Author Topic: How much was your 1st Mech Board?  (Read 10221 times)

0 Members and 1 Guest are viewing this topic.

Offline john08099

  • Velocifire MK
  • * Vendor
  • Thread Starter
  • Posts: 348
    • Mechanical keyboards for typers
Re: How much was your 1st Mech Board?
« Reply #50 on: Fri, 30 November 2018, 02:27:26 »
Poker II 85 Euro's
Do you like the keyboard?
Velocifire Website: https://www.velocifiretech.com/
Amazon: https://www.amazon.com/stores/node/16126150011
Artisan Keycaps: https://www.velocifiretech.com/keycaps/
E-mail: John@velocifiretech.com
Make Typing Better | Velocifire

Offline john08099

  • Velocifire MK
  • * Vendor
  • Thread Starter
  • Posts: 348
    • Mechanical keyboards for typers
Re: How much was your 1st Mech Board?
« Reply #51 on: Fri, 30 November 2018, 02:28:25 »
Velocifire Website: https://www.velocifiretech.com/
Amazon: https://www.amazon.com/stores/node/16126150011
Artisan Keycaps: https://www.velocifiretech.com/keycaps/
E-mail: John@velocifiretech.com
Make Typing Better | Velocifire

Offline john08099

  • Velocifire MK
  • * Vendor
  • Thread Starter
  • Posts: 348
    • Mechanical keyboards for typers
Re: How much was your 1st Mech Board?
« Reply #52 on: Fri, 30 November 2018, 02:37:48 »
ISO DE Model M...

60€ I believe...

maybe just 40?

Don't quite remember...

Haha, It's been a long time! :)
Velocifire Website: https://www.velocifiretech.com/
Amazon: https://www.amazon.com/stores/node/16126150011
Artisan Keycaps: https://www.velocifiretech.com/keycaps/
E-mail: John@velocifiretech.com
Make Typing Better | Velocifire

Offline diseeease

  • Posts: 10
Re: How much was your 1st Mech Board?
« Reply #53 on: Fri, 30 November 2018, 02:44:44 »
Only started this hobby a few weeks ago. First one was a lightly used Aukey KM-G6 with Outemu Blues for a whopping 15€. Followed up by a second one of these, NIB, for 20€.

My third is where things started to get serious - a Cherry G80-3000LGADE for 3€. And now I'm always hunting for more vintage boards and also just ordered the parts for my first DIY board on Aliexpress yesterday.

Offline whalematrontron

  • Posts: 70
  • Location: Australia
Re: How much was your 1st Mech Board?
« Reply #54 on: Fri, 30 November 2018, 02:56:44 »
It was a cooler master Pro S RGB with cherry blues, which was about 100 AUD I think. Great board, I still have it

Offline Cynamin

  • Posts: 10
Re: How much was your 1st Mech Board?
« Reply #55 on: Fri, 30 November 2018, 10:53:00 »
$70 for an opened razer blackwidow ultimate 2016 edition at bestbuy.
Ah, simpler times.

Offline NewbieOneKenobi

  • Posts: 628
Re: How much was your 1st Mech Board?
« Reply #56 on: Fri, 30 November 2018, 11:10:40 »
Model F and then Model M, not technically mechanical and yet the typically acknowledged father of all mechanical boards. ;) It's still not mine, actually.

Afterwards I can't really recall, but either those old Dell AT101/whatever boards with Alps at a couple bucks apiece, or Filco Majestouch 1 with Blues (can't recall the price, perhaps something to the tune of 120 euros/dollars/pounds). The Filco isn't ideal, but I always keep coming back to it, like that special kind of GF you just can't dump.

Offline Pitrek

  • Posts: 148
  • Location: Katowice, Poland
  • Mechfashion - premium apparel and sleeves
    • Mechfashion - premium apparel and sleeves
Re: How much was your 1st Mech Board?
« Reply #57 on: Sat, 01 December 2018, 16:42:31 »
Simple, CM Storm Quickfire TK with MX Blue switches. The start of addiction.   :p

Offline whiffysole

  • Posts: 16
Re: How much was your 1st Mech Board?
« Reply #58 on: Sat, 01 December 2018, 20:08:26 »
Mine was a used Razer Blackwidow 2014 I got off my friend for $40. This is what eventually lead me to discover the mechanical keyboard community and I fell in love.

