Post by: quochung1989 on Tue, 24 February 2015, 07:36:24
Post by: bueller on Tue, 24 February 2015, 07:43:48
Post by: azhdar on Tue, 24 February 2015, 07:45:16
Post by: rainb1ood on Tue, 24 February 2015, 07:49:20
Post by: quochung1989 on Tue, 24 February 2015, 07:49:31
Duck never made any ISO compatible PCB right?Yes. Maybe because he live in Korea.
Post by: Lastpilot on Tue, 24 February 2015, 08:40:38
Post by: Sygaldry on Tue, 24 February 2015, 09:16:15
Thank god something like this came along.
I couldn't decide which GB to throw my money at.
This is the one!
Post by: quochung1989 on Tue, 24 February 2015, 09:21:00
This wins my money.Yes, you're confusing ha ha :D
Thank god something like this came along.
I couldn't decide which GB to throw my money at.
This is the one!
Post by: metalliqaz on Tue, 24 February 2015, 09:21:35
Post by: Sygaldry on Tue, 24 February 2015, 09:21:57
Not anymore =]This wins my money.Yes, you're confusing ha ha :D
Thank god something like this came along.
I couldn't decide which GB to throw my money at.
This is the one!
The gods have spoken.
I am to buy a Orion V2.
Post by: quochung1989 on Tue, 24 February 2015, 09:24:25
Not anymore =]This wins my money.Yes, you're confusing ha ha :D
Thank god something like this came along.
I couldn't decide which GB to throw my money at.
This is the one!
The gods have spoken.
I am to buy a Orion V2.
Well :D You decided hehe.
Post by: tuantruong on Tue, 24 February 2015, 10:05:17
Post by: Blackehart on Tue, 24 February 2015, 12:36:15
Post by: zennasyndroxx on Tue, 24 February 2015, 12:54:42
I really like the 84 but hopefully there will be a version without the 3 holes beside the esc and the 5 holes above wasd :<
Post by: isaske on Tue, 24 February 2015, 13:05:08
Post by: whentheclouds on Tue, 24 February 2015, 13:10:49
This wins my money.didn't you just buy a Novatouch for the Hyperfuse set? your wallet has a ..fast refractory period :eek:
Thank god something like this came along.
I couldn't decide which GB to throw my money at.
This is the one!
Post by: exitfire401 on Tue, 24 February 2015, 13:19:06
Post by: Sygaldry on Tue, 24 February 2015, 13:20:23
you can always get a sticker and cover up the arrow LEDs. the ESC LEDs on the other hand i don't mind as muchNo I bought a used QFR for about 60 dollars lolThis wins my money.didn't you just buy a Novatouch for the Hyperfuse set? your wallet has a ..fast refractory period :eek:
Thank god something like this came along.
I couldn't decide which GB to throw my money at.
This is the one!
Post by: demik on Tue, 24 February 2015, 14:15:53
So many LEDs these days. Starting to look tacky, IMHO.
Not starting. Has always been tacky.
Post by: Puddsy on Tue, 24 February 2015, 14:17:34
it's sexy af
prolly sell off one of my filcos or my DS3 or sth
Post by: Keyzus on Tue, 24 February 2015, 14:35:11
Anyone know what these LEDs are supposed to indicate? I get the 3 next to Esc. (Caps/Scroll/Num) but what about the 5 above the arrow cluster? :confused:
Post by: limitz on Tue, 24 February 2015, 14:44:03
1. TX 1800
2. Lightsaver V2 (round 3)
3. Orion V2
4. TX87
5. LZ-SQ
6. *Insert GMK Buy here*
Post by: whentheclouds on Tue, 24 February 2015, 14:45:02
Post by: Flyersfan1 on Tue, 24 February 2015, 14:52:39
Let's see how GH is going to make me poor. Let me count the ways:(http://www.reactiongifs.com/r/paid.gif)
1. TX 1800
2. Lightsaver V2 (round 3)
3. Orion V2
4. TX87
5. LZ-SQ
6. *Insert GMK Buy here*
Post by: bowji on Tue, 24 February 2015, 14:59:08
Let's see how GH is going to make me poor. Let me count the ways:
1. TX 1800
2. Lightsaver V2 (round 3)
3. Orion V2
4. TX87
5. LZ-SQ
6. *Insert GMK Buy here*Show Image(http://www.reactiongifs.com/r/paid.gif)
Another beautiful board....
Theres no end to new groupbuys :'(
I somehow gotta overcome this greeeeeeed!
Post by: Lastpilot on Tue, 24 February 2015, 15:12:49
Let's see how GH is going to make me poor. Let me count the ways:
1. TX 1800
2. Lightsaver V2 (round 3)
3. Orion V2
4. TX87
5. LZ-SQ
6. *Insert GMK Buy here*
Out of all those boards the orion will probably cost the most. Not sure if that helps you prioritize though lol.
Post by: BrewCaps on Tue, 24 February 2015, 15:20:21
Post by: cooldiscretion on Tue, 24 February 2015, 15:25:06
This Orion V2 is beautiful though. V1 only slightly pre-dates my time here at Geekhack and I always was sad I missed out. I hope Elton is ready for this since he seems to do all their GBs. :D
I absolutely love the blockers as part of the case though. So classic. It seems duck will now have a board to directly compete with some of the OTD boards.
Post by: Flyersfan1 on Tue, 24 February 2015, 15:26:09
How much is it?R1 was $400 before shipping.
Post by: hwood34 on Tue, 24 February 2015, 16:01:46
Post by: daerid on Tue, 24 February 2015, 16:13:43
Post by: Sygaldry on Tue, 24 February 2015, 16:17:08
(probably the one with the flat bottom)
Post by: whentheclouds on Tue, 24 February 2015, 16:25:49
Post by: limitz on Tue, 24 February 2015, 17:22:05
I absolutely love the blockers as part of the case though. So classic. It seems duck will now have a board to directly compete with some of the OTD boards.
Me too. I've recently acquired an OG Desko set (not the one in the Classifieds), and only looking for a board to put it on. Originally was going to try to put it on an 86 key, and try to get some 1u keys to fill in the middle key, but I think the set would look amazing on an 84 key board.
Post by: cooldiscretion on Tue, 24 February 2015, 17:24:33
I absolutely love the blockers as part of the case though. So classic. It seems duck will now have a board to directly compete with some of the OTD boards.
Me too. I've recently acquired an OG Desko set (not the one in the Classifieds), and only looking for a board to put it on. Originally was going to try to put it on an 86 key, and try to get some 1u keys to fill in the middle key, but I think the set would look amazing on an 84 key board.
You'll be the coolest kid on the block for sure. :p
I'm guessing that would look stellar.
Post by: Fnzzy on Tue, 24 February 2015, 17:49:38
So many LEDs these days. Starting to look tacky, IMHO.
Yes! I could probably tolerate the acryllic layer between the two case parts but those indicator LEDs on the top housing look terribly out of place. :'( Other than that it comes with everything I want. 84 keys and dark grey / black color. Guess I'll wait for the next one.
Post by: tuantruong on Tue, 24 February 2015, 19:38:01
winkey & winkeyless top housing.
Alu, Acrylic bottom housing.
it will include acrylic insert. if you choose alu bottom.
Group Buy will open from him(elton5354)"
Just saw this on Duck's site: http://duck0113.tistory.com/116
Those inserts are included this time, and seems the GB will be handled by da man Elton, hope it comes soon. so excited.
Post by: cooldiscretion on Tue, 24 February 2015, 20:54:36
On a side note, this is the formula for # of case LEDs: ( [Keyboard Version Number] * 8 ) + 4
Post by: Evo_Spec on Tue, 24 February 2015, 22:03:32
Post by: tuantruong on Tue, 24 February 2015, 22:12:19
Not sure how i feel about the LED's holes on the top but i really like the design for the lighting plates along with the original wedge.I'm totally fine with the LEDs next to the Esc, but I wish they could engrave a logo like the Kingsaver instead of the LED holes above the arrow keys.
