Post by: hwood34 on Wed, 31 December 2014, 11:13:56
DrHubblePhD
Interest Form (https://docs.google.com/forms/d/13e8A5961-Zc1g9cWpoc-XW1gaXWjETGe-4DwTNk8ye4/viewform?usp=send_form)
Specs:
- 1.5mm Carbon Fiber
- Skeleton style case (top/plate, bottom, standoffs in middle)
- Universally compatible plate
More renders:
More
(http://i.imgur.com/JPyQDSt.jpg)
(http://i.imgur.com/2jsBMiU.jpg)
(http://puu.sh/h8atp/343980def6.jpg)
(http://i.imgur.com/QcUo7BP.jpg)
Joey Quinn
Post by: Ripudio on Wed, 31 December 2014, 11:31:53
What about making a poker compatible plate out of CF?
Post by: hwood34 on Wed, 31 December 2014, 11:35:38
I might be interested depending on the details. Can it be made so that switches are removable?Yep, one of the options on the IC form is for a notched switchplate. And the top would be compatible with a Poker, though I'm not offering just plates at this time
What about making a poker compatible plate out of CF?
Post by: Ripudio on Wed, 31 December 2014, 11:53:07
Post by: iamtootallforthis on Wed, 31 December 2014, 13:04:34
Post by: ideus on Wed, 31 December 2014, 13:17:46
Post by: hwood34 on Wed, 31 December 2014, 13:19:30
It would be clear to call the project "CF60% carbon fiber plates set". These are not "a case".
These are "a case":
This is an interest check for a 60% case made out of carbon fiber, a durable and light material. The case will fit all standard 60% PCBs. It will consist of a top layer, also acting as the switchplate, and a bottom layer. In between the two will be spacers, similar to the JD40 case
Post by: Melvang on Wed, 31 December 2014, 14:13:00
Post by: nubbinator on Wed, 31 December 2014, 14:16:01
Post by: heedpantsnow on Wed, 31 December 2014, 14:20:23
Post by: hwood34 on Wed, 31 December 2014, 14:26:23
Carbon fiber burns by laser. And will the carbon fiber have a core material it's built up around? If you want to do some prototypes, I may be able to get my cousin to prototype since I know he has access to a waterjet at his work and has offered to do some stuff when he visited in September or October.Hmm, that sounds pretty cool. PM'd
Post by: CPTBadAss on Thu, 29 January 2015, 06:34:23
So the carbon fiber will be made into two solid plates then cut after it's formed and solidified right? Because as is, cutting a sheet of carbon fiber with waterjet would be monumental overkill.
Post by: hwood34 on Thu, 29 January 2015, 07:00:56
Could you clarify how this is going to be made? Are you making a skeleton style case like the ones JD made and then using waterjet to cut out the switch holes?Pretty much yeah. I'm gonna sit down with swill's tool to make a CAD file to get a better price estimate
So the carbon fiber will be made into two solid plates then cut after it's formed and solidified right? Because as is, cutting a sheet of carbon fiber with waterjet would be monumental overkill.
Post by: hwood34 on Tue, 24 February 2015, 21:49:00
Post by: Joey Quinn on Wed, 25 February 2015, 00:47:14
anyone got the files for a 60% layout plate I could use for this? A full skeleton case would be even better ;)
Swill's plate maker would probably work, if you want something else I could probably make one tomorrow if I finish my research paper early.
Post by: hwood34 on Wed, 25 February 2015, 22:23:29
I've had some issues with it, if it wouldn't be a problem that'd be awesomeanyone got the files for a 60% layout plate I could use for this? A full skeleton case would be even better ;)
Swill's plate maker would probably work, if you want something else I could probably make one tomorrow if I finish my research paper early.
Post by: Joey Quinn on Wed, 25 February 2015, 22:39:38
Ok, I'll work on it tonight, what layout options do you want?I've had some issues with it, if it wouldn't be a problem that'd be awesomeanyone got the files for a 60% layout plate I could use for this? A full skeleton case would be even better ;)
Swill's plate maker would probably work, if you want something else I could probably make one tomorrow if I finish my research paper early.
Post by: hwood34 on Wed, 25 February 2015, 22:43:01
Any way it could be one of the ANSI/ISO multi compatible layouts?Ok, I'll work on it tonight, what layout options do you want?I've had some issues with it, if it wouldn't be a problem that'd be awesomeanyone got the files for a 60% layout plate I could use for this? A full skeleton case would be even better ;)
Swill's plate maker would probably work, if you want something else I could probably make one tomorrow if I finish my research paper early.
Post by: Joey Quinn on Wed, 25 February 2015, 22:45:20
Probably, just to be clear, am I making a JD style case or the bent infinity case?Any way it could be one of the ANSI/ISO multi compatible layouts?Ok, I'll work on it tonight, what layout options do you want?I've had some issues with it, if it wouldn't be a problem that'd be awesomeanyone got the files for a 60% layout plate I could use for this? A full skeleton case would be even better ;)
Swill's plate maker would probably work, if you want something else I could probably make one tomorrow if I finish my research paper early.
Post by: hwood34 on Wed, 25 February 2015, 22:46:24
the JD style :thumb:Probably, just to be clear, am I making a JD style case or the bent infinity case?Any way it could be one of the ANSI/ISO multi compatible layouts?Ok, I'll work on it tonight, what layout options do you want?I've had some issues with it, if it wouldn't be a problem that'd be awesomeanyone got the files for a 60% layout plate I could use for this? A full skeleton case would be even better ;)
Swill's plate maker would probably work, if you want something else I could probably make one tomorrow if I finish my research paper early.
Post by: Joey Quinn on Wed, 25 February 2015, 22:53:34
the JD style :thumb:
Any idea what size you want the bezel to be?
Post by: Joey Quinn on Wed, 25 February 2015, 23:02:24
For reference this is a 1cm bezel, not sure what the JD40 is but I think it's a bit larger.
Post by: hwood34 on Wed, 25 February 2015, 23:08:55
(Attachment Link)That should work. I'm looking for it to be a pretty small, lighter case
For reference this is a 1cm bezel, not sure what the JD40 is but I think it's a bit larger.
Post by: Joey Quinn on Wed, 25 February 2015, 23:13:46
(Attachment Link)That should work. I'm looking for it to be a pretty small, lighter case
For reference this is a 1cm bezel, not sure what the JD40 is but I think it's a bit larger.
The only thing that restricts the bezel size is the size of the bezel on the pcb, if you make the plate too small the standoffs will hit the pcb.
Post by: hwood34 on Wed, 25 February 2015, 23:15:31
So then what would be the smallest bezel that would work with a standard 60% PCB i.e. Poker II(Attachment Link)That should work. I'm looking for it to be a pretty small, lighter case
For reference this is a 1cm bezel, not sure what the JD40 is but I think it's a bit larger.
The only thing that restricts the bezel size is the size of the bezel on the pcb, if you make the plate too small the standoffs will hit the pcb.
Post by: Joey Quinn on Wed, 25 February 2015, 23:32:16
So then what would be the smallest bezel that would work with a standard 60% PCB i.e. Poker II(Attachment Link)That should work. I'm looking for it to be a pretty small, lighter case
For reference this is a 1cm bezel, not sure what the JD40 is but I think it's a bit larger.
