Author Topic: Name it. We'll do our best to get it. (v2.0)  (Read 456056 times)

0 Members and 1 Guest are viewing this topic.

Offline 00zeRO

  • mechanicalkeyboards.com
  • * Moderator
  • Posts: 2354
  • Location: Tennessee
  • The 00verseer of Vault 77
    • Mechanical Keyboards
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1150 on: Thu, 25 June 2015, 12:57:12 »
I'll be bold and wish for ISO sets! Especially the Ducky PBT ones: http://www.impero.org/tech/keyboard/dn/08072014.jpg
More artisan caps would be cool as well. :cool:
ISO items have not done well in times past, so there are no active plans for them.

As for the artisan keycaps, we have a few up for preorder now...

Totally understandable, but not even low batches?
Where do I find preorders? I can see some new HKPs but they are just out of stock.

Find them here in our newly redesigned Incoming Keyboards and Accessories page:

https://mechanicalkeyboards.com/incoming.php
Daily Driver: Typist A w/Midnight Dawn | Kailh BOX Clicks

          
Junktown 2: Now on eBay!

Offline Lokomotivet

  • Posts: 174
  • (⌐■_■)
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1151 on: Thu, 25 June 2015, 15:56:32 »
I'll be bold and wish for ISO sets! Especially the Ducky PBT ones: http://www.impero.org/tech/keyboard/dn/08072014.jpg
More artisan caps would be cool as well. :cool:
ISO items have not done well in times past, so there are no active plans for them.

As for the artisan keycaps, we have a few up for preorder now...

Totally understandable, but not even low batches?
Where do I find preorders? I can see some new HKPs but they are just out of stock.

Find them here in our newly redesigned Incoming Keyboards and Accessories page:

https://mechanicalkeyboards.com/incoming.php

Sorry if I misunderstood this but it links to the same item page(s) where it says that it's out of stock.
Or do you mean that if I make a purchase on one of the incoming items will it be treated as an pre-order?
Last time I bought something that apparently was out of stock on your page, my order was canceled and refunded.
| ISO |

Offline trees

  • Posts: 382
  • Location: Detroit
  • I like bagels.
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1152 on: Thu, 25 June 2015, 16:06:46 »
I'll be bold and wish for ISO sets! Especially the Ducky PBT ones: http://www.impero.org/tech/keyboard/dn/08072014.jpg
More artisan caps would be cool as well. :cool:
ISO items have not done well in times past, so there are no active plans for them.

As for the artisan keycaps, we have a few up for preorder now...

Totally understandable, but not even low batches?
Where do I find preorders? I can see some new HKPs but they are just out of stock.

Find them here in our newly redesigned Incoming Keyboards and Accessories page:

https://mechanicalkeyboards.com/incoming.php

Sorry if I misunderstood this but it links to the same item page(s) where it says that it's out of stock.
Or do you mean that if I make a purchase on one of the incoming items will it be treated as an pre-order?
Last time I bought something that apparently was out of stock on your page, my order was canceled and refunded.

If its listed as 'incoming' and you order iot i believe its treated as a pre-order. I did this with the Pok3r and some HKP caps before.
B.Face HHKB - B.mini - Black/Purple Custom

Offline Lokomotivet

  • Posts: 174
  • (⌐■_■)
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1153 on: Thu, 25 June 2015, 16:27:05 »
Thanks for the confirmation!
| ISO |

Offline Flyersfan1

  • * Destiny Supporter
  • Posts: 1209
  • Location: Philadelphia
  • Hi!
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1154 on: Thu, 25 June 2015, 16:48:46 »
Will you guys carry the new ducky mouse?
Quote from: Photekq
i know people who think salt is spicy

Offline 00zeRO

  • mechanicalkeyboards.com
  • * Moderator
  • Posts: 2354
  • Location: Tennessee
  • The 00verseer of Vault 77
    • Mechanical Keyboards
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1155 on: Thu, 25 June 2015, 16:56:11 »
Will you guys carry the new ducky mouse?

Definitely maybe
Daily Driver: Typist A w/Midnight Dawn | Kailh BOX Clicks

          
Junktown 2: Now on eBay!