Post by: bueller on Tue, 24 February 2015, 22:12:23
Post by: Evo_Spec on Tue, 24 February 2015, 22:39:13
Not sure how i feel about the LED's holes on the top but i really like the design for the lighting plates along with the original wedge.I'm totally fine with the LEDs next to the Esc, but I wish they could engrave a logo like the Kingsaver instead of the LED holes above the arrow keys.
Yeah i really like the branding of the 356, would love to see something engraved there on this too.
Post by: JaccoW on Wed, 25 February 2015, 05:31:28
Other than that it could be a unique and beautiful board with the right color LED.
Those Koreans are way too hung up on unicorn vomit backlighting. :P
Post by: Evo_Spec on Wed, 25 February 2015, 07:24:20
Those Koreans are way too hung up on unicorn vomit backlighting. :P
I love backlighting though......maybe it's an Asian thing.
Post by: quochung1989 on Wed, 25 February 2015, 08:19:51
Post by: bahamot on Wed, 25 February 2015, 08:37:40
Post by: metalliqaz on Wed, 25 February 2015, 22:33:47
This looks great, just hope GB offers fully built keyboard option.
Not likely
Post by: Nai_Calus on Wed, 25 February 2015, 22:59:27
From the hate in this thread I was expecting to click through to giant blaring lights, not tiny little pinpricks that look smaller than the lock indicators on my Code. Wait, what?
Looks sexy, but sadly I consider TKL the worst of all possible worlds for standard keyboard sizes, at least in my usage, so it's an auto-pass.
Post by: Fnzzy on Thu, 26 February 2015, 06:36:20
Post by: JaccoW on Thu, 26 February 2015, 06:39:26
Or just throw in some SIP sockets and experiment. :P
@Nai_calus: What do you consider the best layout?
Post by: bueller on Thu, 26 February 2015, 06:45:45
It could look baller as hell with a silver case, white backlight and purple leds behind the layer indicator holes.
Or just throw in some SIP sockets and experiment. :P
@Nai_calus: What do you consider the best layout?
I'm considering dark grey anodising with white indicator LEDs all round. Probably wouldn't do LEDs on the sides.
Really think I'm going to try and buy one of these, just might need to sell a few things :P
Post by: Krytone on Thu, 26 February 2015, 20:07:57
Post by: hwood34 on Fri, 27 February 2015, 13:54:34
Well it has Side LEDs, an acryllic layer with LEDs, in switch LEDs and now LEDs ON THE CASE? Enough is enough :Pit's never enough :))
Post by: Nai_Calus on Fri, 27 February 2015, 14:26:03
Well it has Side LEDs, an acryllic layer with LEDs, in switch LEDs and now LEDs ON THE CASE? Enough is enough :P
Yes, but you can turn those off, I presume, and no one was complaining about that, just the holes on the casing. XD Which, I was expecting a lot worse given the common trends in bling.
@Nai_calus: What do you consider the best layout?
I'm apparently the only person in the world who feels that a full-size is the best and only reasonable daily use keyboard. I make frequent use of alt codes and number entry, use the nav cluster a lot, and while I don't use them constantly, I do use a couple of F keys frequently. 60% boards have their place as something portable, but TKLs slap a bunch of extra space on with keys I use less than the numpad, without the convenience of having a numpad. I've got wide shoulders so I don't feel uncomfortable using a mouse next to a fullsize. So really, worst of all possible worlds for me. Lacking keys I need, and not saving enough space for if I need to take it somewhere or use it as a gaming board.
I have a 60% with Gateron Clears I pull out when I play games with a lot of keyboard commands because it's less taxing than my MX Clears. It fits nicely on my desk with my Code pushed back. I have a few NumPad shortcuts that I don't have bound to my mouse as well in-game, so with that setup I can still use them. A TKL would be too big to do that with because of the F row.
Granted, I find all standard layouts to be pretty bad, and wish someone would make an ergonomic or at least ortholinear keyboard with a numberpad besides Maltron.
Post by: elton5354 on Sat, 28 February 2015, 23:33:08
As you can see, there will probably be three options for this set. Most likely the cheapest one will be the flat acrylic bottom, then the acrylic block bottom, and then the full metal case.
I'll see if the sets can be broken up to buy separate bottoms as some of you mentioned.
No doubt this group buy will go as smooth as all my other group buys and I hope you all will enjoy it as much as I do during the process.
Post by: slickmamba on Sat, 28 February 2015, 23:44:43
This group buy will be up soon™Ty for all your work Elton! Can't wait
As you can see, there will probably be three options for this set. Most likely the cheapest one will be the flat acrylic bottom, then the acrylic block bottom, and then the full metal case.
I'll see if the sets can be broken up to buy separate bottoms as some of you mentioned.
No doubt this group buy will go as smooth as all my other group buys and I hope you all will enjoy it as much as I do during the process.
Post by: tuantruong on Sun, 01 March 2015, 01:54:59
This group buy will be up soon™Thanks for the update Elton!
As you can see, there will probably be three options for this set. Most likely the cheapest one will be the flat acrylic bottom, then the acrylic block bottom, and then the full metal case.
I'll see if the sets can be broken up to buy separate bottoms as some of you mentioned.
No doubt this group buy will go as smooth as all my other group buys and I hope you all will enjoy it as much as I do during the process.
Really excited about it.
BTW, I wonder if the V2 PCB would fit in the V1? I got my broken V1's PCB fixed by thechemist, but that would be great if I got a backup just in case. :p
Post by: Fnzzy on Tue, 03 March 2015, 18:59:23
(http://cfile30.uf.tistory.com/image/2438FC3B54EC2C211CC39D)
Post by: tuantruong on Wed, 04 March 2015, 11:04:44
Does anybody know if this lower angled bottom part is aluminum? Is it included in the GB?I think the picture is the render of the aluminum bottom, which is a option in GB besides flat acrylic and full acrylic bottoms.Show Image(http://cfile30.uf.tistory.com/image/2438FC3B54EC2C211CC39D)
Seems V2 does support the alps switches, and those LEDs above the arrow keys look not as bad as I thought.
http://kbdlab.co.kr/index.php?document_srl=2381083&mid=board_Lsno50
Post by: Fnzzy on Wed, 04 March 2015, 11:57:17
Post by: tuantruong on Wed, 04 March 2015, 14:11:49
Does that mean there will be 2 different full aluminum bottoms? The one on the picture I have linked doesn't seem to support any acryllic side pieces nor the sandwiched pieces.My bad, just did a gg translate with the OP's link, and seems your picture is the acrylic bottom, not the aluminum one.
Post by: Sygaldry on Wed, 04 March 2015, 14:31:30
Does that mean there will be 2 different full aluminum bottoms? The one on the picture I have linked doesn't seem to support any acryllic side pieces nor the sandwiched pieces.That's what it looks like. 3 choices in two materials: Flat bottom, angled bottom with flat acrylic insert, and solid bottom.
Post by: Fnzzy on Wed, 04 March 2015, 14:33:37
Does that mean there will be 2 different full aluminum bottoms? The one on the picture I have linked doesn't seem to support any acryllic side pieces nor the sandwiched pieces.My bad, just did a gg translate with the OP's link, and seems your picture is the acrylic bottom, not the aluminum one.
Ah okay, I assumed this bottom would also be available in aluminum since he uploaded a picture of the render, once in solid color and once in translucent white. Too bad :(
Does that mean there will be 2 different full aluminum bottoms? The one on the picture I have linked doesn't seem to support any acryllic side pieces nor the sandwiched pieces.That's what it looks like. 3 choices in two materials: Flat bottom, angled bottom with flat acrylic insert, and solid bottom.
Maybe it is aluminum then? I will just wait for the group buy and I will see ;D
Post by: elton5354 on Wed, 04 March 2015, 20:41:03
http://kbdlab.co.kr/index.php?document_srl=2381083&mid=board_Lsno50
Post by: hwood34 on Wed, 04 March 2015, 22:59:42
ALPS on Orion V2?!?oh lerd yes
http://kbdlab.co.kr/index.php?document_srl=2381083&mid=board_Lsno50
Post by: Heliosphere on Thu, 05 March 2015, 01:26:55
ALPS on Orion V2?!?
http://kbdlab.co.kr/index.php?document_srl=2381083&mid=board_Lsno50
Oh no now I'll have to order two kits, one for Alps and MX. Really though, that's awesome!
