Author Topic: 【GB】F62-PE Custom Keyboard 8.2 invoice sent  (Read 24242 times)

0 Members and 1 Guest are viewing this topic.

Offline petamva

  • Posts: 45
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #50 on: Sat, 11 August 2018, 06:22:01 »
Haven't been invoiced yet... Still no answer from OP...

Offline beekey

  • Posts: 261
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #51 on: Thu, 13 September 2018, 10:24:49 »
Any update how this is going?

Offline befbef

  • Posts: 132
  • Location: Germany
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #52 on: Thu, 13 September 2018, 12:04:52 »
Was in contact with steven from geekmaker to catch an extra board. He said it gets shipped in 20 days.

What color did you all chose?
« Last Edit: Thu, 13 September 2018, 12:13:10 by befbef »

Offline beekey

  • Posts: 261
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #53 on: Thu, 13 September 2018, 12:41:06 »
Black, then putting Pulse Rams with Noir mods on it.

Offline befbef

  • Posts: 132
  • Location: Germany
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #54 on: Thu, 13 September 2018, 13:06:41 »
Oh wow, I was just searching for nice matching keycaps (have black too) and thought about Pulse with Rams. One thing I noticed: The PCB is angled that the SA bottom row fits exactly the case height. That's looking awesome. But works only with R4. R3 looks like this: http://kbdlab.co.kr/index.php?document_srl=5250867&mid=board_Lsno50
Not bad but with R4 it's just perfect.

Offline fer.real

  • Posts: 115
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #55 on: Thu, 13 September 2018, 13:11:19 »
Also going with black & Pulse.  I think that's going to look nice.

Offline beekey

  • Posts: 261
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #56 on: Thu, 13 September 2018, 14:29:01 »
Normally I prefer R3, with R4 I hit the caps edges too often. Lets see how this will feel.
Plan B would Carbon.

Offline beekey

  • Posts: 261
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #57 on: Thu, 27 September 2018, 14:52:11 »
Checking this again. Man Im so looking forward to getting this.  :D

Offline fer.real

  • Posts: 115
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #58 on: Thu, 27 September 2018, 15:45:33 »
Also hoping for an update.

Offline trikoi00

  • Posts: 77
  • Location: Singapore
  • GMK bias
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #59 on: Fri, 28 September 2018, 22:10:36 »
Looking to let of of my spot of Black color. PM me.

Sent from my SM-N960F using Tapatalk


Offline TieuNgu

  • Posts: 139
  • Location: US, AZ
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #60 on: Thu, 11 October 2018, 11:12:04 »
Any updates on this?

Offline beekey

  • Posts: 261
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #61 on: Tue, 23 October 2018, 02:40:29 »
Would it be possible to get the DXF files for the plate? I'm considering a custom plate from the Boardwalk GB http://www.panc.co/boardwalk-group-buy.html.

Offline TieuNgu

  • Posts: 139
  • Location: US, AZ
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #62 on: Thu, 25 October 2018, 23:35:43 »
Got a hold of OP. He was aiming to start shipping next week.




Offline beekey

  • Posts: 261
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #63 on: Fri, 26 October 2018, 00:45:01 »
Oh yeah, this looks good!

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11153
  • Location: Campaign Trail
  • "Do you shovel to survive, or survive to shovel?"
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #64 on: Fri, 26 October 2018, 02:10:39 »
Got a hold of OP. He was aiming to start shipping next week.

Show Image


Show Image


that was quick
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | MIRA SE | TGR Alice | Daily driver: TGR Alice

Everything you have said in the past has been false so I will keep my hope.

Offline Micrurus

  • Posts: 1
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #65 on: Thu, 08 November 2018, 11:35:23 »
I know a little late to the party, but are there any plans to do another group buy on this board?  I'd been trying to track it down after seeing it on the KBDFans site months ago and only recently managed to connect the dots.

Offline trikoi00

  • Posts: 77
  • Location: Singapore
  • GMK bias
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #66 on: Sat, 24 November 2018, 08:36:24 »
Just received mine out of the blue. Quality is good except for some minor streaking and chipped edge of the top bar. Really look very impressive IRL. The most Heavy 60% I have seen. The cable connector and LED need to solder onto PCB via jumper wire included.

Offline TieuNgu

  • Posts: 139
  • Location: US, AZ
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #67 on: Sat, 24 November 2018, 11:47:20 »
Just received mine out of the blue. Quality is good except for some minor streaking and chipped edge of the top bar. Really look very impressive IRL. The most Heavy 60% I have seen. The cable connector and LED need to solder onto PCB via jumper wire included.

