin some Topre sets!
« Reply #14 on: Tue, 17 July 2018, 00:27:07 »
We neeed Palth Prints!

We neeed Palth Prints!

Seconded

If I eventually do a sale I will DEFINITELY include prints of some of my drawings/artwork!!!  :)

reeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Offline Edge.d

  • Posts: 32
  • Location: L.A
    • Dark Atelier
Re: Palth - Makin some Topre sets!
« Reply #15 on: Fri, 20 July 2018, 20:57:00 »
Lookin' good  :thumb:  Can't wait to see what sculpt you'll come up with!
Science must begin with myths, and with the criticism of myths.

Offline nmur

  • ಠ_ಠ
  • Posts: 1430
  • Location: Sydney
Re: Palth - Makin some Topre sets!
« Reply #16 on: Wed, 15 August 2018, 21:10:50 »
didn't know this thread existed

nice job so far, can't wait to see more
wtb/wttf: greyscale bots, milk blue clack (t), blank blue realforce set

Online sleepy

  • Formerly palth
  • Thread Starter
  • Posts: 76
  • Location: under a blanket
Re: Palth - Makin some Topre sets!
« Reply #17 on: Thu, 16 August 2018, 18:32:33 »
didn't know this thread existed

nice job so far, can't wait to see more

Thanks nmur! Hope all is well with you friend  ;)

Lookin' good  :thumb:  Can't wait to see what sculpt you'll come up with!

Wow thanks so much!! I saw your recent sale caps and they looked great :) I can't wait to show off the sculpts either! Haven't been able to find a $ynth yet so i've still been making blanks though :(


Online Signature

  • master of puppers
  • * Marketplace Moderator
  • Posts: 1450
  • Location: Sweden
  • Am good boy!
Re: Palth - Makin some Topre sets!
« Reply #18 on: Fri, 17 August 2018, 06:46:07 »
Great work! :D

Rest in peace Timberman

Offline sncbraxsc2

  • Posts: 314
  • Location: Florida
  • ⭐Domesticated Dweeb⭐
Re: Palth - Makin some Topre sets!
« Reply #19 on: Thu, 06 September 2018, 14:37:35 »
nice! I'm looking forward to seeing what you cook up:D
Cream Damped Mods Sound Test

Quote
So, logically, ALL of the time between NOW and SpaceRock, is the Test..

Online sleepy

  • Formerly palth
  • Thread Starter
  • Posts: 76
  • Location: under a blanket
Re: Palth - little update
« Reply #20 on: Thu, 27 December 2018, 15:41:47 »
hi everyone!! I figured i'm a bit overdue for an update. Things are coming together very slowly! I've started up making my own sculpt, got a pressure pot (which i'm still setting up  :p i'm not very strong at tightening attachments and whatnot), and opened a little online store for selling stickers that my girlfriend and i designed!







i've been having difficulty with finding energy to do artistic things, but i really want to finish this sculpt and get a cast done in the pressure pot.  i don't know if anything will come of my endeavors, but i'll keep trying!

anyhow, i know this isn't entirely related to keycaps, but if you want to see our store it's over here at https://www.sleepystore.net/. PS: I have some leftover KYC charity stickers from BunnyLake's black friday event; if you'd like one, feel free to PM me and I can send one your way!
« Last Edit: Thu, 27 December 2018, 17:03:04 by sleepy »

Online txclack

  • Posts: 130
  • Location: Texas
Re: Palth - little update
« Reply #21 on: Thu, 27 December 2018, 16:22:28 »
saaaweet sculpt, sleepy!


Offline funderburker

  • Posts: 924
  • Location: Latvia, Riga
    • LAGOM
Re: Palth - little update
« Reply #22 on: Fri, 28 December 2018, 06:59:09 »
hi everyone!! I figured i'm a bit overdue for an update. Things are coming together very slowly! I've started up making my own sculpt, got a pressure pot (which i'm still setting up  :p i'm not very strong at tightening attachments and whatnot), and opened a little online store for selling stickers that my girlfriend and i designed!

Show Image


Show Image


Show Image


i've been having difficulty with finding energy to do artistic things, but i really want to finish this sculpt and get a cast done in the pressure pot.  i don't know if anything will come of my endeavors, but i'll keep trying!

anyhow, i know this isn't entirely related to keycaps, but if you want to see our store it's over here at https://www.sleepystore.net/. PS: I have some leftover KYC charity stickers from BunnyLake's black friday event; if you'd like one, feel free to PM me and I can send one your way!

That's a beautiful sculpt! I love where you're going with it, keep it up! :heart:
Proto TMO50 | Barebones HHKB GH60 | Ducky Mini | 2x TMO50 FE (soon) | 🐸 (soon)

Online sleepy

  • Formerly palth
  • Thread Starter
  • Posts: 76
  • Location: under a blanket
Re: Palth - little update
« Reply #23 on: Fri, 28 December 2018, 14:17:28 »
nice! I'm looking forward to seeing what you cook up:D

hi everyone!! I figured i'm a bit overdue for an update. Things are coming together very slowly! I've started up making my own sculpt, got a pressure pot (which i'm still setting up  :p i'm not very strong at tightening attachments and whatnot), and opened a little online store for selling stickers that my girlfriend and i designed!