The only thing that restricts the bezel size is the size of the bezel on the pcb, if you make the plate too small the standoffs will hit the pcb.
No clue, I actually just sold mine, this could be answered very easily if someone is willing to make a measurement for me. I need the distance from the center of the mx switch to the edge of the pcb. I need x, someone my know it. If no one knows or measures it I'll just use the dimensions of the GH60 because I already have those files.
[attachimg=1]
Post by: hwood34 on Thu, 26 February 2015, 08:05:27
Post by: Joey Quinn on Thu, 26 February 2015, 11:30:26
So the GH60 measurements should be fine
Sounds good.
Post by: Ngt on Thu, 26 February 2015, 16:04:17
the JD style :thumb:
Any idea what size you want the bezel to be?
I didn't get what the bezel is. Is it the thickness of the plate?
Post by: Ngt on Thu, 26 February 2015, 16:07:03
Post by: hwood34 on Thu, 26 February 2015, 16:34:42
I submitted. I'm definitely interested in this. I'm curious to know what companies you need to contact for that to be real. I mean which manufacturers, providers and so on.I'll be using Big Blue Saw for waterjetting
The width of the plate that extends past the PCB on the sides and topthe JD style :thumb:
Any idea what size you want the bezel to be?
I didn't get what the bezel is. Is it the thickness of the plate?
Post by: Ngt on Thu, 26 February 2015, 17:06:24
I submitted. I'm definitely interested in this. I'm curious to know what companies you need to contact for that to be real. I mean which manufacturers, providers and so on.I'll be using Big Blue Saw for waterjettingThe width of the plate that extends past the PCB on the sides and topthe JD style :thumb:
Any idea what size you want the bezel to be?
I didn't get what the bezel is. Is it the thickness of the plate?
Ok thanks. Do they provide the CF too?
Thanks. I think it could be added to the GH glossary :D.
Post by: hwood34 on Thu, 26 February 2015, 17:25:06
I'm not actually sure. It seems like they do thoughI submitted. I'm definitely interested in this. I'm curious to know what companies you need to contact for that to be real. I mean which manufacturers, providers and so on.I'll be using Big Blue Saw for waterjettingThe width of the plate that extends past the PCB on the sides and topthe JD style :thumb:
Any idea what size you want the bezel to be?
I didn't get what the bezel is. Is it the thickness of the plate?
Ok thanks. Do they provide the CF too?
Thanks. I think it could be added to the GH glossary :D.
Post by: Ngt on Thu, 26 February 2015, 17:27:58
I'm not actually sure. It seems like they do thoughI submitted. I'm definitely interested in this. I'm curious to know what companies you need to contact for that to be real. I mean which manufacturers, providers and so on.I'll be using Big Blue Saw for waterjettingThe width of the plate that extends past the PCB on the sides and topthe JD style :thumb:
Any idea what size you want the bezel to be?
I didn't get what the bezel is. Is it the thickness of the plate?
Ok thanks. Do they provide the CF too?
Thanks. I think it could be added to the GH glossary :D .
Fair enough. How many entries do you have so far in IC?
Post by: hwood34 on Thu, 26 February 2015, 19:12:17
about 45. But that might go up once I get a more definite price and stance on this whole thing. And IC numbers are usually a good deal lower than actual GB ordersI'm not actually sure. It seems like they do thoughI submitted. I'm definitely interested in this. I'm curious to know what companies you need to contact for that to be real. I mean which manufacturers, providers and so on.I'll be using Big Blue Saw for waterjettingThe width of the plate that extends past the PCB on the sides and topthe JD style :thumb:
Any idea what size you want the bezel to be?
I didn't get what the bezel is. Is it the thickness of the plate?
Ok thanks. Do they provide the CF too?
Thanks. I think it could be added to the GH glossary :D .
Fair enough. How many entries do you have so far in IC?
Post by: cmadrid on Fri, 27 February 2015, 01:07:57
Post by: Ngt on Fri, 27 February 2015, 08:06:10
about 45. But that might go up once I get a more definite price and stance on this whole thing. And IC numbers are usually a good deal lower than actual GB ordersI'm not actually sure. It seems like they do thoughI submitted. I'm definitely interested in this. I'm curious to know what companies you need to contact for that to be real. I mean which manufacturers, providers and so on.I'll be using Big Blue Saw for waterjettingThe width of the plate that extends past the PCB on the sides and topthe JD style :thumb:
Any idea what size you want the bezel to be?
I didn't get what the bezel is. Is it the thickness of the plate?
Ok thanks. Do they provide the CF too?
Thanks. I think it could be added to the GH glossary :D .
Fair enough. How many entries do you have so far in IC?
I guess you needed the IC numbers to contact the manufacturers and tell them at least how many you'll be interested for. Am I right? If yes, when do you plan on contacting them for that more precise price information?
Post by: hwood34 on Fri, 27 February 2015, 08:07:58
Well, once I get the CAD files for the case, they have an auto price estimator on their website. If I get a little more interest, I'll start up the buy. But that all depends on what the actual price ends up being.about 45. But that might go up once I get a more definite price and stance on this whole thing. And IC numbers are usually a good deal lower than actual GB ordersI'm not actually sure. It seems like they do thoughI submitted. I'm definitely interested in this. I'm curious to know what companies you need to contact for that to be real. I mean which manufacturers, providers and so on.I'll be using Big Blue Saw for waterjettingThe width of the plate that extends past the PCB on the sides and topthe JD style :thumb:
Any idea what size you want the bezel to be?
I didn't get what the bezel is. Is it the thickness of the plate?
Ok thanks. Do they provide the CF too?
Thanks. I think it could be added to the GH glossary :D .
Fair enough. How many entries do you have so far in IC?
I guess you needed the IC numbers to contact the manufacturers and tell them at least how many you'll be interested for. Am I right? If yes, when do you plan on contacting them for that more precise price information?
Post by: hwood34 on Fri, 27 February 2015, 08:08:54
Never any TKL cases >_<Depending on when this finishes up, whether it works or not, I'll look into doing a TKL case
Post by: Ngt on Fri, 27 February 2015, 08:10:41
Well, once I get the CAD files for the case, they have an auto price estimator on their website. If I get a little more interest, I'll start up the buy. But that all depends on what the actual price ends up being.about 45. But that might go up once I get a more definite price and stance on this whole thing. And IC numbers are usually a good deal lower than actual GB ordersI'm not actually sure. It seems like they do thoughI submitted. I'm definitely interested in this. I'm curious to know what companies you need to contact for that to be real. I mean which manufacturers, providers and so on.I'll be using Big Blue Saw for waterjettingThe width of the plate that extends past the PCB on the sides and topthe JD style :thumb:
Any idea what size you want the bezel to be?
I didn't get what the bezel is. Is it the thickness of the plate?
Ok thanks. Do they provide the CF too?
Thanks. I think it could be added to the GH glossary :D .
Fair enough. How many entries do you have so far in IC?
I guess you needed the IC numbers to contact the manufacturers and tell them at least how many you'll be interested for. Am I right? If yes, when do you plan on contacting them for that more precise price information?
