Author Topic: [IC] GMK Mondrian Round 2 (additional Dox & Stagger Kit!) (Read 18126 times)

jebbra · « **on:** Mon, 22 October 2018, 05:39:14 »

Hello it's me jebbra again

Quite some people are asking about the continuity of Mondrian keyset and at the same time I wanna expand Mondrian so it can be used on another layout.

Brief Introduction
I created this keyset to overcome the infinite layout of custom keyboard—especially ortholinears—by using a thematic blank keys using coordinated accents.
The inspiration came from one of the most famous painting of humankind: Composition with Red, Blue and Yellow by Piet Mondrian.

Base Kit

Nothing is changed in Base Kit, I think it is already a solid kit

Now there are another 2 kits that I wanna add to this round: Dox to cover Ergodox and another similar layout (Broadwalk, Unigo66) and Stagger to cover standard keyboard.

Dox Kit

Because this kit intended to be used with Base Kit, the accent provided in this kit is quite minimal to press the price.

Stagger Kit

Personally I still want to cull the accent spacebars because they're already available on Originative and I believe their presence in this kit is adding a quite significant price hike.

Pricing
I haven't ask any quot to GMK for this round but last round was about €70 or around $90 for the base kit at 150 MOQ. Nowadays GMK quote is different, raised about 10-20% iirc. So take this info with a grain of salt.

Disclaimer
Of course the future of all the kits are depending on market interest. Round 1 is already hard enough so Round 2 will only happen if the demand really there (or there are vendors that brave enough to cover them). So please, fill the IC form to accurately gauge our interest

>>>> IC FORM <<<<

Render
From previous Round

Some Mondrian R1 in the wild

by Ryan George

by silentreader

by Bowoekren

by schylarker

And some other here: https://id.pinterest.com/spirouzi/gmk-mondrian/

To Do
– More render for new Kit
– Ask quotation
– Fixing vendor
– ? ? ? ?

All in all, have fun discussing them here!

>>>> IC FORM <<<<

itsundone · « **Reply #1 on:** Mon, 22 October 2018, 05:46:24 »

hyped!!!

AaronR · « **Reply #2 on:** Mon, 22 October 2018, 06:11:18 »

Dropping the accent Spacebars would be good to lower the price. But doing the base kit & stagger kit together might be a good idea too as they price for them together should be a lot better then them seperate

LightningXI · « **Reply #3 on:** Mon, 22 October 2018, 06:59:54 »

Drop all of the 6.25u/7u spacebars in the stagger kit and it should save a good deal in costs. I'd be in if the stagger kit happens.

Sent from my mobile using Tapatalk

equalunique · « **Reply #4 on:** Mon, 22 October 2018, 10:26:12 »

I'll go for all the kits

Sent from my LG-H918 using Tapatalk

Rumblehotep · « **Reply #5 on:** Mon, 22 October 2018, 12:17:22 »

Love this set, definitely in for a stagger kit!

young_won · « **Reply #6 on:** Tue, 23 October 2018, 00:59:20 »

i love this set. Thank you jebbra

dededecline · « **Reply #7 on:** Mon, 29 October 2018, 10:55:50 »

Would love to see this in a uniform profile with PBT, makes more sense to me anyways as a blanks kit, plus that allows for more flexible layouts. KAM would be my first choice but DSA or XDA would be great as well.

MikeTheTiger · « **Reply #8 on:** Mon, 29 October 2018, 11:27:14 »

Quote from: dklein on Mon, 29 October 2018, 10:55:50

Would love to see this in a uniform profile with PBT, makes more sense to me anyways as a blanks kit, plus that allows for more flexible layouts. KAM would be my first choice but DSA or XDA would be great as well.