Offline Ptolemy

  • Posts: 9
  • Location: Type Heaven
Re: How much was your 1st Mech Board?
« Reply #59 on: Mon, 03 December 2018, 10:48:03 »
My first true mech was a Razer Blackwidow  $150 :confused:

Now I've upgraded to much better things.  :thumb:
HHKB Pro 2
IBM Model M



Offline Hyperdimension

  • Posts: 27
  • Location: Belgium
Re: How much was your 1st Mech Board?
« Reply #60 on: Mon, 03 December 2018, 14:55:34 »
First one is a Ducky One TKL with Cherry MX Browns and ****ty ABS keycaps for 90Euros. Bought on 27 July 2016. Has terrible stabilizers and I puked on it while being ****faced on vodka last summer. Thankfully the only damage was my right arrow key. Now I have an Anne Pro 2 with a GMK set that costs twice as much as the keyboard itself, whoo!

Offline jamster

  • Posts: 1044
  • Location: Asia
Re: How much was your 1st Mech Board?
« Reply #61 on: Mon, 03 December 2018, 22:48:57 »
Free, Model M.
Wow! So lucky!

You can just use the Multiquote option instead of rapid-firing a bunch of separate one liner replies to separate posts. Makes for an easier to read thread.

Offline ArchDill

  • * Esteemed Elder
  • Posts: 1309
  • Location: OK
Re: How much was your 1st Mech Board?
« Reply #62 on: Mon, 03 December 2018, 22:50:22 »
I think my first board was a logitech. I paid like $130ish iirc

It went up from there...

Offline jcoffin1981

  • Posts: 801
Re: How much was your 1st Mech Board?
« Reply #63 on: Tue, 11 December 2018, 03:59:30 »
Cherry MX 2.0, pain $99.  I ultimately left it at work to use cuz I couldn't stand the full size board, though I liked the profile of the keys.
KPB V60 Gateron Browns and Leopold Keycaps.  Poker 3 with Gateron Browns and Poker keycaps.  Poker 3 with Cherry MX Browns, ABS keycaps and white LED's.

Leopold FC660M- my new favorite, right out of the box.

Offline Merranza

  • Posts: 127
Re: How much was your 1st Mech Board?
« Reply #64 on: Tue, 11 December 2018, 08:20:31 »
First one is a Ducky One TKL with Cherry MX Browns and ****ty ABS keycaps for 90Euros. Bought on 27 July 2016. Has terrible stabilizers and I puked on it while being ****faced on vodka last summer. Thankfully the only damage was my right arrow key. Now I have an Anne Pro 2 with a GMK set that costs twice as much as the keyboard itself, whoo!

If you are not trolling, this is one of the many reasons why I never buy used keyboards.

Offline MGMorden

  • Posts: 35
  • Location: South Carolina, USA
Re: How much was your 1st Mech Board?
« Reply #65 on: Wed, 12 December 2018, 20:57:00 »
My first 3 that I owned were all less than $2 at thrift stores but this was ~20 years ago. 

Since then I think they most expensive I've bought is a Matias Tactile Pro for $140 - I'd put off buying one for years and when they discontinued the PC version I figured I'd snap one up while they were still available.

My normal use keyboard at home though is still a $90 Unicomp.  At work I use a cheap chinese board that I desoldered the Outemu blue switches on and replace with a set of Novelkeys Box Jades.  Total investment on that one was probably ~$75 or so.
Boards: Unicomp Spacesaver (Buckling Spring) - IBM Model M (Buckling Spring) - Scorpius iOne M10 (Cherry MX Blue) - Logitech K840 (Romer-G) - E-3lue Cobra (replaced with NovelKeys Box Jades) - Smith Corona 6311 (Acer switches) - Matias Tactile Pro PC (Matias Click Switches) - Apple Desktop Bus Keyboard (Alps SKCM Orange)

Offline abhixec

  • Posts: 17
Re: How much was your 1st Mech Board?
« Reply #66 on: Thu, 13 December 2018, 13:52:56 »
My first keyboard was CM storm quickfire rapid- $80 for the cherry mx blue.