Post by: rainb1ood on Thu, 05 March 2015, 21:45:53
Post by: Sygaldry on Thu, 05 March 2015, 22:15:34
That clear acrylic bottom is sexy. Sometimes you can just flip the board over and stare at it.Stare at it and burn your eyes out while you're at it lol
Post by: tribade on Thu, 05 March 2015, 22:43:42
...I'm going to be spending more money soon I can feel it
Post by: hwood34 on Fri, 06 March 2015, 11:25:24
worfThat clear acrylic bottom is sexy. Sometimes you can just flip the board over and stare at it.Stare at it and burn your eyes out while you're at it lol
Post by: tuantruong on Sat, 07 March 2015, 02:44:58
http://kbdlab.co.kr/index.php?document_srl=2418293&mid=board_Lsno50
Post by: bueller on Sat, 07 March 2015, 03:33:36
Post by: Fnzzy on Sat, 07 March 2015, 05:19:11
Am I the only one that thinks the angle on that is insane? Actually kind of putting me off buying one.
11° is actually great, but I still hope that the lower angled bottom will be available in aluminum.
Post by: Lastpilot on Sat, 07 March 2015, 15:20:16
Am I the only one that thinks the angle on that is insane? Actually kind of putting me off buying one.I'm with you on that, I've tried multiple times typing with my keyboard raised and I really can't last five minutes without my wrists hurting.
With that being said, I will probably order the clear flat bottom and replace the feet with small clear bumpers [link (http://www.homedepot.com/p/OOK-1-2-in-Clear-Plastic-Self-Adhesive-Bumpers-8-Pack-50660/100019610)].
Post by: Sygaldry on Sat, 07 March 2015, 16:28:27
If I end up getting one of these, it'll either be a flat bottom or the solid angled bottom.
Post by: Fnzzy on Sat, 07 March 2015, 22:19:12
Post by: DrHubblePhD on Sat, 07 March 2015, 22:32:15
Post by: Evo_Spec on Sat, 07 March 2015, 23:46:08
Post by: pasph on Wed, 11 March 2015, 17:45:45
http://duck0113.tistory.com/118
Post by: Fnzzy on Wed, 11 March 2015, 17:48:53
Except those horrible LEDs on the top case :mad:
Post by: Lpwl on Wed, 11 March 2015, 18:15:31
ISO!
http://duck0113.tistory.com/118
This ! :-*
Post by: SavvyBird on Wed, 11 March 2015, 18:38:23
Post by: Latin00032 on Wed, 11 March 2015, 18:40:11
So some people can pick one around 7 degrees.
Post by: dorkvader on Wed, 11 March 2015, 21:57:22
So many LEDs these days. Starting to look tacky, IMHO.
I install them on principle and keep them off for the same reason.
Dat 11 degree angle! I wish they had dual angle options.
So some people can pick one around 7 degrees.
It's quite usable while standing. I kept the feet up on my model F on my standing desk also :o
Is it going to be anodized? :-\
Of course. Even raw aluminum develops an oxide coating in air.
Post by: metalliqaz on Wed, 11 March 2015, 22:00:39
Post by: HTN47 on Thu, 12 March 2015, 02:25:18
Post by: SavvyBird on Thu, 12 March 2015, 02:37:05
Post by: azhdar on Thu, 12 March 2015, 03:19:37
ISO!wow Viper ISO hype
http://duck0113.tistory.com/118
Post by: Ngt on Thu, 12 March 2015, 04:08:51
Post by: elton5354 on Thu, 12 March 2015, 10:19:49
What is confirmed is the optional ALPs PCB and Plate. You cannot replace MX PCB which is mandatory per set.
Post by: azhdar on Thu, 12 March 2015, 10:22:20
Post by: elton5354 on Thu, 12 March 2015, 10:24:37
Hey elton if you hear about a Viper ISO let us know, so I can start stacking up the wallet.
That picture was Orion v2 ISO plate not the Viper. I never heard anything about that
Post by: Flyersfan1 on Thu, 12 March 2015, 12:40:52
Hey Elton, do you expect the price of the full metal case to stay the same from r1? Thanks!Hey elton if you hear about a Viper ISO let us know, so I can start stacking up the wallet.
That picture was Orion v2 ISO plate not the Viper. I never heard anything about that
Post by: elton5354 on Fri, 13 March 2015, 07:00:20
Hey Elton, do you expect the price of the full metal case to stay the same from r1? Thanks!Hey elton if you hear about a Viper ISO let us know, so I can start stacking up the wallet.
That picture was Orion v2 ISO plate not the Viper. I never heard anything about that
I can't say for sure since I don't have the price yet, but I'd guess it's similar in price..
Post by: monotagary on Fri, 13 March 2015, 15:15:56
Looks like I'm going to need to sell some more stuff...
Post by: SavvyBird on Sat, 14 March 2015, 14:45:19
Post by: sirisaac1982 on Sat, 14 March 2015, 15:03:31
Let's see how GH is going to make me poor. Let me count the ways:
1. TX 1800
2. Lightsaver V2 (round 3)
3. Orion V2
4. TX87
5. LZ-SQ
6. *Insert GMK Buy here*
My thoughts exactly LOL
Post by: JaccoW on Sat, 14 March 2015, 15:49:22
- LK-1800fe (https://geekhack.org/index.php?topic=69494)Let's see how GH is going to make me poor. Let me count the ways:
1. TX 1800
2. Lightsaver V2 (round 3)
3. Orion V2
4. TX87
5. LZ-SQ
6. *Insert GMK Buy here*
My thoughts exactly LOL
- Lightpad (https://geekhack.org/index.php?topic=69619)
:P
Post by: elton5354 on Sun, 15 March 2015, 12:51:02
(http://kbdlab.co.kr/files/attach/images/340/979/493/002/c428d19cca751c7b0e185d67d448bc41.jpg)
Post by: Fnzzy on Sun, 15 March 2015, 13:04:09
Looks like they will be offering 3 different materials for their plates.Show Image(http://kbdlab.co.kr/files/attach/images/340/979/493/002/c428d19cca751c7b0e185d67d448bc41.jpg)
That looks pretty sick. Do acryllic plates and metal plates feel very different?
Post by: monotagary on Sun, 15 March 2015, 14:59:21
Looks like they will be offering 3 different materials for their plates.Show Image(http://kbdlab.co.kr/files/attach/images/340/979/493/002/c428d19cca751c7b0e185d67d448bc41.jpg)
That looks pretty sick. Do acryllic plates and metal plates feel very different?
Different plates accommodate different switch types better. I'm pretty sure STS is great for linears or something like that.
Post by: sethk_ on Sun, 15 March 2015, 15:01:03
Post by: Ngt on Sun, 15 March 2015, 16:13:08
Looks like they will be offering 3 different materials for their plates.Show Image(http://kbdlab.co.kr/files/attach/images/340/979/493/002/c428d19cca751c7b0e185d67d448bc41.jpg)
That looks pretty sick. Do acryllic plates and metal plates feel very different?
Different plates accommodate different switch types better. I'm pretty sure STS is great for linears or something like that.
STS?
Post by: SavvyBird on Sun, 15 March 2015, 16:21:13
Looks like they will be offering 3 different materials for their plates.Show Image(http://kbdlab.co.kr/files/attach/images/340/979/493/002/c428d19cca751c7b0e185d67d448bc41.jpg)
:-*
Post by: Fnzzy on Sun, 15 March 2015, 16:32:49
Looks like they will be offering 3 different materials for their plates.Show Image(http://kbdlab.co.kr/files/attach/images/340/979/493/002/c428d19cca751c7b0e185d67d448bc41.jpg)
That looks pretty sick. Do acryllic plates and metal plates feel very different?
Different plates accommodate different switch types better. I'm pretty sure STS is great for linears or something like that.
STS?
Stainless Steel, most likely.
I will probably install some blacks if I end up getting an Orion v2. Should I go with a stainless steel plate then? I never had an acryllic plate and they look cool.
Post by: azhdar on Sun, 15 March 2015, 16:35:28
Stainless steelLooks like they will be offering 3 different materials for their plates.Show Image(http://kbdlab.co.kr/files/attach/images/340/979/493/002/c428d19cca751c7b0e185d67d448bc41.jpg)
That looks pretty sick. Do acryllic plates and metal plates feel very different?
