Author Topic: [IC] wind X a large layout keyboard update more pics  (Read 9130 times)

0 Members and 1 Guest are viewing this topic.

Offline windlabs

  • Thread Starter
  • Posts: 8
[IC] wind X a large layout keyboard update more pics
« on: Tue, 28 September 2021, 01:21:08 »
Wind.X



Hello Geekhack,
We are Wind Studio from China

Wind series:





The major difference is it allows for a 2U 0 key, which is very important to dozens of people, especially if you're used to typing 0 with your thumb. And then there are those that meet the requirements like Austin.



First of all, let's talk about the theme, simple appearance and enough sincerity of the internal structure optimization, I believe that is "interesting soul pick one in ten thousand, nice-looking  is the same".
The appearance is very simple, and very durable. The front arrow keys on the top and back of the strip out of the strip are brass weight



So the looks very simple, but what is the feature of this kit?
First of all, the kit is a three layer structure.



To allow for a sleeker look than the conventional three-layer structure, we adopted the design of the bottom case and the middle has a gap in between top and bottom. The silver waist line in the picture is part of the bottom case .

The plate is sandwhiched bottom case and the top case, and then the middle frame is fixed to the top frame to achieve this effect.

note:The plate has cut outs that supports the ability to remove stabs without complete disassembly,it is friendly to somebody new to this hobby.


Because it is a big layout, so we use the split plate and PCB.

This is done to maximize the Gasket experience. Originally, we planned to learn the popular large flex cut plate and PCB, after proofing, we found that such a long cut PCB would lead to the consistency of typing is poor, the middle will be very soft, and the harder it will be towards both sides. It was soft but it sacrificed too much consistency. So we changed the design.





The newly designed slotting method can achieve a relatively balanced state in soft projectile and feel consistency. It's a way that works for most people.

we also changed the original plate thickness from 1.6mm into 1+0.5mm, that is, 1mm plate (PC, POM, FR4) and 0.5mm silicone pad (shaw 40). The advantage of this is that when the switch is pressed, the switch will put pressure on the silcone pad in the first time. The reason why we adopted the hardness of 40 is that the hardness of 40 is relatively neutral, which can be of great help in the consistency of resilience.

we have one more layout question to address:
we will use two kinds of PCB (soldered and hot swap) (there will also be two kinds of plates). The soldered version can be compatible with large layout (recommended), but the hot swap version cannot be compatible with large layout, because the fixation of large keys and the easy disassembly of stablizer axis need to be considered, so hot swap can only be compatible with one kind of layout. (QMK&VIA)

All that's left is some basic information.

Material: 6063
Weight: brass (transparent electrophoresis)
Angle: 7
Fixed mode: Gasket

color  :

Anode: ano black , ano silver, ano gray, ano orange  (1655C),ano red  (186C)

Electrophoresis: e white, e yellow, e pink, e green (grass green)



Please fill out the IC Form


How:

Instock:200sets(e-white+e-yellow 80 sets,ano black+ano orange 60 sets,ano black+ano silver 60 sets)
GB: 300 units( no color limit, but only fixed combinations can be selected)
Price: standard:298 usd

When: November 10th 8:00(Beijing time)


more pics:






discord

update history:2021.09,28  IC
                       2021.10.01 update more pics
                       2021.10.21 update more GB color details
« Last Edit: Thu, 21 October 2021, 01:09:06 by windlabs »

Offline JonoColwell

  • Posts: 35
Re: [IC] wind X a large layout keyboard
« Reply #1 on: Tue, 28 September 2021, 01:33:00 »
Love me some windex


Offline Mecxs

  • Posts: 57
Re: [IC] wind X a large layout keyboard
« Reply #2 on: Tue, 28 September 2021, 01:49:33 »
« Last Edit: Tue, 28 September 2021, 07:51:13 by Mecxs »

Offline The0rigina1

  • Posts: 61
  • fumoposting
Re: [IC] wind X a large layout keyboard
« Reply #3 on: Tue, 28 September 2021, 02:56:51 »
I love no prototype but have a price point already.

Offline ryanaleksander

  • Posts: 2
Re: [IC] wind X a large layout keyboard
« Reply #4 on: Tue, 28 September 2021, 03:03:55 »
Looks nice, if it's southpaw it would be an instant-buy for me. Too bad it's not. Good luck though.

