Author Topic: HELP! noob pulled off model F big ass enter key and can't put it back in place  (Read 3179 times)

0 Members and 1 Guest are viewing this topic.

Offline Janeiac

  • Thread Starter
  • Posts: 23
  • Location: Boston, MA
What's a noob to do? Advice much appreciated, especially with pictures .I've studied all the teardowns on here and youtube fo hours, and I still can't see what I need to do.

Offline intelli78

  • Posts: 1503
  • Location: Seattle
What's a noob to do? Advice much appreciated, especially with pictures .I've studied all the teardowns on here and youtube fo hours, and I still can't see what I need to do.

You just have to position the stabilizer wire relative to the clips built into the case, such that when you push the Enter down to reseat it, the wire will slide into the clips. I don't know if that will help you if you've already studied the teardowns, but it shouldn't be that difficult. Where exactly are you going wrong? Are you having trouble getting the wire to go in the clips?
Please consider carefully before you decide to comment, for Jesus.

Offline Janeiac

  • Thread Starter
  • Posts: 23
  • Location: Boston, MA
Thanks for answering. I see two little tabs above the right-hand shift key... how does the wire fit? are they open at the top, or bottom? Even with my eyeglasses on I can't tell. Do I finger-feel the wire towards the shift key?

Offline fohat.digs

  • * Elevated Elder
  • Posts: 6533
  • Location: 35°55'N, 83°53'W
  • weird funny old guy
Thanks for answering. I see two little tabs above the right-hand shift key... how does the wire fit? are they open at the top, or bottom? Even with my eyeglasses on I can't tell. Do I finger-feel the wire towards the shift key?

They probably open top. With an ISO Enter, I think that they face sideways.

I use a very small screwdriver to guide them into place.
"Starting in 2011, the deficits again started to shrink. During Obama’s term  the deficit was reduced by $900 Billion  before finally in 2015 the GOP managed to wrangle a “reconciliation” bill out of Obama where he again cut corporate taxes, as well as made permanent some of George W. Bush’s original tax cuts. This is the year everything reversed. Before this, under Clinton, Bush and Obama the deficit in almost every year was gradually decreasing. The balance we had of taxes and the economy was bringing the deficit down, the money coming in was slowly catching up with the money going out until 2015. Trump’s subsequent tax cut has continued the new trend even after the rest of Bush’s cuts have since expired. Obama had an average GDP of 2.3%, with 11.6 million jobs created and unemployment peaking at 10% in 2009, then falling to 4.3% in 2016. If we had continued on that downward deficit track, we would have again reached balance and another surplus in 2017-2018.
– Frank V Walton 2025-07-01

Offline intelli78

  • Posts: 1503
  • Location: Seattle
I don't have my AT F with me at the moment, but if memory serves, the clips open at the top. So you need to position the wire against the steel plate, so that as you push it down onto the stem, the wire slides toward you and under the clips.

Edit: One trick I use is to get the stem lined up with the spring, and then tilt the enter away from you. Then use some type of thin implement to hold the wire down on the plate so that it guides into the clips.
Please consider carefully before you decide to comment, for Jesus.

Offline Janeiac

  • Thread Starter
  • Posts: 23
  • Location: Boston, MA
Success! Thanks for the advice, intelli78's description was just what I needed. See y'all in my next thread! :)