Different plates accommodate different switch types better. I'm pretty sure STS is great for linears or something like that.
STS?
Post by: Ngt on Sun, 15 March 2015, 16:57:06
Stainless steelLooks like they will be offering 3 different materials for their plates.Show Image(http://kbdlab.co.kr/files/attach/images/340/979/493/002/c428d19cca751c7b0e185d67d448bc41.jpg)
That looks pretty sick. Do acryllic plates and metal plates feel very different?
Different plates accommodate different switch types better. I'm pretty sure STS is great for linears or something like that.
STS?
Cool thanks buddy. Are you going into the korean custom market now? :D
Post by: Sygaldry on Sun, 15 March 2015, 16:59:21
stainless steel i think?Looks like they will be offering 3 different materials for their plates.Show Image(http://kbdlab.co.kr/files/attach/images/340/979/493/002/c428d19cca751c7b0e185d67d448bc41.jpg)
That looks pretty sick. Do acryllic plates and metal plates feel very different?
Different plates accommodate different switch types better. I'm pretty sure STS is great for linears or something like that.
STS?
edit: oops someone beat me to it
Post by: Ngt on Sun, 15 March 2015, 17:05:19
stainless steel i think?Looks like they will be offering 3 different materials for their plates.Show Image(http://kbdlab.co.kr/files/attach/images/340/979/493/002/c428d19cca751c7b0e185d67d448bc41.jpg)
That looks pretty sick. Do acryllic plates and metal plates feel very different?
Different plates accommodate different switch types better. I'm pretty sure STS is great for linears or something like that.
STS?
edit: oops someone beat me to it
Thanks anyway. ;)
Post by: Fnzzy on Sun, 15 March 2015, 17:21:21
Post by: quochung1989 on Sun, 15 March 2015, 21:13:39
I hope we can buy multiple plates in the GB. :DWhat do you want to do?
Post by: monotagary on Sun, 15 March 2015, 23:35:01
Post by: azhdar on Mon, 16 March 2015, 02:05:05
*Stainless steelLooks like they will be offering 3 different materials for their plates.Show Image(http://kbdlab.co.kr/files/attach/images/340/979/493/002/c428d19cca751c7b0e185d67d448bc41.jpg)
That looks pretty sick. Do acryllic plates and metal plates feel very different?
Different plates accommodate different switch types better. I'm pretty sure STS is great for linears or something like that.
STS?
Cool thanks buddy. Are you going into the korean custom market now? :D
well if they start doing ISO, I will :)
Post by: dustinhxc on Mon, 16 March 2015, 02:09:23
Post by: Ngt on Mon, 16 March 2015, 03:49:54
*Stainless steelLooks like they will be offering 3 different materials for their plates.Show Image(http://kbdlab.co.kr/files/attach/images/340/979/493/002/c428d19cca751c7b0e185d67d448bc41.jpg)
That looks pretty sick. Do acryllic plates and metal plates feel very different?
Different plates accommodate different switch types better. I'm pretty sure STS is great for linears or something like that.
STS?
Cool thanks buddy. Are you going into the korean custom market now? :D
well if they start doing ISO, I will :)
Wallet RIP IN PEPERONI.
Post by: Fnzzy on Mon, 16 March 2015, 07:34:42
I hope we can buy multiple plates in the GB. :DWhat do you want to do?
Just to see what different plates feel like. And if we get to order additional PCBs as well, then even better, I can solder 2 PCBs with both plates!
Post by: elton5354 on Mon, 16 March 2015, 08:21:12
Post by: slickmamba on Mon, 16 March 2015, 08:31:20
Post by: monotagary on Mon, 16 March 2015, 12:24:46
Any more estimation/update on time? ty elton! :)
Also interested in knowing this! Gotta start getting my funds in order for this one.
Post by: Fnzzy on Mon, 16 March 2015, 14:40:18
The plastic plate isn't acrylic. It's a flexible plastic plate. The aluminum plate won't have an anodized option. You can order extras as long as you order a main set.
Great news, thanks.
Post by: elton5354 on Mon, 16 March 2015, 21:25:45
Post by: monotagary on Mon, 16 March 2015, 21:52:14
It will start at the end of this week probably.
Woo! Time to get some money.
Post by: quochung1989 on Tue, 17 March 2015, 00:07:27
It will start at the end of this week probably.Great.
Post by: SavvyBird on Tue, 17 March 2015, 00:07:58
It will start at the end of this week probably.
all in my last keyboard ;D
Post by: elton5354 on Tue, 17 March 2015, 08:27:12
http://kbdlab.co.kr/index.php?document_srl=2506641&mid=board_Lsno50
http://duck0113.tistory.com/119
(http://kbdlab.co.kr/files/attach/images/340/641/506/002/a677a199ba2a7abdeb196c9acb456c31.JPG)
I'm probably getting this acrylic bottom set. :cool:
Post by: slickmamba on Tue, 17 March 2015, 08:33:04
Post by: monotagary on Tue, 17 March 2015, 08:33:58
Angle on orion is 11deg? What is the angle on the viper?
11 too
Post by: elton5354 on Tue, 17 March 2015, 08:34:33
Angle on orion is 11deg? What is the angle on the viper?
I believe it's 11 deg on the viper and on the orion v2, but it looks like it's a bit lower with the acrylic bottom.
It is 7 degrees with the acrylic bottom
Post by: monotagary on Tue, 17 March 2015, 08:46:58
Post by: Fnzzy on Tue, 17 March 2015, 10:06:51
Post by: quochung1989 on Tue, 17 March 2015, 10:26:01
I am guessing the 7 degree acrylic bottom will not be available in aluminum? The render duck posted a week or so ago showed it with a solid material. Guess I interpreted it wrong then.
+1. This make me discouraged.
Post by: jjang023 on Tue, 17 March 2015, 10:55:03
Acrylic lower plate material , it was produced by using the light diffusion plate .
And of light spread is highly recommend .
It is even more beautiful and actually see .
Post by: Ngt on Tue, 17 March 2015, 11:06:01
Pictures of Orion acrylic bottom piece is up!
http://kbdlab.co.kr/index.php?document_srl=2506641&mid=board_Lsno50 (http://kbdlab.co.kr/index.php?document_srl=2506641&mid=board_Lsno50)
http://duck0113.tistory.com/119 (http://duck0113.tistory.com/119)Show Image(http://kbdlab.co.kr/files/attach/images/340/641/506/002/a677a199ba2a7abdeb196c9acb456c31.JPG)
I'm probably getting this acrylic bottom set. 8)
Damn it is so beautiful! According to the link you posted there are 3 choices of bottom case, aren't there? One STS/alu, one with glass and one acrylic?
Post by: monotagary on Tue, 17 March 2015, 11:08:54
Pictures of Orion acrylic bottom piece is up!
http://kbdlab.co.kr/index.php?document_srl=2506641&mid=board_Lsno50 (http://kbdlab.co.kr/index.php?document_srl=2506641&mid=board_Lsno50)
http://duck0113.tistory.com/119 (http://duck0113.tistory.com/119)Show Image(http://kbdlab.co.kr/files/attach/images/340/641/506/002/a677a199ba2a7abdeb196c9acb456c31.JPG)
I'm probably getting this acrylic bottom set. 8)
Damn it is so beautiful! According to the link you posted there are 3 choices of bottom case, aren't there? One STS/alu, one with glass and one acrylic?
I think the options are:
1. Full aluminium bottom, 11deg angle
2. Frosted acrylic bottom, 7deg angle
3. Transparent acrylic bottom, 0deg angle
Post by: zennasyndroxx on Tue, 17 March 2015, 11:31:30
Pictures of Orion acrylic bottom piece is up!
http://kbdlab.co.kr/index.php?document_srl=2506641&mid=board_Lsno50 (http://kbdlab.co.kr/index.php?document_srl=2506641&mid=board_Lsno50)
http://duck0113.tistory.com/119 (http://duck0113.tistory.com/119)Show Image(http://kbdlab.co.kr/files/attach/images/340/641/506/002/a677a199ba2a7abdeb196c9acb456c31.JPG)
I'm probably getting this acrylic bottom set. 8)
Damn it is so beautiful! According to the link you posted there are 3 choices of bottom case, aren't there? One STS/alu, one with glass and one acrylic?
