Author Topic: [FS] Nubbinator's Stuff: Wood Key Cap Pullers, Iron Man [W] Brobots V2, lots (Read 29502 times)

Dubsgalore · « **Reply #50 on:** Tue, 10 September 2013, 22:37:07 »

wood spacebar? ~ that's really cool
also, someone buy that poker case!

Binge · « **Reply #51 on:** Tue, 10 September 2013, 23:05:35 »

Quote from: nubbinator on Tue, 10 September 2013, 22:34:14

Quote from: Binge on Tue, 10 September 2013, 21:05:44
any update on dat ebony space-bar? preferably with pearl inlay?

I have to go to my wood supplier and look at their ebony and find something acceptable.

And I know you want the pearl inlay. I'll have to look around, but inlay is a b*tch.

if you can do a spade... just the playing card spade symbol on the right hand side either full, 3/4, 2/3, or 1/3 height of the face I would be more than happy.

asdfjkl36 · « **Reply #52 on:** Tue, 10 September 2013, 23:38:30 »

PMed for that turtle cap

Hellmark · « **Reply #53 on:** Wed, 11 September 2013, 15:08:03 »

Can you get an estimate on shipping to 63043 for the model M?

nubbinator · « **Reply #54 on:** Wed, 11 September 2013, 15:22:08 »

Quote from: Hellmark on Wed, 11 September 2013, 15:08:03

Can you get an estimate on shipping to 63043 for the model M?

It will likely be $14 Parcel Post, $15 Flat Rate Priority. My preference is Flat Rate since it's marginally more expensive, but shipped better.

nubbinator · « **Reply #55 on:** Thu, 12 September 2013, 16:47:58 »

Sold some stuff and added some stuff. I have a Poker/Pure case that's perfect for your upcoming GH60. Unlike most the other ones I've seen go up for sale, I'm including the M2 screws you need with the case.

I'll let you get one of the Wyse sets for half price if you buy the Model M, the wood space bar, or buy one of my key cap pullers aside from the $13 one.

And added novelty caps:

SpAmRaY · « **Reply #56 on:** Thu, 12 September 2013, 16:59:37 »

ygpm!

concept73 · « **Reply #57 on:** Mon, 16 September 2013, 15:13:21 »

Id like to buy these 4 caps please!

nubbinator · « **Reply #58 on:** Mon, 16 September 2013, 15:32:57 »

They have all been sold already. The only stuff available is the stuff in the OP.

turtle · « **Reply #59 on:** Wed, 18 September 2013, 08:04:32 »

nubbinator · « **Reply #60 on:** Thu, 26 September 2013, 20:56:51 »

Also willing to trade some of this stuff for a Phantom and Phantom plate.

Dubsgalore · « **Reply #61 on:** Thu, 26 September 2013, 20:58:38 »

Free bump for a cool dood
someone buy miami!

Pacifist · « **Reply #62 on:** Thu, 26 September 2013, 21:40:24 »

Do you still have novelty caps?

nubbinator · « **Reply #63 on:** Thu, 26 September 2013, 22:34:41 »

Quote from: Pacifist on Thu, 26 September 2013, 21:40:24

Do you still have novelty caps?

Nope, they're all sold.

hanschueng · « **Reply #64 on:** Fri, 27 September 2013, 07:59:46 »

MIAMI set still availlable?

nubbinator · « **Reply #65 on:** Fri, 27 September 2013, 11:17:21 »

Quote from: hanschueng on Fri, 27 September 2013, 07:59:46

MIAMI set still availlable?

It sure is.

chtzzrtr · « **Reply #66 on:** Wed, 02 October 2013, 00:26:51 »

Sent PM about buying Miami set if its still available.

nubbinator · « **Reply #67 on:** Wed, 02 October 2013, 18:51:50 »

Checking my Paypal when I get home, but Miami should be gone. The rest is still looking for a new home.

nubbinator · « **Reply #68 on:** Fri, 04 October 2013, 14:14:11 »

Miami is sold.

saturnotaku · « **Reply #69 on:** Thu, 10 October 2013, 13:16:47 »

Looks like you could beat someone to death with those keypullers then use the wire portion to rip their eyes right out of the socket.

nubbinator · « **Reply #70 on:** Fri, 11 October 2013, 15:40:34 »

Still have some free plates (for the cost of shipping) if someone wants to make their own direct wired keyboard:

rao2100 · « **Reply #71 on:** Tue, 15 October 2013, 09:00:53 »

Bought a usb cable and bloodwood cap puller. Received items in excellent condition and the items themselves are top notch.

Nubs even helped me to buy a sdl cable from ebay. What a great guy.

Thanks Nubs.

nubbinator · « **Reply #72 on:** Tue, 15 October 2013, 17:35:17 »

I managed to find a replacement screen housing and all the other parts for repairing my laptop for about $50 on eBay

So that means the finances aren't as thin as they were looking. As such, the Iron Man cap is more of a just seeing if someone is interested thing right now.