Offline CommonCurt

  • One of the cool kids
  • * Esteemed Elder
  • Posts: 4632
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1156 on: Fri, 03 July 2015, 03:32:24 »
Just noticed that you guys got some FC660C's in stock  :thumb:

Do you plan on carrying more Leopold boards, like the White FC660C, White FC750RT etc.?

Also, are the FC660M's you guys have in stock made in Korea, or China?
Some of Ye olde  Keyboards -->
More
OTD Koala:  62g Old MX-Blacks   |   LZ-GH V2:  MX-?62g   |   KMAC2:   62g Tactile MX-Greys   |   LZ CLS s:   62g Vintage MX-Blacks   |   X60:   62g Vintage MX-Blacks   |   GON NerD 60:  62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  62g MX-Clears  &   62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More

Offline bcredbottle

  • Posts: 695
  • Location: Seattle, Washington
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1157 on: Mon, 06 July 2015, 14:33:16 »
Ergodox cases that are not $100+, please!

Offline nickheller

  • Cherry ML life
  • * Destiny Supporter
  • Posts: 1632
  • Location: Earth
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1158 on: Mon, 06 July 2015, 16:23:50 »
Purple 60% TEX Aluminum Case! I've been trying to get my hands on one for a while.

We are looking forward to selling out of all other colors. Soon as that happens, you can believe we will restock Purple cases.  :thumb:

I would pick one of the purple ones up if they came back in stock. I think a purple case would look nice with Hyperfuse.

Offline bcredbottle

  • Posts: 695
  • Location: Seattle, Washington
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1159 on: Mon, 06 July 2015, 18:27:52 »
-
« Last Edit: Mon, 06 July 2015, 18:32:49 by bcredbottle »

Offline sethk_

  • Grand Master Wizard Pizza
  • * Esteemed Elder
  • Posts: 2712
  • Location: Pittsburgh, Pennsylvania
  • www.kbdhub.com
    • My webstore
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1160 on: Mon, 06 July 2015, 20:23:32 »
More
Ergodox cases that are not $100+, please!
then get one custom cut. the files are publicly available

E.g. at?
Living CAD thread

But it would  cost the same. There are two sides with five layers each. Assuming each layer costs $10 (according to Ponoko), that = 5x2x$10 = $100.
I can put them all into one file and try and help out with price. If you make a new account they let you use the material for free,  or the shop time for free, I forget. Let me know and I will do it.

Having them in one or two files would be incredible. Below is the zip file from the CAD thread. I was looking to make the standard one (i.e. compact/half-hand).
Of course, if I can ever repay you in some way, just say the word.

https://www.dropbox.com/s/vv2e294vwkzbvfx/ErgoDox_Acrylic_Case_Designed_by_Litster.zip
I will have to do 3 files because their largest size lets me get 4 in vertical, but one in sideways

Would it make a difference if I wanted to swap in the Alps layer 3? https://www.reddit.com/r/MechanicalKeyboards/comments/2dzgpx/modificationcad_filesergodox_layer_3_alps_plate/
Sadly no :(

I mean, I'm lucky as **** that someone is doing this for me, and with the ALPS layer 3 plate, no less. I can't complain!
So you want ALPs plate in there? I can do that.

Offline bcredbottle

  • Posts: 695
  • Location: Seattle, Washington
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1161 on: Mon, 06 July 2015, 20:45:17 »
More
Ergodox cases that are not $100+, please!
then get one custom cut. the files are publicly available

E.g. at?
Living CAD thread

But it would  cost the same. There are two sides with five layers each. Assuming each layer costs $10 (according to Ponoko), that = 5x2x$10 = $100.
I can put them all into one file and try and help out with price. If you make a new account they let you use the material for free,  or the shop time for free, I forget. Let me know and I will do it.

Having them in one or two files would be incredible. Below is the zip file from the CAD thread. I was looking to make the standard one (i.e. compact/half-hand).
Of course, if I can ever repay you in some way, just say the word.

https://www.dropbox.com/s/vv2e294vwkzbvfx/ErgoDox_Acrylic_Case_Designed_by_Litster.zip
I will have to do 3 files because their largest size lets me get 4 in vertical, but one in sideways

Would it make a difference if I wanted to swap in the Alps layer 3? https://www.reddit.com/r/MechanicalKeyboards/comments/2dzgpx/modificationcad_filesergodox_layer_3_alps_plate/
Sadly no :(

I mean, I'm lucky as **** that someone is doing this for me, and with the ALPS layer 3 plate, no less. I can't complain!
So you want ALPs plate in there? I can do that.