Awesome! I just heard from OP that orders have been shipped as well. Expect to hear back from him about tracking #.

Offline TieuNgu

  • Posts: 139
  • Location: US, AZ
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #68 on: Wed, 28 November 2018, 00:22:23 »


Received today! What a beast :D

Offline mustcode

  • Posts: 74
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #69 on: Sun, 02 December 2018, 06:17:17 »
Still waiting for mine, hopefully it'll show up soon. Anyone else still waiting?

Offline swedishpiehole

  • Posts: 81
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #70 on: Thu, 06 December 2018, 21:19:20 »
Aaargh, I missed this GB. Are there extras that will be put up for sale?

Offline sanryu

  • Posts: 61
Re: 【GB】F62-PE Custom Keyboard
« Reply #71 on: Fri, 07 December 2018, 10:46:37 »
Some links I found:

http://www.geekmaker.com/index/Goods/goodsInfo/id/299/item_id/1800.html

https://deskthority.net/for-sale-f55/f62pe-custom-mechanical-keyboard-t19315.html

https://m.zfrontier.com/post/detail/4813

http://kbdlab.co.kr/index.php?document_srl=5250867&mid=board_Lsno50
Nice, thank you for sharing these.  :thumb:

Update: Looking at this pic
Show Image


Wondering why non standard 60 % PCB would not fit. Some of the mount points look very similar. Is this a change to the case for this run?
I have no problem buying a nice PCB with this case, just for future proofing it, having an option for replacement PCBs would we nice.

Oh! This is my picture.

Offline fer.real

  • Posts: 115
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #72 on: Sat, 08 December 2018, 12:21:28 »
Has anyone built and flashed the firmware for this board yet?  The PCB is a modified version of the DC60, I'm wondering if the existing QMK code will work with this board.

https://github.com/qmk/qmk_firmware/tree/master/keyboards/alf/dc60

Offline oldcat

  • Posts: 2061
  • Location: Arizona
  • 65% is Life
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #73 on: Sat, 08 December 2018, 18:51:24 »
Show Image


Received today! What a beast :D

Damn looking great

Offline DoCallMeKing

  • Posts: 46
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #74 on: Fri, 28 December 2018, 05:29:12 »
I have one of these for sale on mechmarket if anyone is looking to pick one up that missed out.

Offline beekey

  • Posts: 261
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #75 on: Thu, 10 January 2019, 15:01:31 »
Would also love to know which DC60 QMK we should use. The kbdfans one or the one from ALF?

Offline beekey

  • Posts: 261
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #76 on: Thu, 10 January 2019, 15:13:37 »
OK, I tried it and it is the ALF DC60: https://github.com/qmk/qmk_firmware/tree/master/keyboards/alf/dc60

Flashed the kbdfans firmware and it was dead. Luckily I was able to reflash with the ALF defaukt layout.  :D

Offline fer.real

  • Posts: 115
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #77 on: Thu, 10 January 2019, 15:36:55 »
OK, I tried it and it is the ALF DC60: https://github.com/qmk/qmk_firmware/tree/master/keyboards/alf/dc60

Flashed the kbdfans firmware and it was dead. Luckily I was able to reflash with the ALF defaukt layout.  :D

Even though the board says it's a DC60, the matrix isn't exactly the same as the alf/dc60.  There's an extra switch in R4 of the matrix to support a 2u left shift with arrows layout.  The extra switch gave me issues when trying to flash an ANSI 60% with split right shift layout.

I modified the QMK source and it works for me now.

Offline beekey

  • Posts: 261
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #78 on: Thu, 10 January 2019, 15:56:12 »
OK, I tried it and it is the ALF DC60: https://github.com/qmk/qmk_firmware/tree/master/keyboards/alf/dc60

Flashed the kbdfans firmware and it was dead. Luckily I was able to reflash with the ALF defaukt layout.  :D


Even though the board says it's a DC60, the matrix isn't exactly the same as the alf/dc60.  There's an extra switch in R4 of the matrix to support a 2u left shift with arrows layout.  The extra switch gave me issues when trying to flash an ANSI 60% with split right shift layout.

