Author Topic: [GB] SPACE65 (Shipping in progress)  (Read 49298 times)

beerafffe1 and 2 Guests are viewing this topic.

Online linkian209

  • Posts: 16
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #100 on: Fri, 04 January 2019, 10:51:17 »
My first group buy using geekhack. Do people recommend buying a second PCB?


Sent from my iPhone using Tapatalk

Offline beekey

  • Posts: 203
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #101 on: Fri, 04 January 2019, 10:54:45 »
My first group buy using geekhack. Do people recommend buying a second PCB?


Sent from my iPhone using Tapatalk
I would always do it for custom PCBs. Otherwise you might and with just a case. Accidents happen. Also resale is easier as people might want a untouched PCB.

Offline oldcat

  • Posts: 2052
  • Location: Arizona
  • 65% is Life
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #102 on: Fri, 04 January 2019, 11:33:43 »
My first group buy using geekhack. Do people recommend buying a second PCB?


Sent from my iPhone using Tapatalk

I'd always do it, get a second plate too, so you can build two basically (e.g., 1 linear board and 1 tactile board). I am going for CF default for holy pandas and brass for a good linear (tealios or tangerines).

Offline maximize

  • Posts: 70
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #103 on: Fri, 04 January 2019, 14:43:13 »
Will the badges say "Voyager 1" or "SPACE65"? Seems that the newest prototypes all say "Voyager 1", but if you could confirm, I'd appreciate it!

Offline oldcat

  • Posts: 2052
  • Location: Arizona
  • 65% is Life
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #104 on: Fri, 04 January 2019, 18:26:39 »
Will the badges say "Voyager 1" or "SPACE65"? Seems that the newest prototypes all say "Voyager 1", but if you could confirm, I'd appreciate it!

Discussion in discord shows it has changed to “voyager 1”

Offline ConfuseBill

  • Posts: 24
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #105 on: Sat, 05 January 2019, 06:24:38 »
So, this is the latest render for the plate, meaning the bottom part, not only supported by 3 screws, but also the plate get sandwich between the aluminum top & Bottom cover.
This looks better than previous render as attached.

One more question, how big is the gap between the lowest part of PCB bottom with the highest part of Bottom Alum cover.

Thanks.

Offline oldcat

  • Posts: 2052
  • Location: Arizona
  • 65% is Life
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #106 on: Sat, 05 January 2019, 10:31:23 »
So, this is the latest render for the plate, meaning the bottom part, not only supported by 3 screws, but also the plate get sandwich between the aluminum top & Bottom cover.
This looks better than previous render as attached.

One more question, how big is the gap between the lowest part of PCB bottom with the highest part of Bottom Alum cover.

Thanks.

Potter said clearance is 0.8mm between switch pin head and alu bottom covef

Offline ConfuseBill

  • Posts: 24
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #107 on: Sat, 05 January 2019, 20:21:11 »
So, this is the latest render for the plate, meaning the bottom part, not only supported by 3 screws, but also the plate get sandwich between the aluminum top & Bottom cover.
This looks better than previous render as attached.

One more question, how big is the gap between the lowest part of PCB bottom with the highest part of Bottom Alum cover.

Thanks.

Potter said clearance is 0.8mm between switch pin head and alu bottom covef

Great, it is a tight gap, so in case the plate got Flimsy. Can just add something underneath to fill the gap. Thanks @oldcat.

Offline oldcat

  • Posts: 2052
  • Location: Arizona
  • 65% is Life
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #108 on: Sat, 05 January 2019, 23:10:31 »
So, this is the latest render for the plate, meaning the bottom part, not only supported by 3 screws, but also the plate get sandwich between the aluminum top & Bottom cover.
This looks better than previous render as attached.

One more question, how big is the gap between the lowest part of PCB bottom with the highest part of Bottom Alum cover.

Thanks.