Yes, please! I am forever indebted!

Offline 00zeRO

  • mechanicalkeyboards.com
  • * Moderator
  • Posts: 2354
  • Location: Tennessee
  • The 00verseer of Vault 77
    • Mechanical Keyboards
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1162 on: Tue, 07 July 2015, 12:42:51 »
More
Ergodox cases that are not $100+, please!
then get one custom cut. the files are publicly available

E.g. at?
Living CAD thread

But it would  cost the same. There are two sides with five layers each. Assuming each layer costs $10 (according to Ponoko), that = 5x2x$10 = $100.
I can put them all into one file and try and help out with price. If you make a new account they let you use the material for free,  or the shop time for free, I forget. Let me know and I will do it.

Having them in one or two files would be incredible. Below is the zip file from the CAD thread. I was looking to make the standard one (i.e. compact/half-hand).
Of course, if I can ever repay you in some way, just say the word.

https://www.dropbox.com/s/vv2e294vwkzbvfx/ErgoDox_Acrylic_Case_Designed_by_Litster.zip
I will have to do 3 files because their largest size lets me get 4 in vertical, but one in sideways

Would it make a difference if I wanted to swap in the Alps layer 3? https://www.reddit.com/r/MechanicalKeyboards/comments/2dzgpx/modificationcad_filesergodox_layer_3_alps_plate/
Sadly no :(

I mean, I'm lucky as **** that someone is doing this for me, and with the ALPS layer 3 plate, no less. I can't complain!
So you want ALPs plate in there? I can do that.

More
Ergodox cases that are not $100+, please!
then get one custom cut. the files are publicly available

E.g. at?
Living CAD thread

But it would  cost the same. There are two sides with five layers each. Assuming each layer costs $10 (according to Ponoko), that = 5x2x$10 = $100.
I can put them all into one file and try and help out with price. If you make a new account they let you use the material for free,  or the shop time for free, I forget. Let me know and I will do it.

Having them in one or two files would be incredible. Below is the zip file from the CAD thread. I was looking to make the standard one (i.e. compact/half-hand).
Of course, if I can ever repay you in some way, just say the word.

https://www.dropbox.com/s/vv2e294vwkzbvfx/ErgoDox_Acrylic_Case_Designed_by_Litster.zip
I will have to do 3 files because their largest size lets me get 4 in vertical, but one in sideways

Would it make a difference if I wanted to swap in the Alps layer 3? https://www.reddit.com/r/MechanicalKeyboards/comments/2dzgpx/modificationcad_filesergodox_layer_3_alps_plate/
Sadly no :(

I mean, I'm lucky as **** that someone is doing this for me, and with the ALPS layer 3 plate, no less. I can't complain!
So you want ALPs plate in there? I can do that.

Yes, please! I am forever indebted!

Could you please carry this conversation into PM's...
Daily Driver: Typist A w/Midnight Dawn | Kailh BOX Clicks

          
Junktown 2: Now on eBay!

Offline 00zeRO

  • mechanicalkeyboards.com
  • * Moderator
  • Posts: 2354
  • Location: Tennessee
  • The 00verseer of Vault 77
    • Mechanical Keyboards
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1163 on: Tue, 07 July 2015, 12:46:19 »
Just noticed that you guys got some FC660C's in stock  :thumb:

Do you plan on carrying more Leopold boards, like the White FC660C, White FC750RT etc.?

Also, are the FC660M's you guys have in stock made in Korea, or China?

We certainly have plans to carry just as much Leopold as we can, and then some... :)

We seem to carry a mix of Korean, Chinese, and Japanese Leopolds...very cool to see the company array across the Asian market lines.
Daily Driver: Typist A w/Midnight Dawn | Kailh BOX Clicks

          
Junktown 2: Now on eBay!