I think the options are:
1. Full aluminium bottom, 11deg angle
2. Frosted acrylic bottom, 7deg angle
3. Transparent acrylic bottom, 0deg angle
I believe the transparent acrylic piece will include aluminum feets for you to use. around 7 degs IINM.
Post by: elton5354 on Tue, 17 March 2015, 12:09:40
(http://cfile29.uf.tistory.com/image/25582B4F550839F42887CB)
Post by: animated on Tue, 17 March 2015, 12:20:29
Post by: Ngt on Tue, 17 March 2015, 13:16:11
Post by: monotagary on Tue, 17 March 2015, 13:17:39
Would the price vary depending on the bottom you take or would they all be the same price?
Price will vary. Full alu will be the most expensive. Flat acrylic will be the cheapest.
Post by: Ngt on Tue, 17 March 2015, 13:47:00
I wonder how it would look wiyh the flat acrylic and the bottom led.Would the price vary depending on the bottom you take or would they all be the same price?
Price will vary. Full alu will be the most expensive. Flat acrylic will be the cheapest.
Post by: monotagary on Tue, 17 March 2015, 14:01:09
I wonder how it would look wiyh the flat acrylic and the bottom led.Would the price vary depending on the bottom you take or would they all be the same price?
Price will vary. Full alu will be the most expensive. Flat acrylic will be the cheapest.
http://kbdlab.co.kr/index.php?document_srl=2381083&mid=board_Lsno50
That link should show you exactly what you're looking for.
Post by: elton5354 on Tue, 17 March 2015, 15:29:14
Aluminum bottom
http://duck0113.tistory.com/117
(http://cfile7.uf.tistory.com/image/251FDA4C54FAB258039019)
Acrylic bottom
http://duck0113.tistory.com/119
(http://cfile23.uf.tistory.com/image/226D4D4F550839F5194907)
Flat acrylic bottom
http://kbdlab.co.kr/index.php?document_srl=2381083&mid=board_Lsno50
(http://kbdlab.co.kr/files/attach/images/340/083/381/002/3e31be6e96b254b2ba8dfbf893ec2b81.JPG)
(http://kbdlab.co.kr/files/attach/images/340/083/381/002/9e8879ff64acb80f3c78ba7385aaa4f6.JPG)
Note that ALPs PCB will be different than MX's.
Post by: monotagary on Tue, 17 March 2015, 15:47:22
Post by: radio_killah on Tue, 17 March 2015, 15:51:40
Post by: SavvyBird on Tue, 17 March 2015, 16:04:39
Post by: monotagary on Tue, 17 March 2015, 16:31:37
What alu color would go nice with hyper fuse gmk or dolch gmk
Silver will look good with Hyperfuse probably, and black would look good with Dolch.
Post by: Sygaldry on Tue, 17 March 2015, 16:50:49
Post by: Ngt on Tue, 17 March 2015, 16:53:43
Thank you. It looks cool.I wonder how it would look wiyh the flat acrylic and the bottom led.Would the price vary depending on the bottom you take or would they all be the same price?
Price will vary. Full alu will be the most expensive. Flat acrylic will be the cheapest.
http://kbdlab.co.kr/index.php?document_srl=2381083&mid=board_Lsno50
That link should show you exactly what you're looking for.
To summarize all 3 bottoms:Damn they the full ALU or the acrylic bottom are so nice. It is hard to choose. I'm going to regret this one as I don't have money for it ATM. Is it a one time sale or can you order it afterwards if you go through the website you linked?
Aluminum bottom
http://duck0113.tistory.com/117Show Image(http://cfile7.uf.tistory.com/image/251FDA4C54FAB258039019)
Acrylic bottom
http://duck0113.tistory.com/119Show Image(http://cfile23.uf.tistory.com/image/226D4D4F550839F5194907)
Flat acrylic bottom
http://kbdlab.co.kr/index.php?document_srl=2381083&mid=board_Lsno50Show Image(http://kbdlab.co.kr/files/attach/images/340/083/381/002/3e31be6e96b254b2ba8dfbf893ec2b81.JPG)Show Image(http://kbdlab.co.kr/files/attach/images/340/083/381/002/9e8879ff64acb80f3c78ba7385aaa4f6.JPG)
Note that ALPs PCB will be different than MX's.
Post by: pichu23 on Tue, 17 March 2015, 17:01:23
Pictures of Orion acrylic bottom piece is up!
http://kbdlab.co.kr/index.php?document_srl=2506641&mid=board_Lsno50
http://duck0113.tistory.com/119Show Image(http://kbdlab.co.kr/files/attach/images/340/641/506/002/a677a199ba2a7abdeb196c9acb456c31.JPG)
I'm probably getting this acrylic bottom set. :cool:
alright. gg. :p
Post by: Lpwl on Tue, 17 March 2015, 17:04:32
[...]
can you order it afterwards if you go through the website you linked?
Pretty sure, nop.
It's a one time sale (= groupbuy).
Post by: Flyersfan1 on Tue, 17 March 2015, 17:16:38
Post by: monotagary on Tue, 17 March 2015, 17:17:08
Thank you. It looks cool.I wonder how it would look wiyh the flat acrylic and the bottom led.Would the price vary depending on the bottom you take or would they all be the same price?
Price will vary. Full alu will be the most expensive. Flat acrylic will be the cheapest.
http://kbdlab.co.kr/index.php?document_srl=2381083&mid=board_Lsno50
That link should show you exactly what you're looking for.To summarize all 3 bottoms:Damn they the full ALU or the acrylic bottom are so nice. It is hard to choose. I'm going to regret this one as I don't have money for it ATM. Is it a one time sale or can you order it afterwards if you go through the website you linked?
Aluminum bottom
http://duck0113.tistory.com/117Show Image(http://cfile7.uf.tistory.com/image/251FDA4C54FAB258039019)
Acrylic bottom
http://duck0113.tistory.com/119Show Image(http://cfile23.uf.tistory.com/image/226D4D4F550839F5194907)
Flat acrylic bottom
http://kbdlab.co.kr/index.php?document_srl=2381083&mid=board_Lsno50Show Image(http://kbdlab.co.kr/files/attach/images/340/083/381/002/3e31be6e96b254b2ba8dfbf893ec2b81.JPG)Show Image(http://kbdlab.co.kr/files/attach/images/340/083/381/002/9e8879ff64acb80f3c78ba7385aaa4f6.JPG)
Note that ALPs PCB will be different than MX's.
I'm pretty sure it's going to be a one time deal, or you'll have to get one aftermarket... and it will hurt your wallet even more.
Post by: Ngt on Tue, 17 March 2015, 17:22:07
I was not talking about this sale thread but more like in general as I assume we would not be the only one buying it. Especially since it is done towards the Korean community as it seems.[...]
can you order it afterwards if you go through the website you linked?
Pretty sure, nop.
It's a one time sale (= groupbuy).
Post by: whentheclouds on Tue, 17 March 2015, 17:55:27
that's how custom boards retain their exclusivity. not having money is one thing, but delaying a purchase in hopes of it being available after the GB period is generally a bad idea if you really want the product
Post by: Fnzzy on Tue, 17 March 2015, 18:16:14
For those with Duck boards now, is the 11 degree angle comfortable to use? I know it's a preference like all things, I just worry it might be a bit of a shock to me since I'm used to using a much lower angle.
My Viper is comfortable to use and I haven't had a problem adjusting to it.
Post by: jonathanyu on Tue, 17 March 2015, 18:16:16
For those with Duck boards now, is the 11 degree angle comfortable to use? I know it's a preference like all things, I just worry it might be a bit of a shock to me since I'm used to using a much lower angle.
I have used butterfly keypad from Duck, and it's 11 degree. I personally prefer 12 degree, but 11 degree is actually pretty good to type on as well. But it would also depend on what keycaps profile you used on it.