Potter said clearance is 0.8mm between switch pin head and alu bottom covef

Great, it is a tight gap, so in case the plate got Flimsy. Can just add something underneath to fill the gap. Thanks @oldcat.

NP, hope this helps. I haven’t used mill-max myself (not a big hotswap person), may try at some point :)

Offline AIRPOTTER

  • Thread Starter
  • Posts: 286
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #109 on: Sun, 06 January 2019, 04:59:32 »
Will the badges say "Voyager 1" or "SPACE65"? Seems that the newest prototypes all say "Voyager 1", but if you could confirm, I'd appreciate it!
Yes... indeed, now it's Voyager 1.

I cancelled the sign next to the side LED,and moved it to the nameplate. :)
INS:https://www.instagram.com/graystudio01/
discord:https://discord.gg/ckeXNRr
Reddit:Graystudio
imgur:graystudio01
slack:graystudio.slack.com

Offline beekey

  • Posts: 203
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #110 on: Sun, 06 January 2019, 12:37:00 »
Will the badges say "Voyager 1" or "SPACE65"? Seems that the newest prototypes all say "Voyager 1", but if you could confirm, I'd appreciate it!
Yes... indeed, now it's Voyager 1.

I cancelled the sign next to the side LED,and moved it to the nameplate. :)
All nameplates will be engraved? Any chance to get them without it? I like the clean look from the prototypes.

Offline famguy07

  • Posts: 5
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #111 on: Sun, 06 January 2019, 22:11:20 »
I am in the group buy under Reddit name famguy07. I would like to add a brass badge to my order. I have a message to you on Reddit saying the same thing. I don't want to pay the invoice until I get this sorted out.

Offline AIRPOTTER

  • Thread Starter
  • Posts: 286
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #112 on: Mon, 07 January 2019, 03:17:39 »
I am in the group buy under Reddit name famguy07. I would like to add a brass badge to my order. I have a message to you on Reddit saying the same thing. I don't want to pay the invoice until I get this sorted out.
Sorry, I'm late.

Invoice has been updated for you. :)

Thank you for choosing SPACE65.
INS:https://www.instagram.com/graystudio01/
discord:https://discord.gg/ckeXNRr
Reddit:Graystudio
imgur:graystudio01
slack:graystudio.slack.com

Offline mkarlsson

  • Posts: 328
  • Location: Spain
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #113 on: Mon, 07 January 2019, 05:08:07 »
Invoiced and paid.

Offline otanishock

  • Posts: 604
  • Location: Boston
  • コンパクトレイアウト
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #114 on: Mon, 07 January 2019, 05:52:18 »
Sorry, I'm late.

Invoice has been updated for you. :)

Thank you for choosing SPACE65.
Need to update my order. Send you a pm on discord :)!
Keycults and TGRs <2

Offline oldcat

  • Posts: 2052
  • Location: Arizona
  • 65% is Life
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #115 on: Mon, 07 January 2019, 19:49:11 »
I am in the group buy under Reddit name famguy07. I would like to add a brass badge to my order. I have a message to you on Reddit saying the same thing. I don't want to pay the invoice until I get this sorted out.

Hey, get in discord and send a PM to Potter!

Offline koduh

  • Posts: 105
  • Location: Arizona
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #116 on: Mon, 07 January 2019, 22:21:49 »
All paid up, looks like I am going to Space!

Offline happycamper87

  • Posts: 46
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #117 on: Tue, 08 January 2019, 05:41:45 »
Invoiced and paid! Now the waiting game begins...

Offline vewy_nice

  • Posts: 290
  • Location: NH, USA
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #118 on: Tue, 08 January 2019, 05:49:23 »
Are invoices rolling out over time? I still haven't gotten one.
I REALLY don't want to miss out on this! So I just want to make doubly sure I get my invoice ;)
PLEASE take my money!

Offline happycamper87

  • Posts: 46
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #119 on: Tue, 08 January 2019, 09:56:30 »
Are invoices rolling out over time? I still haven't gotten one.
I REALLY don't want to miss out on this! So I just want to make doubly sure I get my invoice ;)
PLEASE take my money!