Offline ShakeR

  • * Moderator
  • Thread Starter
  • Posts: 148
    • http://mechanicalkeyboards.com
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1164 on: Wed, 08 July 2015, 13:23:10 »
Removed most of the conversation between seth and bcred just as a cleanup.  If I accidentally removed something else, my bad!  I'm rusty.
MechanicalKeyboards.com - What do you type on?

Offline Flyersfan1

  • * Destiny Supporter
  • Posts: 1209
  • Location: Philadelphia
  • Hi!
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1165 on: Wed, 08 July 2015, 13:25:19 »
Removed most of the conversation between seth and bcred just as a cleanup.  If I accidentally removed something else, my bad!  I'm rusty.
omg, who's this guy?!?!
Quote from: Photekq
i know people who think salt is spicy

Offline sethk_

  • Grand Master Wizard Pizza
  • * Esteemed Elder
  • Posts: 2712
  • Location: Pittsburgh, Pennsylvania
  • www.kbdhub.com
    • My webstore
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1166 on: Wed, 08 July 2015, 14:06:01 »
Removed most of the conversation between seth and bcred just as a cleanup.  If I accidentally removed something else, my bad!  I'm rusty.
Yeah, sorry about that, I put more tags when I realized how long it was getting, but we aren't able to remove stuff. Thanks!

Offline CommonCurt

  • One of the cool kids
  • * Esteemed Elder
  • Posts: 4632
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1167 on: Wed, 08 July 2015, 16:09:13 »
Just noticed that you guys got some FC660C's in stock  :thumb:

Do you plan on carrying more Leopold boards, like the White FC660C, White FC750RT etc.?

Also, are the FC660M's you guys have in stock made in Korea, or China?

We certainly have plans to carry just as much Leopold as we can, and then some... :)

We seem to carry a mix of Korean, Chinese, and Japanese Leopolds...very cool to see the company array across the Asian market lines.

Sounds good.  If you get some of the white FC750R's that have normal spacebar spacing (the ones that have "FC750RT" printed on the PCB under the spacebar) I will pick one up.
I believe I read that the ones with FC750RT printed under the spacebar were made in Korea, but I'm not sure if that is still the case.
Some of Ye olde  Keyboards -->
More
OTD Koala:  62g Old MX-Blacks   |   LZ-GH V2:  MX-?62g   |   KMAC2:   62g Tactile MX-Greys   |   LZ CLS s:   62g Vintage MX-Blacks   |   X60:   62g Vintage MX-Blacks   |   GON NerD 60:  62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  62g MX-Clears  &   62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More

Offline Chylo

  • Posts: 1
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1168 on: Wed, 08 July 2015, 17:28:56 »
Any chance for Leopold FC660M with clears anytime soon?

Offline dante

  • Posts: 2553
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1169 on: Wed, 08 July 2015, 18:25:39 »
KBParadise Facebook says you are going to be receiving some V80MTS this month.  When will the preorder pages go live?

Offline JoshMK

  • * Commercial Vendor
  • Posts: 12
  • Location: Fairview, TN
  • MechanicalKeyboards.com
    • MechanicalKeyboards
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1170 on: Thu, 09 July 2015, 09:21:24 »
Any chance for Leopold FC660M with clears anytime soon?
No ETA.

KBParadise Facebook says you are going to be receiving some V80MTS this month.  When will the preorder pages go live?
Yesterday.  Very limited quantities though. Larger shipment coming in August or September.

Josh McConnell
MechanicalKeyboards.com
Josh@mechanicalkeyboards.com
615.266.1420 ext303

Offline 00zeRO

  • mechanicalkeyboards.com
  • * Moderator
  • Posts: 2354
  • Location: Tennessee
  • The 00verseer of Vault 77
    • Mechanical Keyboards
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1171 on: Thu, 09 July 2015, 13:21:03 »
Removed most of the conversation between seth and bcred just as a cleanup.  If I accidentally removed something else, my bad!  I'm rusty.
omg, who's this guy?!?!

Lol, I know...
Daily Driver: Typist A w/Midnight Dawn | Kailh BOX Clicks

          
Junktown 2: Now on eBay!

