Author Topic: [IC]TGR Alice plates (dead)  (Read 9528 times)

0 Members and 1 Guest are viewing this topic.

Offline distracteddev

  • Posts: 61
Re: [IC]TGR Alice plates (Probably polycarb)
« Reply #50 on: Tue, 04 December 2018, 01:29:46 »
Definitely in for this.

Could also go for some Polycarb wrist rests.

Anyone tried putting any sorbathane between the plate and PCB? Curious what that would do the acoustics.

Offline distracteddev

  • Posts: 61
Re: [IC]TGR Alice plates (Probably polycarb)
« Reply #51 on: Tue, 04 December 2018, 01:30:39 »
Ne alps avail?
Ne qmk avail?

Check out my latest post on the Alice GB thread for an update on QMK progress.

Offline Puddsy

  • nice
  • * Elated Elder
  • Thread Starter
  • Posts: 11453
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC]TGR Alice plates (Probably polycarb)
« Reply #52 on: Tue, 04 December 2018, 01:50:33 »
Ne alps avail?

missed this

no

Definitely in for this.

Could also go for some Polycarb wrist rests.

Anyone tried putting any sorbathane between the plate and PCB? Curious what that would do the acoustics.

no wrist rests here, sorry
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice

if you're actually reading other people's posts on geekhack in 2020 you're doing something wrong

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos

Offline Puddsy

  • nice
  • * Elated Elder
  • Thread Starter
  • Posts: 11453
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC]TGR Alice plates (Probably polycarb)
« Reply #53 on: Wed, 05 December 2018, 22:00:52 »
FYI, the GB for these will probably be in late January because I don't want to deal with it over winter break. I've had a rough year and I could use 5 weeks to just turn my brain off and watch TV/eat ramen.

Same as my last break, I'm easily reached (and prefer) via GH PM, discord/slack will be slower because I don't get those notifications on my phone, and I only check them every few days when I'm not at my main PC.
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice

if you're actually reading other people's posts on geekhack in 2020 you're doing something wrong

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos

Offline nastrovje

  • Posts: 143
Re: [IC]TGR Alice plates (Probably polycarb)
« Reply #54 on: Sat, 08 December 2018, 03:38:28 »
I'm in. Please ping me somewhere once it goes live  :-*

Offline Puddsy

  • nice
  • * Elated Elder
  • Thread Starter
  • Posts: 11453
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC]TGR Alice plates (Probably polycarb)
« Reply #55 on: Fri, 14 December 2018, 15:03:32 »
Quick update, waiting to hear back from one more place, and if that's no good GB will probably be sometime in late January, after Red Riot is done.

If the new place is no good, it's likely that the only option will be clear polycarb, which sucks since I really want to do carbon.
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice

if you're actually reading other people's posts on geekhack in 2020 you're doing something wrong

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8906
  • Location: The Windy City
Re: [IC]TGR Alice plates (Probably polycarb)
« Reply #56 on: Fri, 14 December 2018, 15:07:05 »
Can you include Jane v1?

Offline Puddsy

  • nice
  • * Elated Elder
  • Thread Starter
  • Posts: 11453
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC]TGR Alice plates (Probably polycarb)
« Reply #57 on: Fri, 14 December 2018, 15:17:30 »
Can you include Jane v1?

Don't think so, but I can send you the file for it if you'd like to investigate on your own.
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice

if you're actually reading other people's posts on geekhack in 2020 you're doing something wrong

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos

Offline idlemao

  • Posts: 133
  • Location: City of Angels
Re: [IC]TGR Alice plates (Probably polycarb)
« Reply #58 on: Tue, 18 December 2018, 19:32:54 »
Put in a form. A bit late but want to avoid the gnarly if I can

Offline Puddsy

  • nice
  • * Elated Elder
  • Thread Starter
  • Posts: 11453
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC]TGR Alice plates (Probably polycarb)
« Reply #59 on: Thu, 20 December 2018, 13:36:39 »
Quick update on the responses:

40 people for polycarb

15 for carbon (so that's probably not happening)

5 put alu in for "other"

and 2 for POM

so looking like polycarb only for now, but i'll still keep an eye out for a carbon manufacturer
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice

if you're actually reading other people's posts on geekhack in 2020 you're doing something wrong

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos

Offline bthezebra

  • Posts: 428
Re: [IC]TGR Alice plates (Probably polycarb)
« Reply #60 on: Thu, 20 December 2018, 14:37:50 »
Quick update on the responses:

40 people for polycarb

15 for carbon (so that's probably not happening)

5 put alu in for "other"

and 2 for POM

so looking like polycarb only for now, but i'll still keep an eye out for a carbon manufacturer
Sounds good will be following closely

Offline SBN

  • Posts: 134
Re: [IC]TGR Alice plates (Probably polycarb)
« Reply #61 on: Thu, 20 December 2018, 15:05:05 »
Quick update on the responses:

40 people for polycarb

15 for carbon (so that's probably not happening)

5 put alu in for "other"

and 2 for POM

so looking like polycarb only for now, but i'll still keep an eye out for a carbon manufacturer

Thanks for the effort Puddsy! Looking forward to a pc plate :)

Offline Puddsy

  • nice
  • * Elated Elder
  • Thread Starter
  • Posts: 11453
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC]TGR Alice plates (Probably polycarb)
« Reply #62 on: Wed, 02 January 2019, 00:07:38 »
Prototype to be ordered in the next few weeks just to make sure that the file works properly and the material is good.