Took a bit over a week to get mine if that makes you feel any better. :D

Offline oldcat

  • Posts: 2052
  • Location: Arizona
  • 65% is Life
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #120 on: Tue, 08 January 2019, 23:17:37 »
Are invoices rolling out over time? I still haven't gotten one.
I REALLY don't want to miss out on this! So I just want to make doubly sure I get my invoice ;)
PLEASE take my money!

Potter is sending out invoices everyday!

Offline beekey

  • Posts: 203
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #121 on: Wed, 09 January 2019, 00:15:41 »
Can one upgrade to brass plate? W/o getting a carbon fiber one also?

Can one upgrade to a brass badge? (W/o getting the included aluminum one also?)

Asking to keep price down since I wouldn't want carbon fiber or aluminum badge.

(Also asked on Reddit)
Second these questions.
Anybody knows this?

Offline AIRPOTTER

  • Thread Starter
  • Posts: 286
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #122 on: Wed, 09 January 2019, 02:40:28 »
Can one upgrade to brass plate? W/o getting a carbon fiber one also?

Can one upgrade to a brass badge? (W/o getting the included aluminum one also?)

Asking to keep price down since I wouldn't want carbon fiber or aluminum badge.

(Also asked on Reddit)
Second these questions.
Anybody knows this?
Sorry, my network has been out of order these days.
Brass parts can only be purchased extra. Doesn't appear as an upgrade.

Sorry again.
INS:https://www.instagram.com/graystudio01/
discord:https://discord.gg/ckeXNRr
Reddit:Graystudio
imgur:graystudio01
slack:graystudio.slack.com

Offline AIRPOTTER

  • Thread Starter
  • Posts: 286
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #123 on: Wed, 09 January 2019, 02:43:21 »
Are invoices rolling out over time? I still haven't gotten one.
I REALLY don't want to miss out on this! So I just want to make doubly sure I get my invoice ;)
PLEASE take my money!

Are invoices rolling out over time? I still haven't gotten one.
I REALLY don't want to miss out on this! So I just want to make doubly sure I get my invoice ;)
PLEASE take my money!


Took a bit over a week to get mine if that makes you feel any better. :D

Are invoices rolling out over time? I still haven't gotten one.
I REALLY don't want to miss out on this! So I just want to make doubly sure I get my invoice ;)
PLEASE take my money!
Sorry, my friends.

As a novice, I can only issue about 20 invoices a day (only more than 10 invoices a few days ago), so that you have been waiting for a long time, I'm really sorry.
INS:https://www.instagram.com/graystudio01/
discord:https://discord.gg/ckeXNRr
Reddit:Graystudio
imgur:graystudio01
slack:graystudio.slack.com

Offline AIRPOTTER

  • Thread Starter
  • Posts: 286
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #124 on: Wed, 09 January 2019, 02:46:48 »
Invoiced and paid! Now the waiting game begins...

All paid up, looks like I am going to Space!

Thks much.Please enjoy SPACE65!
INS:https://www.instagram.com/graystudio01/
discord:https://discord.gg/ckeXNRr
Reddit:Graystudio
imgur:graystudio01
slack:graystudio.slack.com

Offline F2F4

  • Posts: 18
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #125 on: Wed, 09 January 2019, 05:29:09 »
What is the badge color option?

Offline FSund

  • Posts: 134
  • Location: Norway
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #126 on: Wed, 09 January 2019, 06:00:03 »
Can one upgrade to brass plate? W/o getting a carbon fiber one also?

Can one upgrade to a brass badge? (W/o getting the included aluminum one also?)

Asking to keep price down since I wouldn't want carbon fiber or aluminum badge.

(Also asked on Reddit)
Second these questions.
Anybody knows this?
Sorry, my network has been out of order these days.
Brass parts can only be purchased extra. Doesn't appear as an upgrade.

