Author Topic: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (shipping estimate after CNY)  (Read 19752 times)

redhawke and 1 Guest are viewing this topic.

Online oldcat

  • Thread Starter
  • Posts: 891
Is building a customized keyboard science or art? Can we design a keyboard that is based on the precision of science for perfect utility, and the good principles of art for ideal aesthetics?

Meet Doro67, a masterpiece 65% customized mechanical keyboard combining science and art of keyboard design.










After rapidly testing 2 prototypes, we now proudly announce the Groupbuy for Doro67. 80ultraman, the designer of the BackProp Studio, takes this endeavor to heart, finetuning everything in this board hundreds of times to his standard of perfection. The making of Doro67 is the best case of practicing keyboard science, as every fine detail in the design has a scientific reasoning behind it. For example, the integrated 4mm plate allows for consistent typing feedback; and the low-profile front-end design allows for effortless typing with as well as without a wristrest. Whatís best, he has decided to offer multiple types of layouts for enthusiasts who like compatibility.

Compared with most customized keyboards on the market, Doro67's design allows cap profiles such as SA, MT3, and GMK to sit under the bezels, please see a side by side comparison of Doro67 with SA all R3 Rows with SKOG with GMK.



Doro67 has also benefited from the incorporation of feedback and ideas from you, community members. We have taken suggestions from you seriously, discussing the feasibility, and implementing as they add value to the project. Since we have released tons of details for the design concepts, prototypes, and early renders in the Geekhack Interest Check Page, here we will go directly to the details of this group buy.

       
Key Features:

1. 6061 Aluminum Case
2. 4mm Integrated Plate, 4 different Layouts (ISO, splits, blocker, etc.)
3. QMK PCB, with options for RGB LED PCB or Regular (Compatible) PCB, both PCBs designed to have switches facing south.
4. 8 degrees slope
5. USB-C (C2C) connector (cord not included)
6. 4 rubber feet included
7. Logo Engraving on the Bottom
8. Customized keyboard box
9. Designed by 80ULTRAMAN from the BackProp Studio (Gghi on Geekhack)
10. Manufactured by ALF

Pricing:

1. Default plate layout (minimal cuts with Blocker), colors, and PCB: $249
2. Special Color: Pearl White (a.k.a., Everest White): +$50
3. Customized Plates: ISO, Blocker Compatible, Non-blocker Compatible: +$20
4. Upgrade to RGB PCB (only available for default plate): +$15
5. Upgrade to Brass Bottom Slab: +$50
6. Additional Brass Bottom Slab: +$70
7. Pre-solder Services (with GMK screw-in stabilizers and 8 different switch options): + $55
8. Extra RGB PCB: $55
9. Extra multi-layout PCB: $40

Note: all prices exclude a 5% PayPal Fee/Exchange Fee, and shipping (SF Economy Express is our default courier - 4-6 business days Worldwide). To calculate shipping, please visit SF Shipping Calculator.

Color Options:



Integrate Plate Layout Options:




Expected Timeline
GB Starts: 9/7/2018, in Geekhack
GB ends on the designer 80Ultraman's birthday: 9/22/2018.

We expect to start shipping around 1.5 months after all payments are collected, depending on the number of orders we receive.

Join the Group Buy

To join the Group Buy, please fill out the following Google Form, and an invoice will be sent to you to confirm your spot.

Doro67 Group Buy Google Order Form

Check this Google Spreadsheet for your order details.

The updates will be sync'ed on Geekhack and ALF Discord.

Note: All images in this post are based on our actual prototypes.

Update from ALF (10/28/2018): current CNC/anodization completion estimated mid of December.

12/25: Merry Christmas! All CNC done and anodization in progress. 80 is going back to China in the next few days to handle the GB. Hopefully boards get shipped out in 3-4 weeks

« Last Edit: Mon, 21 January 2019, 23:31:12 by oldcat »
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline Photoelectric

  • * Administrator
  • Posts: 6678
  • AFK: Jan 18-26
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #1 on: Fri, 07 September 2018, 15:13:21 »
Approval bump.  As always, Caveat Emptor.
- Keyboards: LZ-GH (Jailhouse Blues)M65-a  ||  To be built: MIRA SE, E8-V1, MOON TKL
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #2 on: Fri, 07 September 2018, 15:15:15 »
Hi everyone, 80 here,

9.25 UPDATE: Payment Collected, Deposit Paid to ALF

You can check the orders here:

https://docs.google.com/spreadsheets/d/1Gvtz7gh2hRnw0u1vduaLifWRRc_tG3sOpt0f2FL6FFo/edit?usp=sharing


Thanks for the feedback! Very helpful!!

I will declare some less-important details and compromises here, you can skip this if you are not interested.

Check more pics here: https://imgur.com/a/r8NgDcN

Size: 335 ◊ 127 ◊ 33mm

Weight: 1.4kg / 3.1lb default alu case including PCB, switches and SA caps.

front height: 17mm (switches sit 2mm lower)



I put a lot effort to lower the overall height of this keyboard, make it lower than most custom and mass production keyboards. You can see from the picture, Doro with SA caps has the same height as Skog with GMK. I think this will give you a better experience if you prefer high-profile caps.


Layouts
I know a lot of you guys hate those "compatible plates", which full of holes make switches unstable. It is also important to me, I wanna the plate has a minimal cutout, make it clean and steady. As other layouts, since this is an integrated plate keyboard, fully customization will probably end up 10+ different version of the top case. That is not affordable. So, we decide to provide 4 top case versions.I realize this can't make everyone happy, but it is the best we can do.


PCB
After receiving some request for back-lighting, I added an in-switch RGB PCB cost extra $15. The RGB version only supports default layout. You can only choose Multi-compatible PCB if you prefer other layouts. All the switches of both PCBs are south-facing (led at the bottom). Both boards work with PCB mount-stabs (regular or screw).

Logo option:



The bottom IC shows that quite a few like the logo but seem to hate the text. I think it's weird simply remove the text. I decide to keep the logo as a default, if you hate it so much you can choose to not have it.

Box
The keyboard will come with a box. Here's a leak:



Rubber feet
The rubber feet will change to following in the final product. I will give some extra both black and grey.



Tolerance
The tolerance between caps and the top case will be smaller in the final product.



« Last Edit: Tue, 25 September 2018, 14:33:55 by Gghi »

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #3 on: Fri, 07 September 2018, 15:28:26 »
Reserved
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline azulyf

  • Posts: 51
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #4 on: Fri, 07 September 2018, 15:58:00 »
Already in!

Offline chouyu

  • Posts: 25
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #5 on: Fri, 07 September 2018, 16:03:43 »
Gee!

Offline Rubbermilitia

  • Posts: 138
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #6 on: Fri, 07 September 2018, 16:30:11 »
Already Joined ;)

Online dondongler

  • Posts: 34
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #7 on: Fri, 07 September 2018, 16:52:40 »
In for 1 :thumb:

Offline V. Vega

  • Posts: 32
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #8 on: Fri, 07 September 2018, 17:18:26 »
Joined already, so excited!

Offline Macflag

  • Posts: 22
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #9 on: Fri, 07 September 2018, 17:42:52 »
Purchased!

Offline Sup

  • Posts: 271
  • Location: Gateron
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #10 on: Fri, 07 September 2018, 18:49:47 »
Looks very nice and clean!
Thinking what i should do in the future - I no longer fear the scooter hitting my ankle Allure Clan

Offline prod

  • Posts: 53
  • Location: China
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #11 on: Fri, 07 September 2018, 22:04:40 »
Letís go, Doro!
Chicory|YDPv2(BLUP)|BLE40|Daisy|YDPM|YD40w|Golbat

Online ArchDill

  • Posts: 1004
  • Location: OK
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #12 on: Fri, 07 September 2018, 22:41:18 »
This is pretty rad!