Fair enough. Have you tried to see how much it would be with just a standard 60% CAD file even though it might not be the final CAD file?
Post by: hwood34 on Fri, 27 February 2015, 08:12:42
Well, since all the files I found lacked plates, I just got an estimate for one of those and added a decent amount to it since all the small adjustments involved in making plates can add up quicklyWell, once I get the CAD files for the case, they have an auto price estimator on their website. If I get a little more interest, I'll start up the buy. But that all depends on what the actual price ends up being.about 45. But that might go up once I get a more definite price and stance on this whole thing. And IC numbers are usually a good deal lower than actual GB ordersI'm not actually sure. It seems like they do thoughI submitted. I'm definitely interested in this. I'm curious to know what companies you need to contact for that to be real. I mean which manufacturers, providers and so on.I'll be using Big Blue Saw for waterjettingThe width of the plate that extends past the PCB on the sides and topthe JD style :thumb:
Any idea what size you want the bezel to be?
I didn't get what the bezel is. Is it the thickness of the plate?
Ok thanks. Do they provide the CF too?
Thanks. I think it could be added to the GH glossary :D .
Fair enough. How many entries do you have so far in IC?
I guess you needed the IC numbers to contact the manufacturers and tell them at least how many you'll be interested for. Am I right? If yes, when do you plan on contacting them for that more precise price information?
Fair enough. Have you tried to see how much it would be with just a standard 60% CAD file even though it might not be the final CAD file?
Post by: Ngt on Fri, 27 February 2015, 08:15:29
Well, since all the files I found lacked plates, I just got an estimate for one of those and added a decent amount to it since all the small adjustments involved in making plates can add up quicklyWell, once I get the CAD files for the case, they have an auto price estimator on their website. If I get a little more interest, I'll start up the buy. But that all depends on what the actual price ends up being.about 45. But that might go up once I get a more definite price and stance on this whole thing. And IC numbers are usually a good deal lower than actual GB ordersI'm not actually sure. It seems like they do thoughI submitted. I'm definitely interested in this. I'm curious to know what companies you need to contact for that to be real. I mean which manufacturers, providers and so on.I'll be using Big Blue Saw for waterjettingThe width of the plate that extends past the PCB on the sides and topthe JD style :thumb:
Any idea what size you want the bezel to be?
I didn't get what the bezel is. Is it the thickness of the plate?
Ok thanks. Do they provide the CF too?
Thanks. I think it could be added to the GH glossary :D .
Fair enough. How many entries do you have so far in IC?
I guess you needed the IC numbers to contact the manufacturers and tell them at least how many you'll be interested for. Am I right? If yes, when do you plan on contacting them for that more precise price information?
Fair enough. Have you tried to see how much it would be with just a standard 60% CAD file even though it might not be the final CAD file?
I think I might not be sure that I understood what a CAD file is. Isn't the file that describe the structure of the plate?
Oh that's where the $50-80 price range comes from?
Post by: hwood34 on Fri, 27 February 2015, 13:09:13
Post by: Ngt on Sat, 28 February 2015, 05:15:34
Yep
So if the CAD is the file that describes the plate, how could you find such files lacking the plate?
Post by: heedpantsnow on Sat, 28 February 2015, 07:16:02
Post by: Ngt on Sat, 28 February 2015, 07:35:26
Could you post a list of those interested? I can't remember if I already signed up.
He could just tell you if you are in the list rather than naming everybody. :)
Post by: heedpantsnow on Sat, 28 February 2015, 07:37:16
Could you post a list of those interested? I can't remember if I already signed up.
He could just tell you if you are in the list rather than naming everybody. :)
Or that
Post by: hwood34 on Sat, 28 February 2015, 07:53:14
I actually forgot to include a username field in the formCould you post a list of those interested? I can't remember if I already signed up.
He could just tell you if you are in the list rather than naming everybody. :)
Or that
Post by: ideus on Sat, 28 February 2015, 12:04:38
Post by: hwood34 on Sat, 28 February 2015, 12:11:07
Just filled the form. Will the plate fit both, the Poker X and the Infinity keyboard? I require both.Poker, yes. Infinity, doubt it, has the different layout problem
Post by: ideus on Sat, 28 February 2015, 12:14:20
Just filled the form. Will the plate fit both, the Poker X and the Infinity keyboard? I require both.Poker, yes. Infinity, doubt it, has the different layout problem
There are some ways to make cuts for splitted and single switch backspace and right shifts, I think.
Post by: hwood34 on Sat, 28 February 2015, 12:29:56
hmm, I might look into that then.Just filled the form. Will the plate fit both, the Poker X and the Infinity keyboard? I require both.Poker, yes. Infinity, doubt it, has the different layout problem
There are some ways to make cuts for splitted and single switch backspace and right shifts, I think.
Post by: Joey Quinn on Sat, 28 February 2015, 12:39:48
hmm, I might look into that then.Just filled the form. Will the plate fit both, the Poker X and the Infinity keyboard? I require both.Poker, yes. Infinity, doubt it, has the different layout problem
There are some ways to make cuts for splitted and single switch backspace and right shifts, I think.
I have a feeling that JD can help with this.
Post by: suicidal_orange on Sat, 28 February 2015, 13:07:34
Post by: ideus on Sat, 28 February 2015, 13:46:59
Post by: Joey Quinn on Sat, 28 February 2015, 13:49:31
The picture below shows what appears to be universal cut outs - GH60, Poker, Infinity, ANSI, ISO -
Is it possible for a cutout to be pcb cherry and costar compatible, I don't use costar but I know some people do.
Post by: ideus on Sat, 28 February 2015, 14:00:09
The picture below shows what appears to be universal cut outs - GH60, Poker, Infinity, ANSI, ISO -
Is it possible for a cutout to be pcb cherry and costar compatible, I don't use costar but I know some people do.
This plate does not support plate mounted stabs.
Post by: Ngt on Sun, 01 March 2015, 17:07:01
The picture below shows what appears to be universal cut outs - GH60, Poker, Infinity, ANSI, ISO -
Is it possible for a cutout to be pcb cherry and costar compatible, I don't use costar but I know some people do.
This plate does not support plate mounted stabs.
Do you know if it will be the case for this CF60 case?
Post by: Asininity on Sun, 01 March 2015, 21:40:52
Post by: hwood34 on Sun, 01 March 2015, 22:07:57
this will use PCB mount stabsThe picture below shows what appears to be universal cut outs - GH60, Poker, Infinity, ANSI, ISO -
Is it possible for a cutout to be pcb cherry and costar compatible, I don't use costar but I know some people do.
This plate does not support plate mounted stabs.
Do you know if it will be the case for this CF60 case?
Post by: Ngt on Mon, 02 March 2015, 02:25:47
this will use PCB mount stabsThe picture below shows what appears to be universal cut outs - GH60, Poker, Infinity, ANSI, ISO -
Is it possible for a cutout to be pcb cherry and costar compatible, I don't use costar but I know some people do.
This plate does not support plate mounted stabs.
Do you know if it will be the case for this CF60 case?
Ok thanks for the answer. I'm new to DIY stuff. I apologize if I ask stupid questions. For the PCB mount stabs to be used with the top CF plate, does the plates holes just need to be wide enough for the stabs to come through?