Offline SamFlynn

  • Posts: 20
  • Location: From inside the hive, behind your eyes, and off the grid...into the Black.
  • Type until there is no need...
    • Firefly Online Forum
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1172 on: Thu, 09 July 2015, 20:38:37 »
Any chance for Leopold FC660M with clears anytime soon?

+1
<Press Any Key>

Offline dante

  • Posts: 2553
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1173 on: Fri, 10 July 2015, 08:31:24 »
KBParadise Facebook says you are going to be receiving some V80MTS this month.  When will the preorder pages go live?
Yesterday.  Very limited quantities though. Larger shipment coming in August or September.

If someone is nervous about buying the Fukka V80MTS because of scarce supply of replacement switches; would you be able to carry some packs of these as an insurance policy?  Maybe not on this initial shipment as it's probably already in transit but maybe on the next?

Offline JoshMK

  • * Commercial Vendor
  • Posts: 12
  • Location: Fairview, TN
  • MechanicalKeyboards.com
    • MechanicalKeyboards
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1174 on: Fri, 10 July 2015, 09:47:08 »
Any chance for Leopold FC660M with clears anytime soon?

+1
We're ordering as much as possible whenever possible. Waiting to hear back from Leopold regarding additional models.

KBParadise Facebook says you are going to be receiving some V80MTS this month.  When will the preorder pages go live?
Yesterday.  Very limited quantities though. Larger shipment coming in August or September.
If someone is nervous about buying the Fukka V80MTS because of scarce supply of replacement switches; would you be able to carry some packs of these as an insurance policy?  Maybe not on this initial shipment as it's probably already in transit but maybe on the next?
We have thousands of Fukka switches.

Josh McConnell
MechanicalKeyboards.com
Josh@mechanicalkeyboards.com
615.266.1420 ext303

Offline dante

  • Posts: 2553
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1175 on: Fri, 10 July 2015, 12:21:41 »
We have thousands of Fukka switches.

I'm confused; are these yet to be put on the site or are they identical to the listed TaoHao Clicky?  If the latter is true you might want to put TaoHao/Fukka in the name.

Offline JoshMK

  • * Commercial Vendor
  • Posts: 12
  • Location: Fairview, TN
  • MechanicalKeyboards.com
    • MechanicalKeyboards
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1176 on: Fri, 10 July 2015, 12:41:50 »
Fukka = Taihao = Fuhua = FellyDu = ????

The only official name (at this moment, that I'm aware of) is TaiHao.
Josh McConnell
MechanicalKeyboards.com
Josh@mechanicalkeyboards.com
615.266.1420 ext303

Offline dante

  • Posts: 2553
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1177 on: Fri, 10 July 2015, 13:18:13 »
Fukka = Taihao = Fuhua = FellyDu = ????

The only official name (at this moment, that I'm aware of) is TaiHao.

As long as they're identical to what is in the V80MTS Fukka/Fuhua version that's all that matters.  :thumb:

Offline CommonCurt

  • One of the cool kids
  • * Esteemed Elder
  • Posts: 4632
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1178 on: Sun, 12 July 2015, 01:10:50 »
Please tell me that you guys will be adding the "Just in" & "Incoming Stock" sections to your new website.  I used them all the time.

If they're there, and I just don't see it then I apologize.
Some of Ye olde  Keyboards -->
More
OTD Koala:  62g Old MX-Blacks   |   LZ-GH V2:  MX-?62g   |   KMAC2:   62g Tactile MX-Greys   |   LZ CLS s:   62g Vintage MX-Blacks   |   X60:   62g Vintage MX-Blacks   |   GON NerD 60:  62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  62g MX-Clears  &   62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More

Offline trees

  • Posts: 382
  • Location: Detroit
  • I like bagels.
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1179 on: Sun, 12 July 2015, 03:07:08 »
Please tell me that you guys will be adding the "Just in" & "Incoming Stock" sections to your new website.  I used them all the time.

If they're there, and I just don't see it then I apologize.

https://mechanicalkeyboards.com/incoming.php

https://mechanicalkeyboards.com/arrived.php
B.Face HHKB - B.mini - Black/Purple Custom

Offline CommonCurt

  • One of the cool kids
  • * Esteemed Elder
  • Posts: 4632
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1180 on: Sun, 12 July 2015, 03:16:46 »
Please tell me that you guys will be adding the "Just in" & "Incoming Stock" sections to your new website.  I used them all the time.

