Author Topic: [WTS] stuff (Read 18880 times)

calvinhousecat · « **Reply #50 on:** Sat, 15 November 2014, 15:19:13 »

Interested in the numpad if still available.

RoflCopter4 · « **Reply #51 on:** Tue, 02 December 2014, 17:48:16 »

I shot you a PM a while back about the numpad but I didn't buy it then because I'm not quite sure what sort of Alps switches those might be. Does anyone have a guess? I can't imagine they'd be the complicated variant. Simplified white perhaps? Or maybe something even later?

IvanIvanovich · « **Reply #52 on:** Wed, 03 December 2014, 11:37:03 »

I would expect they are the original 'complicated' type as it is pretty old.

RoflCopter4 · « **Reply #53 on:** Wed, 03 December 2014, 12:34:18 »

Quote from: IvanIvanovich on Wed, 03 December 2014, 11:37:03

I would expect they are the original 'complicated' type as it is pretty old.

Do you know of any way to tell? Are they branded?

Altis · « **Reply #54 on:** Wed, 03 December 2014, 19:11:02 »

Hi, Shipping to Canada K2T 0H9 on the numpad please?

Thanks!

IvanIvanovich · « **Reply #55 on:** Wed, 03 December 2014, 19:35:16 »

Yes it does have the ALPS logo on the switch top underneath the slider, it's almost as wide as the slider. There is also some letter and number on the top corners and the number 50 inside the keycap mount on the slider. There are one big tab on each side. What any of that means I don't really know if anything.
Shipping to international would be $10 for the numpad.

jorgenslee · « **Reply #56 on:** Thu, 04 December 2014, 02:38:45 »

Interested in MX Revolution. PM incoming

RoflCopter4 · « **Reply #57 on:** Thu, 04 December 2014, 13:11:53 »

Quote from: IvanIvanovich on Wed, 03 December 2014, 19:35:16

Yes it does have the ALPS logo on the switch top underneath the slider, it's almost as wide as the slider. There is also some letter and number on the top corners and the number 50 inside the keycap mount on the slider. There are one big tab on each side. What any of that means I don't really know if anything.
Shipping to international would be $10 for the numpad.

Could you possibly post a better lit shot of the switches on the numpad? There are ways to tell, according to the deskthority wiki.

http://imgur.com/a/TvrI3

IvanIvanovich · « **Reply #58 on:** Thu, 04 December 2014, 14:57:26 »

Sorry no I can't right now. I don't own a digital camera and the one in my phone is hopeless. They look just like these if that is helpful:

RoflCopter4 · « **Reply #59 on:** Thu, 04 December 2014, 16:41:34 »

Quote from: IvanIvanovich on Thu, 04 December 2014, 14:57:26

Sorry no I can't right now. I don't own a digital camera and the one in my phone is hopeless. They look just like these if that is helpful:
Show Image

If they look like that then according to this page they are almost certainly the simplified switches.

http://deskthority.net/wiki/Alps_SKBL/SKBM_series

IvanIvanovich · « **Reply #60 on:** Fri, 05 December 2014, 13:04:32 »

~~Looking for x79 motherboard.~~ Found.

IvanIvanovich · « **Reply #61 on:** Wed, 17 December 2014, 15:26:53 »

Bump, items must go! I will take any reasonable offer.

Will be posting some Cherry boards (G80-1246, G80-2500, G80-3600, BXN5-C651) and more (keycaps, watercooling parts, PC parts, etc.) later as soon as I can get a hold of something that takes better pictures than my crummy phone. I stupidly over extended myself this month and need to do some recovery...

IvanIvanovich · « **Reply #62 on:** Mon, 22 December 2014, 07:00:52 »

Added stuff.

strict · « **Reply #63 on:** Mon, 22 December 2014, 07:17:43 »

Can you share any more details about the POM sets? Is it WKL? I'm interested in picking up some POM keys to try out but only if it can completely cover an ANSI 125 Filco or Phantom.

IvanIvanovich · « **Reply #64 on:** Mon, 22 December 2014, 07:28:38 »

G81 set have 1.25 key bottom row which is not MX compatible, or rather they have offset stem so the spacing of keys is not compatible.

DefeatedSky · « **Reply #65 on:** Mon, 22 December 2014, 11:21:11 »

Very interested in the rebel symbol and the red cherry novelty keys if you still have them!

IvanIvanovich · « **Reply #66 on:** Mon, 22 December 2014, 11:25:34 »

Yes still have rebel key, do not have red Cherry only brown, blue and black.

IvanIvanovich · « **Reply #67 on:** Fri, 26 December 2014, 11:57:39 »

dimmu · « **Reply #68 on:** Fri, 26 December 2014, 13:15:38 »

pm sent

Hak Foo · « **Reply #69 on:** Fri, 26 December 2014, 20:38:20 »

I'm interested in the Genovation numpad, shipped to 85213, USA. It seems like it's a prime candidate for a Teensy controller.

neverused · « **Reply #70 on:** Fri, 26 December 2014, 22:44:04 »

Are there any more of the Rebel Alliance, Blue Sun, or Japanese rising sun caps left?

renne · « **Reply #71 on:** Sat, 27 December 2014, 00:58:30 »

1 Joker key plz.

gamer179 · « **Reply #72 on:** Sat, 27 December 2014, 14:36:16 »

Any of the below still available? Interested if so
- 1x Blue Sun (blue on white background)
- 1x Japan rising sun
- 1x Vault boy
- 1x Yellow Esc

DanielT · « **Reply #73 on:** Sat, 27 December 2014, 15:17:21 »

2x Joker caps

IvanIvanovich · « **Reply #74 on:** Tue, 06 January 2015, 19:46:17 »

MGH · « **Reply #75 on:** Tue, 06 January 2015, 20:00:12 »

Whoops, looked through the thread and skimmed the beginning.