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #13 on: Fri, 07 September 2018, 23:05:57 »
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline nasp

  • Posts: 100
  • Location: USA
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #14 on: Fri, 07 September 2018, 23:42:24 »
Joined and paid. Very excited for this one.

Offline pp

  • Posts: 4
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #15 on: Sat, 08 September 2018, 01:37:25 »
Wow, this is so nice, would like to join for one :thumb:

Offline rioc

  • Posts: 983
  • Location: such Place
  • Very Text - 键盘上瘾 ____rioc industries ink.
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #16 on: Sat, 08 September 2018, 04:20:39 »
oooh, this looks nice... might have to get one, still contemplating

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #17 on: Sat, 08 September 2018, 08:45:54 »
oooh, this looks nice... might have to get one, still contemplating


You have so many good boards it seems!
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline ghdrltjr1206

  • Posts: 1
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #18 on: Sat, 08 September 2018, 08:50:17 »
Is there any typing video of sample?

Offline nguyenhimself

  • Posts: 245
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #19 on: Sat, 08 September 2018, 11:05:08 »
Re. the Baby Blue case color, is it similar to the Rama M65-A's Tiffany?


Offline clik_clak

  • Posts: 140
  • Location: SLC, UT
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #20 on: Sat, 08 September 2018, 11:14:06 »
Re. the Baby Blue case color, is it similar to the Rama M65-A's Tiffany?

Show Image


No, it's nothing like that. It's a metallic blue. You can scroll up and look at the samples for an idea. It's the middle pic in the colors.

Offline 8six753o9

  • Posts: 36
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #21 on: Sat, 08 September 2018, 11:57:32 »
This is the one oldcat posted for the DC60 Cyan.





Sent from my iPhone using Tapatalk

Offline Lufenia

  • Posts: 6
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #22 on: Sat, 08 September 2018, 12:36:46 »
How heavy is the case with the brass bottom slab?

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #23 on: Sat, 08 September 2018, 12:47:43 »
Is there any typing video of sample?

Will make one in the next few days.

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #24 on: Sat, 08 September 2018, 12:53:41 »
How heavy is the case with the brass bottom slab?

for the brass slab, 2.1kg in total including PCB, switches, caps.

Online beekey

  • Posts: 160
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #25 on: Sat, 08 September 2018, 13:12:38 »
The split space support is only 2.75,1.25,2.2.25, right? No 2.25,1.25,2.2.75 split possible?

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #26 on: Sat, 08 September 2018, 14:52:03 »
The split space support is only 2.75,1.25,2.2.25, right? No 2.25,1.25,2.2.75 split possible?

Yes, 2.75 / 1.25 / 2.25. I think this makes more sense.

Offline dario

  • Posts: 217
  • Location: Croatia
  • obsessiveĖcompulsive hardware slut
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #27 on: Sat, 08 September 2018, 15:01:47 »

Integrate Plate Layout Options:

Show Image


I was planning on buying additional option for split backspace, however now when I look at your layout options it seems that split backspace is not actually two separate 1U holes, but instead something that seems to be derivative design from the default ANSI (just one giant 2U hole).

I'm not saying thid is necessarily a bad thing, it surely is cheaper to produce and thus available to a broader audiance, but I don't like having an open hole on the keyboard inbetween two switches for dust, dirt and maybe even liquid to come inside keyboard.

So, I wonder is there some kind of option where can I have just two 1U holes instead of default backspace, and if the answer is no, I'm just going to order regular ANSI.

Offline Marutks

  • Posts: 234
  • Location: London
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #28 on: Sat, 08 September 2018, 16:02:30 »
(just one giant 2U hole).

Shouldn't be a problem for plate this thick.   Zephyr also has "one giant 2U hole".    Wouldnt make any difference if you spill beer on your keeb.  :eek:

Offline tunadesu

  • Posts: 77
  • Location: MA
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #29 on: Sat, 08 September 2018, 16:54:06 »
Re. the Baby Blue case color, is it similar to the Rama M65-A's Tiffany?

Show Image


Ayy, thats my board! lol

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #30 on: Sat, 08 September 2018, 18:44:53 »
Re. the Baby Blue case color, is it similar to the Rama M65-A's Tiffany?

Show Image


This looks Matte? ALF's baby blue is not matte. And the Starfish pic is pretty spot on
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #31 on: Sat, 08 September 2018, 19:00:16 »
How heavy is the case with the brass bottom slab?

2.1 - 2.2kg in total (including PCB, switches, caps).

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #32 on: Sat, 08 September 2018, 19:04:32 »

Integrate Plate Layout Options:

Show Image


I was planning on buying additional option for split backspace, however now when I look at your layout options it seems that split backspace is not actually two separate 1U holes, but instead something that seems to be derivative design from the default ANSI (just one giant 2U hole).

I'm not saying thid is necessarily a bad thing, it surely is cheaper to produce and thus available to a broader audiance, but I don't like having an open hole on the keyboard inbetween two switches for dust, dirt and maybe even liquid to come inside keyboard.

So, I wonder is there some kind of option where can I have just two 1U holes instead of default backspace, and if the answer is no, I'm just going to order regular ANSI.

Sorry, the plate is integrated. I talk a big time to have 4 different cutouts. Like I said, this can't make everyone happy. if you wanna something less universal, you gonna take some extra holes on the plate.

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #33 on: Sat, 08 September 2018, 19:05:53 »
(just one giant 2U hole).

Shouldn't be a problem for plate this thick.   Zephyr also has "one giant 2U hole".    Wouldnt make any difference if you spill beer on your keeb.  :eek:

Haha. True ^-^

Offline Seoeunmonster

  • Posts: 2
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #34 on: Sat, 08 September 2018, 19:07:03 »
Can you show the pictures or renders of the brass bottom slab?

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #35 on: Sat, 08 September 2018, 22:18:17 »
Doro with GMK caps side profile:

203165-0


Doro with SA All R3 caps side profile:

203167-1

$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline PotatoTM

  • Posts: 150
  • Location: ON, Canada
  • ...
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #36 on: Sun, 09 September 2018, 01:20:17 »
Will you have a prototype of the RGB PCB before the end of this GB?

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #37 on: Sun, 09 September 2018, 09:41:26 »
Will you have a prototype of the RGB PCB before the end of this GB?

Guess itís possible - this will be compatible with all kinds of MX switches (not just rgb switches)

80 should have more information. @80ultraman
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #38 on: Sun, 09 September 2018, 11:02:12 »
Will you have a prototype of the RGB PCB before the end of this GB?

I made a prototype PCB before and fully tested but not matte black gold mask. RGB PCB will be made by my friend (a QMK contributor), so I don't think needs to have another PCB prototype.

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #39 on: Sun, 09 September 2018, 11:07:31 »
Can you show the pictures or renders of the brass bottom slab?

I asked a brass prototype from the factory. It's the same slab instead made of alu.

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #40 on: Sun, 09 September 2018, 11:35:41 »
Can you show the pictures or renders of the brass bottom slab?

I asked a brass prototype from the factory. It's the same slab instead made of brass.

Online OracleKev

  • Posts: 228
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #41 on: Sun, 09 September 2018, 20:54:10 »
Can you show the pictures or renders of the brass bottom slab?

I asked a brass prototype from the factory. It's the same slab instead made of alu.

Typing video with the brass slab would help me decide! Thanks for the GB, like the classic design, value and height!

Offline giangpn

  • Posts: 37
  • Location: the Moon
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #42 on: Sun, 09 September 2018, 23:37:14 »
man, I wish the soldering option offers R11 Zealios :(
I see dead people.


Offline ZyBeR

  • Posts: 36
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #44 on: Mon, 10 September 2018, 03:23:23 »
Can you show the pictures or renders of the brass bottom slab?

I asked a brass prototype from the factory. It's the same slab instead made of alu.