Post by: ideus on Mon, 02 March 2015, 04:29:44
this will use PCB mount stabsThe picture below shows what appears to be universal cut outs - GH60, Poker, Infinity, ANSI, ISO -
Is it possible for a cutout to be pcb cherry and costar compatible, I don't use costar but I know some people do.
This plate does not support plate mounted stabs.
Do you know if it will be the case for this CF60 case?
Ok thanks for the answer. I'm new to DIY stuff. I apologize if I ask stupid questions. For the PCB mount stabs to be used with the top CF plate, does the plates holes just need to be wide enough for the stabs to come through?
Yes, the plate should have cut off to allow the PCB stabilizers to come through, like sprits acrylic plates.
Post by: Ngt on Mon, 02 March 2015, 06:08:54
this will use PCB mount stabsThe picture below shows what appears to be universal cut outs - GH60, Poker, Infinity, ANSI, ISO -
Is it possible for a cutout to be pcb cherry and costar compatible, I don't use costar but I know some people do.
This plate does not support plate mounted stabs.
Do you know if it will be the case for this CF60 case?
Ok thanks for the answer. I'm new to DIY stuff. I apologize if I ask stupid questions. For the PCB mount stabs to be used with the top CF plate, does the plates holes just need to be wide enough for the stabs to come through?
Yes, the plate should have cut off to allow the PCB stabilizers to come through, like sprits acrylic plates.
Ok thanks.
Post by: Natemiester on Fri, 06 March 2015, 19:31:32
Post by: ideus on Fri, 06 March 2015, 20:44:39
Could one of you fine people explain to me the difference between the notched and unnotched cases? The form says that an unnotched plate forces you to desolder the switch to get the top off. Why is that?
The notches allow the top of the switches to be removed through the plate, with no need for desoldering and unlocking the full switch. It serves for the purpose of changing the springs or lubing the stems.
Post by: Natemiester on Fri, 06 March 2015, 21:44:14
Post by: nandop on Sat, 14 March 2015, 23:48:13
Post by: Joey Quinn on Thu, 02 April 2015, 13:47:20
Here's the plates, it'll support every GH60 layout possible.
(http://i.imgur.com/QcUo7BP.jpg)
Here's the first render with brass standoffs. I'll make others with different standoffs and adjust the light so the carbon looks better. The carbon model in inventor is really bright for some reason.
(http://i.imgur.com/ZIfu3hZ.jpg)
Post by: hwood34 on Thu, 02 April 2015, 23:47:13
Post by: heedpantsnow on Thu, 02 April 2015, 23:50:50
Thanks for all the help Joey Quinn! For some reason Big Blue Saw is acting funny and won't let me get an automated estimate for carbon fiber, so I've sent a request for one. But to give everyone an idea of price, polycarb was around $45 for 10-100 orders and aluminum was low $50s
I priced some 1.5mm cf plates from them; they were $56/each for 10+ I believe. Yeah their automated tool doesn't list cf.
Post by: hwood34 on Fri, 03 April 2015, 00:21:10
ah, well that's not bad at allThanks for all the help Joey Quinn! For some reason Big Blue Saw is acting funny and won't let me get an automated estimate for carbon fiber, so I've sent a request for one. But to give everyone an idea of price, polycarb was around $45 for 10-100 orders and aluminum was low $50s
I priced some 1.5mm cf plates from them; they were $56/each for 10+ I believe. Yeah their automated tool doesn't list cf.
Post by: heedpantsnow on Fri, 03 April 2015, 00:27:23
ah, well that's not bad at allThanks for all the help Joey Quinn! For some reason Big Blue Saw is acting funny and won't let me get an automated estimate for carbon fiber, so I've sent a request for one. But to give everyone an idea of price, polycarb was around $45 for 10-100 orders and aluminum was low $50s
I priced some 1.5mm cf plates from them; they were $56/each for 10+ I believe. Yeah their automated tool doesn't list cf.
Yeah you should be good. Good luck with the project bro!
Post by: DrHubblePhD on Sat, 04 April 2015, 22:18:02
Post by: hwood34 on Tue, 07 April 2015, 06:47:27
Post by: hwood34 on Tue, 07 April 2015, 09:35:09
Post by: GenKaan on Tue, 07 April 2015, 09:39:07
Please come back when you have a custom transparent case that would take the Ducky Shin 3 TKL PCB
Post by: DrHubblePhD on Tue, 07 April 2015, 09:49:56
Love it but no 60% board atm
Please come back when you have a custom transparent case that would take the Ducky Shin 3 TKL PCB
Wat
Post by: hwood34 on Tue, 07 April 2015, 10:23:58
Post by: Joey Quinn on Tue, 07 April 2015, 11:46:20
As far as notches are concerned I don't really care. I've never felt the need to swap stems. Do you want me to make a case with different notch styles or the notches removed?
Post by: exitfire401 on Tue, 07 April 2015, 11:50:42
Post by: ccarlitos2 on Tue, 07 April 2015, 11:55:18
Post by: Joey Quinn on Tue, 07 April 2015, 13:29:41
Corrected carbon texture and SS standoffs.
I may post more if anything looks cool while I'm messing around.
Post by: Joey Quinn on Tue, 07 April 2015, 13:49:53
Anyone have a purple standoff hookup? When this case happens I'm gonna need some.
Post by: hwood34 on Tue, 07 April 2015, 17:05:11
Post by: Joey Quinn on Tue, 07 April 2015, 17:14:01
Since the price tiers have pretty little variance, I'll be starting this soon. One idea, since I doubt we'll get enough orders to get great discounts on standoffs, I might include an option for varying colors. I'll have to research the options first
McMaster Carr can get us bulk of everything fairly cheaply.
Post by: derezzed on Tue, 07 April 2015, 22:36:04
Show Image(http://puu.sh/h1UAi/edcb8f3a66.jpg)
DrHubblePhD
Dolch on this case would bring a man to tears. I've seen so many remarkable custom designs since I've joined GeekHack, it seems like GeekHack is ushering in the dawn of a keyboard renaissance.