Post by: Flyersfan1 on Tue, 17 March 2015, 18:19:19
Thanks Jonathan! I was most worried about unneeded wrist extension, but I'm sure I could adjust pretty quickly! :)For those with Duck boards now, is the 11 degree angle comfortable to use? I know it's a preference like all things, I just worry it might be a bit of a shock to me since I'm used to using a much lower angle.
I have used butterfly keypad from Duck, and it's 11 degree. I personally prefer 12 degree, but 11 degree is actually pretty good to type on as well. But it would also depend on what keycaps profile you used on it.
Post by: SavvyBird on Tue, 17 March 2015, 21:50:36
What alu color would go nice with hyper fuse gmk or dolch gmk
Silver will look good with Hyperfuse probably, and black would look good with Dolch.
What about the blue grey ?
Post by: monotagary on Tue, 17 March 2015, 22:37:48
What alu color would go nice with hyper fuse gmk or dolch gmk
Silver will look good with Hyperfuse probably, and black would look good with Dolch.
What about the blue grey ?
That would actually look pretty good too.
Post by: zennasyndroxx on Tue, 17 March 2015, 22:46:43
What alu color would go nice with hyper fuse gmk or dolch gmk
Silver will look good with Hyperfuse probably, and black would look good with Dolch.
What about the blue grey ?
blue grey with classic beige is alright for me.
Post by: quochung1989 on Tue, 17 March 2015, 23:36:36
Post by: monotagary on Wed, 18 March 2015, 00:12:31
What color is it availble in group buy? Or like previous GB: Silver, Black, Blue-Grey?
Based on the images we've seen so far, silver and blue-grey are confirmed. I personally want blue-grey so that's awesome, but hopefully there will be one or two more color options.
Post by: Cottonsox on Wed, 18 March 2015, 00:13:21
Post by: PunksDead on Wed, 18 March 2015, 00:15:27
This is getting harder and harder to resist.
Ill be your bad influence
Post by: Cottonsox on Wed, 18 March 2015, 00:16:53
This is getting harder and harder to resist.
Ill be your bad influence
pretty sure i am in, waiting on numbers to determine which base i can afford!
Post by: SavvyBird on Wed, 18 March 2015, 00:26:49
Also where can I get clear switches?
I'm already planning this out.
Post by: Ngt on Wed, 18 March 2015, 03:31:15
it's the same process anywere: the creator takes orders for a limited amount of time, then produces as many kits as required. if he makes some extra kits/has leftovers and sell them on his website, you can bet they'll be snapped up within a short period of time.
that's how custom boards retain their exclusivity. not having money is one thing, but delaying a purchase in hopes of it being available after the GB period is generally a bad idea if you really want the product
Thanks for the advice. I was asking because I may not have the cash to buy it atm. I'll just think through and see if I can afford it. :)
Post by: quochung1989 on Wed, 18 March 2015, 04:31:48
Where can I buy the smd leds that are on the pcb.
Also where can I get clear switches?
I'm already planning this out.
Maybe SMD led 'll pre-soldered like previous GB I think.
Post by: Ngt on Wed, 18 March 2015, 04:54:43
That'd be cool because I heard you have a hard time soldering those.Where can I buy the smd leds that are on the pcb.
Also where can I get clear switches?
I'm already planning this out.
Maybe SMD led 'll pre-soldered like previous GB I think.
Edit: forgot to ask. How long will the GB be running?
Post by: quochung1989 on Wed, 18 March 2015, 04:57:17
That'd be cool because I heard you have a hard time soldering those.Where can I buy the smd leds that are on the pcb.
Also where can I get clear switches?
I'm already planning this out.
Maybe SMD led 'll pre-soldered like previous GB I think.
Edit: forgot to ask. How long will the GB be running?
Only Ellton can anwser this question :p
Post by: quochung1989 on Wed, 18 March 2015, 07:44:32
Post by: ramnes on Wed, 18 March 2015, 09:18:48
Post by: SavvyBird on Wed, 18 March 2015, 15:24:29
i need it now
Post by: Ngt on Wed, 18 March 2015, 15:25:59
That'd be cool because I heard you have a hard time soldering those.Where can I buy the smd leds that are on the pcb.
Also where can I get clear switches?
I'm already planning this out.
Maybe SMD led 'll pre-soldered like previous GB I think.
Edit: forgot to ask. How long will the GB be running?
Only Ellton can anwser this question :p
Yeah I was hoping he could answer it. :D
https://youtu.be/XZ5WUSzXYi8 (https://youtu.be/XZ5WUSzXYi8)
Nice video. You can get a real sense of what it is going to look like.
Looks neat indeed. ISO support is awesome. Might be my first Korean too! That incline is a bit violent, tho.
I'm a bit worried it might be a hard change to get used to. I wonder if the Novatouch has some angle too.
Post by: monotagary on Thu, 19 March 2015, 12:41:22
I wish I didn't have to get a MX kit too. I really just want Alps! :))
Post by: HTN47 on Thu, 19 March 2015, 16:32:28
Hopefully I wont mess up :-X
Anyone have any recommendation for a budget soldering kit?
Post by: PunksDead on Thu, 19 March 2015, 16:41:43
Post by: Eugene on Thu, 19 March 2015, 16:44:22
Anyone have any recommendation for a budget soldering kit?
The temp-controlled Hakko or Weller kits are preferred here. Aoyue is a decent budget alternative.
Post by: Ngt on Thu, 19 March 2015, 16:45:19
Hmmm... If this group buy doesn't offer an option for full assembly I think this will be the first board I will ever try to make :D
Hopefully I wont mess up :-X
Anyone have any recommendation for a budget soldering kit?
Welcome to GH!
Here you would find what you want: https://geekhack.org/index.php?topic=42824.0;topicseen (https://geekhack.org/index.php?topic=42824.0;topicseen)
Post by: quochung1989 on Thu, 19 March 2015, 20:01:32
do these boards normally come with the SMDs + Controllers presoldered?
Maybe. I think so.
Post by: Lastpilot on Thu, 19 March 2015, 20:35:39
do these boards normally come with the SMDs + Controllers presoldered?Yes :]
Post by: monotagary on Thu, 19 March 2015, 20:51:35
do these boards normally come with the SMDs + Controllers presoldered?Yes :]
That's good to know. Soldering SMDs is a pain in the ass. :p
Post by: Ngt on Fri, 20 March 2015, 10:07:47
I've never done it but that's what I heard so far.do these boards normally come with the SMDs + Controllers presoldered?Yes :]
That's good to know. Soldering SMDs is a pain in the ass.
Post by: cooldiscretion on Fri, 20 March 2015, 10:51:47
I've never done it but that's what I heard so far.do these boards normally come with the SMDs + Controllers presoldered?Yes :]
That's good to know. Soldering SMDs is a pain in the ass.
I agree, but there are definitely so many pro tricks that make it much easier even if you only have a soldering iron.
I had no idea how I was going to solder the tiny diodes on my GON board with only an iron and no flux but it wasn't that hard after I watched a few videos and learned some tricks from youtube.
Without youtube though, it would be super frustrating and might feel like you need a third arm to do the task - one to hold component in place, one to hold iron, and another to feed in solder.
Post by: elton5354 on Sat, 21 March 2015, 09:24:05
I just got my SGI keyboard in the mail to harvest the keycaps and stabs... and I got my Chicony w/ Blue Alps yesterday to harvest switches from.
I wish I didn't have to get a MX kit too. I really just want Alps! :))
How much did you buy your blue alps board for? I can't really find one under $80.
Post by: Lastpilot on Sat, 21 March 2015, 10:05:09
- Must wait more...
(http://33.media.tumblr.com/74f5100f2299bc55f01d788c13ed7c4b/tumblr_ngdcgvUZg21s6sr40o2_r1_500.gif)
Post by: monotagary on Sat, 21 March 2015, 11:50:08
I just got my SGI keyboard in the mail to harvest the keycaps and stabs... and I got my Chicony w/ Blue Alps yesterday to harvest switches from.
I wish I didn't have to get a MX kit too. I really just want Alps! :))
How much did you buy your blue alps board for? I can't really find one under $80.
I snagged it for $60 :p
Post by: cooldiscretion on Sat, 21 March 2015, 11:51:46
I just got my SGI keyboard in the mail to harvest the keycaps and stabs... and I got my Chicony w/ Blue Alps yesterday to harvest switches from.