GB once that's all confirmed.
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice

if you're actually reading other people's posts on geekhack in 2020 you're doing something wrong

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos

Offline futurecrime

  • Posts: 870
  • Location: London, England
  • Probably tired right now.
Re: [IC]TGR Alice plates (Probably polycarb)
« Reply #63 on: Wed, 02 January 2019, 04:03:18 »
Prototype to be ordered in the next few weeks just to make sure that the file works properly and the material is good.

GB once that's all confirmed.

Totally tubular

Offline SBN

  • Posts: 134
Re: [IC]TGR Alice plates (Probably polycarb)
« Reply #64 on: Wed, 02 January 2019, 05:53:44 »
Prototype to be ordered in the next few weeks just to make sure that the file works properly and the material is good.

GB once that's all confirmed.

Nice!! Keep us posted :)

Offline idlemao

  • Posts: 133
  • Location: City of Angels
Re: [IC]TGR Alice plates (Probably polycarb)
« Reply #65 on: Thu, 03 January 2019, 18:48:16 »
Prototype to be ordered in the next few weeks just to make sure that the file works properly and the material is good.

GB once that's all confirmed.
nice

Offline fireworm

  • Posts: 406
Re: [IC]TGR Alice plates (Probably polycarb)
« Reply #66 on: Thu, 03 January 2019, 19:07:07 »
Prototype to be ordered in the next few weeks just to make sure that the file works properly and the material is good.

GB once that's all confirmed.
nice
Nice.

Offline patch

  • Posts: 24
  • Location: Manila, PH
Re: [IC]TGR Alice plates (Probably polycarb)
« Reply #67 on: Thu, 03 January 2019, 19:11:39 »
Prototype to be ordered in the next few weeks just to make sure that the file works properly and the material is good.

GB once that's all confirmed.
nice
Nice.
Neeys
MX:
Aeboards Aegis (Silver) | Aeboards EXT65 (Black #3)
TGR Alice (Silver) | TGR Alice (Black) | TGR Jane V2 (Silver) | Keycult No2 SS (7/10) | Keycult No2 Brass #6 |

Topre:
HHKB Type-S (White) | HHKB Pro2 Hi-Pro(Black) | Norbaforce (Veracity Steel) | Monolith Heavy 6

Offline dantambok

  • Posts: 856
  • Location: Philippines
Re: [IC]TGR Alice plates (Probably polycarb)
« Reply #68 on: Thu, 03 January 2019, 19:53:23 »
V nice
Stuff  I have
More
2x TGR Alice / TGR 910 RE / TGR 910 CE / TGR 910 VKC / 2x TGR Jane V2 / 2x Matrix 2.0 / Matrix 2.2 / 2x Matrix 1.2OG / Lyn Whale v2 / Lyn EM7 v3 / DK Saver / Keycult No. 1/60 / Hachi / Kyuu / Duck Orion V2 / 3x TGRxSinga Unikorn / QXP / TX1800 V1 /  JER80 / TMO50 / 2x 86u / ION i69 / LZ MP / Rukia / 2x FMJ80 / TGR Jane V2 CE / UTD 360C / Matrix Project F / IDB60 / Matrix Noah / is0 

Coming soon --  MXSS / Modern M0110 / PC HBCP / Noxary 280S / Noxary XRF / LZ PhysiX / Keycult 1/60 rev1 / Lynx50 / Matrix 2.0 OG / 2x GSKT-00 / Duck Viper v3 / FLX Virgo / Noxary Vulcan Pro

40 ish sets and 30ish sets in GB

Offline distracteddev

  • Posts: 61
Re: [IC]TGR Alice plates (Probably polycarb)
« Reply #69 on: Wed, 09 January 2019, 17:23:00 »
In for at least 2.

Offline Puddsy

  • nice
  • * Elated Elder
  • Thread Starter
  • Posts: 11453
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC]TGR Alice plates (Probably polycarb)
« Reply #70 on: Sun, 27 January 2019, 13:02:10 »
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice

if you're actually reading other people's posts on geekhack in 2020 you're doing something wrong

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos