Author Topic: GH60 Group Buy (Salvage Mode: Enabled - Update in OP) (Read 1624570 times)

TDub · « **Reply #3500 on:** Thu, 08 May 2014, 02:14:05 »

Round 1 isn't done..... so what is the point of talking about a round 2.

Quote from: duq on Tue, 06 May 2014, 18:20:56

Sorry for asking again, but I needed to change my shipping address and I figured since final products are being shipped to distributors, I should figure out how to verify where things are really going .

So how do I change my address?

Also need to change shipping address.

Qipz · « **Reply #3501 on:** Thu, 08 May 2014, 03:26:09 »

Quote from: duq on Tue, 06 May 2014, 18:20:56

Sorry for asking again, but I needed to change my shipping address and I figured since final products are being shipped to distributors, I should figure out how to verify where things are really going .

So how do I change my address?

Also need to change shipping address.
[/quote]

In long lasting GB's they ask for shipping addresses before sending because when dealing with a large group over a large amount of time there will always be people moving, Don't worry the shipping will be a-okay

Harrowed · « **Reply #3502 on:** Thu, 08 May 2014, 05:42:55 »

Quote from: Lubed Up Slug on Thu, 08 May 2014, 01:47:26

Is there ever going to be a round 2 on this....

There is one similar DIY keyboard coming: http://geekhack.org/index.php?topic=57948.0
There will be also several GH60's going straight to aftermarket when this GB finishes.

Turkishrambo · « **Reply #3503 on:** Thu, 08 May 2014, 08:49:05 »

i believe jdcarpe can do address changes. I did mine recently through him.

Lubed Up Slug · « **Reply #3504 on:** Thu, 08 May 2014, 20:25:30 »

Quote from: Harrowed on Thu, 08 May 2014, 05:42:55

Quote from: Lubed Up Slug on Thu, 08 May 2014, 01:47:26
Is there ever going to be a round 2 on this....
There is one similar DIY keyboard coming: http://geekhack.org/index.php?topic=57948.0
There will be also several GH60's going straight to aftermarket when this GB finishes.

Well if there are any left overs or cancellations, I will gladly buy a PCB.

niichie · « **Reply #3505 on:** Fri, 09 May 2014, 00:43:46 »

If there are any cancellations for an ISO or ANSI HHKB style board I would gladly purchase it.

JBert · « **Reply #3506 on:** Fri, 09 May 2014, 02:00:30 »

No cancellations are allowed at this point, otherwise the groupbuy would get too complex.

Just wait for people to throw them on the market.

niichie · « **Reply #3507 on:** Fri, 09 May 2014, 03:06:39 »

Quote from: JBert on Fri, 09 May 2014, 02:00:30

No cancellations are allowed at this point, otherwise the groupbuy would get too complex.

Just wait for people to throw them on the market.

Totally justified, I wish there were other HHKB layout group buys that looked this promising, not looking forward to getting bled dry by the markup prices that will likely get posted.

SpAmRaY · « **Reply #3508 on:** Fri, 09 May 2014, 10:01:20 »

Quote from: niichie on Fri, 09 May 2014, 03:06:39

Quote from: JBert on Fri, 09 May 2014, 02:00:30
No cancellations are allowed at this point, otherwise the groupbuy would get too complex.

Just wait for people to throw them on the market.

Totally justified, I wish there were other HHKB layout group buys that looked this promising, not looking forward to getting bled dry by the markup prices that will likely get posted.

The GH60 is cool and all but you also might want to check this out if your after a HHKB layout MX board.

http://geekhack.org/index.php?topic=58074.0

duq · « **Reply #3509 on:** Fri, 09 May 2014, 15:46:45 »

Quote from: SpAmRaY on Fri, 09 May 2014, 10:01:20

Quote from: niichie on Fri, 09 May 2014, 03:06:39
Quote from: JBert on Fri, 09 May 2014, 02:00:30
No cancellations are allowed at this point, otherwise the groupbuy would get too complex.

Just wait for people to throw them on the market.

Totally justified, I wish there were other HHKB layout group buys that looked this promising, not looking forward to getting bled dry by the markup prices that will likely get posted.

The GH60 is cool and all but you also might want to check this out if your after a HHKB layout MX board.

http://geekhack.org/index.php?topic=58074.0

ALU Case, plate, and PCB for $220

. Quite a deal IMO

totocaster · « **Reply #3510 on:** Mon, 19 May 2014, 14:10:54 »

Hi! My first post here. I've been watching this forum for a while and I have to say it's a great community!

Back on topic. Can I still fill out the order form to get new GH60 batch? What should I do now to in order to be able to get one?