I modified the QMK source and it works for me now.
Found the same problem 5 minutes ago. If you want to do a split space layout you need to switch the K45 and K48 with the KC_NO next to these. My fork is here: https://github.com/jubecker/qmk_firmware/tree/feature/beekey_alf_dc60/keyboards/alf/dc60

Works now. :) (after patching, PCB was missing diodes and holes for ESC key where for LED pins, etc. not best quality IMHO)

Offline fer.real

  • Posts: 115
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #79 on: Thu, 10 January 2019, 16:01:38 »
OK, I tried it and it is the ALF DC60: https://github.com/qmk/qmk_firmware/tree/master/keyboards/alf/dc60

Flashed the kbdfans firmware and it was dead. Luckily I was able to reflash with the ALF defaukt layout.  :D


Even though the board says it's a DC60, the matrix isn't exactly the same as the alf/dc60.  There's an extra switch in R4 of the matrix to support a 2u left shift with arrows layout.  The extra switch gave me issues when trying to flash an ANSI 60% with split right shift layout.

I modified the QMK source and it works for me now.
Found the same problem 5 minutes ago. If you want to do a split space layout you need to switch the K45 and K48 with the KC_NO next to these. My fork is here: https://github.com/jubecker/qmk_firmware/tree/feature/beekey_alf_dc60/keyboards/alf/dc60

Works now. :) (after patching, PCB was missing diodes and holes for ESC key where for LED pins, etc. not best quality IMHO)

Not the best qualilty at all.  When I got my board, there was too much solder paste on the MCU and most of the pins were shorted.  I had to carefully remove the excess with some soldering wick before the board even worked.

Offline h3xadat

  • Posts: 52
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #80 on: Sun, 13 January 2019, 04:54:52 »
Aaargh, I missed this GB. Are there extras that will be put up for sale?

Missed this GB as well. Any news on extras? Or will there be a round 2?

Offline beekey

  • Posts: 261
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #81 on: Sun, 13 January 2019, 05:11:20 »
Aaargh, I missed this GB. Are there extras that will be put up for sale?

Missed this GB as well. Any news on extras? Or will there be a round 2?
They can't even send me the additional PCB I ordered with the case, so I would guess there is nothing extra.

Offline fer.real

  • Posts: 115
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #82 on: Sun, 13 January 2019, 06:15:21 »
Aaargh, I missed this GB. Are there extras that will be put up for sale?

Missed this GB as well. Any news on extras? Or will there be a round 2?
They can't even send me the additional PCB I ordered with the case, so I would guess there is nothing extra.

Good luck getting in touch with either the OP or Geekmaker.

Offline beekey

  • Posts: 261
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #83 on: Sun, 13 January 2019, 15:01:12 »
Aaargh, I missed this GB. Are there extras that will be put up for sale?

Missed this GB as well. Any news on extras? Or will there be a round 2?
They can't even send me the additional PCB I ordered with the case, so I would guess there is nothing extra.

Good luck getting in touch with either the OP or Geekmaker.
I was in contact, took more than a month to get to the conclusion that they don't have my ordered plates and additional PCP. At least I got a refund. So not real harm done.

The case is awesome, I really like it. Very well made. Rock solid and mine has no flaws, but PCB quality is crap.
Communication during the hole GB sucked. Others take a bigger interest in the people buying their high priced stuff. Would need an unbelievable beautiful case to make me join a Geekmaker GB again. This is an expensive hobby and should be fun, not frustration.
Just my 2c.

Offline mustcode

  • Posts: 74
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #84 on: Fri, 18 January 2019, 03:26:01 »
Well, I still haven't received mine... It is quite frustrating.

Offline fer.real

  • Posts: 115
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #85 on: Fri, 18 January 2019, 07:27:01 »
Well, I still haven't received mine... It is quite frustrating.

If you still have time, I would recommend opening a PayPal dispute.  That was the only way I could get any sort of response from Geekmaker.  You could also try emailing geekmaker.sy@foxmail.com.  That was the address that I got a response from. 


Offline fer.real

  • Posts: 115
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #86 on: Fri, 18 January 2019, 07:32:45 »
The case is awesome, I really like it. Very well made. Rock solid and mine has no flaws, but PCB quality is crap.
Communication during the hole GB sucked. Others take a bigger interest in the people buying their high priced stuff. Would need an unbelievable beautiful case to make me join a Geekmaker GB again. This is an expensive hobby and should be fun, not frustration.
Just my 2c.

I'm only meh on the case.  Mine has some small flaws in the anodization, otherwise I like it.  I agree that the PCB is complete crap; I would go so far as to call it amateur.

Geekmaker has been really poor about communication in their other group buys, too.  Just look at the Typewriter group buy going on.  I will definitely never join another Geekmaker GB again.