I wish I didn't have to get a MX kit too. I really just want Alps! :))
How much did you buy your blue alps board for? I can't really find one under $80.
I snagged it for $60 :p
How are you guys finding this stuff? I can't get any luck locating an SGI.
Post by: monotagary on Sat, 21 March 2015, 11:54:02
I just got my SGI keyboard in the mail to harvest the keycaps and stabs... and I got my Chicony w/ Blue Alps yesterday to harvest switches from.
I wish I didn't have to get a MX kit too. I really just want Alps! :))
How much did you buy your blue alps board for? I can't really find one under $80.
I snagged it for $60 :p
How are you guys finding this stuff? I can't get any luck locating an SGI.
I had been hunting for one of eBay for two weeks. It just takes patience... And maybe some luck. Or rather mostly some luck.
Post by: SL89 on Sat, 21 March 2015, 12:06:26
Post by: monotagary on Sat, 21 March 2015, 12:10:58
I'm sorry to crash this thread, but you Orion folks are my best hope at getting some information. Namely Full-Size Korean Custom Keyboards I see a lot of action for Orion, Viper, tx1800, lightsaver and etc but besides Gon's work, I've yet to see a really high quality full size. If any of you could point me in the right direction I'd appreciate it.
GONs NERD108 is the only full size Korean custom I know about. There are others that have all the functionality of a full size like the Lightsaver and TX1800, but they aren't standard full size boards.
Post by: SL89 on Sat, 21 March 2015, 12:13:51
Post by: whentheclouds on Sat, 21 March 2015, 12:24:42
Post by: SL89 on Sat, 21 March 2015, 12:31:44
Post by: whentheclouds on Sat, 21 March 2015, 12:33:00
Post by: SL89 on Sat, 21 March 2015, 12:33:56
Post by: KnivesM on Sat, 21 March 2015, 17:30:35
I'm sorry to crash this thread, but you Orion folks are my best hope at getting some information. Namely Full-Size Korean Custom Keyboards I see a lot of action for Orion, Viper, tx1800, lightsaver and etc but besides Gon's work, I've yet to see a really high quality full size. If any of you could point me in the right direction I'd appreciate it.LifeZone made a full size but I've never seen it besides his site so I doubt you'd be able to find one.
http://lzlife.tistory.com/entry/LZT-1 (http://lzlife.tistory.com/entry/LZT-1)
Post by: Dark_wizzie on Sun, 22 March 2015, 02:13:48
Post by: rabidwombat on Sun, 22 March 2015, 02:18:05
The keyboard isn't flat though. That's the dealbreaker for me, non-flat Korean keyboards.
If you looked through the prototypes and the thread, you will see there are at least 3 different versions..including a flat one with a clear acrylic base.
Post by: HTN47 on Sun, 22 March 2015, 20:43:09
Ohhh please Korean Gods, let this group buy happen NOW!! :-X
Post by: elton5354 on Sun, 22 March 2015, 20:45:50
Post by: slickmamba on Sun, 22 March 2015, 20:47:22
The keyboard isn't flat though. That's the dealbreaker for me, non-flat Korean keyboards.
(http://www.dudeiwantthat.com/gear/phones/Cube-Laser-Virtual-Keyboard-1212.jpg)
Post by: Dark_wizzie on Mon, 23 March 2015, 03:28:28
Oh comon, I can't believe I'm the only one bothered by a raised keyboard. While I get that a case that is raised is a cool option for people who want raised keyboards to begin with, that forces it on everybody else. Raised keyboards don't make sense ergonomically.The keyboard isn't flat though. That's the dealbreaker for me, non-flat Korean keyboards.Show Image(http://www.dudeiwantthat.com/gear/phones/Cube-Laser-Virtual-Keyboard-1212.jpg)
Post by: monotagary on Mon, 23 March 2015, 09:59:38
Oh comon, I can't believe I'm the only one bothered by a raised keyboard. While I get that a case that is raised is a cool option for people who want raised keyboards to begin with, that forces it on everybody else. Raised keyboards don't make sense ergonomically.The keyboard isn't flat though. That's the dealbreaker for me, non-flat Korean keyboards.Show Image(http://www.dudeiwantthat.com/gear/phones/Cube-Laser-Virtual-Keyboard-1212.jpg)
Who cares about ergonomics when your keyboard is THIS cool? B)
Post by: animated on Mon, 23 March 2015, 10:22:25
Oh comon, I can't believe I'm the only one bothered by a raised keyboard. While I get that a case that is raised is a cool option for people who want raised keyboards to begin with, that forces it on everybody else. Raised keyboards don't make sense ergonomically.The keyboard isn't flat though. That's the dealbreaker for me, non-flat Korean keyboards.Show Image(http://www.dudeiwantthat.com/gear/phones/Cube-Laser-Virtual-Keyboard-1212.jpg)
I believe an option is to go with the clear acrylic bottom and instead of using the supplied feet, you can just purchase small bumpers(feet) to avoid the raise.
Post by: 3Love on Mon, 23 March 2015, 21:18:01
Post by: cphead on Mon, 23 March 2015, 22:45:15
Post by: elton5354 on Mon, 23 March 2015, 23:13:57
If there was a 7 degree metal bottom I'd be all over that :3
Just get one of the acrylic versions ;)
Post by: Heliosphere on Mon, 23 March 2015, 23:30:25
I just got my SGI keyboard in the mail to harvest the keycaps and stabs... and I got my Chicony w/ Blue Alps yesterday to harvest switches from.
I wish I didn't have to get a MX kit too. I really just want Alps! :))
How much did you buy your blue alps board for? I can't really find one under $80.
I snagged it for $60 :p
Did you snag it from that guy selling it on Reddit? I pm'd him but someone else before me bought the blue alps board.
Post by: monotagary on Tue, 24 March 2015, 00:00:56
I just got my SGI keyboard in the mail to harvest the keycaps and stabs... and I got my Chicony w/ Blue Alps yesterday to harvest switches from.
I wish I didn't have to get a MX kit too. I really just want Alps! :))
How much did you buy your blue alps board for? I can't really find one under $80.
I snagged it for $60 :p
Did you snag it from that guy selling it on Reddit? I pm'd him but someone else before me bought the blue alps board.
Yes, it was me. I was hawking for a Blue Alps board for ages and then I see that ad like it was destiny so I jump on it no hesitation.
Post by: Heliosphere on Tue, 24 March 2015, 01:25:34
Well congrats on the buy! I was hesitating since I already have an orange alps donor board sitting around, but that was a good deal for blue alps.I just got my SGI keyboard in the mail to harvest the keycaps and stabs... and I got my Chicony w/ Blue Alps yesterday to harvest switches from.
I wish I didn't have to get a MX kit too. I really just want Alps! :))
How much did you buy your blue alps board for? I can't really find one under $80.
I snagged it for $60
Did you snag it from that guy selling it on Reddit? I pm'd him but someone else before me bought the blue alps board.
Yes, it was me. I was hawking for a Blue Alps board for ages and then I see that ad like it was destiny so I jump on it no hesitation.
Post by: 3Love on Thu, 26 March 2015, 13:47:12
Post by: Flyersfan1 on Thu, 26 March 2015, 13:54:39
Where is the group buy?
This needs a little more tweaking since there are a lot of options in this GB than the others. SOON! :D
:thumb:
Post by: quochung1989 on Fri, 27 March 2015, 11:11:11
(http://kbdlab.co.kr/files/attach/images/340/849/553/002/81c5ca14411535f29dcc31cec18665ea.jpg)
(http://kbdlab.co.kr/files/attach/images/340/849/553/002/5d8ea0d4770e4be814068a2034638d11.jpg)
(http://kbdlab.co.kr/files/attach/images/340/849/553/002/8c308f8cc205fc309e42a60c12b33d00.jpg)
Post by: monotagary on Fri, 27 March 2015, 12:52:04
Some photos about Acrylic plate:Show Image(http://kbdlab.co.kr/files/attach/images/340/849/553/002/81c5ca14411535f29dcc31cec18665ea.jpg)Show Image(http://kbdlab.co.kr/files/attach/images/340/849/553/002/5d8ea0d4770e4be814068a2034638d11.jpg)Show Image(http://kbdlab.co.kr/files/attach/images/340/849/553/002/8c308f8cc205fc309e42a60c12b33d00.jpg)
Wow, very flexible. :eek:
Post by: Fnzzy on Fri, 27 March 2015, 13:00:54
Some photos about Acrylic plate:Show Image(http://kbdlab.co.kr/files/attach/images/340/849/553/002/81c5ca14411535f29dcc31cec18665ea.jpg)Show Image(http://kbdlab.co.kr/files/attach/images/340/849/553/002/5d8ea0d4770e4be814068a2034638d11.jpg)Show Image(http://kbdlab.co.kr/files/attach/images/340/849/553/002/8c308f8cc205fc309e42a60c12b33d00.jpg)
Wooow, I didn't expect that. I wonder how it will feel.