Typing video with the brass slab would help me decide! Thanks for the GB, like the classic design, value and height!
Agree, can that be posted before the GB ends?

Offline Marutks

  • Posts: 234
  • Location: London
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #45 on: Mon, 10 September 2018, 06:20:46 »
I am not sure If I want "Upgrade to Brass Bottom Slab".   

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #46 on: Mon, 10 September 2018, 09:45:04 »
Can you show the pictures or renders of the brass bottom slab?

I asked a brass prototype from the factory. It's the same slab instead made of alu.

Typing video with the brass slab would help me decide! Thanks for the GB, like the classic design, value and height!

Understand! The factory is making a brass sample. I am not sure if it can come before the end of the GB

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #47 on: Mon, 10 September 2018, 09:47:07 »
What's the height of the front side?

The front height is 17mm, and the switches sit a little bit lower (1.5mm).

Offline Marutks

  • Posts: 234
  • Location: London
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #48 on: Mon, 10 September 2018, 10:46:53 »
is Brass Bottom Slab better than aluminium one?

Offline stphung

  • Posts: 1
  • Location: US
    • q
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #49 on: Mon, 10 September 2018, 11:07:06 »
Love this...

Sent from my Pixel 2 XL using Tapatalk


Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #50 on: Mon, 10 September 2018, 11:55:53 »
is Brass Bottom Slab better than aluminium one?

They are the same but heavier. Other than that they should be the same.

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #51 on: Mon, 10 September 2018, 11:56:25 »
Love this...

Sent from my Pixel 2 XL using Tapatalk

Thanks!!

Online beekey

  • Posts: 160
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #52 on: Mon, 10 September 2018, 12:09:52 »
The split space support is only 2.75,1.25,2.2.25, right? No 2.25,1.25,2.2.75 split possible?

Yes, 2.75 / 1.25 / 2.25. I think this makes more sense.
I tried 2.75 / 1.25 / 2.25 with the BananaSplit and switched after one week to 2.25,1.25,2.2.75. For me much more comfortable, as I use the 2.25 as the Mac Cmd and the 1.25 as layer toggle with my left thumb.

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #53 on: Mon, 10 September 2018, 12:25:13 »
The split space support is only 2.75,1.25,2.2.25, right? No 2.25,1.25,2.2.75 split possible?

Yes, 2.75 / 1.25 / 2.25. I think this makes more sense.
I tried 2.75 / 1.25 / 2.25 with the BananaSplit and switched after one week to 2.25,1.25,2.2.75. For me much more comfortable, as I use the 2.25 as the Mac Cmd and the 1.25 as layer toggle with my left thumb.

Definitely make sense. but for me, I use my left thumb hit the spacebar, so I wanna that better a bit larger and right-er.
However, we have passed that IC phase. Let's just accept the spacebar the way it is.

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #54 on: Mon, 10 September 2018, 12:41:39 »
is Brass Bottom Slab better than aluminium one?

Just adding weights. Some love heavier boards I guess.
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline Rubbermilitia

  • Posts: 138
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #55 on: Mon, 10 September 2018, 12:46:47 »
Are most people going for blocker or no blocker? Just curious. I went blocker cause its easier to find caps for.

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #56 on: Mon, 10 September 2018, 13:00:21 »
Are most people going for blocker or no blocker? Just curious. I went blocker cause its easier to find caps for.

LOL .. only 4.2% of people went non-blocker

Offline dario

  • Posts: 217
  • Location: Croatia
  • obsessiveĖcompulsive hardware slut
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #57 on: Mon, 10 September 2018, 13:18:09 »
Doro with GMK caps side profile:

(Attachment Link)

Just a little detail I noticed. First prototype had camfered edges. Second prototype had rounded edges (if I'm not mistaken).

Now the final product has camfered edges again. I'm just curious to know was this intentional and is it because of production restrictions or is it because you think it looks better?
« Last Edit: Mon, 10 September 2018, 13:24:44 by dario »

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #58 on: Mon, 10 September 2018, 13:42:54 »
Doro with GMK caps side profile:

(Attachment Link)

Just a little detail I noticed. First prototype had camfered edges. Second prototype had rounded edges (if I'm not mistaken).

Now the final product has camfered edges again. I'm just curious to know was this intentional and is it because of production restrictions or is it because you think it looks better?

I dont see your point. The first and the second both have chamfered edges, the difference are the bezel and how much of the chamfered. The final product will have the same look with the second prototype(the ones in the pic).

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #59 on: Mon, 10 September 2018, 17:12:39 »
Are most people going for blocker or no blocker? Just curious. I went blocker cause its easier to find caps for.

Here is the current distribution of orders for different layouts.

203255-0
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline Marutks

  • Posts: 234
  • Location: London
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #60 on: Tue, 11 September 2018, 08:06:03 »
I can't decide which color to order.    Which color would look best with dev/tty keycaps ?   

https://www.massdrop.com/buy/massdrop-x-matt3o-devtty-custom-keycap-set


Offline lovetree

  • Posts: 138
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #61 on: Tue, 11 September 2018, 08:17:43 »
I can't decide which color to order.    Which color would look best with dev/tty keycaps ?   

https://www.massdrop.com/buy/massdrop-x-matt3o-devtty-custom-keycap-set

Black +1

Online OracleKev

  • Posts: 228
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #62 on: Tue, 11 September 2018, 08:55:11 »
If RGB PCB is chosen, is the RGB shown anywhere?

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #63 on: Tue, 11 September 2018, 09:17:19 »
If RGB PCB is chosen, is the RGB shown anywhere?

It's in-switch, per-key RGB, so the top side. :D

Online OracleKev

  • Posts: 228
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #64 on: Tue, 11 September 2018, 09:22:23 »
If RGB PCB is chosen, is the RGB shown anywhere?

It's in-switch, per-key RGB, so the top side. :D

Ah, in-switch RGB.  Are LEDs soldered on the PCB or soldered in holes (thus level with PCB surface).  In another words, am I restricted to use only RGB switches?

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #65 on: Tue, 11 September 2018, 09:25:43 »
If RGB PCB is chosen, is the RGB shown anywhere?

It's in-switch, per-key RGB, so the top side. :D

Ah, in-switch RGB.  Are LEDs soldered on the PCB or soldered in holes (thus level with PCB surface).  In another words, am I restricted to use only RGB switches?

You can use any MX-like switches. the leds are soldered in holes. :)

Online OracleKev

  • Posts: 228
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #66 on: Tue, 11 September 2018, 09:39:30 »
If RGB PCB is chosen, is the RGB shown anywhere?

It's in-switch, per-key RGB, so the top side. :D

Ah, in-switch RGB.  Are LEDs soldered on the PCB or soldered in holes (thus level with PCB surface).  In another words, am I restricted to use only RGB switches?

You can use any MX-like switches. the leds are soldered in holes. :)

Awesome!

Offline dario

  • Posts: 217
  • Location: Croatia
  • obsessiveĖcompulsive hardware slut
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #67 on: Tue, 11 September 2018, 11:40:06 »
I can't decide which color to order.    Which color would look best with dev/tty keycaps ?

https://www.massdrop.com/buy/massdrop-x-matt3o-devtty-custom-keycap-set

Everest white, obviously.

But you can take red as a cheaper alternative (and use red accents on dev titty).
« Last Edit: Tue, 11 September 2018, 11:43:01 by dario »

Online PoochZag

  • Posts: 38
  • Location: Indiana, US
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #68 on: Tue, 11 September 2018, 12:18:58 »
I can't decide which color to order.    Which color would look best with dev/tty keycaps ?   

https://www.massdrop.com/buy/massdrop-x-matt3o-devtty-custom-keycap-set

I think the pink and the grey/green are muted enough to go with a lot of different things.  I'm a big 9009 fan though so maybe that's where its coming from
TX-CP, TX60, Campine Mk. III, Mira SE

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #69 on: Tue, 11 September 2018, 12:31:05 »
google sheet has been updated. contact me if you wanna change your order or anything.

https://docs.google.com/spreadsheets/d/1Gvtz7gh2hRnw0u1vduaLifWRRc_tG3sOpt0f2FL6FFo/edit?usp=sharing

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #70 on: Tue, 11 September 2018, 15:40:18 »
I can't decide which color to order.    Which color would look best with dev/tty keycaps ?   

https://www.massdrop.com/buy/massdrop-x-matt3o-devtty-custom-keycap-set
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #71 on: Tue, 11 September 2018, 22:49:35 »
The switches on the GB page are very basic. if you wanna more premium switches, just PM me and talk about other options.

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #72 on: Tue, 11 September 2018, 23:59:04 »
The switches on the GB page are very basic. if you wanna more premium switches, just PM me and talk about other options.

Please, I want some Holy Pandas!
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline Poblopuablo

  • Posts: 36
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #73 on: Wed, 12 September 2018, 00:56:55 »
Are the pcb's north or south facing LEDs?

I imagine the rgb is north facing.... How about multilayout PCB?

Online OracleKev

  • Posts: 228
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #74 on: Wed, 12 September 2018, 01:02:33 »
Are the pcb's north or south facing LEDs?

I imagine the rgb is north facing.... How about multilayout PCB?

In the Features section
3. QMK PCB, with options for RGB LED PCB or Regular (Compatible) PCB, both PCBs designed to have switches facing south.

Online PoochZag

  • Posts: 38
  • Location: Indiana, US
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #75 on: Wed, 12 September 2018, 08:50:22 »
Are the pcb's north or south facing LEDs?

I imagine the rgb is north facing.... How about multilayout PCB?

I asked this in the IC thread and both PCBs are south facing.  Which is good for those of us who like cherry profile :)
TX-CP, TX60, Campine Mk. III, Mira SE

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #76 on: Wed, 12 September 2018, 10:56:18 »
weight (including pcb, switches and caps):
    3.1lb / 1.4kg for alu case
    4.6lb / 2.1kg if update to brass bottom slab.
« Last Edit: Wed, 12 September 2018, 10:59:11 by Gghi »

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #77 on: Wed, 12 September 2018, 15:05:25 »
Are the pcb's north or south facing LEDs?

I imagine the rgb is north facing.... How about multilayout PCB?

I asked this in the IC thread and both PCBs are south facing.  Which is good for those of us who like cherry profile :)

Yeah, I recall seeing the post about north facing cap hitting the switch casing.
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline Poblopuablo

  • Posts: 36
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #78 on: Wed, 12 September 2018, 17:43:33 »
Are the pcb's north or south facing LEDs?

I imagine the rgb is north facing.... How about multilayout PCB?

In the Features section
3. QMK PCB, with options for RGB LED PCB or Regular (Compatible) PCB, both PCBs designed to have switches facing south.

So how would shine through caps look on here?

If the led is sounth facing, then lighting for the legends on the caps would be way off. :/

Online OracleKev

  • Posts: 228
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #79 on: Wed, 12 September 2018, 22:38:14 »
Are the pcb's north or south facing LEDs?

I imagine the rgb is north facing.... How about multilayout PCB?

In the Features section
3. QMK PCB, with options for RGB LED PCB or Regular (Compatible) PCB, both PCBs designed to have switches facing south.

So how would shine through caps look on here?

If the led is sounth facing, then lighting for the legends on the caps would be way off. :/

Many consider shine through keycaps tacky.  Background lighting behind your favorite GMK or SA is preferred.  For those, south facing or north facing don't matter.

Offline Rubbermilitia

  • Posts: 138
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #80 on: Thu, 13 September 2018, 02:35:59 »
Are the pcb's north or south facing LEDs?

I imagine the rgb is north facing.... How about multilayout PCB?

In the Features section
3. QMK PCB, with options for RGB LED PCB or Regular (Compatible) PCB, both PCBs designed to have switches facing south.

So how would shine through caps look on here?

If the led is sounth facing, then lighting for the legends on the caps would be way off. :/

Many consider shine through keycaps tacky.  Background lighting behind your favorite GMK or SA is preferred.  For those, south facing or north facing don't matter.

You're stating preference as if it were fact. Yes, north-facing LEDs are better for shine through, which some people like, but this doesn't seem like the kind of board you would be using shine-through caps with anyway, considering it doesn't have a diffuser or acrylic bottom for backlighting either.

Online OracleKev

  • Posts: 228
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #81 on: Thu, 13 September 2018, 02:50:17 »
Are the pcb's north or south facing LEDs?

I imagine the rgb is north facing.... How about multilayout PCB?

In the Features section
3. QMK PCB, with options for RGB LED PCB or Regular (Compatible) PCB, both PCBs designed to have switches facing south.

So how would shine through caps look on here?

If the led is sounth facing, then lighting for the legends on the caps would be way off. :/

Many consider shine through keycaps tacky.  Background lighting behind your favorite GMK or SA is preferred.  For those, south facing or north facing don't matter.

You're stating preference as if it were fact. Yes, north-facing LEDs are better for shine through, which some people like, but this doesn't seem like the kind of board you would be using shine-through caps with anyway, considering it doesn't have a diffuser or acrylic bottom for backlighting either.

Wut, I don't know what you're picking on.
Anyway, south facing LED is fine.  north facing LED would interfere with Cherry height keycaps.

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #82 on: Thu, 13 September 2018, 11:19:28 »
I didn't know that north-facing switches may crack Cherry profile caps before. I choose south-facing simply because it's more nature and can help me reduce the overall height maybe 1mm.

Offline Marutks

  • Posts: 234
  • Location: London
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #83 on: Thu, 13 September 2018, 17:57:06 »
Cherry profile caps may have shorter travel distance on north-facing switches.
Usually home row keys. It happens for almost all switches.

Offline e2o

  • Posts: 2
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #84 on: Thu, 13 September 2018, 22:25:19 »
Hey! Can someone outline the possible downside(s) of getting the plate in ďmulti-blockerĒ (config 2) if Iím most likely going to use the default layout, but wouldnít mind the split space bar as an option? Would there be less stability in the switches in those areas? Would I have to use non-standard stabs if using the default layout with it? Any other concerns? Thanks for helping out a noob...

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #85 on: Fri, 14 September 2018, 00:09:00 »
I didn't know that north-facing switches may crack Cherry profile caps before. I choose south-facing simply because it's more nature and can help me reduce the overall height maybe 1mm.

Every mm counts!
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline Marutks

  • Posts: 234
  • Location: London
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #86 on: Fri, 14 September 2018, 06:30:56 »
Would there be less stability in the switches in those areas? Would I have to use non-standard stabs if using the default layout with it?

I wouldnt expect to have any stability issues.  Not with 4mm plate.   
standard stabs should be fine

Online PoochZag

  • Posts: 38
  • Location: Indiana, US
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #87 on: Fri, 14 September 2018, 06:56:10 »
I didn't know that north-facing switches may crack Cherry profile caps before. I choose south-facing simply because it's more nature and can help me reduce the overall height maybe 1mm.

It's not that they crack keycaps, but R3 and R4 of cherry profile caps will actually hit the housing on north facing switches just before it would normally bottom out.  This creates a different sound and feel and can be bothersome to those of us who are easily bothered :)  I am glad you went with south, I am super excited for the Doro!
TX-CP, TX60, Campine Mk. III, Mira SE

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #88 on: Fri, 14 September 2018, 10:20:11 »
Hey! Can someone outline the possible downside(s) of getting the plate in ďmulti-blockerĒ (config 2) if Iím most likely going to use the default layout, but wouldnít mind the split space bar as an option? Would there be less stability in the switches in those areas? Would I have to use non-standard stabs if using the default layout with it? Any other concerns? Thanks for helping out a noob...

