« previous next »
Pages:  [1]     Go Down

Author Topic: Model M Keys Suddenly Stop Working  (Read 1239 times)

0 Members and 1 Guest are viewing this topic.

Offline smarmar

  • Thread Starter
  • Posts: 317
  • Location: Orlando, FL
  • My other Dell Quiet Keys is a Model M
    • Short Stories from an Old Library
Model M Keys Suddenly Stop Working
« on: Thu, 07 February 2019, 17:44:19 »
I have a '92 Model M silver label which keys, one fateful day, stopped responding. Just 9 keys won't work. I've highlighted them in the image below. They don't seem to share a grid or sector but I could be wrong. I'm sure there are plenty of you GHers whom are way more knowledgeable than I in these matters. And that is why I ask this question of you, today.
Here's a list of the keys in question:
ESC
Caps Lock
Left Alt
G
H
'"
Up Arrow
Numpad 0
Numpad .
Logged
1992 IBM Model M | Tesoro Durandal[Browns] | Hi-Tek Series 725[Space Invaders] | Tandy Enhanced[Sliders] | Dell Quiet Keys | Mitsumi[AT]

Offline jim121049

  • Posts: 2
Re: Model M Keys Suddenly Stop Working
« Reply #1 on: Thu, 07 February 2019, 22:52:07 »
The keys you listed are all in the same row of the key matrix. If you're lucky, you have a dirty connection where the membrane plugs into the socket on the controller board that can be fixed by cleaning. If you're unlucky, you have a break in one of the conductive traces on the the membrane.
Logged

Offline smarmar

  • Thread Starter
  • Posts: 317
  • Location: Orlando, FL
  • My other Dell Quiet Keys is a Model M
    • Short Stories from an Old Library
Re: Model M Keys Suddenly Stop Working
« Reply #2 on: Sat, 09 February 2019, 13:43:58 »
Thanks for the tips! I diagnosed the problem to where the smaller ribbon connects to the pins. I tried carefully rubbing/cleaning the contacts, drawing new connective tissue with pencil lead, and then slicing a few millimeters off the end of the ribbon, all to no avail. I noticed that when the ribbon lays naturally flat the contacts pull away from the pins a little. I stuck a few thin layers of scotch tape to the back of the ribbon which made it a tighter connection but I was still getting intermittent key outages. I hacked a solution by putting a piece of cardboard between the ribbon and bottom tray which pushes the ribbon upright and, consequently, the contacts to the pins. It works but might not be a permanent solution. Down the road I might end up buying a new membrane and gulp perform a bolt mod. :-\
Logged
1992 IBM Model M | Tesoro Durandal[Browns] | Hi-Tek Series 725[Space Invaders] | Tandy Enhanced[Sliders] | Dell Quiet Keys | Mitsumi[AT]

Offline fohat.digs

  • * Elevated Elder
  • Posts: 6533
  • Location: 35°55'N, 83°53'W
  • weird funny old guy
Re: Model M Keys Suddenly Stop Working
« Reply #3 on: Sat, 09 February 2019, 13:48:14 »
A bolt mod is not really all that bad, just fussy and time-consuming.

I use DeOxit for cleaning stereo gear, if you had something like that it might be worth trying on your contacts.
Logged
"However, even though I was born in the Mesozoic, I do know what anyone who wants to reach out to young people should say: Billionaires took your money. They took your chance to buy a home. They took your chance at a good education. They stole your opportunities. Billionaires took the things you want in life. If you really want those things, you have to take them back.
That's the message. That's the whole message. Say that every day, not just to reach America's frustrated young white men, but people of every age, race, and gender.
Late-stage capitalism is a wealth-concentration engine, focused on vacuuming up every dollar and putting it in as few hands as possible. Republicans are helping that vacuum suck.
How does a tiny fraction of the population get away with this? They do it by dividing the other 99% of Americans against themselves."
- Marc Sumner 2025-05-30

Offline smarmar

  • Thread Starter
  • Posts: 317
  • Location: Orlando, FL
  • My other Dell Quiet Keys is a Model M
    • Short Stories from an Old Library
Re: Model M Keys Suddenly Stop Working
« Reply #4 on: Sat, 09 February 2019, 14:38:34 »
I use DeOxit on my stereo gear, as well. Great stuff. I didn't mention it but I used it on the ribbon contacts and pins to no affect.

I've been meaning to do a bolt mod on at least one of my MMs but I've always been afraid to potentially botch the job. I feel the time to make the leap is close at hand.
Logged
1992 IBM Model M | Tesoro Durandal[Browns] | Hi-Tek Series 725[Space Invaders] | Tandy Enhanced[Sliders] | Dell Quiet Keys | Mitsumi[AT]

Offline ThoughtArtist

  • Posts: 310
  • Location: A climate-controlled testing facility
Re: Model M Keys Suddenly Stop Working
« Reply #5 on: Sun, 10 February 2019, 13:41:07 »
It could make a good dumpster find for some kid
Logged
Pages:  [1]     Go Up
« previous next »