Offline dhb82

  • Posts: 59
  • Location: Denmark
Re: How much was your 1st Mech Board?
« Reply #67 on: Thu, 13 December 2018, 16:38:11 »
Ducky Shine II, only had blue LED with cherry mx browns. Was 150$ back then. Man i loved that keyboard, used it so much it broke in the end.

Offline Gati

  • Posts: 60
  • Location: FL
Re: How much was your 1st Mech Board?
« Reply #68 on: Tue, 25 December 2018, 17:35:01 »
Logitech G710+, $60

Offline Reiep

  • Posts: 9
Re: How much was your 1st Mech Board?
« Reply #69 on: Wed, 26 December 2018, 10:27:38 »
WASD CODE, $120-ish in a group order.

Offline MTXjunkie

  • Posts: 122
Re: How much was your 1st Mech Board?
« Reply #70 on: Wed, 26 December 2018, 11:58:38 »
WASD Code V2B. I got a deal on a lightly used one for ~$100.


Sent from my iPhone using Tapatalk Pro

Offline Chevy_Monsenhor

  • Posts: 32
  • Location: Rio Pardo - RS - Brasil
Re: How much was your 1st Mech Board?
« Reply #71 on: Wed, 26 December 2018, 13:10:22 »
A few years ago i got a Nixeus Moda V2 as my first MK, i think it cost me around R$300 or US$70
Keyboards: Leopold FC900R (Pinks), Logitech G613
Mice: Glorious Model O (Glossy), Logitech G305

Offline livewirerc

  • Posts: 38
  • Location: Austin, TX
Re: How much was your 1st Mech Board?
« Reply #72 on: Wed, 26 December 2018, 19:24:50 »
Fifty dollar Magicforce, then a hundred dollar KUL ES-87.

Offline hwood34

  • underwater squad
  • * Exalted Elder
  • Posts: 5918
  • Location: USA
  • #1 CL stan
    • Keyboard Illuminati
Re: How much was your 1st Mech Board?
« Reply #73 on: Thu, 27 December 2018, 19:23:36 »
Hell yea that's a trip down memory road. I couldn't even remember or pick out what I had from the one ****ty picture I posted, but:

Ducky DK9008 with MX blacks woulda been like $109 back then?
IV KWK Info Thread & KBK Info Thread IV (out of date)

Old GBs: Gateron Switches (2015) | CF-LX R1 (2015) | CF-LX R2 (2017) | CF-LXXX (2017) | Gen.s Gem Caps (2015)

"Under no pretext should arms and ammunition be surrendered; any attempt to disarm the workers must be frustrated, by force if necessary"

Offline sherminnater

  • Posts: 3
Re: How much was your 1st Mech Board?
« Reply #74 on: Thu, 27 December 2018, 20:44:47 »
~$75 for Rosewill RK9000 with cherry MX Browns, almost went back to a rubber dome because I really hated browns but now I have a board with cherry clears and another wither gateron greens. Currently waiting on parts for a KBD75 with Kailh Bronze.

Offline sdg2416

  • Posts: 12
Re: How much was your 1st Mech Board?
« Reply #75 on: Mon, 31 December 2018, 16:13:39 »
I paid around $85 for a Noppoo Choc Mini MX Black on Amazon about 4 years ago. It was nice because it was my first mechanical keyboard experience and I loved the layout. However a part of me believed that I had a bootleg version because it didnt look like the one in the pictures in regards to the laser-etching - and there were no caps and num lock windows for the lighting. Some of the switches felt weird to press, as there would be this unpleasant massive bump on the "T" and Page Up keys. It finally broke a few months ago which made me stumble upon the world of mechanical keyboard enthusiasts!