Hi, the default layout is using the most common stabs and keycaps. the layout 2 support multiple layouts, like split backspace/spacebar, or 7u space bar, all of them are less common but easy to find.

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #89 on: Fri, 14 September 2018, 10:22:43 »
I didn't know that north-facing switches may crack Cherry profile caps before. I choose south-facing simply because it's more nature and can help me reduce the overall height maybe 1mm.

Every mm counts!

True. Did everything I can to lower the case. ;D

Offline Marutks

  • Posts: 234
  • Location: London
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #90 on: Fri, 14 September 2018, 10:34:50 »
can be bothersome to those of us who are easily bothered

It is very annoying.  I would never buy any keeb with north-facing switches.   

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #91 on: Fri, 14 September 2018, 11:28:52 »
can be bothersome to those of us who are easily bothered

It is very annoying.  I would never buy any keeb with north-facing switches.

Yea, great i went south.

Offline e2o

  • Posts: 2
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #92 on: Fri, 14 September 2018, 11:47:17 »
Hey! Can someone outline the possible downside(s) of getting the plate in ďmulti-blockerĒ (config 2) if Iím most likely going to use the default layout, but wouldnít mind the split space bar as an option? Would there be less stability in the switches in those areas? Would I have to use non-standard stabs if using the default layout with it? Any other concerns? Thanks for helping out a noob...

Hi, the default layout is using the most common stabs and keycaps. the layout 2 support multiple layouts, like split backspace/spacebar, or 7u space bar, all of them are less common but easy to find.

Thanks. And just to be absolutely sure, the multi-blocker #2 option will accommodate the default layout, correct?

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #93 on: Fri, 14 September 2018, 12:10:13 »
Hey! Can someone outline the possible downside(s) of getting the plate in ďmulti-blockerĒ (config 2) if Iím most likely going to use the default layout, but wouldnít mind the split space bar as an option? Would there be less stability in the switches in those areas? Would I have to use non-standard stabs if using the default layout with it? Any other concerns? Thanks for helping out a noob...

Hi, the default layout is using the most common stabs and keycaps. the layout 2 support multiple layouts, like split backspace/spacebar, or 7u space bar, all of them are less common but easy to find.

Thanks. And just to be absolutely sure, the multi-blocker #2 option will accommodate the default layout, correct?

Yes, that's correct!!

Offline mushubanane

  • Posts: 32
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #94 on: Fri, 14 September 2018, 12:35:33 »
All in for a classy black :thumb:

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard
« Reply #95 on: Fri, 14 September 2018, 14:48:20 »
All in for a classy black :thumb:

Thank you for joining!!

Offline Darknight00z

  • Posts: 441
  • Location: UK
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (last week!)
« Reply #96 on: Fri, 14 September 2018, 15:54:05 »
I wonder if I should get the Doro67 and purchase an extra pcb from rama koyu so I can get hotswap. hmm

Offline Macflag

  • Posts: 22
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (last week!)
« Reply #97 on: Fri, 14 September 2018, 16:17:18 »
Whatís the timeline for order shipment?


Sent from my iPhone using Tapatalk

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (last week!)
« Reply #98 on: Fri, 14 September 2018, 17:06:13 »
I wonder if I should get the Doro67 and purchase an extra pcb from rama koyu so I can get hotswap. hmm

you shouldn't. These two PCBs are not compatible (due to daughter-board design and bottom-row stabs direction).


Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (last week!)
« Reply #99 on: Fri, 14 September 2018, 17:08:17 »
Whatís the timeline for order shipment?


Sent from my iPhone using Tapatalk

1.5 to 2 months after collected all payments. That will be around mid/ end Nov.

Offline Macflag

  • Posts: 22
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (last week!)
« Reply #100 on: Fri, 14 September 2018, 17:20:27 »
Whatís the timeline for order shipment?


Sent from my iPhone using Tapatalk

1.5 to 2 months after collected all payments. That will be around mid/ end Nov.
Thank you!


Sent from my iPhone using Tapatalk

Offline Darknight00z

  • Posts: 441
  • Location: UK
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (last week!)
« Reply #101 on: Fri, 14 September 2018, 17:40:42 »
I wonder if I should get the Doro67 and purchase an extra pcb from rama koyu so I can get hotswap. hmm

you shouldn't. These two PCBs are not compatible (due to daughter-board design and bottom-row stabs direction).

Thanks for the heads up!

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (last week!)
« Reply #102 on: Sat, 15 September 2018, 09:55:10 »
I wonder if I should get the Doro67 and purchase an extra pcb from rama koyu so I can get hotswap. hmm

you shouldn't. These two PCBs are not compatible (due to daughter-board design and bottom-row stabs direction).

Thanks for the heads up!

No problem!!

Online neon_tom

  • Posts: 182
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (last week!)
« Reply #103 on: Sun, 16 September 2018, 10:52:17 »
google sheet has been updated. contact me if you wanna change your order or anything.

https://docs.google.com/spreadsheets/d/1Gvtz7gh2hRnw0u1vduaLifWRRc_tG3sOpt0f2FL6FFo/edit?usp=sharing

Hey Gghi, Iíve sent you a couple messages but no reply. Can you look into these:

1. I chose the logo on the bottom of the case but Iíd like to remove it
2. The spreadsheet says Iíve been invoiced but I definitely havenít.

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (last week!)
« Reply #104 on: Sun, 16 September 2018, 10:55:00 »
GB will end on the designer 80Ultraman's birthday: 9/22/2018   :-* :-* :-*
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (last week!)
« Reply #105 on: Sun, 16 September 2018, 13:39:53 »
google sheet has been updated. contact me if you wanna change your order or anything.

https://docs.google.com/spreadsheets/d/1Gvtz7gh2hRnw0u1vduaLifWRRc_tG3sOpt0f2FL6FFo/edit?usp=sharing

Hey Gghi, Iíve sent you a couple messages but no reply. Can you look into these:

1. I chose the logo on the bottom of the case but Iíd like to remove it
2. The spreadsheet says Iíve been invoiced but I definitely havenít.

Sorry for the late reply. I've changed your order and re-sent you an invoice.

Thank you for joining this!!

Online neon_tom

  • Posts: 182
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (last week!)
« Reply #106 on: Sun, 16 September 2018, 13:43:23 »
google sheet has been updated. contact me if you wanna change your order or anything.

https://docs.google.com/spreadsheets/d/1Gvtz7gh2hRnw0u1vduaLifWRRc_tG3sOpt0f2FL6FFo/edit?usp=sharing

Hey Gghi, Iíve sent you a couple messages but no reply. Can you look into these:

1. I chose the logo on the bottom of the case but Iíd like to remove it
2. The spreadsheet says Iíve been invoiced but I definitely havenít.

Sorry for the late reply. I've changed your order and re-sent you an invoice.

Thank you for joining this!!


No worries at all. Got the invoice now. Thanks!

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (last week!)
« Reply #107 on: Sun, 16 September 2018, 13:50:46 »
GB will end on the designer 80Ultraman's birthday: 9/22/2018   :-* :-* :-*

Yes, this will be a great birthday gift for myself. Very happy! :)

Offline lovetree

  • Posts: 138
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (last week!)
« Reply #108 on: Sun, 16 September 2018, 19:53:41 »
GB will end on the designer 80Ultraman's birthday: 9/22/2018   :-* :-* :-*

Yes, this will be a great birthday gift for myself. Very happy! :)

Happy birthday~  :p

Offline ItsAllen

  • Posts: 30
  • Location: I'm in Miami Beeetch
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (last week!)
« Reply #109 on: Sun, 16 September 2018, 22:25:09 »
About to fill out the form. This thing looks awesome. It'll be my first GB.
Lord Tachanka main

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (last week!)
« Reply #110 on: Mon, 17 September 2018, 09:19:30 »
GB will end on the designer 80Ultraman's birthday: 9/22/2018   :-* :-* :-*

Yes, this will be a great birthday gift for myself. Very happy! :)

Happy birthday~  :p

Thanks man! :D

Offline OmegaZero55

  • Posts: 11
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (last week!)
« Reply #111 on: Mon, 17 September 2018, 10:42:15 »
Why am I getting charged $73.50 extra listed as "Doro67 Order Change Extra" on the invoice? I didn't ask to change my order. I'm number 3 on the spreadsheet, and this is invoice 0073.