Sorry again.

Don't worry my dude, it's fine. I fully understand the extra bookkeeping needed to do upgrades like these.

I ordered 2 red/red boards today. One for me, and one for a friend. Can't wait!

I'm thinking GMK Jamón might go well with the red case.
Join the Mechanical Keyboards Norway Discord server

Offline click clack jack

  • Posts: 45
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #127 on: Wed, 09 January 2019, 18:34:42 »
I've joined! So excited! I went grey and planning on DSA Milkshakes!

Now to decide switches 🤔🤔

Offline ConfuseBill

  • Posts: 24
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #128 on: Wed, 09 January 2019, 19:02:56 »
@airpotter can i suggest one more design alteration. The bottom rubber feet. Since this is custom, and we're gonna open and close this baby a lot. Is it possible that the rubber feet has it's own seat, rather than covering the screw holes. Believe the rubber feet will loose it's sticky/ glue if we open it alot.
 Thank you.

Offline Jaxxstatic

  • Posts: 234
  • Haptic Recon
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #129 on: Wed, 09 January 2019, 22:14:24 »
@airpotter can i suggest one more design alteration. The bottom rubber feet. Since this is custom, and we're gonna open and close this baby a lot. Is it possible that the rubber feet has it's own seat, rather than covering the screw holes. Believe the rubber feet will loose it's sticky/ glue if we open it alot.
 Thank you.
This. Yes. The rubber feet should not cover the screw holes, please.
Invoice paid, btw.

Offline oldcat

  • Posts: 2052
  • Location: Arizona
  • 65% is Life
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #130 on: Thu, 10 January 2019, 00:04:54 »
I've joined! So excited! I went grey and planning on DSA Milkshakes!

Now to decide switches 🤔🤔

DSA+ holy panda will sound real nice

Offline click clack jack

  • Posts: 45
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #131 on: Thu, 10 January 2019, 00:08:15 »
I've joined! So excited! I went grey and planning on DSA Milkshakes!

Now to decide switches 🤔🤔

DSA+ holy panda will sound real nice

Thanks for the suggestion my friend. I missed the massdrop GB, any place I can find those?

Online cijanzen

  • Posts: 365
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #132 on: Thu, 10 January 2019, 10:50:55 »
Please correct me if I'm wrong but I think I spotted an error in the hydrogen atom icon. Isn't the right side of the icon supposed to show the electron spinning in the opposition direction? As it is currently, the icon shows only one state instead of two states like the Voyager record cover.

Offline Mystogan

  • Posts: 7
  • Location: London, UK
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #133 on: Thu, 10 January 2019, 13:26:59 »
Nice catch! Yes, it's suppose to be like this:



Instead of what we have here:


Hopefully the engraving can still be rectified.

Offline Hedgey

  • Posts: 84
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #134 on: Thu, 10 January 2019, 15:40:59 »
Got my invoice last night and paid immediately.  Can't wait!!
"Resellers don't kill the community, auctioneers kill the community. Look at what happened to Diablo 3"

Offline Darknight00z

  • Posts: 592
  • Location: UK
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #135 on: Thu, 10 January 2019, 16:02:18 »
@airpotter can i suggest one more design alteration. The bottom rubber feet. Since this is custom, and we're gonna open and close this baby a lot. Is it possible that the rubber feet has it's own seat, rather than covering the screw holes. Believe the rubber feet will loose it's sticky/ glue if we open it alot.
 Thank you.
This. Yes. The rubber feet should not cover the screw holes, please.
Invoice paid, btw.

Can't believe this got overlooked during IC, I know its less pretty to show the screws, but for our tinkering sake, please move the rubber feet locations.

Offline oldcat

  • Posts: 2052
  • Location: Arizona
  • 65% is Life
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #136 on: Thu, 10 January 2019, 19:24:12 »
for those of you who would like to see how it looks with GMK caps:

210333-0

210335-1

Offline ConfuseBill

  • Posts: 24
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #137 on: Thu, 10 January 2019, 23:51:36 »
Finally, decided to join with Red/Red/Black. Just need to wait for my Invoice.