Sent from my SM-G955U using Tapatalk


Offline Darkside

  • Posts: 25
  • Location: TX
Re: How much was your 1st Mech Board?
« Reply #76 on: Tue, 01 January 2019, 02:15:50 »
It was a Poker II with MX Reds. I think it was around $100 and bought through eBay.  :cool:

Offline LeoShi

  • Posts: 75
Re: How much was your 1st Mech Board?
« Reply #77 on: Tue, 01 January 2019, 11:35:22 »
filco, about $150  :-X

Offline ThereminGoat

  • Posts: 120
  • Location: Ohio
Re: How much was your 1st Mech Board?
« Reply #78 on: Tue, 01 January 2019, 11:37:14 »
Funny enough, I got my Cherry MX Brown Anne Pro for free due to a shipping error. The site that I had bought it off of had estimated me two weeks shipping and after a month of waiting I just asked for a refund. Another month after that it showed up at the door and I called to say that I received something that wasn't mine but they had claimed they had no record of any order that was open since mine was closed out/dealt with.

If only I could have kept that luck for the more expensive stuff.

Offline nickheller

  • Cherry ML life
  • * Destiny Supporter
  • Posts: 1628
  • Location: Earth
Re: How much was your 1st Mech Board?
« Reply #79 on: Tue, 01 January 2019, 11:37:47 »
Ducky Zero, about 100$ at Micro Center.

Offline NegaYouDontKn0wMe

  • Posts: 11
Re: How much was your 1st Mech Board?
« Reply #80 on: Tue, 01 January 2019, 14:16:08 »
20$ Ebay Mechanical keyboard w/blue switches and RGB lighting, arriving in the mail soon :)

Offline mbardeen

  • Posts: 4
Re: How much was your 1st Mech Board?
« Reply #81 on: Tue, 08 January 2019, 19:44:06 »
IBM Model F XT. Probably around $2000 USD. But it included the PC and 640KB of RAM. In 1984  ;D ;D

Offline snozberries

  • Posts: 21
  • Location: SF Bay Area
  • Aww yiss!
Re: How much was your 1st Mech Board?
« Reply #82 on: Sun, 13 January 2019, 18:12:52 »
If I remember correctly it was a Quickfire Rapid with MX Blues for $40. Still miss that thing...

Offline efftwo

  • Posts: 7
  • Location: SoCal
Re: How much was your 1st Mech Board?
« Reply #83 on: Sun, 13 January 2019, 18:58:49 »
Corsair Vengeance K65, got it really cheap for about $65 four years ago.

Offline mattlach

  • Posts: 100
Re: How much was your 1st Mech Board?
« Reply #84 on: Sun, 13 January 2019, 20:51:47 »
My first one?   I don't know.  It was some sort Model M AT model that came with my 286 in 1991.  You know with the large round DIN connector.

I was 11, it was my first PC of my own, and click Model M's were practically given away at the time, as the new trend where the new "QuietKey" rubber domes.  Everyone wanted those because they were quiet!   My computer was practically obsolete even when I first got it, and someone threw in a free keyboard.

Fast forward roughly 15 years to 2005.  I had recently graduated from college and had long stopped using old clicky keyboards and switched to the modern modern rubber domes.   One day I remembered how much I missed typing on a solid tactile keyboard, checked out eBay, and won a Model M in pristine condition for $8.95






This was a time before people rediscovered mechanical keyboards, so these guys were going for next to nothing on eBay.

I recently looked into picking up a similar replacement (The Model M above became a casualty of a ceiling leak at work in 2011, where I had moved it after I replaced it with a Black M13 Trackpoint II model) and was shocked how expensive they had become on eBay.

Demand must have gone up :p
« Last Edit: Sun, 13 January 2019, 22:45:53 by mattlach »
IBM Beamspring > IBM Model F > IBM Model M > All Cherry MX, Alps and Topre > Rubber Dome & Scissor Switches.

