geekhack
geekhack Community => Keyboards => Topic started by: Kaliet on Thu, 11 December 2014, 02:13:34
-
As per the requests of some people who wanted to see a TKL,
I share some photos of a Keyboard that I made a while ago.
I miss this one. :)
(http://cfile5.uf.tistory.com/image/2759863C52D618B6383A13)
(http://cfile30.uf.tistory.com/image/254FCE3C52D618B6061BD6)
(http://cfile1.uf.tistory.com/image/2255BA3C52D618B736F2EF)
(http://cfile29.uf.tistory.com/image/22726C3C52D618B72BEEA7)
(http://cfile26.uf.tistory.com/image/2441FA3C52D618B70C07E3)
(http://cfile25.uf.tistory.com/image/2415943C52D618B81EA2CE)
(http://cfile4.uf.tistory.com/image/22506F3C52D618B806A3F2)
(http://cfile28.uf.tistory.com/image/25676C3C52D618B831AABA)
(http://cfile3.uf.tistory.com/image/210E423C52D618B921720B)
(http://cfile9.uf.tistory.com/image/2270DB3C52D618B92C6D57)
-
damn it this is sexy, how much do i need to hand over now....
-
damn it this is sexy, how much do i need to hand over now....
If you want one like this, mail me to my email address. :)
-
Your on a roll Kaliet.
-
Have more photos? Also, are these consumer products? Or personal projects?
-
:eek:
that looks amazzing!with two "Z"s!
must cost a pretty penny to make....
:thumb:
-
Looks great!
-
alu plate?
-
Most impressive.
-
Wow, these look great :eek: what's the price range on something like this?
-
First full layout, then tkl, what's next ? 60% ? :D
Really nice board and pics Kaliet :)
-
These posts should go in media. They're media, not discussion.
For future reference.
-
What did you use this keyboard for?
I have blacks and I use them for programming and gaming, but my hand can start to hurt after a long while of typing.
Hopefully I'm getting a Poker 2 with browns which should reduce the pain.
-
What did you use this keyboard for?
I have blacks and I use them for programming and gaming, but my hand can start to hurt after a long while of typing.
Hopefully I'm getting a Poker 2 with browns which should reduce the pain.
I use blacks as all purpose switches.
-
What case is that? Kinda looks like a gon
-
If I could do it without indecency I would raise 3 thumbs up for this one!
Very very Very nice.
-
That keyboard is extra nice. Great work! :thumb:
-
Your on a roll Kaliet.
Thanks. :)
:eek:
that looks amazzing!with two "Z"s!
must cost a pretty penny to make....
:thumb:
Thanks. Yeah, it took much. :)
Looks great!
Also thanks! :)
alu plate?
Made with all aluminum.
Most impressive.
Many thanks. :)
Wow, these look great :eek: what's the price range on something like this?
Thanks. :) You can mail me to my email address for that.
First full layout, then tkl, what's next ? 60% ? :D
Really nice board and pics Kaliet :)
Thank you for the compliment. :)
These posts should go in media. They're media, not discussion.
For future reference.
Is it a little inappropriate to post this here?
Please understand me. I'm still a newbie here. ;)
What did you use this keyboard for?
I have blacks and I use them for programming and gaming, but my hand can start to hurt after a long while of typing.
Hopefully I'm getting a Poker 2 with browns which should reduce the pain.
Actually, I used this for selling. Haha. I made this on order. :)
Normally, I use 50g - 55g linear black for my daily use.
And there is no other usage of keyboards. ;D
What case is that? Kinda looks like a gon
We all are living on the same planet and GON and I are in the same country, same city though we haven't met yet. :)
If I could do it without indecency I would raise 3 thumbs up for this one!
Very very Very nice.
Thanks thanks thanks! ;)
That keyboard is extra nice. Great work! :thumb:
Thank you extra. :)
-
Whoa, your inbox is going to be flooded with PMs!! And i'm going to be ine of them..lol
-
Whoa, your inbox is going to be flooded with PMs!! And i'm going to be ine of them..lol
Not much actually. I prefer getting emails. ;)
-
this is keyboard porn :D
-
this is keyboard porn :D
Hahahahaha! :D
-
What case is that? Kinda looks like a gon
We all are living on the same planet and GON and I are in the same country, same city though we haven't met yet. :)
lol you went in a circle and still haven't answer my question. XP
SO what case is that?
-
What case is that? Kinda looks like a gon
We all are living on the same planet and GON and I are in the same country, same city though we haven't met yet. :)
lol you went in a circle and still haven't answer my question. XP
SO what case is that?