Looks like the invoice was canceled. Thanks!
« Last Edit: Mon, 17 September 2018, 11:28:03 by OmegaZero55 »

Online OracleKev

  • Posts: 228
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (last week!)
« Reply #112 on: Mon, 17 September 2018, 10:48:33 »
150 orders already... amazing  :thumb:
For multiple orders, how do you calculate shipping?

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (last week!)
« Reply #113 on: Mon, 17 September 2018, 11:31:18 »
Why am I getting charged $73.50 extra listed as "Doro67 Order Change Extra" on the invoice? I didn't ask to change my order. I'm number 3 on the spreadsheet, and this is invoice 0073.

Looks like the invoice was canceled. Thanks!

Sorry for the inconvenience, sent out the wrong invoices.
Canceled them now, didn't expand the excel, silly me!!


Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (last week!)
« Reply #114 on: Mon, 17 September 2018, 11:33:12 »
150 orders already... amazing  :thumb:
For multiple orders, how do you calculate shipping?

shipping invoice will be sent before actual shipping. Multiple orders (same PayPal and same address) will be shipped together.
« Last Edit: Mon, 17 September 2018, 12:06:37 by Gghi »

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (last week!)
« Reply #115 on: Tue, 18 September 2018, 12:34:55 »
For those didn't join our Discord channel, you can send me a message to change your order and plz leave your PayPal email.

Offline froydroyce

  • Posts: 25
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (last week!)
« Reply #116 on: Tue, 18 September 2018, 13:49:09 »
Iím torn between the titanium and the Everest white  :confused:

I wish I could see the titanium on the case

What do I dooooo

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (last week!)
« Reply #117 on: Tue, 18 September 2018, 15:05:40 »
Iím torn between the titanium and the Everest white  :confused:

I wish I could see the titanium on the case

What do I dooooo

My money is on Pearl White since this is not offered by any other manufacturer :)
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline moui

  • Posts: 2
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (last week!)
« Reply #118 on: Tue, 18 September 2018, 16:00:51 »
Already in!

Online ramblinrose

  • Posts: 50
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (last week!)
« Reply #119 on: Tue, 18 September 2018, 17:27:30 »
Yeah I couldn't resist the pearl white! Hoping it matches my SA camping set well.

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (last week!)
« Reply #120 on: Tue, 18 September 2018, 22:29:11 »
Yeah I couldn't resist the pearl white! Hoping it matches my SA camping set well.

Yeah, indeed. that looks pretty good

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (Ends in 3 days!)
« Reply #121 on: Wed, 19 September 2018, 15:30:17 »
ends in 3 days!
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (Ends in 3 days!)
« Reply #122 on: Fri, 21 September 2018, 01:47:15 »


A sample of PVD brass (ALF X3 brass weight)

Offline Rubbermilitia

  • Posts: 138
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (Ends in 3 days!)
« Reply #123 on: Fri, 21 September 2018, 02:49:41 »
Show Image


A sample of PVD brass (ALF X3 brass weight)

DAT BRASS

Offline constexpr

  • Posts: 66
  • Location: Serbia; UK

Offline lac29

  • Posts: 105
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (Ends in 3 days!)
« Reply #125 on: Fri, 21 September 2018, 08:29:58 »
One thing I wasn't sure of is if you picked Pearl White finish ... but then choose the brass PVD bottom (gold or black) ... I assume that just means the bottom will be brass with the Pearl White finish?

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (Ends in 3 days!)
« Reply #126 on: Fri, 21 September 2018, 09:47:32 »
One thing I wasn't sure of is if you picked Pearl White finish ... but then choose the brass PVD bottom (gold or black) ... I assume that just means the bottom will be brass with the Pearl White finish?
No, Pearl White finish is only for the alu case. The PVD for the brass bottom slab. All 11 colors are for the alu case(up & bottom) if you choose PVD slab, you will either "upgrade" alu slab to brass one or get an "addition" brass one.

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh

Offline lac29

  • Posts: 105
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (Ends in 3 days!)
« Reply #128 on: Fri, 21 September 2018, 13:08:29 »
I just got a second duplicate invoice after paying my invoice yesterday fyi. @Gghi

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (Ends in 3 days!)
« Reply #129 on: Fri, 21 September 2018, 16:09:46 »
I just got a second duplicate invoice after paying my invoice yesterday fyi. @Gghi

Sorry for the inconvenience. Made a mistake.
Canceled!
« Last Edit: Fri, 21 September 2018, 16:15:00 by Gghi »

Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (Ends midnight PDT 22nd)
« Reply #130 on: Fri, 21 September 2018, 17:06:12 »
Want to change a part of my order before I pay the invoice, should I email you directly or are you OK with PM instead?

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (Ends midnight PDT 22nd)
« Reply #131 on: Fri, 21 September 2018, 18:24:17 »
Want to change a part of my order before I pay the invoice, should I email you directly or are you OK with PM instead?

you can PM me or send me an email (angusdim@gmail.com).

Offline constexpr

  • Posts: 66
  • Location: Serbia; UK
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (Ends midnight PDT 22nd)
« Reply #132 on: Fri, 21 September 2018, 19:30:17 »
Hey guys, the GB has been extended for another day — it will end on Sept 22nd at 23:59 PDT.

Here's the updated countdown timer: https://www.timeanddate.com/countdown/taxday?iso=20180922T235959&p0=224&msg=Doro67+Group+Buy+ends+in&font=slab

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (Ends midnight PDT 22nd)
« Reply #133 on: Sat, 22 September 2018, 00:10:52 »
If you haven't decided what color to choose, give Pearl White a serious consideration. The quality of Pearl White is 1-2 stops higher than any regular anodization I have seen. Below are my Pearl White Canoes.

204112-0

204114-1

204116-2

204118-3
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (Ends tonight!)
« Reply #134 on: Sat, 22 September 2018, 09:51:49 »
GB ends tonight!
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (Ends tonight!)
« Reply #135 on: Sat, 22 September 2018, 12:30:15 »
The GB ends tonight!!
If you still interested in this board, now it's the time to pay the invoice/ change your order

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (Ends tonight!)
« Reply #136 on: Sat, 22 September 2018, 13:15:03 »
The GB ends tonight!!
If you still interested in this board, now it's the time to pay the invoice/ change your order

Yes the sooner payment are made to Alf, the sooner manufacturing can start. Letís try not to delay :)
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline Ksirb94

  • Posts: 1
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (Ends tonight!)
« Reply #137 on: Sat, 22 September 2018, 19:08:10 »
Just got in for 1. Need to pay though! So late to this that I hope I can still be a part!

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (Ends tonight!)
« Reply #138 on: Sat, 22 September 2018, 21:34:41 »
Just got in for 1. Need to pay though! So late to this that I hope I can still be a part!

Thanks for joining. :p

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (Ends tonight!)
« Reply #139 on: Sun, 23 September 2018, 00:59:49 »
Gonna get some sleep. Will Update spreadsheet/ send invoices/change orders in the morning.

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #140 on: Sun, 23 September 2018, 10:48:43 »
Thanks to everyone who joined this GB and made this a huge success!!!

For those who have not paid the invoices, please kindly do so ASAP so we can send payment to Alf to start manufacturing.

Also, happy birthday to our designer, 80ultraman!