Post by: Ngt on Wed, 08 April 2015, 14:03:03
Post by: hwood34 on Wed, 08 April 2015, 15:32:54
Indeed it seems a little more expensive that the prediction. The break after 10 ordered is not that high as I thought it could be. HHKB or this case, damn too many decisions to make when you are on Geekhack. :DI mean, how much nicer does carbon fiber look than some plain old plastic ;) (plus MX :thumb:)
Post by: Ngt on Wed, 08 April 2015, 15:44:58
Indeed it seems a little more expensive that the prediction. The break after 10 ordered is not that high as I thought it could be. HHKB or this case, damn too many decisions to make when you are on Geekhack. :DI mean, how much nicer does carbon fiber look than some plain old plastic ;) (plus MX :thumb: )
Geekhack aka "How to spend your lifetime money". It is not the soul that it sucks out but your wallet and bank account. haha
Post by: hwood34 on Wed, 08 April 2015, 23:20:47
Post by: exitfire401 on Wed, 08 April 2015, 23:38:18
Depending on the interest, I may also be offering a mid piece as an add on that would fit right on the standoffs for an easy switch to a sandwhich design
I'm already probably in for 1 case, so I wouldn't mind plunking down a little more for that too
Post by: Den441 on Thu, 09 April 2015, 00:42:38
Post by: hwood34 on Thu, 09 April 2015, 06:15:08
Nice, I have been waiting for something like this for awhile. I just love it when new materials start emerging in my hobbies. I saw the same thing happen in the ecig market with carbon fiber mods. One really cool thing I saw come out of that was an ecig made from a red and black carbon fiber. I think it may have been some kind of Carbon fiber/Kevlar hybrid material. That same material could probably be used to make cases as well. Then you could have colors like red/black, blue, yellow/black, etc. Just an idea for the future.Yeah, I've seen that stuff and it does look really cool. Unfortunately, all big blue saw offers is regular carbon fiber. A red acrylic mid piece may look interesting though
Post by: heedpantsnow on Thu, 09 April 2015, 10:20:39
Post by: hwood34 on Thu, 09 April 2015, 11:24:35
How many have signed up so far?around 50 have expressed interest. Since the price difference is really negigable past 10 orders, I'm not really worried about numbers
Post by: vindaon on Thu, 09 April 2015, 12:54:43
Post by: Ngt on Thu, 09 April 2015, 14:55:24
Depending on the interest, I may also be offering a mid piece as an add on that would fit right on the standoffs for an easy switch to a sandwhich designYou catched my attention here.
Pretty much like a Nerd NS 60 housing, differences being that it is not made of aluminum?
Post by: hwood34 on Thu, 09 April 2015, 14:56:11
YessirDepending on the interest, I may also be offering a mid piece as an add on that would fit right on the standoffs for an easy switch to a sandwhich designYou catched my attention here.
Pretty much like a Nerd NS 60 housing, differences being that it is not made of aluminum?
Post by: Ngt on Thu, 09 April 2015, 18:52:48
YessirDepending on the interest, I may also be offering a mid piece as an add on that would fit right on the standoffs for an easy switch to a sandwhich designYou catched my attention here.
Pretty much like a Nerd NS 60 housing, differences being that it is not made of aluminum?
OUUUUUUHHHH. Hesitation is growing now haha! Would you have a price tag in mind for such a beauty?
Post by: Melanic on Thu, 09 April 2015, 19:47:30
Post by: Hellcatz on Thu, 09 April 2015, 19:49:18
Post by: Joey Quinn on Thu, 09 April 2015, 19:51:25
Awww ya damn will be so down but don't you need gons permission?
For a 60% with a mid layer? No, we aren't copying his design.
Post by: hwood34 on Thu, 09 April 2015, 23:49:12
Post by: ghostjuggernaut on Fri, 10 April 2015, 00:39:56
Post by: hwood34 on Fri, 10 April 2015, 00:44:45
Since this is still in the interest check stage, what are the chances of offering a happy layout? Assuming you would have >10 people interested that is. It wouldn't be a deal breaker for me, but wanted to ask.Judging from price tiers right now, as long as those people would be willing to pay a few dollars more I'm sure I could provide a happy layout plate as another add on
Post by: ghostjuggernaut on Fri, 10 April 2015, 00:47:01
Since this is still in the interest check stage, what are the chances of offering a happy layout? Assuming you would have >10 people interested that is. It wouldn't be a deal breaker for me, but wanted to ask.Judging from price tiers right now, as long as those people would be willing to pay a few dollars more I'm sure I could provide a happy layout plate as another add on
If it ends up being offered, I would be interested. Regardless though, I plan to purchase a case. :thumb:
Post by: hwood34 on Fri, 10 April 2015, 13:46:31
Post by: exitfire401 on Fri, 10 April 2015, 13:50:42
Great news! Turns out the prices are cheaper than originally quoted and are actually in the $60s
Even better!
Post by: Hellcatz on Fri, 10 April 2015, 13:56:14
Post by: Joey Quinn on Fri, 10 April 2015, 14:13:19
Great news! Turns out the prices are cheaper than originally quoted and are actually in the $60s
I may actually be able to afford one now. :)
Post by: hwood34 on Fri, 10 April 2015, 14:25:49
Would look great if you could do a dark gold stand offs. Maybe even a dark bronze. Is the cf coated or uncoated?I'm looking at different colors for standoffs right now. Deciding on coating
Post by: Ngt on Fri, 10 April 2015, 15:16:05
Is it possible to give different colors to CF like for ALU? If yes, would you intend on offering different color for case or Greg/metal will be the only one?Would look great if you could do a dark gold stand offs. Maybe even a dark bronze. Is the cf coated or uncoated?I'm looking at different colors for standoffs right now. Deciding on coating
Good news on the price indeed. Did you get a quote for the price of the middle layer?
Post by: hwood34 on Fri, 10 April 2015, 15:18:47
I'm just doing one color. And yup, in the OP: $20Is it possible to give different colors to CF like for ALU? If yes, would you intend on offering different color for case or Greg/metal will be the only one?Would look great if you could do a dark gold stand offs. Maybe even a dark bronze. Is the cf coated or uncoated?I'm looking at different colors for standoffs right now. Deciding on coating
Good news on the price indeed. Did you get a quote for the price of the middle layer?
Post by: Ngt on Fri, 10 April 2015, 15:21:03
Alright. My bad I didn't check the OP. Thanks for the answer.I'm just doing one color. And yup, in the OP: $20Is it possible to give different colors to CF like for ALU? If yes, would you intend on offering different color for case or Greg/metal will be the only one?Would look great if you could do a dark gold stand offs. Maybe even a dark bronze. Is the cf coated or uncoated?I'm looking at different colors for standoffs right now. Deciding on coating
Good news on the price indeed. Did you get a quote for the price of the middle layer?
Post by: Ngt on Fri, 10 April 2015, 15:22:40
Post by: hwood34 on Fri, 10 April 2015, 15:23:43
As the middle piece will be black, would it still be interesting to have side led on the PCB?Well, it might be a tiny bit dimmer, but they would still work I'm sure.
Post by: DrHubblePhD on Fri, 10 April 2015, 15:23:43
As the middle piece will be black, would it still be interesting to have side led on the PCB?
there are a multitude of pcbs that offer Leds on the bottom or sides, those should be compatible with this board.
Post by: Ngt on Fri, 10 April 2015, 15:26:50
Post by: Melanic on Fri, 10 April 2015, 16:34:17
Post by: DrHubblePhD on Fri, 10 April 2015, 17:19:16
Question about the mid layer. How thick will it be? From the concept picture it seems like it would have to be pretty thin to go around the standoffs and not extend past the plates, unless it was integrated with the standoffs.
The standoffs sit inside the mid layer.
Post by: Joey Quinn on Sat, 11 April 2015, 12:24:31
Question about the mid layer. How thick will it be? From the concept picture it seems like it would have to be pretty thin to go around the standoffs and not extend past the plates, unless it was integrated with the standoffs.If people want a mid layer the standoffs will need to be moved. The original plan was no layer so I made them flush with the border because it looks better.
Post by: exitfire401 on Sat, 11 April 2015, 12:27:05
Question about the mid layer. How thick will it be? From the concept picture it seems like it would have to be pretty thin to go around the standoffs and not extend past the plates, unless it was integrated with the standoffs.If people want a mid layer the standoffs will need to be moved. The original plan was no layer so I made them flush with the border because it looks better.