I have around 60 clear springs from when I modded a 60% to 62g clears. Let me check to make sure that there are 60.

I'n open to trade, especially for the black cherry, blue cherry (top row), and red star wars cap (bottom row)

If this is good, PM me to work out details

00zeRO · « **Reply #76 on:** Tue, 06 January 2015, 21:34:10 »

4 - Blue Blue Sun Keys
1 - Rising Sun Key Plz
Also interested in one of the POM sets. YGPM

pmh1410 · « **Reply #77 on:** Wed, 07 January 2015, 01:46:01 »

Ivan, I have many Clear stock springs, pm me your address, i can send you as a GIFTs

BRDs

pmh1410

IvanIvanovich · « **Reply #78 on:** Wed, 07 January 2015, 13:54:03 »

Thanks for the springs guys, I think I'll be all set now.

pmh1410 · « **Reply #79 on:** Thu, 08 January 2015, 07:53:54 »

Quote from: IvanIvanovich on Wed, 07 January 2015, 13:54:03

Thanks for the springs guys, I think I'll be all set now.

okie sir.

IvanIvanovich · « **Reply #80 on:** Wed, 21 January 2015, 12:48:17 »

Buy this stuff.

dimmu · « **Reply #81 on:** Wed, 21 January 2015, 13:49:46 »

ivan, i still haven't gotten my novelty keycaps.

IvanIvanovich · « **Reply #82 on:** Sat, 24 January 2015, 17:48:42 »

⇮⇮⇮⇮⇮

IvanIvanovich · « **Reply #83 on:** Thu, 30 April 2015, 14:16:31 »

⇮⇮⇮⇮⇮
Added some new stuff, more later.

Halverson · « **Reply #84 on:** Thu, 30 April 2015, 14:21:06 »

That slipmat! HNNGGG!

IvanIvanovich · « **Reply #85 on:** Sat, 02 May 2015, 10:56:31 »

Looking for some more Gaterons. Want all the linears to build a variable force board. I already have black and clear, so I am after some reds and yellows.

rsac · « **Reply #86 on:** Sat, 02 May 2015, 19:27:57 »

I'm interested in the DCS PTB dyesubs, row3 profile. How thick are them? Is it from an old terminal? And also in one of either the Razer Black Widow keycap set or the Cherry POM set. Razer is OEM profile and the Cherry is cherry profile, right? Do you have any spare key pullers?

Also, you should be looking for a better camera.

IvanIvanovich · « **Reply #87 on:** Sat, 02 May 2015, 19:34:52 »

DCS keys are thin, same as other DCS keycap available from Signature Plastics. Razer keycap is OEM profile. Cherry keycap is Cherry profile. I have a spare plastic pincher type keypuller I can toss in if you like if you buy any set.

I know, my phone is terrible taking pictures.

rsac · « **Reply #88 on:** Sun, 03 May 2015, 00:31:44 »

Ok, I will take the DCS PBT set and one of the Cherry POM sets. And I could also grab the $5 Razer set if it don't mess up with the shipping cost. Then I would have a pretty good variety of keycap types to try out. I haven't heard great things about plastic keypullers, but it is better than nothing I guess. You will send me a PM?

tuan2195 · « **Reply #89 on:** Sun, 03 May 2015, 00:52:49 »

PM'd about the DSA set, haven't seen you reply.

justify · « **Reply #90 on:** Sun, 03 May 2015, 11:42:18 »

Quote from: IvanIvanovich on Sat, 02 May 2015, 19:34:52

DCS keys are thin, same as other DCS keycap available from Signature Plastics. Razer keycap is OEM profile. Cherry keycap is Cherry profile. I have a spare plastic pincher type keypuller I can toss in if you like if you buy any set.

I know, my phone is terrible taking pictures.

I'm quite interested in the SSDs

IvanIvanovich · « **Reply #91 on:** Fri, 08 May 2015, 10:10:00 »

⇮⇮⇮⇮⇮

IvanIvanovich · « **Reply #92 on:** Thu, 14 May 2015, 10:39:27 »

⇮⇮⇮⇮⇮

IvanIvanovich · « **Reply #93 on:** Thu, 21 May 2015, 15:11:01 »

Added a bunch of stuff. MOVE IT OUT!
I will also entertain reasonable offers on any items.

tjweir · « **Reply #94 on:** Thu, 21 May 2015, 15:18:54 »

PM'd about adding a few items to my PCB order.

Thanks!

mun2912 · « **Reply #95 on:** Sat, 23 May 2015, 11:45:16 »

Quote from: tjweir on Thu, 21 May 2015, 15:18:54

PM'd about adding a few items to my PCB order.

Thanks!

interest in your 1976 set. please check your inbox

IvanIvanovich · « **Reply #96 on:** Sat, 23 May 2015, 11:49:33 »

1976 set won't be broken up to different buyers unless I can find buyers for all of the different parts.
I will also consider trades on that in exchange for Cherry set(s).

nifs · « **Reply #97 on:** Sat, 23 May 2015, 13:40:05 »

I'd like the lot of cherry mx clear keys, stems and springs you have.

PM me and we'll hook it up

filphil · « **Reply #98 on:** Sat, 23 May 2015, 14:37:07 »

Thanks Ivan!

Wannabe · « **Reply #99 on:** Sat, 23 May 2015, 18:49:40 »

I'm interested in the Death Star slipmat. Look forward to your PM.

News:

Author Topic: [WTS] stuff (Read 18880 times)