Thanks!

SpAmRaY · « **Reply #3511 on:** Mon, 19 May 2014, 14:16:25 »

Quote from: totocaster on Mon, 19 May 2014, 14:10:54

Hi! My first post here. I've been watching this forum for a while and I have to say it's a great community!

Back on topic. Can I still fill out the order form to get new GH60 batch? What should I do now to in order to be able to get one?

Thanks!

Ordering is long over with but if you wait these will eventually be delivered and there will be tons of them for sale in the classifieds.

sth · « **Reply #3512 on:** Mon, 19 May 2014, 14:17:54 »

Quote from: totocaster on Mon, 19 May 2014, 14:10:54

Hi! My first post here. I've been watching this forum for a while and I have to say it's a great community!

Back on topic. Can I still fill out the order form to get new GH60 batch? What should I do now to in order to be able to get one?

Thanks!

Welcome Thomas

totocaster · « **Reply #3513 on:** Mon, 19 May 2014, 14:25:39 »

Quote from: SpAmRaY on Mon, 19 May 2014, 14:16:25

Ordering is long over with but if you wait these will eventually be delivered and there will be tons of them for sale in the classifieds.

So I won't be able to get it from any keyboard shops online any soon? Classifieds availability is good news nevertheless. Thanks!

Quote from: sth on Mon, 19 May 2014, 14:17:54

Welcome Thomas

It's (or rather, I'm) Toto.

Thanks for welcome!

sth · « **Reply #3514 on:** Mon, 19 May 2014, 14:28:44 »

Quote from: totocaster on Mon, 19 May 2014, 14:25:39

Quote from: SpAmRaY on Mon, 19 May 2014, 14:16:25
Ordering is long over with but if you wait these will eventually be delivered and there will be tons of them for sale in the classifieds.

So I won't be able to get it from any keyboard shops online any soon? Classifieds availability is good news nevertheless. Thanks!

Quote from: sth on Mon, 19 May 2014, 14:17:54
Welcome Thomas

It's (or rather, I'm) Toto. Thanks for welcome!

Sorry Reid

JonasDK · « **Reply #3515 on:** Mon, 19 May 2014, 16:17:42 »

So what's the status atm?

mkaito · « **Reply #3516 on:** Mon, 19 May 2014, 17:40:03 »

First post was updated rather recently.

Poom · « **Reply #3517 on:** Tue, 20 May 2014, 15:35:49 »

hi guys, can anyone tell me whether or not the orders can be shipped out by the end of May or early June at the latest?

I am moving again... in the middle of June, so I may need to change my address, this time from Europe to Asia, so quite a big one.

This is going to be a third time I am moving since the start of this GB, lol.

f4zzzx · « **Reply #3518 on:** Tue, 20 May 2014, 17:25:34 »

Hi guys,

What is the first column in the GH60 order page ( PD, involved... ) ?

I appear well at the end of the page, is it good or I need to confirm ?

Thx

JonasDK · « **Reply #3519 on:** Tue, 20 May 2014, 17:33:10 »

Quote from: f4zzzx on Tue, 20 May 2014, 17:25:34

Hi guys,

What is the first column in the GH60 order page ( PD, involved... ) ?

I appear well at the end of the page, is it good or I need to confirm ?

Thx

I think PD means paid.

BlueBär · « **Reply #3520 on:** Tue, 20 May 2014, 17:35:38 »

Quote from: f4zzzx on Tue, 20 May 2014, 17:25:34

What is the first column in the GH60 order page ( PD, involved... ) ?

I appear well at the end of the page, is it good or I need to confirm ?

When did you enter your data into the form?

f4zzzx · « **Reply #3521 on:** Tue, 20 May 2014, 17:41:44 »

Quote

I think PD means paid

Ok thank you.

Quote

When did you enter your data into the form?

An hour ago...

BlueBär · « **Reply #3522 on:** Tue, 20 May 2014, 17:45:43 »

Quote from: f4zzzx on Tue, 20 May 2014, 17:41:44

An hour ago...

Yeah that's about 323 days too late.

f4zzzx · « **Reply #3523 on:** Tue, 20 May 2014, 17:51:07 »

Quote

Yeah that's about 323 days too late.

I came across the topic yesterday and I'm a bit rushed.

When I saw that the form was still online I filled directly.

No GH60 for me

mashby · « **Reply #3524 on:** Tue, 20 May 2014, 17:55:27 »

Quote from: f4zzzx on Tue, 20 May 2014, 17:51:07

Quote
Yeah that's about 323 days too late.