I'm good either way. Don't need the middle layer to have my purchase (buying either way) but it would be a welcome addition.
Post by: hwood34 on Sat, 11 April 2015, 12:36:54
I'm working on a design that would allow for the mid piece to fit "with" the standoffsQuestion about the mid layer. How thick will it be? From the concept picture it seems like it would have to be pretty thin to go around the standoffs and not extend past the plates, unless it was integrated with the standoffs.If people want a mid layer the standoffs will need to be moved. The original plan was no layer so I made them flush with the border because it looks better.
I'm good either way. Don't need the middle layer to have my purchase (buying either way) but it would be a welcome addition.
Post by: Ngt on Sat, 11 April 2015, 12:45:24
Cool looking forward to see how it looks.I'm working on a design that would allow for the mid piece to fit "with" the standoffsQuestion about the mid layer. How thick will it be? From the concept picture it seems like it would have to be pretty thin to go around the standoffs and not extend past the plates, unless it was integrated with the standoffs.If people want a mid layer the standoffs will need to be moved. The original plan was no layer so I made them flush with the border because it looks better.
I'm good either way. Don't need the middle layer to have my purchase (buying either way) but it would be a welcome addition.
Post by: Joey Quinn on Sat, 11 April 2015, 15:00:36
[attachimg=2]
[attachimg=3]
These are just a few colors I chose to render in 1080 because I don't have much time today. I won't be able to render any more until tomorrow but if anyone wants any colors just request it. Tomorrows renders will be 4k like my earlier ones.
Post by: ccarlitos2 on Sat, 11 April 2015, 15:12:46
Post by: FreeCopy on Sat, 11 April 2015, 15:52:06
Post by: exitfire401 on Sat, 11 April 2015, 15:56:40
(Attachment Link)
Take my money
(This was for the green)
Post by: Joey Quinn on Sat, 11 April 2015, 16:03:20
Can we get a dark purple render? :D
For sure, I'll do it tomorrow.
Post by: Ngt on Sat, 11 April 2015, 16:11:25
(Attachment Link)
(Attachment Link)
(Attachment Link)
These are just a few colors I chose to render in 1080 because I don't have much time today. I won't be able to render any more until tomorrow but if anyone wants any colors just request it. Tomorrows renders will be 4k like my earlier ones.
Cool, good job Joey, thanks. I thought at the beginning that there would be only one color which was black. I guess I just misinterpreting.
Post by: hwood34 on Sat, 11 April 2015, 16:13:23
(Attachment Link)Looking good :thumb:. We're getting closer and closer to getting this buy going. Prepare your wallets everyone!
(Attachment Link)
(Attachment Link)
These are just a few colors I chose to render in 1080 because I don't have much time today. I won't be able to render any more until tomorrow but if anyone wants any colors just request it. Tomorrows renders will be 4k like my earlier ones.
Post by: FreeCopy on Sat, 11 April 2015, 16:16:10
(Attachment Link)Looking good :thumb:. We're getting closer and closer to getting this buy going. Prepare your wallets everyone!
(Attachment Link)
(Attachment Link)
These are just a few colors I chose to render in 1080 because I don't have much time today. I won't be able to render any more until tomorrow but if anyone wants any colors just request it. Tomorrows renders will be 4k like my earlier ones.
Ready for this case? Absolutely! Ready for everything else to turn this case into one of the pieces of a completed board? Possible.
Post by: hwood34 on Sat, 11 April 2015, 16:36:25
Well we can't just have this case lying around unused, can we?(Attachment Link)Looking good :thumb:. We're getting closer and closer to getting this buy going. Prepare your wallets everyone!
(Attachment Link)
(Attachment Link)
These are just a few colors I chose to render in 1080 because I don't have much time today. I won't be able to render any more until tomorrow but if anyone wants any colors just request it. Tomorrows renders will be 4k like my earlier ones.
Ready for this case? Absolutely! Ready for everything else to turn this case into one of the pieces of a completed board? Possible.
Post by: hwood34 on Sat, 11 April 2015, 20:49:38
Post by: Melanic on Sat, 11 April 2015, 21:50:31
Post by: hwood34 on Sat, 11 April 2015, 22:05:43
Just to toss an idea in. Would it be possible to have a carbon fiber mid layer? It would basically just be a rectangular band that goes around the outer perimeter of the stand offs. Would mean the stand offs need to be off set by the thickness of the CF layer, or the plates be made a bit bigger. Just think it would look nice as all carbon fiber. Not sure how much it costs to manufacture a piece like that though.I'll look into a full CF case. Considering CF didn't turn out to be much more than acrylic, it might not be that pricey
Post by: hwood34 on Sun, 12 April 2015, 14:05:37
Post by: azhdar on Sun, 12 April 2015, 14:30:33
(Attachment Link)green oO
(Attachment Link)
(Attachment Link)
These are just a few colors I chose to render in 1080 because I don't have much time today. I won't be able to render any more until tomorrow but if anyone wants any colors just request it. Tomorrows renders will be 4k like my earlier ones.
I'm sold, invoice me already pls.
Post by: Ngt on Sun, 12 April 2015, 14:56:34
Also is anyone here interested in an all-acrylic vergo? Like one of these (http://kbdlab.co.kr/index.php?document_srl=1156358&mid=board_Lsno50) just slightly edited
It looks really nice indeed. Are you considering a clear/milk middle layer as well?
Post by: heedpantsnow on Sun, 12 April 2015, 15:55:22
So actually looking at renders for the acrylic is doesn't look like we'd really need to change it from how it is now. As for coating, does anyone here know if putting switches in and out would cause any sort of substantial dust to get pulled up from the CF and be dangerous?
Should not be necessary. 1.5 mil CF is plenty strong and at that thickness pretty chip-resistant.
It can be conductive so there should be some foam or shelf liner under the PCB.
Post by: heedpantsnow on Sun, 12 April 2015, 16:01:33
Just to toss an idea in. Would it be possible to have a carbon fiber mid layer? It would basically just be a rectangular band that goes around the outer perimeter of the stand offs. Would mean the stand offs need to be off set by the thickness of the CF layer, or the plates be made a bit bigger. Just think it would look nice as all carbon fiber. Not sure how much it costs to manufacture a piece like that though.I'll look into a full CF case. Considering CF didn't turn out to be much more than acrylic, it might not be that pricey
Solid CF of that thickness is actually quite expensive. I'd you're used to acrylic, etc where the price difference is negligible between 1.5mil, 5 mil, 10 mil (maybe double 1.5 mil), it doesn't price the same. 5mil can be 10x 1.5 mil.
Honestly, if you want "ultra-light" then the acrylic mid layer kindof kills that. So in that case you would want to use standoffs (good) or pieces of CF tubing and threaded rod (better, but only a little).
I love CF as a material and it's fine to use the acrylic if you want it. Just saying it takes away from the ultra-light aspect quite a bit. Just want people to have proper expectations.