If they're there, and I just don't see it then I apologize.

https://mechanicalkeyboards.com/incoming.php

https://mechanicalkeyboards.com/arrived.php

Ah, I see what my issue was.  I had https://mechanicalkeyboards.com/shop/ bookedmarked (which they changed), and then when I clicked "Home" it takes me to the new homepage.
Some of Ye olde  Keyboards -->
More
OTD Koala:  62g Old MX-Blacks   |   LZ-GH V2:  MX-?62g   |   KMAC2:   62g Tactile MX-Greys   |   LZ CLS s:   62g Vintage MX-Blacks   |   X60:   62g Vintage MX-Blacks   |   GON NerD 60:  62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  62g MX-Clears  &   62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More

Offline Jokrik

  • * Destiny Supporter
  • Posts: 3031
  • Location: Death Star
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1181 on: Sun, 12 July 2015, 03:23:08 »
Please tell me that you guys will be adding the "Just in" & "Incoming Stock" sections to your new website.  I used them all the time.

If they're there, and I just don't see it then I apologize.

https://mechanicalkeyboards.com/incoming.php

https://mechanicalkeyboards.com/arrived.php

Ah, I see what my issue was.  I had https://mechanicalkeyboards.com/shop/ bookedmarked (which they changed), and then when I clicked "Home" it takes me to the new homepage.

I tried to avoid that page,
It wallet-hack me so much T_T

especially that incoming ergo pro (mac)
« Last Edit: Sun, 12 July 2015, 03:25:01 by jokrik »
Quote
Women always figure out the truth. Always. - Han Solo

Offline ATXTider

  • Posts: 316
  • I keep it playa while some choose to play it safe
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1182 on: Mon, 13 July 2015, 00:15:30 »
When do you guys expect some more Black or Smoke KUL clears?

Offline 00zeRO

  • mechanicalkeyboards.com
  • * Moderator
  • Posts: 2354
  • Location: Tennessee
  • The 00verseer of Vault 77
    • Mechanical Keyboards
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1183 on: Mon, 13 July 2015, 16:46:44 »
When do you guys expect some more Black or Smoke KUL clears?

We currently have a few of the Smokes available in stock. As for the Black version, we are not sure when we will be restocking them. We certainly hope it will be within a month or so.
Daily Driver: Typist A w/Midnight Dawn | Kailh BOX Clicks

          
Junktown 2: Now on eBay!

Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1184 on: Tue, 14 July 2015, 22:21:56 »
Really hope you can get the purple 60% Tex case back in stock soon! The other colors would be nice too, but not nearly as important as the purple!

Offline 00zeRO

  • mechanicalkeyboards.com
  • * Moderator
  • Posts: 2354
  • Location: Tennessee
  • The 00verseer of Vault 77
    • Mechanical Keyboards
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1185 on: Tue, 14 July 2015, 22:34:49 »
Really hope you can get the purple 60% Tex case back in stock soon! The other colors would be nice too, but not nearly as important as the purple!

As long as the rest of our stock continues to sell well, we will restock them sooner rather than later.
Daily Driver: Typist A w/Midnight Dawn | Kailh BOX Clicks

          
Junktown 2: Now on eBay!

Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1186 on: Wed, 15 July 2015, 06:50:18 »
Really hope you can get the purple 60% Tex case back in stock soon! The other colors would be nice too, but not nearly as important as the purple!

As long as the rest of our stock continues to sell well, we will restock them sooner rather than later.

This is great news! Thanks for your reply.

Offline Danboard

  • Posts: 105
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1187 on: Thu, 23 July 2015, 16:58:55 »
Any chance of restocking brown switches soon?

Offline 00zeRO

  • mechanicalkeyboards.com
  • * Moderator
  • Posts: 2354
  • Location: Tennessee
  • The 00verseer of Vault 77
    • Mechanical Keyboards
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1188 on: Thu, 23 July 2015, 22:54:56 »
Any chance of restocking brown switches soon?