Offline thearctican

  • Posts: 151
  • Location: Philadelphia, PA
Re: How much was your 1st Mech Board?
« Reply #85 on: Sun, 13 January 2019, 22:16:47 »
Free. I had a Model M that came with the IBM PC330 I was given in 1998 or so. That got scrapped when we moved out of state in 'favor' of the dell keyboard that came with the Optiplex I got for homeschooling.

Offline Ruskie

  • Posts: 32
Re: How much was your 1st Mech Board?
« Reply #86 on: Wed, 16 January 2019, 00:01:05 »
My first mech that wasn't bought for me was a Drevo Calibur, which I think I paid 60 dollars for off amazon.
Ive got myself a beefy boi

-Alf F62PE
-PCB Mount ZealV2 67g
-GMK KA1953 "OG Classic Retro"

8 pounds of clack

Offline abhixec

  • Posts: 17
Re: How much was your 1st Mech Board?
« Reply #87 on: Wed, 09 June 2021, 03:45:01 »
My first mech was quick fire rapid from cooler master. I think $40

Sent from my SM-G981U1 using Tapatalk


Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21177
  • Location: melbourne.vic.au
  • Missed another sale.
Re: How much was your 1st Mech Board?
« Reply #88 on: Wed, 09 June 2021, 03:58:31 »
First one ever - no idea, it was too long ago, I didn't take any specific notice of the keyboard, and they were generally supplied as standard back then.

First one I remember - NEC APC-H4100E that I got with an NEC APC 4 PowerMate 4C '286 computer (no, the NEC APC-H4100E that I have now is not the same one).

First modern mechanical keyboard - Ducky Shine 1, red LEDs, Cherry MX blue switches - $172.
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline Sup

  • * Exquisite Elder
  • Posts: 1185
  • Don't be a ****, never give up
Re: How much was your 1st Mech Board?
« Reply #89 on: Wed, 09 June 2021, 05:47:04 »
Poker II with MX blacks 2017
current
Filco Zero -  NOS Yellow Alps | Canoe R1 Gateron Red | AEK II JP Cream dampend |Filco Majestouch 2 Tex case Gateron Yellow | HHKB Pro 1 2003 Rev AO Serial 000171 | HHKB Pro 1 2003 Rev A1s|DZ60 OG Panda's with Fei spring and stem. | Sentraq S65_Plus OG Invyr Panda's | A17 Gateron Black TX 65G 3204 | Lubrigrante Wildcard Cherry MX silent blacks 3204 58.5G Springs | Rukia Everglide Tourmaline Blue 58.5G Springs | MGA Standard Greetech brown |
Coming soon
Rest in peace Billy Herrington(William Glen Harold Herrington) 1969-2018
Rest in peace Byron Daniel 1989-2020

Offline fohat.digs

  • * Elevated Elder
  • Posts: 6124
  • Location: 35°55'N, 83°53'W
  • weird funny old guy
Re: How much was your 1st Mech Board?
« Reply #90 on: Wed, 09 June 2021, 07:58:18 »
I bought many keyboards second-hand $1-$5 before I ever sprang for something on ebay, a 1991 Model M for about $65 if I am remembering correctly.
Over the past few decades there has been a redistribution of dignity — upward. The Republicans valorized entrepreneurs, CEOs and Wall Street. The Democratic Party became dominated by people in the creative class, who attended competitive colleges, moved to affluent metro areas, married each other and ladled advantages onto their kids so they could leap even farther ahead. There was a bipartisan embrace of a culture of individualism, which opens up a lot of space for people with resources and social support but means loneliness and abandonment for people without. Four years of college became the definition of the good life, which left roughly two-thirds of the country out. And so came the crisis that Biden was elected to address — the poisonous combination of elite insularity and vicious populist resentment. A group of people so enraged by a lack of respect that they are willing to risk death by Covid if they get to stick a middle finger in the air against those who they think look down on them. They are willing to torch our institutions because they are so resentful against the people who run them. The Democratic spending bills are economic packages that serve moral and cultural purposes. They should be measured by their cultural impact, not merely by some wonky analysis. In real, tangible ways, they would redistribute dignity back downward. They would support hundreds of thousands of jobs for home health care workers, child care workers, construction workers, metal workers, supply chain workers. They would ease the indignity millions of parents face having to raise their children in poverty.  – David Brooks NYT 2021