I came across the topic yesterday and I'm a bit rushed.

When I saw that the form was still online I filled directly.

No GH60 for me

There should be plenty in the Classifieds section once everyone begins receiving theirs.

In the meantime, welcome to GeekHack! Hope you'll stay and participate in the community.

p3lim · « **Reply #3525 on:** Wed, 21 May 2014, 10:37:24 »

Should really update OP with a notice that the orders are closed

nubbinator · « **Reply #3526 on:** Wed, 21 May 2014, 10:46:13 »

Quote from: p3lim on Wed, 21 May 2014, 10:37:24

Should really update OP with a notice that the orders are closed

It would have to be a mod edit since WFD went AWOL.

SpAmRaY · « **Reply #3527 on:** Wed, 21 May 2014, 10:46:54 »

Quote from: nubbinator on Wed, 21 May 2014, 10:46:13

Quote from: p3lim on Wed, 21 May 2014, 10:37:24
Should really update OP with a notice that the orders are closed

It would have to be a mod edit since WFD went AWOL.

looks like jdcarpe took care of it

jdcarpe · « **Reply #3528 on:** Wed, 21 May 2014, 10:52:43 »

Yeah, and everyone that put in orders after the deadline, those rows are about to be deleted from the spreadsheet. Nice try.

riotonthebay · « **Reply #3529 on:** Wed, 21 May 2014, 10:56:43 »

Quote from: jdcarpe on Wed, 21 May 2014, 10:52:43

Yeah, and everyone that put in orders after the deadline, those rows are about to be deleted from the spreadsheet. Nice try.

Qipz · « **Reply #3530 on:** Thu, 22 May 2014, 14:33:54 »

I just noticed that getting ISO key caps is very very hard compared to ANSI key caps
I have assembly for my GH60 with an ISO plate, I was wondering if it was possible to change that to ANSI? I know no changes in orders but since this is isnt related to any physical orders I'd guess it's up to the assembler for Europe?

Btw I took over the order for Numerus, if that helps. (Still isnt changed to my name in the order confirmations)

jonathanyu · « **Reply #3531 on:** Thu, 22 May 2014, 18:06:12 »

Quote from: Qipz on Thu, 22 May 2014, 14:33:54

I just noticed that getting ISO key caps is very very hard compared to ANSI key caps
I have assembly for my GH60 with an ISO plate, I was wondering if it was possible to change that to ANSI? I know no changes in orders but since this is isnt related to any physical orders I'd guess it's up to the assembler for Europe?

Btw I took over the order for Numerus, if that helps. (Still isnt changed to my name in the order confirmations)

Getting ISO dyesub is much easier than ANSI

Qipz · « **Reply #3532 on:** Thu, 22 May 2014, 18:10:57 »

I don't know about dyesub but so far pretty much all shops and GB's mainly sell ANSI sets and only a small group sell ISO kits, it seems like a wiser investment to get ANSI straight off the bat

IvanIvanovich · « **Reply #3533 on:** Thu, 22 May 2014, 20:08:57 »

It depends a lot on what caps you like, and in which languages... but ISO DE Cherry doubleshots or dyesub from older G80/G81 is not at all hard to find used on ebay for decent price the majority of the time. BE is not easy, but you may find FR, ES, IT sometimes others.

Pacifist · « **Reply #3534 on:** Thu, 22 May 2014, 20:15:26 »

ANSI is the most desireable, and thus there are more ANSI sets produced than ISO. Same reason why ISO is cheaper and easier to get: all the desireable ANSI has already been taken

domoaligato · « **Reply #3535 on:** Thu, 22 May 2014, 22:49:21 »

Quote from: Pacifist on Thu, 22 May 2014, 20:15:26

ANSI is the most desireable, and thus there are more ANSI sets produced than ISO. Same reason why ISO is cheaper and easier to get: all the desireable ANSI has already been taken

not even going to respond.

Quote from: jonathanyu on Thu, 22 May 2014, 18:06:12

Getting ISO dyesub is much easier than ANSI

+1

ebay search for g80's
http://www.ebay.com/sch/i.html?_sacat=0&_nkw=cherry+g80&_frs=1

and g81's
http://www.ebay.com/sch/i.html?_sacat=0&_nkw=cherry+g81&_frs=1

most of the results are iso.

Qipz · « **Reply #3536 on:** Fri, 23 May 2014, 03:12:18 »

Seems like most of you guys are talking about actual keyboards though, I only wanted keycaps, back to topic though, is there any way to change how my keyboard will be assembled?