I have the original set and I have to say, sometimes you gotta like the feel of different rows under your fingers. Especially when typing on blanks.

gabetjh · « **Reply #9 on:** Thu, 29 November 2018, 20:17:01 »

just filled up the IC form! looking forward to this! btw in regards to round 1 and round 2 the differences is just that round 2 can accept more layouts? but build wise all the same?

futurecrime · « **Reply #10 on:** Sat, 01 December 2018, 05:06:29 »

I really like this, and would like to get it, spacebars and all. But I wonder if it would be worth getting a quote from JTK as well? I could imagine mixing it with Red Riot and maybe other blank sets Puddsy plans on running. I'm a die hard GMK fan and am holding off judgement on JTK blanks until RR arrives but assuming it's all good it could be a wise alternative. Would certainly greatly improve the chances of hitting MOQ. GMK competition is fierce right now and blank sets are very niche.

oh_chesteroni · « **Reply #11 on:** Sun, 09 December 2018, 19:23:24 »

Quote from: futurecrime on Sat, 01 December 2018, 05:06:29

I really like this, and would like to get it, spacebars and all. But I wonder if it would be worth getting a quote from JTK as well? I could imagine mixing it with Red Riot and maybe other blank sets Puddsy plans on running. I'm a die hard GMK fan and am holding off judgement on JTK blanks until RR arrives but assuming it's all good it could be a wise alternative. Would certainly greatly improve the chances of hitting MOQ. GMK competition is fierce right now and blank sets are very niche.

This guy is smrt. I agree.

fireworm · « **Reply #12 on:** Sun, 09 December 2018, 20:59:43 »

You should also consider SA. SP told me 8-12 weeks for blanks, and their prices are reasonable...

See my gb if you are curious.

braidn · « **Reply #13 on:** Sun, 09 December 2018, 21:16:28 »

I love both the Dox and the base set. However, would love to see what JTK can deliver. Red Riot's images look pretty good and super affordable.

LightningXI · « **Reply #14 on:** Sun, 09 December 2018, 23:00:46 »

Quote from: fireworm on Sun, 09 December 2018, 20:59:43

You should also consider SA. SP told me 8-12 weeks for blanks, and their prices are reasonable...

See my gb if you are curious.

SP doesn't do thick ABS caps in Cherry profile like GMK or JTK does, unfortunately.

fireworm · « **Reply #15 on:** Sun, 09 December 2018, 23:12:02 »

Quote from: LightningXI on Sun, 09 December 2018, 23:00:46

Quote from: fireworm on Sun, 09 December 2018, 20:59:43
You should also consider SA. SP told me 8-12 weeks for blanks, and their prices are reasonable...

See my gb if you are curious.
SP doesn't do thick ABS caps in Cherry profile like GMK or JTK does, unfortunately.

Yea, I know, which is why I was suggesting SA profile.

I also asked, if I could run SA Blanks in Mondrian... No response yet though...

Pluto19 · « **Reply #16 on:** Mon, 10 December 2018, 23:30:31 »

Already have some Red Riot coming in, but would love some GMK blanks here

kennardsmith · « **Reply #17 on:** Wed, 12 December 2018, 21:59:18 »

I would be in for a couple of the base and stagger sets!

plexabyte · « **Reply #18 on:** Fri, 14 December 2018, 09:08:04 »

Yes yes yes yes.

If you could maybe add two more white r4 1.5u caps to the dox kit for boards like the Sol that have 5 1.5u mods that would be nice. Otherwise no complaints.

Poesjuh · « **Reply #19 on:** Fri, 14 December 2018, 12:05:50 »

I would like to have 2 more R4 1u's in case you want to go 1,5-1-1,5-7-same bottom row on a TKL. You obviously have 3 from the arrow cluster but no others. Basically 1u "windows" keys, except that they'r blank now

And since it's blank, I don't except a lot of extra cost.

Another suggestion would be split space support and a stepped "capslock".

So all together;
R3 stepped 1.75u
R4 1u x2
R4 2u
R4 2,25u
R4 2,75u

plexabyte · « **Reply #20 on:** Fri, 14 December 2018, 16:02:28 »

Have you thought about running this in PBT?

DJSwayde · « **Reply #21 on:** Fri, 14 December 2018, 16:31:48 »

Quote from: Poesjuh on Fri, 14 December 2018, 12:05:50

I would like to have 2 more R4 1u's in case you want to go 1,5-1-1,5-7-same bottom row on a TKL. You obviously have 3 from the arrow cluster but no others. Basically 1u "windows" keys, except that they'r blank now And since it's blank, I don't except a lot of extra cost.