Offline jamster

  • Posts: 1044
  • Location: Asia
Re: How much was your 1st Mech Board?
« Reply #91 on: Wed, 09 June 2021, 09:11:54 »
First one I paid money for? GBP20, Model M.

First mech board? Free, Model M.


Offline phughes

  • Posts: 4
  • Location: Bangor, North Wales, UK
Re: How much was your 1st Mech Board?
« Reply #92 on: Wed, 09 June 2021, 10:28:00 »
Model F XT - £40 (back in 1991).

It did come with the rest of the PC, though.

PC long gone, but still using the keyboard (typing this) 30 years later with internal Soarer's.

Offline CarnageHimura

  • Posts: 24
  • Location: México
Re: How much was your 1st Mech Board?
« Reply #93 on: Wed, 09 June 2021, 10:42:21 »
1st - CMstorm MECH with brown, using it right now at work, like $150 on a friend store, but payed it configuring a couple of servers with VMware jejeje
2nd- Ducky One 2 Horizon, $99 solded to a friend.
3rd- Drop Alt High Profile, $245 + Everglide Pandas + Gat Ink Yellow v2

Offline chadrezzar

  • Posts: 16
Re: How much was your 1st Mech Board?
« Reply #94 on: Wed, 09 June 2021, 10:56:33 »
Aliexpress hotswap Board ~50$(teamwolf CIY TKL), switches ~80$(zealV1) right afer my G11 broke down(rubber in one of the keys broke)
« Last Edit: Wed, 09 June 2021, 10:58:33 by chadrezzar »

Offline MIGHTY CHICKEN

  • Posts: 507
  • buck buck, cluck cluck, squawk squawk
Re: How much was your 1st Mech Board?
« Reply #95 on: Wed, 09 June 2021, 11:00:13 »
Think it was a used $40 razer chroma v2, honestly I loved the wrist wrest that it had, nice and plushy

Offline diazel

  • Posts: 117
Re: How much was your 1st Mech Board?
« Reply #96 on: Wed, 09 June 2021, 11:34:20 »
$139.99 - Razer Black Widow Ultimate Tournament 2014

I have a keyboard drawer below my desktop surface that is its new home. Flavor of the day on top, trusty blackwidow underneath just in case I can't remember where the hell I programmed the print screen button on that particular keeb, lol

Offline kizuna

  • Posts: 25
Re: How much was your 1st Mech Board?
« Reply #97 on: Sun, 13 June 2021, 14:25:08 »
Vortex POK3R was my first, not sure how much i paid for it.

Offline azzipa

  • Posts: 424
  • Location: USA
Re: How much was your 1st Mech Board?
« Reply #98 on: Sun, 13 June 2021, 17:28:54 »
my first was a pok3r bought off fleabay. mx blues (turns out they're not really my style, at all). maybe usd $60 or $70? now, a few years later, i'm very reluctant to say how my wallet has fared with this hobby. i wish i had known then what i know now. could be an idea for another thread...


My first mech that wasn't bought for me was a Drevo Calibur, which I think I paid 60 dollars for off amazon.

the only reason i know about this board is from following the eclipse gb. i really dig the layout. when eclipse debuted in spring 2020 it was the first 70% (fkl/tkl) in ic. i looked for similar layouts and that was the only one i could find. next came onyx and calliope. all three made it to gb, but none have been delivered yet. (and maybe cucumber eventually moves past concept stage.)

Offline james97

  • Posts: 25
Re: How much was your 1st Mech Board?
« Reply #99 on: Tue, 15 June 2021, 21:04:56 »
Razer Huntsman v2 Analo - $250