Offline cary

  • Posts: 5
  • Designer of DOLCH.CR
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #138 on: Fri, 11 January 2019, 01:50:48 »
牛逼,支持!建议送我一把! ;)

Offline AIRPOTTER

  • Thread Starter
  • Posts: 286
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #139 on: Fri, 11 January 2019, 03:14:57 »
Nice catch! Yes, it's suppose to be like this:

Show Image


Instead of what we have here:
Show Image


Hopefully the engraving can still be rectified.

Please correct me if I'm wrong but I think I spotted an error in the hydrogen atom icon. Isn't the right side of the icon supposed to show the electron spinning in the opposition direction? As it is currently, the icon shows only one state instead of two states like the Voyager record cover.
God, I made a mistake here. Thank you very much for your carefulness. I will correct this point in the final mass production version. Again, I apologize for my carelessness. Thank you for your kind correction.
« Last Edit: Fri, 11 January 2019, 03:38:01 by AIRPOTTER »
INS:https://www.instagram.com/graystudio01/
discord:https://discord.gg/ckeXNRr
Reddit:Graystudio
imgur:graystudio01
slack:graystudio.slack.com

Offline AIRPOTTER

  • Thread Starter
  • Posts: 286
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #140 on: Fri, 11 January 2019, 03:29:29 »
@airpotter can i suggest one more design alteration. The bottom rubber feet. Since this is custom, and we're gonna open and close this baby a lot. Is it possible that the rubber feet has it's own seat, rather than covering the screw holes. Believe the rubber feet will loose it's sticky/ glue if we open it alot.
 Thank you.
This. Yes. The rubber feet should not cover the screw holes, please.
Invoice paid, btw.

Can't believe this got overlooked during IC, I know its less pretty to show the screws, but for our tinkering sake, please move the rubber feet locations.
Well, in order to ensure the aesthetic appearance of the bottom case.

I specially covered the screw holes with footpads.

At the same time, the screw hole is just at the edge of the rubber feet.

I've tested it before, so it doesn't affect the removal of the screw.

Because it's easy to twist the screw if you just move the rubber foot a little bit.

INS:https://www.instagram.com/graystudio01/
discord:https://discord.gg/ckeXNRr
Reddit:Graystudio
imgur:graystudio01
slack:graystudio.slack.com

Offline AIRPOTTER

  • Thread Starter
  • Posts: 286
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #141 on: Fri, 11 January 2019, 03:33:29 »
牛逼,支持!建议送我一把! ;)
啊哈哈哈哈,C神好,多谢大佬支持啦! :D
« Last Edit: Fri, 11 January 2019, 03:38:30 by AIRPOTTER »
INS:https://www.instagram.com/graystudio01/
discord:https://discord.gg/ckeXNRr
Reddit:Graystudio
imgur:graystudio01
slack:graystudio.slack.com

Offline AIRPOTTER

  • Thread Starter
  • Posts: 286
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #142 on: Fri, 11 January 2019, 03:39:34 »
Finally, decided to join with Red/Red/Black. Just need to wait for my Invoice.
I'm sorry that the invoices I can issue every day are very limited. But I will deal with these things as soon as possible.
INS:https://www.instagram.com/graystudio01/
discord:https://discord.gg/ckeXNRr
Reddit:Graystudio
imgur:graystudio01
slack:graystudio.slack.com

Offline AIRPOTTER

  • Thread Starter
  • Posts: 286
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #143 on: Fri, 11 January 2019, 03:43:22 »
Will the badges say "Voyager 1" or "SPACE65"? Seems that the newest prototypes all say "Voyager 1", but if you could confirm, I'd appreciate it!
Yes... indeed, now it's Voyager 1.