Another suggestion would be split space support and a stepped "capslock".

So all together;
R3 stepped 1.75u
R4 1u x2
R4 2u
R4 2,25u
R4 2,75u

I also support the stepped Caps Lock idea.

forevermadrigal · « **Reply #22 on:** Sun, 23 December 2018, 10:31:23 »

Glwgb

Puddsy · « **Reply #23 on:** Sun, 23 December 2018, 11:41:45 »

I see blanks, I open my wallet

Also stepped caps or die

LightningXI · « **Reply #24 on:** Mon, 24 December 2018, 02:09:21 »

Quote from: Puddsy on Sun, 23 December 2018, 11:41:45

I see blanks, I open my wallet

Also stepped caps or die

Yes

jenggo · « **Reply #25 on:** Wed, 26 December 2018, 18:08:10 »

i'm in for stagger kit

Darknight00z · « **Reply #26 on:** Mon, 07 January 2019, 17:14:57 »

any updates?

tacahiroy · « **Reply #27 on:** Tue, 08 January 2019, 04:25:47 »

will definitely in this round!
Blank GMK + Ortho and ED support must be great.

colbs · « **Reply #28 on:** Wed, 09 January 2019, 17:41:32 »

In for base and ergodox for sure, thanks for working to bring out round 2!

Darknight00z · « **Reply #29 on:** Tue, 22 January 2019, 10:17:20 »

Updates?

Darknight00z · « **Reply #30 on:** Fri, 26 April 2019, 14:35:09 »

Tried to build the stagger kit in the current GMK blanks GB, but $200 for a R1 2u. I gtfo out of the spreadsheet so fast.

IOVERCALLHISTIOCYTES · « **Reply #31 on:** Fri, 26 April 2019, 15:14:44 »

dammit I thought there was some movement on this. I'd love to turn some of these caps into a giant macropad...

InvidiousIgnoramus · « **Reply #32 on:** Fri, 26 April 2019, 15:17:07 »

Huh, I never realized there was an IC for a second run. If this ever picks up again, i'm all for it! I've been wanting some more accents for mine, since I feel it could use a couple more. Would also help me get closer to having a full convex bottom row!

that stagger set would be able to give me the GMK blank set i've been wanting to have too, so double nice!

The_Royal · « **Reply #33 on:** Mon, 05 August 2019, 20:49:25 »

Can we please talk about this being on my desk by 2020 Lol

lamenthe · « **Reply #34 on:** Tue, 06 August 2019, 04:46:16 »

The concept behind this is freakin amazing. I wish I could justify a "for show" ortho just for this set.

equalunique · « **Reply #35 on:** Mon, 06 January 2020, 13:48:41 »

Is this IC dead or no?

Tyson · « **Reply #36 on:** Mon, 06 January 2020, 14:02:28 »

Quote from: equalunique on Mon, 06 January 2020, 13:48:41

Is this IC dead or no?

It's been awhile since his last post on GMK Blink, I'm worried about that keyset and this one too.

d00deitsnik · « **Reply #37 on:** Mon, 06 January 2020, 14:38:52 »

If this IC is still happening, a Mondrian deskpad would be a nice complementing piece! Not sure if there was one in r1.

Pluto19 · « **Reply #38 on:** Tue, 21 April 2020, 19:02:17 »

I likey. R2 would be nice nice pls

patcoll · « **Reply #39 on:** Tue, 17 November 2020, 19:51:52 »

Would join!

WhitePlate · « **Reply #40 on:** Fri, 20 November 2020, 01:06:33 »

I love it

WhitePlate · « **Reply #41 on:** Fri, 20 November 2020, 01:08:49 »

It'd be great if there were a short right shift too.

Unless there already is and I missed it

parablol · « **Reply #42 on:** Sat, 21 November 2020, 23:13:10 »

I have two from Round 1, and they're my favorite GMK set.

May Round 2 be a success!

ubmit · « **Reply #43 on:** Sun, 22 November 2020, 01:07:50 »

Stepped caps would be great!

News:

Author Topic: [IC] GMK Mondrian Round 2 (additional Dox & Stagger Kit!) (Read 18126 times)