Offline windlabs

  • Thread Starter
  • Posts: 8
Re: [IC] wind X a large layout keyboard
« Reply #5 on: Tue, 28 September 2021, 03:45:53 »
Looks nice, if it's southpaw it would be an instant-buy for me. Too bad it's not. Good luck though.
already have protype

Offline BouncyChillups

  • Formerly PleasantChaos
  • Posts: 48
  • Location: Germany
Re: [IC] wind X a large layout keyboard
« Reply #6 on: Tue, 28 September 2021, 07:07:18 »
800 units for a first-time runner sounds fishy.

Offline juniper37559

  • Posts: 6
Re: [IC] wind X a large layout keyboard
« Reply #7 on: Tue, 28 September 2021, 08:10:24 »
800 units for a first-time runner sounds fishy.
I'm doubt too because you also claimed 200 instock 300 GB on Zfrontier. So you're doing total 1500 units QC?. :eek: That's a huge challenge especially for a first-time runner.

Offline AshF

  • Posts: 94
Re: [IC] wind X a large layout keyboard
« Reply #8 on: Wed, 29 September 2021, 09:20:38 »
Superb layout and defo up my street. Would be nice to have some distinguishing features however, anything to make it look more than 'just another KB'. Lay-out wise. love it.

It would be nice to know a little more about your background (as above) to help support / provide confidence that you can pull this off.
« Last Edit: Thu, 30 September 2021, 11:24:58 by AshF »

Offline STUDIOBLB

  • Posts: 35
Re: [IC] wind X a large layout keyboard
« Reply #9 on: Wed, 29 September 2021, 13:08:18 »
Love this design! Would make for a great work keyboard!

Offline 1391401

  • Posts: 401
  • MX CLEAR
Re: [IC] wind X a large layout keyboard
« Reply #10 on: Wed, 29 September 2021, 14:59:57 »
Can you elaborate on: The newly designed slotting method can achieve a relatively balanced state in soft projectile and feel consistency. It's a way that works for most people.
People I've given money to from this webform who never respond to me and have not shipped me anything: ctrlalt.io 1 2, Team Readline Reputable alternatives to GH group buys: http://pimpmykeyboard.com, https://www.massdrop.com,

Offline windlabs

  • Thread Starter
  • Posts: 8
Re: [IC] wind X a large layout keyboard
« Reply #11 on: Wed, 29 September 2021, 19:16:43 »
Can you elaborate on: The newly designed slotting method can achieve a relatively balanced state in soft projectile and feel consistency. It's a way that works for most people.
pls see the flex cut on pcb

Offline The0rigina1

  • Posts: 61
  • fumoposting
Re: [IC] wind X a large layout keyboard update more pics
« Reply #12 on: Mon, 04 October 2021, 03:38:54 »
Finally, prototype pics. Nice.

Offline Michele

  • Posts: 5
Re: [IC] wind X a large layout keyboard
« Reply #13 on: Mon, 04 October 2021, 08:16:48 »
Looks nice, if it's southpaw it would be an instant-buy for me. Too bad it's not. Good luck though.
already have protype
are there renders or photos of the southpaw version? very interested

Offline linell

  • Posts: 16
  • no foam, use clickies
Re: [IC] wind X a large layout keyboard update more pics
« Reply #14 on: Mon, 04 October 2021, 18:28:44 »
hoping southpaw comes to fruition
we need more :)

Offline mr_foggy

  • Posts: 138
  • Location: europe aka prices +30%
Re: [IC] wind X a large layout keyboard update more pics
« Reply #15 on: Thu, 21 October 2021, 05:56:53 »
looked amazing and sounded even better in Alexotos' stream yesterday. this board has me sold, e-pink please

Offline LMarci

  • Posts: 1
Re: [IC] wind X a large layout keyboard update more pics
« Reply #16 on: Sun, 24 October 2021, 08:12:45 »
Nice lumina sides

Offline Beegstation

  • Posts: 3
Re: [IC] wind X a large layout keyboard update more pics
« Reply #17 on: Sun, 24 October 2021, 22:15:48 »
This board is so cool, but I'm not sure where I will be able to buy it. What will the vendor be for the in stock buy?

Thanks in advance.