$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline catfud

  • Posts: 13
  • Location: 🌴
  • I go by lkjl elsewhere
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #141 on: Sun, 23 September 2018, 12:38:23 »
Awesome, I am super excited :D

Happy birthday 80ultraman 🎉

Offline Audiobs

  • Posts: 39
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #142 on: Sun, 23 September 2018, 14:34:24 »
Happy Belated Birthday Ultraman! PMed you regarding the order. Been drooling in my dreams over this design since I saw the RAMA Koyu.

Please post more info regarding shippinng weight and size when they are available. I understand that multiple orders will be shipped together, and I am concered about their higher value declared value.  Depending on what can be done, will need to decide whether to ship each item individually.

Thanks and please advise.

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #143 on: Mon, 24 September 2018, 00:17:32 »
Awesome, I am super excited :D

Happy birthday 80ultraman 🎉
Thanks :D

Offline cmb5286

  • Posts: 15
  • Location: St. Louis
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #144 on: Mon, 24 September 2018, 07:30:31 »
If anyone wants to sell me their slot, please shoot me a message. Bummed I missed out on this.

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #145 on: Tue, 25 September 2018, 08:41:01 »
The GB has ended, all payment is collected. The deposit has been paid to ALF.

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #146 on: Tue, 25 September 2018, 13:12:27 »
The GB has ended, all payment is collected. The deposit has been paid to ALF.

Whooray!!!
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline lovetree

  • Posts: 138
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #147 on: Tue, 25 September 2018, 13:15:09 »
The GB has ended, all payment is collected. The deposit has been paid to ALF.

 :thumb: :thumb: :thumb:

Offline Audiobs

  • Posts: 39
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #148 on: Wed, 26 September 2018, 12:41:02 »
The GB has ended, all payment is collected. The deposit has been paid to ALF.


 :thumb:

Offline SifuSeafood

  • Posts: 5
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #149 on: Wed, 26 September 2018, 14:20:35 »
Can you give dimensions for the keyboard? Might get a sleeve for it.

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #150 on: Wed, 26 September 2018, 22:41:28 »
Can you give dimensions for the keyboard? Might get a sleeve for it.
Size: 335 ◊ 127 ◊ 33mm

Weight: 1.4kg / 3.1lb default alu case including PCB, switches and SA caps.

front height: 17mm (switches sit 2mm lower)

Offline SifuSeafood

  • Posts: 5
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #151 on: Thu, 27 September 2018, 11:10:52 »
Can you give dimensions for the keyboard? Might get a sleeve for it.
Size: 335 ◊ 127 ◊ 33mm

Weight: 1.4kg / 3.1lb default alu case including PCB, switches and SA caps.

front height: 17mm (switches sit 2mm lower)

Thanks!! Can't wait to get this board.

Offline Macflag

  • Posts: 22
[GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #152 on: Mon, 01 October 2018, 05:55:48 »
Selling Slot.
Default Layout, RGB PCB, additional Gold Weight in Silver.
PM for more details.

Another group buy I want to be a part of dropped a few months before I thought it would.

SLOT SOLD

Sent from my iPhone using Tapatalk
« Last Edit: Tue, 02 October 2018, 13:43:52 by Macflag »

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #153 on: Mon, 01 October 2018, 14:19:29 »
Selling Slot.
Default Layout, RGB PCB, additional Gold Weight in Silver.
PM for more details.

Another group buy I want to be a part of dropped a few months before I thought it would.


Sent from my iPhone using Tapatalk

Hey, might want to ask in Discord. A few people asked about not being able to join
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline Macflag

  • Posts: 22
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #154 on: Mon, 01 October 2018, 14:24:49 »
Selling Slot.
Default Layout, RGB PCB, additional Gold Weight in Silver.
PM for more details.

Another group buy I want to be a part of dropped a few months before I thought it would.


Sent from my iPhone using Tapatalk

Hey, might want to ask in Discord. A few people asked about not being able to join
Will do. Thank you!


Sent from my iPhone using Tapatalk

Offline Audiobs

  • Posts: 39
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #155 on: Tue, 02 October 2018, 08:50:42 »
Will there be extra PCB available? I ordered only the default layout and am thinking about changing or adding an extra. Thanks!

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #156 on: Tue, 02 October 2018, 11:27:22 »
Will there be extra PCB available? I ordered only the default layout and am thinking about changing or adding an extra. Thanks!

Yes send 80ultraman a DM on Discord if you are on there!
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline jupitard

  • Posts: 4
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #157 on: Tue, 02 October 2018, 14:42:25 »
i wonder if i can add a gold pvd bottom to my order, if not its cool.

Offline Gghi

  • Posts: 133
  • Location: Pittsburgh
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #158 on: Tue, 02 October 2018, 16:43:50 »
i wonder if i can add a gold pvd bottom to my order, if not its cool.

yeah, got few changing requests. Open change today and seal it tomorrow.

You can send me a message about the things you wanna change, and your paypal email

Offline Audiobs

  • Posts: 39
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #159 on: Wed, 03 October 2018, 20:52:28 »
Hi 80ultraman, sent you a PM yesterday regarding changes. Please let me know. Thanks!

Offline mrpetrov

  • Posts: 145
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #160 on: Tue, 09 October 2018, 13:19:38 »
Are there any open spots left or is anyone selling their slot still? Please PM me.

Offline skepticaljesus

  • Posts: 2
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #161 on: Tue, 09 October 2018, 15:02:50 »
If anyone's looking to sell their slot please let me know.

Offline digifiend

  • Posts: 148
  • Location: The OC, CA
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #162 on: Tue, 09 October 2018, 23:54:33 »
This looks great.  I sincerely hope tjere will be another round of this.
HHKB Pro 2 | KUL ES-87 | Varmilo VA87MR | Pok3r w/R1 Box Yellows (boo!) | RF87U 55g x2 | FC660M x2

Offline mikenogo

  • Posts: 83
  • Location: Canada, ON
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #163 on: Sat, 13 October 2018, 02:09:22 »
Things has changed for me financially and unfortunately Iím most likely going to sell my spot, I was the first few who ordered and paid. I ordered black with rgb pcb. If anyone is interested please pm me and we can sort this out with 80.  :'(

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #164 on: Sat, 13 October 2018, 14:21:31 »
Things has changed for me financially and unfortunately Iím most likely going to sell my spot, I was the first few who ordered and paid. I ordered black with rgb pcb. If anyone is interested please pm me and we can sort this out with 80.  :'(

There is someone in discord trying to buy a spot yesterday I think
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline Rubbermilitia

  • Posts: 138
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #165 on: Sat, 13 October 2018, 21:11:19 »
Things has changed for me financially and unfortunately Iím most likely going to sell my spot, I was the first few who ordered and paid. I ordered black with rgb pcb. If anyone is interested please pm me and we can sort this out with 80.  :'(

There is someone in discord trying to buy a spot yesterday I think

Yeah in the ALF Studio discord.. You can still see it its one of the latest messages..

Offline Audiobs

  • Posts: 39
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #166 on: Mon, 22 October 2018, 15:37:12 »
i wonder if i can add a gold pvd bottom to my order, if not its cool.

yeah, got few changing requests. Open change today and seal it tomorrow.

You can send me a message about the things you wanna change, and your paypal email

Hey 80Ultraman, I sent you a few PMs here and recently on Discord regarding my order since Oct 2 and haven't heard back from you. I understand you just got back from China and probably jetlagging, but please drop a note when you get a chance. I just want to confirm whether the change was made. It's fine either way. Thanks!

Offline Darknight00z

  • Posts: 441
  • Location: UK
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #167 on: Sat, 27 October 2018, 02:33:08 »
Mid Nov ship date hype!

Offline mrpetrov

  • Posts: 145
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #168 on: Mon, 29 October 2018, 22:44:37 »
December ship hype! Thanks to the two chaps who were able to sell me their slots.