I cancelled the sign next to the side LED,and moved it to the nameplate. :)
All nameplates will be engraved? Any chance to get them without it? I like the clean look from the prototypes.
Sorry,sir.I don't quite understand what you mean. Do you mean  there is no logo nameplate?
INS:https://www.instagram.com/graystudio01/
discord:https://discord.gg/ckeXNRr
Reddit:Graystudio
imgur:graystudio01
slack:graystudio.slack.com

Offline AIRPOTTER

  • Thread Starter
  • Posts: 286
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #144 on: Fri, 11 January 2019, 03:45:08 »
Can one upgrade to brass plate? W/o getting a carbon fiber one also?

Can one upgrade to a brass badge? (W/o getting the included aluminum one also?)

Asking to keep price down since I wouldn't want carbon fiber or aluminum badge.

(Also asked on Reddit)
Second these questions.
Anybody knows this?
Sorry, my network has been out of order these days.
Brass parts can only be purchased extra. Doesn't appear as an upgrade.

Sorry again.

Don't worry my dude, it's fine. I fully understand the extra bookkeeping needed to do upgrades like these.

I ordered 2 red/red boards today. One for me, and one for a friend. Can't wait!

I'm thinking GMK Jamón might go well with the red case.
My God, I can't see this reply until now.,after discord chat😂
INS:https://www.instagram.com/graystudio01/
discord:https://discord.gg/ckeXNRr
Reddit:Graystudio
imgur:graystudio01
slack:graystudio.slack.com

Offline AIRPOTTER

  • Thread Starter
  • Posts: 286
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #145 on: Fri, 11 January 2019, 03:46:45 »
All paid up, looks like I am going to Space!

Nice catch! Yes, it's suppose to be like this:

Show Image


Instead of what we have here:
Show Image


Hopefully the engraving can still be rectified.

Are invoices rolling out over time? I still haven't gotten one.
I REALLY don't want to miss out on this! So I just want to make doubly sure I get my invoice ;)
PLEASE take my money!

Invoiced and paid! Now the waiting game begins...

I've joined! So excited! I went grey and planning on DSA Milkshakes!

Now to decide switches 🤔🤔

Finally, decided to join with Red/Red/Black. Just need to wait for my Invoice.
Guys,thank you very much for your support!

INS:https://www.instagram.com/graystudio01/
discord:https://discord.gg/ckeXNRr
Reddit:Graystudio
imgur:graystudio01
slack:graystudio.slack.com

Offline AIRPOTTER

  • Thread Starter
  • Posts: 286
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #146 on: Fri, 11 January 2019, 03:47:36 »
What is the badge color option?
Black,gray,silver,red,and dark blue😁
INS:https://www.instagram.com/graystudio01/
discord:https://discord.gg/ckeXNRr
Reddit:Graystudio
imgur:graystudio01
slack:graystudio.slack.com

Offline ConfuseBill

  • Posts: 24
Re: [GB] SPACE65 | 65% Custom Keyboard
« Reply #147 on: Fri, 11 January 2019, 05:11:40 »
Finally, decided to join with Red/Red/Black. Just need to wait for my Invoice.
I'm sorry that the invoices I can issue every day are very limited. But I will deal with these things as soon as possible.

Ok, no problem. I'll wait. Thanks.

Offline oldcat

  • Posts: 2052
  • Location: Arizona
  • 65% is Life
Re: [GB] SPACE65 | 65% Custom Keyboard(last 3 days)
« Reply #148 on: Fri, 11 January 2019, 09:59:27 »
Here are some images of the Space65 with MT3:

210371-0

210373-1

Offline ccmpbll

  • Posts: 4
Re: [GB] SPACE65 | 65% Custom Keyboard(last 3 days)
« Reply #149 on: Fri, 11 January 2019, 10:00:42 »
I'm in! Grey on Grey with silver badge. Extra pcb, brass plate and brass badge. Can't wait! This is a great deal on a custom board!