Show Image


Show Image


Show Image


i've been having difficulty with finding energy to do artistic things, but i really want to finish this sculpt and get a cast done in the pressure pot.  i don't know if anything will come of my endeavors, but i'll keep trying!

anyhow, i know this isn't entirely related to keycaps, but if you want to see our store it's over here at https://www.sleepystore.net/. PS: I have some leftover KYC charity stickers from BunnyLake's black friday event; if you'd like one, feel free to PM me and I can send one your way!

That's a beautiful sculpt! I love where you're going with it, keep it up! :heart:

saaaweet sculpt, sleepy!

Show Image


Great work! :D

you're all way too kind. reading these replies makes me smile!

Offline funderburker

  • Posts: 924
  • Location: Latvia, Riga
    • LAGOM
Re: Palth - little update
« Reply #24 on: Sat, 29 December 2018, 10:41:26 »
you're all way too kind. reading these replies makes me smile!

the more I check your sculpt out, I see that nose and think of this gif (more specifically that ending "boop"). It's just that nose you see and go "boop".

More
Proto TMO50 | Barebones HHKB GH60 | Ducky Mini | 2x TMO50 FE (soon) | 🐸 (soon)

Online sleepy

  • Formerly palth
  • Thread Starter
  • Posts: 76
  • Location: under a blanket
Re: Palth - little update
« Reply #25 on: Sun, 30 December 2018, 03:19:50 »


333/half satan blank. an idea i had so decided to whip up a quick prototype!

Online sleepy

  • Formerly palth
  • Thread Starter
  • Posts: 76
  • Location: under a blanket
Re: Palth - little update
« Reply #26 on: Sun, 30 December 2018, 12:57:32 »
you're all way too kind. reading these replies makes me smile!

the more I check your sculpt out, I see that nose and think of this gif (more specifically that ending "boop"). It's just that nose you see and go "boop".

More
Show Image

 :p Boopable snoots are always the best snoots!

Online sleepy

  • Formerly palth
  • Thread Starter
  • Posts: 76
  • Location: under a blanket
Re: Palth - little update
« Reply #27 on: Sun, 30 December 2018, 19:12:40 »


I made a master cast of the bun!  She's got a little pink hair clip.

Offline BobCarltheThird

  • Posts: 226
Re: Palth - little update
« Reply #28 on: Mon, 31 December 2018, 20:41:53 »
Show Image


I made a master cast of the bun!  She's got a little pink hair clip.

I love it :)
***loads of Vaseline for my meme TMO50 -- Acereconkeys


Online lovechan

  • Posts: 132
  • one for all,all for one,I'm lovechan,doing better.
    • HLZZ Keycaps
Re: sleepy - little updates
« Reply #29 on: Fri, 11 January 2019, 20:49:14 »
hi everyone!! I figured i'm a bit overdue for an update. Things are coming together very slowly! I've started up making my own sculpt, got a pressure pot (which i'm still setting up  :p i'm not very strong at tightening attachments and whatnot), and opened a little online store for selling stickers that my girlfriend and i designed!

Show Image


Show Image


Show Image


i've been having difficulty with finding energy to do artistic things, but i really want to finish this sculpt and get a cast done in the pressure pot.  i don't know if anything will come of my endeavors, but i'll keep trying!

anyhow, i know this isn't entirely related to keycaps, but if you want to see our store it's over here at https://www.sleepystore.net/. PS: I have some leftover KYC charity stickers from BunnyLake's black friday event; if you'd like one, feel free to PM me and I can send one your way!

cute x n   (๑ㅂ́)و✧

Online switchnollie

  • sleever supreme
  • * Exquisite Elder
  • Posts: 1060
  • Location: グレイハット
  • boi oh boi
Re: sleepy - little updates
« Reply #30 on: Fri, 11 January 2019, 20:51:46 »
lovechan, family u my fav :p

Online lovechan

  • Posts: 132
  • one for all,all for one,I'm lovechan,doing better.
    • HLZZ Keycaps
Re: sleepy - little updates
« Reply #31 on: Fri, 11 January 2019, 20:56:08 »

Online sleepy

  • Formerly palth
  • Thread Starter
  • Posts: 76
  • Location: under a blanket
Re: sleepy - little updates
« Reply #32 on: Sat, 12 January 2019, 16:27:41 »
hi everyone!! I figured i'm a bit overdue for an update. Things are coming together very slowly! I've started up making my own sculpt, got a pressure pot (which i'm still setting up  :p i'm not very strong at tightening attachments and whatnot), and opened a little online store for selling stickers that my girlfriend and i designed!

Show Image


Show Image


Show Image


i've been having difficulty with finding energy to do artistic things, but i really want to finish this sculpt and get a cast done in the pressure pot.  i don't know if anything will come of my endeavors, but i'll keep trying!

anyhow, i know this isn't entirely related to keycaps, but if you want to see our store it's over here at https://www.sleepystore.net/. PS: I have some leftover KYC charity stickers from BunnyLake's black friday event; if you'd like one, feel free to PM me and I can send one your way!

cute x n   (๑ㅂ́)و✧

thanks lovechan!  :-*