Sorry. It is aluminum. :)
-
What case is that? Kinda looks like a gon
We all are living on the same planet and GON and I are in the same country, same city though we haven't met yet. :)
lol you went in a circle and still haven't answer my question. XP
SO what case is that?
Sorry. It is aluminum. :)
THE TROLLL LIVES IN THIS ONE!!!!
BUT PLEASE TELL ME I BEG U QQ
-
THE TROLLL LIVES IN THIS ONE!!!!
BUT PLEASE TELL ME I BEG U QQ
I prefer full-size due to the occasional use i have for the numberpad (it really is helpful for g-mod) and an excuse to fill more desk-space with pretty leds. Question: what parts did you use(pcb,case,etc.)?
My desk is pretty wide so I have no issues using a full layout. :)
I used Monster Mask's A87-EX PCB and I designed the aluminum housing and assembled myself. That is what I do. :)
Please take a visit to http://22kbd.com for more keyboards.
-
@hellcatz
GON and Kaliet make similar keyboards but they are different in a few ways.
GON and Kaliet both make their own PCB. I know GON uses his NerD pcb, and I'm not sure which PCB Kaliet uses but I think he designed it himself.
GON uses polycarbonate for the middle layer, his PCB has pads for SMD leds to achieve the glowing effect. I've only seen Kaliet's keyboards with an anodized aluminum middle layer.
I think Kaliets 60% keyboard is smaller than GONs 60%, the TKL looks similar in size. The USB placement is also different.
I think the feet are the same too.
@Kaliet, welcome to geekhack! How do we place an order? Is there pricing information available?
Do you have a picture of the bottom of the keyboard? (the feet)
Edit: Also, please correct me if I am wrong about anything above.
-
Man, you forgot to include NSFW in the title! :eek:
This is downright gorgeous. Fantastic work!
-
What case is that? Kinda looks like a gon
We all are living on the same planet and GON and I are in the same country, same city though we haven't met yet. :)
lol you went in a circle and still haven't answer my question. XP
SO what case is that?
Sorry. It is aluminum. :)
THE TROLLL LIVES IN THIS ONE!!!!
BUT PLEASE TELL ME I BEG U QQ
Tell you what? Sorry, my understanding isn't that good.
I only understand the English language. ;)
Man, you forgot to include NSFW in the title! :eek:
This is downright gorgeous. Fantastic work!
Thanks. :)
-
@hellcatz
GON and Kaliet make similar keyboards but they are different in a few ways.
GON and Kaliet both make their own PCB. I know GON uses his NerD pcb, and I'm not sure which PCB Kaliet uses but I think he designed it himself.
GON uses polycarbonate for the middle layer, his PCB has pads for SMD leds to achieve the glowing effect. I've only seen Kaliet's keyboards with an anodized aluminum middle layer.
I think Kaliets 60% keyboard is smaller than GONs 60%, the TKL looks similar in size. The USB placement is also different.
I think the feet are the same too.
@Kaliet, welcome to geekhack! How do we place an order? Is there pricing information available?
Do you have a picture of the bottom of the keyboard? (the feet)
Edit: Also, please correct me if I am wrong about anything above.
Good analysis! And thank you for welcoming. :)
However, I don't make my own PCBs whereas GON does. :)
I only asked Monster Mask to design a PCB, that is, 22Mini-RGB. He designed it to my taste and that's it.
Mostly I use his PCBs and sometimes GON's, too.
He is far advanced thatn I am in everything. :)
And I use acrylic and PC midlayers as well as aluminum. ;)
If you visit my blog, you can see some more: http://22kbd.com :D
If you have any questions regarding price and stuff, please send me emails. ;)
-
What case is that? Kinda looks like a gon
i like the usb on this better than the gon.
always liked the simple cases.
If you visit my blog, you can see some more: http://22kbd.com :D
If you have any questions regarding price and stuff, please send me emails. ;)
OOH you're the 22kbd guy? I'm a big fan!
-
What case is that? Kinda looks like a gon
i like the usb on this better than the gon.
always liked the simple cases.
If you visit my blog, you can see some more: http://22kbd.com :D
If you have any questions regarding price and stuff, please send me emails. ;)
OOH you're the 22kbd guy? I'm a big fan!
Didn't know I have one. Just kidding. :P
Thanks for being one. ;)
-
The keyboard is really nice but I feel like it looks like a Christmas Tree once the leds are on.
-
I saw your wts post and was stunned at those customs, but was put off because of the 75% layout and when it was 60% it was in a switch that I didn't like. What I liked most was your freakin amazing prices!
p.s. will PM, mind is just exploding.
-
It looks so amazing!
-
Beautiful keyboard, I love it!