Offline mustcode

  • Posts: 74
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #87 on: Fri, 18 January 2019, 08:12:03 »
Well, I still haven't received mine... It is quite frustrating.

If you still have time, I would recommend opening a PayPal dispute.  That was the only way I could get any sort of response from Geekmaker.  You could also try emailing geekmaker.sy@foxmail.com.  That was the address that I got a response from.
Thanks for the suggestion. I did email him before and he has responded a couple of times but I still got no info about when my order will be shipped.

Offline beekey

  • Posts: 261
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #88 on: Fri, 18 January 2019, 09:59:49 »
Does USB-C to USB-C work for anybody? Got only A to C working.

Offline fer.real

  • Posts: 115
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #89 on: Fri, 18 January 2019, 10:22:20 »
Does USB-C to USB-C work for anybody? Got only A to C working.

I only have a USB-A to C cable.  But I have a USB-C to USB-C cable on order from Zap Cables, so I'm about to run into the same problem you have.

Offline fer.real

  • Posts: 115
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #90 on: Tue, 29 January 2019, 07:03:44 »
Does USB-C to USB-C work for anybody? Got only A to C working.

I only have a USB-A to C cable.  But I have a USB-C to USB-C cable on order from Zap Cables, so I'm about to run into the same problem you have.

I just got a USB-C to USB-C cable from Zap Cables and the board works fine with it.  The USB-C connector spec seems like kind of a cluster to me, is there a chance you're using the wrong type of USB-C to USB-C?

Offline beekey

  • Posts: 261
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #91 on: Tue, 29 January 2019, 10:12:35 »
Does USB-C to USB-C work for anybody? Got only A to C working.

I only have a USB-A to C cable.  But I have a USB-C to USB-C cable on order from Zap Cables, so I'm about to run into the same problem you have.

I just got a USB-C to USB-C cable from Zap Cables and the board works fine with it.  The USB-C connector spec seems like kind of a cluster to me, is there a chance you're using the wrong type of USB-C to USB-C?
Thanks for sharing. Good to know. I use the same cable with a Lets Split and it works. Will check my wiring in the case.

Offline mustcode

  • Posts: 74
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #92 on: Sun, 03 February 2019, 13:16:02 »
Well, I still haven't received mine... It is quite frustrating.

If you still have time, I would recommend opening a PayPal dispute.  That was the only way I could get any sort of response from Geekmaker.  You could also try emailing geekmaker.sy@foxmail.com.  That was the address that I got a response from.
Thanks for the suggestion. I did email him before and he has responded a couple of times but I still got no info about when my order will be shipped.

Finally received mine! Louis, a friend of ALF, emailed me and offered to send a white one with a brass plate upgrade instead since there was some QC issues with the black I ordered. Less than a week later, the package arrived. It is a really nice keyboard and I'm very happy with it :)

Offline fer.real

  • Posts: 115
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #93 on: Sun, 03 February 2019, 13:35:20 »
Finally received mine! Louis, a friend of ALF, emailed me and offered to send a white one with a brass plate upgrade instead since there was some QC issues with the black I ordered. Less than a week later, the package arrived. It is a really nice keyboard and I'm very happy with it :)

Good to hear that everything worked out!

Offline switchnollie

  • sleever supreme
  • * Exquisite Elder
  • Posts: 1338
  • Location: 白い帽子
  • greyhat co-leader
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #94 on: Sun, 03 February 2019, 14:45:52 »
Damn this is fresh, wish I'd seen it sooner.

Offline fer.real

  • Posts: 115
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #95 on: Tue, 05 February 2019, 20:23:35 »
Does anyone have an extra PCB that they're willing to let go of?  I've been playing around with QMK and want to make sure that all of the supported layouts work with my fork.

Offline Tohsh

  • Posts: 1
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #96 on: Sun, 07 July 2019, 03:25:02 »
Has anyone had any success with the LED daughter board? Sometimes mine is white, sometimes its red, but I can't seem to figure out how to program it to do anything...

Offline lukelex

  • Posts: 50
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #97 on: Thu, 01 August 2019, 13:47:11 »
Is this tray mount?

Sent from my SM-G975F using Tapatalk


Offline beekey

  • Posts: 261
Re: 【GB】F62-PE Custom Keyboard 8.2 invoice sent
« Reply #98 on: Fri, 02 August 2019, 01:39:59 »
Is this tray mount?

Sent from my SM-G975F using Tapatalk
Yes, it is. But not a standard 60% PCB, due to not enough space inside for the connector.