December for Cherry MX. But we are fully stocked on the super smooth and reliable Greetech Browns. Would you like PCB or Plate?
Daily Driver: Typist A w/Midnight Dawn | Kailh BOX Clicks

          
Junktown 2: Now on eBay!

Offline CommonCurt

  • One of the cool kids
  • * Esteemed Elder
  • Posts: 4632
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1189 on: Thu, 23 July 2015, 23:14:41 »
Any chance of restocking brown switches soon?

December for Cherry MX. But we are fully stocked on the super smooth and reliable Greetech Browns. Would you like PCB or Plate?

Some of Ye olde  Keyboards -->
More
OTD Koala:  62g Old MX-Blacks   |   LZ-GH V2:  MX-?62g   |   KMAC2:   62g Tactile MX-Greys   |   LZ CLS s:   62g Vintage MX-Blacks   |   X60:   62g Vintage MX-Blacks   |   GON NerD 60:  62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  62g MX-Clears  &   62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More

Offline 00zeRO

  • mechanicalkeyboards.com
  • * Moderator
  • Posts: 2354
  • Location: Tennessee
  • The 00verseer of Vault 77
    • Mechanical Keyboards
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1190 on: Fri, 24 July 2015, 09:21:16 »
Any chance of restocking brown switches soon?

December for Cherry MX. But we are fully stocked on the super smooth and reliable Greetech Browns. Would you like PCB or Plate?

Show Image


Pipe down, you!  :p Everyone knows you don't like Browns, CC...
Daily Driver: Typist A w/Midnight Dawn | Kailh BOX Clicks

          
Junktown 2: Now on eBay!

Offline Ryukuxyz

  • Posts: 47
  • Location: Los Angeles Area
  • VE.A!!!
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1191 on: Tue, 28 July 2015, 17:13:20 »
Will you ever be restocking the Ducky Shine 3, particularly the MX Brown/blue LED model?

Offline JoshMK

  • * Commercial Vendor
  • Posts: 12
  • Location: Fairview, TN
  • MechanicalKeyboards.com
    • MechanicalKeyboards
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1192 on: Wed, 29 July 2015, 10:36:25 »
Will you ever be restocking the Ducky Shine 3, particularly the MX Brown/blue LED model?
Ducky has since released the Shine 4. The Shine 5 should be out later this year. It's hard to imagine Ducky reproducing an older model.
Josh McConnell
MechanicalKeyboards.com
Josh@mechanicalkeyboards.com
615.266.1420 ext303

Offline CommonCurt

  • One of the cool kids
  • * Esteemed Elder
  • Posts: 4632
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1193 on: Thu, 30 July 2015, 04:38:36 »
Do you think you guys will ever stock some non low profile aluminum 60% cases?
Some of Ye olde  Keyboards -->
More
OTD Koala:  62g Old MX-Blacks   |   LZ-GH V2:  MX-?62g   |   KMAC2:   62g Tactile MX-Greys   |   LZ CLS s:   62g Vintage MX-Blacks   |   X60:   62g Vintage MX-Blacks   |   GON NerD 60:  62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  62g MX-Clears  &   62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More

Offline 00zeRO

  • mechanicalkeyboards.com
  • * Moderator
  • Posts: 2354
  • Location: Tennessee
  • The 00verseer of Vault 77
    • Mechanical Keyboards
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1194 on: Thu, 30 July 2015, 07:14:10 »
Do you think you guys will ever stock some non low profile aluminum 60% cases?

As in high profile? Are you able to provide a picture as an example? I can say that it is not an impossibility, just something we have either overlooked or just not considered.
Daily Driver: Typist A w/Midnight Dawn | Kailh BOX Clicks

          
Junktown 2: Now on eBay!

Offline CommonCurt

  • One of the cool kids
  • * Esteemed Elder
  • Posts: 4632
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1195 on: Thu, 30 July 2015, 07:17:27 »
Do you think you guys will ever stock some non low profile aluminum 60% cases?

As in high profile? Are you able to provide a picture as an example? I can say that it is not an impossibility, just something we have either overlooked or just not considered.