Post by: hwood34 on Sun, 12 April 2015, 16:03:43
I'm deciding on colors right now, but since this is just gonna be a quick mini-run it won't be anything super fancyAlso is anyone here interested in an all-acrylic vergo? Like one of these (http://kbdlab.co.kr/index.php?document_srl=1156358&mid=board_Lsno50) just slightly edited
It looks really nice indeed. Are you considering a clear/milk middle layer as well?
Alright, so maybe just a layer of like black shelf liner attached to the top of the bottom piece?So actually looking at renders for the acrylic is doesn't look like we'd really need to change it from how it is now. As for coating, does anyone here know if putting switches in and out would cause any sort of substantial dust to get pulled up from the CF and be dangerous?
Should not be necessary. 1.5 mil CF is plenty strong and at that thickness pretty chip-resistant.
It can be conductive so there should be some foam or shelf liner under the PCB.
Post by: heedpantsnow on Sun, 12 April 2015, 16:09:21
Post by: hwood34 on Sun, 12 April 2015, 16:10:18
That's the main reason I'm doing a mid layer as an add on. If people want it additionally, fine, but not at the cost of the original buy's aim.Just to toss an idea in. Would it be possible to have a carbon fiber mid layer? It would basically just be a rectangular band that goes around the outer perimeter of the stand offs. Would mean the stand offs need to be off set by the thickness of the CF layer, or the plates be made a bit bigger. Just think it would look nice as all carbon fiber. Not sure how much it costs to manufacture a piece like that though.I'll look into a full CF case. Considering CF didn't turn out to be much more than acrylic, it might not be that pricey
Solid CF of that thickness is actually quite expensive. I'd you're used to acrylic, etc where the price difference is negligible between 1.5mil, 5 mil, 10 mil (maybe double 1.5 mil), it doesn't price the same. 5mil can be 10x 1.5 mil.
Honestly, if you want "ultra-light" then the acrylic mid layer kindof kills that. So in that case you would want to use standoffs (good) or pieces of CF tubing and threaded rod (better, but only a little).
I love CF as a material and it's fine to use the acrylic if you want it. Just saying it takes away from the ultra-light aspect quite a bit. Just want people to have proper expectations.
Post by: hwood34 on Sun, 12 April 2015, 17:50:11
Post by: ImDaBaron on Sun, 12 April 2015, 18:08:11
Post by: Joey Quinn on Sun, 12 April 2015, 19:52:13
so if anyone wants to draw me up a happy layout 1.5mm plate I'll get a quote on it and we can get this rolling
I'll do it later tonight.
Post by: ccarlitos2 on Sun, 12 April 2015, 22:36:50
Post by: hwood34 on Sun, 12 April 2015, 23:07:12
I'll second the interest on a happy layout :) still being new to all of this I assume by happy you mean the hhkb pro 2?yessir
Post by: ccarlitos2 on Sun, 12 April 2015, 23:10:05
Post by: hwood34 on Sun, 12 April 2015, 23:20:10
Perfect. I just bought a HHKB so this would look awesome with it :D Will definitely buy.Oh no, sorry, this would only work with MX, it's just in the HHKB layout
Post by: ccarlitos2 on Sun, 12 April 2015, 23:24:46
Post by: FrostyToast on Thu, 16 April 2015, 10:47:34
Also is anyone here interested in an all-acrylic vergo? Like one of these (http://kbdlab.co.kr/index.php?document_srl=1156358&mid=board_Lsno50) just slightly edited
Just so no one gets their balls busted when it happens, I am planning to do a full cnc Vergo buy once some things are finalized.
It will however be quite a while until anything gets started for my buy. Even GB organizers have to play the waiting game.
Post by: Joey Quinn on Thu, 16 April 2015, 12:32:04
Also is anyone here interested in an all-acrylic vergo? Like one of these (http://kbdlab.co.kr/index.php?document_srl=1156358&mid=board_Lsno50) just slightly edited
Just so no one gets their balls busted when it happens, I am planning to do a full cnc Vergo buy once some things are finalized.
It will however be quite a while until anything gets started for my buy. Even GB organizers have to play the waiting game.
Just looked this up, depending on my money situation when it happens I'll probably be in.
Post by: Melanic on Sat, 18 April 2015, 09:23:35
Post by: cmadrid on Sat, 18 April 2015, 18:12:00
Also is anyone here interested in an all-acrylic vergo? Like one of these (http://kbdlab.co.kr/index.php?document_srl=1156358&mid=board_Lsno50) just slightly edited
Just so no one gets their balls busted when it happens, I am planning to do a full cnc Vergo buy once some things are finalized.
It will however be quite a while until anything gets started for my buy. Even GB organizers have to play the waiting game.
I'd like something like this but not split in half.. which I guess is the point of the thing >_<
Post by: FrostyToast on Sat, 18 April 2015, 18:16:40
Also is anyone here interested in an all-acrylic vergo? Like one of these (http://kbdlab.co.kr/index.php?document_srl=1156358&mid=board_Lsno50) just slightly edited
Just so no one gets their balls busted when it happens, I am planning to do a full cnc Vergo buy once some things are finalized.
It will however be quite a while until anything gets started for my buy. Even GB organizers have to play the waiting game.
I'd like something like this but not split in half.. which I guess is the point of the thing >_<
Well one of the features of this is that you can put the two halves together like a normal board.
Post by: hwood34 on Sat, 18 April 2015, 18:17:26
well you can fit the two halves back together ;)Also is anyone here interested in an all-acrylic vergo? Like one of these (http://kbdlab.co.kr/index.php?document_srl=1156358&mid=board_Lsno50) just slightly edited
Just so no one gets their balls busted when it happens, I am planning to do a full cnc Vergo buy once some things are finalized.
It will however be quite a while until anything gets started for my buy. Even GB organizers have to play the waiting game.
I'd like something like this but not split in half.. which I guess is the point of the thing >_<
Post by: cmadrid on Sat, 18 April 2015, 20:20:46
well you can fit the two halves back together ;)Also is anyone here interested in an all-acrylic vergo? Like one of these (http://kbdlab.co.kr/index.php?document_srl=1156358&mid=board_Lsno50) just slightly edited
Just so no one gets their balls busted when it happens, I am planning to do a full cnc Vergo buy once some things are finalized.
It will however be quite a while until anything gets started for my buy. Even GB organizers have to play the waiting game.
I'd like something like this but not split in half.. which I guess is the point of the thing >_<
Yeah, and my 6 year old can make off with the cable or half the keyboard :o
Plus, I don't like the whole extra cable thing.. but I do like the look of the board while the two halves are pushed together!
Post by: Giorgio on Sat, 25 April 2015, 04:43:21
Post by: Joey Quinn on Sat, 25 April 2015, 13:31:13
I would also an option that allows the use of an aluminium plate. Your kit would be then made of a rectangular frame to be put on the top of the aluminium plate), mid layer, bottom layer.
What?
You are describing an entirely different case, if you want this case in Al just order it from Big Blue Saw in Al.
Post by: Giorgio on Sat, 25 April 2015, 13:37:47
Post by: Melanic on Tue, 28 April 2015, 12:46:41
Post by: Joey Quinn on Tue, 28 April 2015, 12:57:57
Just wanted to ask if there has been and progress on this project.
AFAIK it's ready to go. Hwood just needs to launch the GB page.