Online ramblinrose

  • Posts: 50
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #169 on: Wed, 31 October 2018, 10:28:31 »
Looking to sell my spot in this GB - need to put the money elsewhere unfortunately.
It's a Pearl White one with the RGB PCB (standard layout). PM me if interested! (SOLD)
« Last Edit: Thu, 01 November 2018, 13:18:43 by ramblinrose »

Offline hokie_programmer

  • Posts: 8
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #170 on: Thu, 01 November 2018, 10:42:33 »
Looking to sell my spot in this GB - need to put the money elsewhere unfortunately.
It's a Pearl White one with the RGB PCB (standard layout). PM me if interested!

PM'd

Offline vonswoopington

  • Posts: 152
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #171 on: Thu, 01 November 2018, 13:53:38 »
Anyone willing to sell their spot?  Please PM me.  I'm looking for pearl white :)


Edit: Done
« Last Edit: Wed, 07 November 2018, 23:24:16 by vonswoopington »

Offline SifuSeafood

  • Posts: 5
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #172 on: Wed, 07 November 2018, 23:22:17 »
Anyone willing to sell their spot?  Please PM me.  I'm looking for pearl white :)

Were you still interested in buying a spot?

Default layout, RGB PCB, no extra PCB, black PVD, and logo.

You can double check the info on the order sheet!


Decided to keep!
« Last Edit: Thu, 15 November 2018, 19:18:02 by SifuSeafood »

Offline vonswoopington

  • Posts: 152
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #173 on: Wed, 07 November 2018, 23:24:29 »
Anyone willing to sell their spot?  Please PM me.  I'm looking for pearl white :)

Were you still interested in buying a spot?

Default layout, RGB PCB, no extra PCB, black PVD, and logo.

You can double check the info on the order sheet!

Sending DM

Offline froydroyce

  • Posts: 25
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #174 on: Sun, 11 November 2018, 04:08:09 »
Is it too late to upgrade to a brass bottom slab?

Offline mrpetrov

  • Posts: 145
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #175 on: Sun, 11 November 2018, 09:12:37 »
Quick question I wanted to confirm: in the default layout, is the space bar 6.25u or 7u? Thanks!

Online PoochZag

  • Posts: 38
  • Location: Indiana, US
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #176 on: Sun, 11 November 2018, 10:42:13 »
Quick question I wanted to confirm: in the default layout, is the space bar 6.25u or 7u? Thanks!

6.25
TX-CP, TX60, Campine Mk. III, Mira SE

Offline mrpetrov

  • Posts: 145
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #177 on: Wed, 14 November 2018, 16:23:41 »
i wonder why 80ultra hasnt shown any pics from his trip to the factory? maybe he didn't take any...or am i being too generous?

EDIT: update from doro discord - cases are in CNC right now and due to be with 80 ultra by 20 Dec, pics from discord below:
« Last Edit: Thu, 15 November 2018, 00:06:11 by mrpetrov »

Offline mrpetrov

  • Posts: 145
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #178 on: Thu, 15 November 2018, 00:06:36 »
Update from doro discord above ^.

Offline TheMilkmen

  • Posts: 14
  • Location: MD, USA
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #179 on: Wed, 28 November 2018, 19:32:36 »
WTS my doro spot, friend offered me a good deal on another board and I'd rather this go to someone who wants it.
Layout is the default, regular pcb, no logo, titanium grey color. pm me here for any inquiries. Thanks!

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #180 on: Sat, 01 December 2018, 20:04:28 »
Alf said his delivery date to 80 is end of December

* FEAE7AFD-5E9A-45A4-A6D4-60E91B997F54.MOV (258.49 kB - downloaded 26 times.)
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (GB ended, all invoices sent)
« Reply #181 on: Sat, 01 December 2018, 20:05:01 »
Update from doro discord above ^.

Thanks for the help my friend :)
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline Rykno

  • Posts: 93
  • Location: Where I want to be.
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (CNC in Progress)
« Reply #182 on: Tue, 25 December 2018, 19:30:30 »
WTS my slot: Black, Universal Layout + Spare PCB

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (CNC in Progress)
« Reply #183 on: Tue, 25 December 2018, 23:01:26 »
Major update:

80 is going back to China in the next few days to handle the GB. Hopefully boards get shipped out in 3-4 weeks
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (CNC in Progress)
« Reply #184 on: Tue, 25 December 2018, 23:05:49 »
Anodization in progress

209520-0

Grey:

* 28B6B3A9-4D36-43E8-AF0D-EB740B1243CC.MOV (621.59 kB - downloaded 23 times.)

Baby blue:

* 84266A69-C8E4-4A64-9745-6EB5602527F7.MOV (1055.7 kB - downloaded 20 times.)
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline Darknight00z

  • Posts: 441
  • Location: UK
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (CNC in Progress)
« Reply #185 on: Wed, 26 December 2018, 00:26:00 »
Alf said his delivery date to 80 is end of December

(Attachment Link)

Major update:

80 is going back to China in the next few days to handle the GB. Hopefully boards get shipped out in 3-4 weeks

lol.  :eek: :eek:

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (CNC in Progress)
« Reply #186 on: Wed, 26 December 2018, 11:50:28 »
Alf said his delivery date to 80 is end of December

(Attachment Link)

Major update:

80 is going back to China in the next few days to handle the GB. Hopefully boards get shipped out in 3-4 weeks

lol.  :eek: :eek:

Hey, working with about 300 boards is a major undertaking for an individual, let's try to be patient. I am sure 80 is trying hard to expedite this. In all fairness, if he had charged a higher price maybe he could have hired a person to do this for him.

Anyway, just a messenger here trying to help out. Doing this pro bono and not charging a cent from this GB.
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Online dondongler

  • Posts: 34
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (CNC in Progress)
« Reply #187 on: Fri, 11 January 2019, 11:51:10 »
Any updates on whether these will be shipped prior to CNY?

Offline Sic_Alpha

  • Posts: 15
  • Location: Texas
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (CNC/Ano done)
« Reply #188 on: Sun, 20 January 2019, 21:25:43 »
Gah! This is exactly what I'm looking for.  Another GB that I'm late to the party...  Any chance of an R2?

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (CNC in Progress)
« Reply #189 on: Sun, 20 January 2019, 22:03:34 »
Any updates on whether these will be shipped prior to CNY?

My estimate is it won't be. But we will see. Currently, 80 is shipping out the China private GB orders (that happened a month before the GH GB).
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (CNC/Ano done)
« Reply #190 on: Sun, 20 January 2019, 22:04:19 »
Gah! This is exactly what I'm looking for.  Another GB that I'm late to the party...  Any chance of an R2?

Check the Discord please, I believe mechmerlin in the discord is selling his spot.
There is currently no plan for R2.
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline Sic_Alpha

  • Posts: 15
  • Location: Texas
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (CNC/Ano done)
« Reply #191 on: Sun, 20 January 2019, 22:22:13 »
Check the Discord please, I believe mechmerlin in the discord is selling his spot.
There is currently no plan for R2.

Thanks, I'll look it up!  ;D

Offline Marutks

  • Posts: 234
  • Location: London
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (CNC in Progress)
« Reply #192 on: Mon, 21 January 2019, 05:09:19 »
Any updates on whether these will be shipped prior to CNY?

when are we going to get our boards?   April?

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (shipping soon)
« Reply #193 on: Mon, 21 January 2019, 23:18:48 »
Packaging has arrived. Waiting for further updates

211122-0

211124-1
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Online oldcat

  • Thread Starter
  • Posts: 891
Re: [GB] Doro67 - Integrated 4mm Plate 65% Keyboard (CNC in Progress)
« Reply #194 on: Mon, 21 January 2019, 23:32:21 »
Any updates on whether these will be shipped prior to CNY?

when are we going to get our boards?   April?

Unlikely before CNY, but things are going in the right direction I think
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2