Basically cases were you can't see the switch housing.
Some of Ye olde  Keyboards -->
More
OTD Koala:  62g Old MX-Blacks   |   LZ-GH V2:  MX-?62g   |   KMAC2:   62g Tactile MX-Greys   |   LZ CLS s:   62g Vintage MX-Blacks   |   X60:   62g Vintage MX-Blacks   |   GON NerD 60:  62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  62g MX-Clears  &   62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More

Offline 00zeRO

  • mechanicalkeyboards.com
  • * Moderator
  • Posts: 2354
  • Location: Tennessee
  • The 00verseer of Vault 77
    • Mechanical Keyboards
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1196 on: Thu, 30 July 2015, 07:52:48 »
Do you think you guys will ever stock some non low profile aluminum 60% cases?

As in high profile? Are you able to provide a picture as an example? I can say that it is not an impossibility, just something we have either overlooked or just not considered.

Basically cases were you can't see the switch housing.

Do you know of any aluminum cases with this higher profile?
Daily Driver: Typist A w/Midnight Dawn | Kailh BOX Clicks

          
Junktown 2: Now on eBay!

Offline CommonCurt

  • One of the cool kids
  • * Esteemed Elder
  • Posts: 4632
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1197 on: Thu, 30 July 2015, 08:03:43 »
Do you think you guys will ever stock some non low profile aluminum 60% cases?

As in high profile? Are you able to provide a picture as an example? I can say that it is not an impossibility, just something we have either overlooked or just not considered.

Basically cases were you can't see the switch housing.

Do you know of any aluminum cases with this higher profile?

The FMJ cases that Feng did a group buy for a while ago.

I will post some links to others when I get to my desktop later.
Some of Ye olde  Keyboards -->
More
OTD Koala:  62g Old MX-Blacks   |   LZ-GH V2:  MX-?62g   |   KMAC2:   62g Tactile MX-Greys   |   LZ CLS s:   62g Vintage MX-Blacks   |   X60:   62g Vintage MX-Blacks   |   GON NerD 60:  62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  62g MX-Clears  &   62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More

Offline CommonCurt

  • One of the cool kids
  • * Esteemed Elder
  • Posts: 4632
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1198 on: Sat, 01 August 2015, 01:18:53 »
Do you think you guys will ever stock some non low profile aluminum 60% cases?

As in high profile? Are you able to provide a picture as an example? I can say that it is not an impossibility, just something we have either overlooked or just not considered.

Basically cases were you can't see the switch housing.

Do you know of any aluminum cases with this higher profile?

This is what I'm talking about.
Here is a example of a low profile TEX case next to a normal height MKC case.  See how the MKC case hides the switch housings?

TEX 60% vs MKC 60% by Compact Keyboards, on Flickr

More non low profile case examples. These particular cases were from group buys.

Hammer &amp; Duck Poker Pitch Comparision by Compact Keyboards, on Flickr


This is one that was sold on Massdrop.





Some of Ye olde  Keyboards -->
More
OTD Koala:  62g Old MX-Blacks   |   LZ-GH V2:  MX-?62g   |   KMAC2:   62g Tactile MX-Greys   |   LZ CLS s:   62g Vintage MX-Blacks   |   X60:   62g Vintage MX-Blacks   |   GON NerD 60:  62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  62g MX-Clears  &   62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More

Offline UsualSuspectXXX

  • Posts: 3461
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: Name it. We'll do our best to get it. (v2.0)
« Reply #1199 on: Sat, 01 August 2015, 22:40:31 »
Do you think you guys will ever stock some non low profile aluminum 60% cases?

As in high profile? Are you able to provide a picture as an example? I can say that it is not an impossibility, just something we have either overlooked or just not considered.

Basically cases were you can't see the switch housing.

Do you know of any aluminum cases with this higher profile?

This is what I'm talking about.
Here is a example of a low profile TEX case next to a normal height MKC case.  See how the MKC case hides the switch housings?

Show Image
TEX 60% vs MKC 60% by Compact Keyboards, on Flickr

More non low profile case examples. These particular cases were from group buys.

Show Image
Hammer &amp; Duck Poker Pitch Comparision by Compact Keyboards, on Flickr


This is one that was sold on Massdrop.

Show Image


Man, those are some nice looking cases right there!