BlueBär · « **Reply #3537 on:** Fri, 23 May 2014, 03:24:39 »

Quote from: Qipz on Fri, 23 May 2014, 03:12:18

Seems like most of you guys are talking about actual keyboards though, I only wanted keycaps, back to topic though, is there any way to change how my keyboard will be assembled?

Most people buy those boards just for the caps and switches.

At this point I think you can only ask them to skip assembly for your board.

Edit: I forgot, I have some lasered white BE caps you can have for the cost of shipping. They are a bit faded but will do the job.

domoaligato · « **Reply #3538 on:** Fri, 23 May 2014, 03:27:21 »

you are asking for a plate change. so that is a order change and order changes are not possible at this point as everything has been made already. you ordered a iso plate and it has already been cut. so you can not make changes at this point to your plate configuration.

you have two options really.
1. if you ordered with pcb mount stabilizers ask the assembler to assemble it without the plate in ansi instead of iso.
2. receive everything unassembled and trade plates via classifieds then arrange someone else to assemble it for you.

do not take this the wrong way, it is just way to late to make order changes and it has been copy and pasted over and over through out this thread.

Qipz · « **Reply #3539 on:** Fri, 23 May 2014, 03:34:54 »

Qh crap, I didnt think about the plate mounted stabs, nah I'll be ok with ISO in that case, I'll just have to look extra hard for some nice blank ISO keycaps

BlueBär · « **Reply #3540 on:** Fri, 23 May 2014, 03:43:53 »

Quote from: Qipz on Fri, 23 May 2014, 03:34:54

Qh crap, I didnt think about the plate mounted stabs, nah I'll be ok with ISO in that case, I'll just have to look extra hard for some nice blank ISO keycaps

https://www.teraset.net/ducky.php
Scroll down to accessories.

Qipz · « **Reply #3541 on:** Fri, 23 May 2014, 03:58:00 »

Quote from: BlueBär on Fri, 23 May 2014, 03:43:53

Quote from: Qipz on Fri, 23 May 2014, 03:34:54
Qh crap, I didnt think about the plate mounted stabs, nah I'll be ok with ISO in that case, I'll just have to look extra hard for some nice blank ISO keycaps

https://www.teraset.net/ducky.php
Scroll down to accessories.

Oh man, thanks!

domoaligato · « **Reply #3542 on:** Fri, 23 May 2014, 09:00:56 »

The dolch groupbuy has a iso kit also ^_^

Tarzan · « **Reply #3543 on:** Fri, 23 May 2014, 09:25:58 »

Quote from: domoaligato on Fri, 23 May 2014, 09:00:56

The dolch groupbuy has a iso kit also ^_^

Actually, I've managed to get ISO kits for almost every group buy I've bought into. Some like the Tai Hao and Vortex sets don't have ISO keys, but more do than not.

Dr. MaRV · « **Reply #3544 on:** Tue, 27 May 2014, 05:07:23 »

What is the latest status of the GH60? I haven't followed this thread for a few month, but i'm still waiting for delivery of my GH60. Are the Boards shipped or not? My location is germany...

BlueBär · « **Reply #3545 on:** Tue, 27 May 2014, 05:21:39 »

Quote from: Dr. MaRV on Tue, 27 May 2014, 05:07:23

What is the latest status of the GH60? I haven't followed this thread for a few month, but i'm still waiting for delivery of my GH60. Are the Boards shipped or not? My location is germany...

No GH60s apart from prototypes have been shipped yet. You can find the status in the first post of this thread although I think plates are done now. We really need a source for stabilizers (that was one of WFDs jobs but he has gone MIA) but apart from that we're looking good.

Heliosphere · « **Reply #3546 on:** Wed, 28 May 2014, 18:14:00 »

Is there a chance for another GH60 group buy in the future?

BlueBär · « **Reply #3547 on:** Wed, 28 May 2014, 18:25:29 »

Quote from: Heliosphere on Wed, 28 May 2014, 18:14:00

Is there a chance for another GH60 group buy in the future?

Yes, they might also get sold by mk.com.

cgbuen · « **Reply #3548 on:** Fri, 30 May 2014, 00:34:28 »

I'm moving in two weeks, so like a few others, I was also wondering how I can change my address.

BlueBär · « **Reply #3549 on:** Fri, 30 May 2014, 02:09:12 »

Quote from: cgbuen on Fri, 30 May 2014, 00:34:28

I'm moving in two weeks, so like a few others, I was also wondering how I can change my address.

Send one of the GB organizers (not WhiteFireDragon though) a message.

News:

Author Topic: GH60 Group Buy (Salvage Mode: Enabled - Update in OP) (Read 1624570 times)