Post by: ccarlitos2 on Tue, 28 April 2015, 13:08:22
Just wanted to ask if there has been and progress on this project.
AFAIK it's ready to go. Hwood just needs to launch the GB page.
Can't wait!
Post by: hwood34 on Tue, 28 April 2015, 21:28:51
Well I still need to get pricing on the mid piece in carbon fiber and the happy layout plate. The big blue saw guy was usually really quick to respond but it's been like 10 days, I've emailed him twice, I'll give it another day or so before I try and speak with someone elseJust wanted to ask if there has been and progress on this project.
AFAIK it's ready to go. Hwood just needs to launch the GB page.
Post by: Ngt on Wed, 29 April 2015, 01:20:56
How long do you want the GB to last?Well I still need to get pricing on the mid piece in carbon fiber and the happy layout plate. The big blue saw guy was usually really quick to respond but it's been like 10 days, I've emailed him twice, I'll give it another day or so before I try and speak with someone elseJust wanted to ask if there has been and progress on this project.
AFAIK it's ready to go. Hwood just needs to launch the GB page.
Post by: hwood34 on Wed, 29 April 2015, 06:05:26
I'll probably leave it up for 2-3 weeksHow long do you want the GB to last?Well I still need to get pricing on the mid piece in carbon fiber and the happy layout plate. The big blue saw guy was usually really quick to respond but it's been like 10 days, I've emailed him twice, I'll give it another day or so before I try and speak with someone elseJust wanted to ask if there has been and progress on this project.
AFAIK it's ready to go. Hwood just needs to launch the GB page.
Post by: Ngt on Wed, 29 April 2015, 06:10:03
I'll probably leave it up for 2-3 weeksHow long do you want the GB to last?Well I still need to get pricing on the mid piece in carbon fiber and the happy layout plate. The big blue saw guy was usually really quick to respond but it's been like 10 days, I've emailed him twice, I'll give it another day or so before I try and speak with someone elseJust wanted to ask if there has been and progress on this project.
AFAIK it's ready to go. Hwood just needs to launch the GB page.
Alright thanks for the info.
Post by: azhdar on Wed, 29 April 2015, 07:14:05
Quote
I'm having a hard time figuring out based on this pictures but would it supports both winkey and winkeyless bottom row ?Show Image(http://i.imgur.com/QcUo7BP.jpg)
Post by: FrostyToast on Wed, 29 April 2015, 07:21:31
QuoteI'm having a hard time figuring out based on this pictures but would it supports both winkey and winkeyless bottom row ?Show Image(http://i.imgur.com/QcUo7BP.jpg)
Yes.
That is why the cutouts at the bottom are wider.
Post by: azhdar on Wed, 29 April 2015, 07:28:09
Thanks.QuoteI'm having a hard time figuring out based on this pictures but would it supports both winkey and winkeyless bottom row ?Show Image(http://i.imgur.com/QcUo7BP.jpg)
Yes.
That is why the cutouts at the bottom are wider.
Post by: hwood34 on Wed, 29 April 2015, 09:34:17
YupQuoteI'm having a hard time figuring out based on this pictures but would it supports both winkey and winkeyless bottom row ?Show Image(http://i.imgur.com/QcUo7BP.jpg)
Post by: hwood34 on Wed, 29 April 2015, 20:47:19
Standard case (including standoffs and screws): $78
Acrylic mid piece: $22
Happy plate: $65
A carbon fiber mid piece ended up being something like $125, so that's a no go unfortunately. I'm thinking to at least match the color somewhat I'll do a grey acrylic.
Gotta do work and stuff right now, I won't be able to work on a thread tonight. If anyone wants to work on a pretty one for me though ;)
Post by: exitfire401 on Wed, 29 April 2015, 20:52:32
Alright, we're all set to go with the GB. Here's the final pricing:
Standard case (including standoffs and screws): $78
Acrylic mid piece: $22
Happy plate: $65
A carbon fiber mid piece ended up being something like $125, so that's a no go unfortunately. I'm thinking to at least match the color somewhat I'll do a grey acrylic.
Gotta do work and stuff right now, I won't be able to work on a thread tonight. If anyone wants to work on a pretty one for me though ;)
Awesome! Still well within my price range.
Post by: Melanic on Thu, 30 April 2015, 12:01:37
Alright, we're all set to go with the GB. Here's the final pricing:Dang, that carbon fiber mid piece costs a lot more than I thought it would have.
Standard case (including standoffs and screws): $78
Acrylic mid piece: $22
Happy plate: $65
A carbon fiber mid piece ended up being something like $125, so that's a no go unfortunately. I'm thinking to at least match the color somewhat I'll do a grey acrylic.
Gotta do work and stuff right now, I won't be able to work on a thread tonight. If anyone wants to work on a pretty one for me though ;)
Is that HHKB plate price for just the top?
Post by: hwood34 on Thu, 30 April 2015, 12:02:35
Yep. The plate accounts for most of the cost, the bottom is really just the cost of materialAlright, we're all set to go with the GB. Here's the final pricing:Dang, that carbon fiber mid piece costs a lot more than I thought it would have.
Standard case (including standoffs and screws): $78
Acrylic mid piece: $22
Happy plate: $65
A carbon fiber mid piece ended up being something like $125, so that's a no go unfortunately. I'm thinking to at least match the color somewhat I'll do a grey acrylic.
Gotta do work and stuff right now, I won't be able to work on a thread tonight. If anyone wants to work on a pretty one for me though ;)
Is that HHKB plate price for just the top?
Post by: Joey Quinn on Fri, 01 May 2015, 00:57:45
QuoteI'm having a hard time figuring out based on this pictures but would it supports both winkey and winkeyless bottom row ?Show Image(http://i.imgur.com/QcUo7BP.jpg)
The plate supports every layout listed here. https://geekhack.org/index.php?topic=41464.msg828888#msg828888
Alright, we're all set to go with the GB. Here's the final pricing:
Standard case (including standoffs and screws): $78
Acrylic mid piece: $22
Happy plate: $65
A carbon fiber mid piece ended up being something like $125, so that's a no go unfortunately. I'm thinking to at least match the color somewhat I'll do a grey acrylic.
Gotta do work and stuff right now, I won't be able to work on a thread tonight. If anyone wants to work on a pretty one for me though ;)
I can get a render sorted after I move all my crap back into my room.
Post by: Ngt on Sun, 03 May 2015, 07:17:51
Post by: Evo_Spec on Sun, 03 May 2015, 10:13:14
Is it possible to paint a CF case?Yes, people paint carbon fiber cart parts all the time but unless you're going for a lightweight case, I don't see the point in choosing a carbon fiber case to paint rather than a steel/aluminum one.
Post by: hwood34 on Sun, 03 May 2015, 10:15:49
Post by: Ngt on Sun, 03 May 2015, 11:13:20
Is it possible to paint a CF case?Yes, people paint carbon fiber cart parts all the time but unless you're going for a lightweight case, I don't see the point in choosing a carbon fiber case to paint rather than a steel/aluminum one.
I hesitate with a Nerd NS 60 but this one is cheaper and I heard as well that Gon is quite busy atm and most orders are delayed by a lot. That's why I asked for the color.