The other offers still stand though. Spend $25 and get a cable or cap puller for 30% off, spend $35 and get a free Wyse set or cable or puller at 30% off, spend $45 and get 30% off a cable or cap puller and a free Wyse set.

Quote from: rao2100 on Tue, 15 October 2013, 09:00:53

Bought a usb cable and bloodwood cap puller. Received items in excellent condition and the items themselves are top notch.

Nubs even helped me to buy a sdl cable from ebay. What a great guy.

Thanks Nubs.

Thanks for that endorsement. Glad to see those all got to you safely from your proxy. And if anyone here has any qualms about dealing with Rao, he was a fantastic buyer whom I would gladly sell to again.

nubbinator · « **Reply #73 on:** Thu, 17 October 2013, 15:53:14 »

Added something I'm looking for. And if you have a hardcore white clack, check my Clack trade thread. I may be enticed to add something from here into the deal.

nubbinator · « **Reply #74 on:** Fri, 18 October 2013, 18:27:32 »

If anyone has an extra CCnG 1.75x Shift, please let me know. It doesn't have to be pretty, so I'm open to SP rejects.

I'll also likely be adding some white switch covers soon too.

SpAmRaY · « **Reply #75 on:** Sat, 19 October 2013, 07:05:46 »

Quote from: nubbinator on Fri, 18 October 2013, 18:27:32

If anyone has an extra CCnG 1.75x Shift, please let me know. It doesn't have to be pretty, so I'm open to SP rejects.

I'll also likely be adding some white switch covers soon too.

I'll try to dig through some crap bag stuff and see if I have one.

nubbinator · « **Reply #76 on:** Sat, 19 October 2013, 12:49:56 »

Quote from: SpAmRaY on Sat, 19 October 2013, 07:05:46

Quote from: nubbinator on Fri, 18 October 2013, 18:27:32
If anyone has an extra CCnG 1.75x Shift, please let me know. It doesn't have to be pretty, so I'm open to SP rejects.

I'll also likely be adding some white switch covers soon too.

I'll try to dig through some crap bag stuff and see if I have one.

Thanks man.

nubbinator · « **Reply #77 on:** Mon, 28 October 2013, 18:59:08 »

SpAmRaY · « **Reply #78 on:** Mon, 28 October 2013, 20:02:04 »

All i found so far were big shifts

nubbinator · « **Reply #79 on:** Tue, 29 October 2013, 20:36:19 »

Wood 60% drop in cases incoming soon. There will be a Red Gum and Purpleheart with matched wrist wrest and keycap puller, Walnut and Padauk with matching keycap puller, and Walnut and Purpleheart with matching keycap puller.

Teaser shot:

Finish is Danish oil and will have the additional option paste wax for free or a small additional fee for Arm-R-Seal (polyurethane) finish. Just finishing the last little touches on them.

Quote from: SpAmRaY on Mon, 28 October 2013, 20:02:04

All i found so far were big shifts

Darn. If anyone has any short shifts (1.75x) I'm interested. Doesn't matter the color, I'd rather have more than I need than none that I need.

nubbinator · « **Reply #80 on:** Wed, 30 October 2013, 22:33:50 »

Did a bunch of key cap puller handles today that I should have up in the next couple of days. They're all glue ups, so they're more than just a simple color and have a nice contrasting stripe down the middle. There's Padauk and Black Palm, Padauk and Yellowheart, Curly Maple and Padauk (not my favorite), and Yellowheart and Black Palm. There's also a Walnut and Purpleheart, Red Gum and Purpleheart, and Walnut and Padauk, but those will be coupled with the cases when I put them up.

nubbinator · « **Reply #81 on:** Sun, 03 November 2013, 17:37:43 »

BTC caps and SP moogle have been sold.

I will be uploading pics of the new puller handles in the coming week and am working on a few more refinements on the cases before putting them up.

nubbinator · « **Reply #82 on:** Mon, 04 November 2013, 19:13:26 »

New key cap pullers added.

SpAmRaY · « **Reply #83 on:** Tue, 05 November 2013, 02:25:54 »

So Baller!

kenmai9 · « **Reply #84 on:** Tue, 05 November 2013, 02:28:05 »

GUYS! Nubbinator was kind enough to give me a free wooden keycap puller along with my purchase of a custom Poker case. Before I got this, I didn't think I would like it or need it, but after trying it and feeling the quality (especially of the metal he used) of the puller, it changed my mind completely. So people, buy these pullers. You'll burn your filco or WASD pullers.

antman4040 · « **Reply #85 on:** Tue, 05 November 2013, 06:57:14 »

just got my puller its awesome

nubbinator · « **Reply #86 on:** Tue, 05 November 2013, 10:46:21 »

Quote from: SpAmRaY on Tue, 05 November 2013, 02:25:54

So Baller!

Thanks. I wanted to do something a little different, so I decided to do some glue ups. The Black Palm and Padauk is probably my favorite of the bunch.

Quote from: kenmai9 on Tue, 05 November 2013, 02:28:05

GUYS! Nubbinator was kind enough to give me a free wooden keycap puller along with my purchase of a custom Poker case. Before I got this, I didn't think I would like it or need it, but after trying it and feeling the quality (especially of the metal he used) of the puller, it changed my mind completely. So people, buy these pullers. You'll burn your filco or WASD pullers.

Thanks! I do try to make a puller that I'd love, so it's all about getting the right spring steel and not using paper clips or anything silly like that. I actually stopped using my Techkeys and stock key cap puller after making mine. I just like the slight heft of them and the shape better.

Quote from: antman4040 on Tue, 05 November 2013, 06:57:14

just got my puller its awesome

Show Image

Glad you like it!

Puddsy · « **Reply #87 on:** Tue, 05 November 2013, 15:32:32 »

Quote from: nubbinator on Mon, 04 November 2013, 19:13:26

New key cap pullers added.

Show Image

Show Image

Show Image

Show Image

That last one is BEAUTIFUL. I expect it to go quickly.

GLWS!

nubbinator · « **Reply #88 on:** Tue, 05 November 2013, 15:54:17 »

Thanks. It really is my favorite of the bunch. Black palm is just sexy and the padauk is a nice contrast. Hopefully it goes quickly. To be honest, I've been making these more for myself lately since they're fun and relaxing to do. It just makes me happy when someone wants one and gets to enjoy it like I do.

nubbinator · « **Reply #89 on:** Thu, 07 November 2013, 11:44:13 »

In case you didn't know, everything I ship comes with a little toy. I've been searching for some fun, new, random little toys to include instead of or in addition to my current lot.

esoomenona · « **Reply #90 on:** Sat, 09 November 2013, 22:51:41 »

Quote from: nubbinator on Mon, 04 November 2013, 19:13:26

New key cap pullers added.

Show Image

Show Image

Show Image

Show Image

Do you have any lube for sale?

I'd like to get everything I need all at once if I'm to pick up one of these butt plugs with easy pull out wire handles.

Mod edit: user was warned for this post

esoomenona · « **Reply #91 on:** Sat, 09 November 2013, 23:56:42 »

Quote from: esoomenona on Sat, 09 November 2013, 22:51:41

Mod edit: user was warned for this post

tjcaustin · « **Reply #92 on:** Sun, 10 November 2013, 00:48:27 »

Quote from: esoomenona on Sat, 09 November 2013, 23:56:42

Quote from: esoomenona on Sat, 09 November 2013, 22:51:41
Mod edit: user was warned for this post

esoomenona · « **Reply #93 on:** Sun, 10 November 2013, 00:48:46 »

Quote from: tjcaustin on Sun, 10 November 2013, 00:48:27

Quote from: esoomenona on Sat, 09 November 2013, 23:56:42
Quote from: esoomenona on Sat, 09 November 2013, 22:51:41
Mod edit: user was warned for this post

Show Image

:eek:

edit: What the ****!? Who disabled my eek face?

nubbinator · « **Reply #94 on:** Mon, 11 November 2013, 17:50:05 »

Looking for CCnG Tsangan or short shift and star cap.

Also, if anyone has a GMK White on RGB set they'd be willing to trade for or sell for a fair price, please hit me up.

stoic-lemon · « **Reply #95 on:** Tue, 12 November 2013, 06:20:31 »

Hi there, can you tell me how much I'd have to pay for shipping one of those beautiful pullers to Japan and the UK?

nubbinator · « **Reply #96 on:** Tue, 12 November 2013, 09:46:24 »

Quote from: stoic-lemon on Tue, 12 November 2013, 06:20:31

Hi there, can you tell me how much I'd have to pay for shipping one of those beautiful pullers to Japan and the UK?

It depends on which one you wanted, if it's being shipped in a box or in a bubble mailer, and if it's tracked or untracked. Once you tell me those, I can calculate the shipping cost and tell you how much additional it will be.

stoic-lemon · « **Reply #97 on:** Tue, 12 November 2013, 22:22:41 »

I’m interested in the Pau Amarello and Black Palm and the Padauk and Black Palm. Probably best to ship to UK since I will be there at Christmas. Tracked bubble mailers if possible.

nubbinator · « **Reply #98 on:** Tue, 12 November 2013, 22:34:01 »

If I can fit them in a small flat rate box, it will be an additional $20. If you decide to forgo tracking, it looks like I can do it for $5 additional. If you can find cheaper shipping to the UK than USPS for something weighing 4 ounces (95g) I'm all ears.

stoic-lemon · « **Reply #99 on:** Tue, 12 November 2013, 23:19:46 »

Excellent. I will take those two then, in a small flat rate box if they fit. I will do without the tracking.

News:

Author Topic: [FS] Nubbinator's Stuff: Wood Key Cap Pullers, Iron Man [W] Brobots V2, lots (Read 29502 times)