Post by: slickmamba on Fri, 27 March 2015, 13:03:21
Post by: Sygaldry on Fri, 27 March 2015, 14:12:25
Some photos about Acrylic plate:Show Image(http://kbdlab.co.kr/files/attach/images/340/849/553/002/81c5ca14411535f29dcc31cec18665ea.jpg)Show Image(http://kbdlab.co.kr/files/attach/images/340/849/553/002/5d8ea0d4770e4be814068a2034638d11.jpg)Show Image(http://kbdlab.co.kr/files/attach/images/340/849/553/002/8c308f8cc205fc309e42a60c12b33d00.jpg)
Looks like that would make for a very, very nice typing feel while offering the stability of a plate :eek:
Tempted....
Post by: sethk_ on Fri, 27 March 2015, 14:14:26
Same feeling as you, this is probably one of my favorite boards, but I also really want the mira when it goes live, probably around summer. But we now have the mira, tx87, LSv2, and the Oropn V2 :-XSome photos about Acrylic plate:Show Image(http://kbdlab.co.kr/files/attach/images/340/849/553/002/81c5ca14411535f29dcc31cec18665ea.jpg)Show Image(http://kbdlab.co.kr/files/attach/images/340/849/553/002/5d8ea0d4770e4be814068a2034638d11.jpg)Show Image(http://kbdlab.co.kr/files/attach/images/340/849/553/002/8c308f8cc205fc309e42a60c12b33d00.jpg)
Looks like that would make for a very, very nice typing feel while offering the stability of a plate :eek:
Tempted....
Post by: Sygaldry on Fri, 27 March 2015, 14:16:20
Orion V2, TX87, and the Mira are the three boards I'm deliberating between to make my next acquisition =pSame feeling as you, this is probably one of my favorite boards, but I also really want the mira when it goes live, probably around summer. But we now have the mira, tx87, LSv2, and the Oropn V2 :-XSome photos about Acrylic plate:Show Image(http://kbdlab.co.kr/files/attach/images/340/849/553/002/81c5ca14411535f29dcc31cec18665ea.jpg)Show Image(http://kbdlab.co.kr/files/attach/images/340/849/553/002/5d8ea0d4770e4be814068a2034638d11.jpg)Show Image(http://kbdlab.co.kr/files/attach/images/340/849/553/002/8c308f8cc205fc309e42a60c12b33d00.jpg)
Looks like that would make for a very, very nice typing feel while offering the stability of a plate :eek:
Tempted....
Post by: sethk_ on Fri, 27 March 2015, 14:18:27
Orion because amazing design, TX because of affordability and sleekness, and mira because of US custom and cool design. Not to mention then the price of switches, springs, stickers, lubes, and clear switch tops if those are your things.Orion V2, TX87, and the Mira are the three boards I'm deliberating between to make my next acquisition =pSame feeling as you, this is probably one of my favorite boards, but I also really want the mira when it goes live, probably around summer. But we now have the mira, tx87, LSv2, and the Oropn V2 :-XSome photos about Acrylic plate:Show Image(http://kbdlab.co.kr/files/attach/images/340/849/553/002/81c5ca14411535f29dcc31cec18665ea.jpg)Show Image(http://kbdlab.co.kr/files/attach/images/340/849/553/002/5d8ea0d4770e4be814068a2034638d11.jpg)Show Image(http://kbdlab.co.kr/files/attach/images/340/849/553/002/8c308f8cc205fc309e42a60c12b33d00.jpg)
Looks like that would make for a very, very nice typing feel while offering the stability of a plate :eek:
Tempted....
Post by: Sygaldry on Fri, 27 March 2015, 14:22:12
Orion because amazing design, TX because of affordability and sleekness, and mira because of US custom and cool design. Not to mention then the price of switches, springs, stickers, lubes, and clear switch tops if those are your things.Orion V2, TX87, and the Mira are the three boards I'm deliberating between to make my next acquisition =pSame feeling as you, this is probably one of my favorite boards, but I also really want the mira when it goes live, probably around summer. But we now have the mira, tx87, LSv2, and the Oropn V2 :-XSome photos about Acrylic plate:Show Image(http://kbdlab.co.kr/files/attach/images/340/849/553/002/81c5ca14411535f29dcc31cec18665ea.jpg)Show Image(http://kbdlab.co.kr/files/attach/images/340/849/553/002/5d8ea0d4770e4be814068a2034638d11.jpg)Show Image(http://kbdlab.co.kr/files/attach/images/340/849/553/002/8c308f8cc205fc309e42a60c12b33d00.jpg)
Looks like that would make for a very, very nice typing feel while offering the stability of a plate :eek:
Tempted....
I already have enough parts for 2 customs =]
The TX1800 is already the first of the 2. Just have to decide on what board I want to put the remainder in!
Post by: animated on Fri, 27 March 2015, 14:36:28
Also the GB needs to start, I keep checking everyday :(
Post by: Fnzzy on Fri, 27 March 2015, 20:48:25
Didn't someone say the plate isn't acrylic, I think they said it was plastic.
Elton said that.
Post by: quochung1989 on Fri, 27 March 2015, 21:06:44
Didn't someone say the plate isn't acrylic, I think they said it was plastic.
Also the GB needs to start, I keep checking everyday :(
You should follow this thread & Orion V1 thread.
Post by: appleonama on Mon, 30 March 2015, 22:45:51
Post by: Cottonsox on Mon, 30 March 2015, 22:52:43
this is taking forever to go on sale
You learn patience in this game fairly quickly.
Post by: Fnzzy on Tue, 31 March 2015, 07:14:13
Post by: 3Love on Tue, 31 March 2015, 10:25:41
Post by: appleonama on Wed, 01 April 2015, 22:25:00
this is taking forever to go on sale
You learn patience in this game fairly quickly.
Patience is for nubs
Now that i own all worthy TOPRE keyboard
HHKB, type-s,rf 87u, fc600c, nova touch and 23ub
This is going to be my end game keyboard and I've been waiting for Orion v2 since the other orion GB
Post by: elton5354 on Sat, 04 April 2015, 07:19:33
http://duck0113.tistory.com/m/post/121
Post by: Fnzzy on Sat, 04 April 2015, 08:05:03
Post by: Ngt on Sat, 04 April 2015, 08:13:55
New pictures are up!Nice pictures! It is definitely looking nice. The aluminum bottom makes it look badass! Looks like robocop with the side acrylic reflection.
http://duck0113.tistory.com/m/post/121
Post by: rainb1ood on Sat, 04 April 2015, 08:27:25
Post by: elton5354 on Sat, 04 April 2015, 09:18:36
I know I should probably wait for the GB to start, but will the feet be in the same color as the top case if we order the flat acryllic bottom?
Will be offered in silver only
Post by: Fnzzy on Sat, 04 April 2015, 09:24:53
I know I should probably wait for the GB to start, but will the feet be in the same color as the top case if we order the flat acryllic bottom?
Will be offered in silver only
Thanks for the fast response. Guess I will order extra feet from GON then.
Post by: reaxas on Sat, 04 April 2015, 10:25:18
Post by: elton5354 on Sat, 04 April 2015, 10:43:38
How much for this board, by the way? I'm pretty interested in ordering but I want to know if it's in my reach first. :P
I haven't been told the price yet, but most likely between $200-$400 depending on the bottom you choose.
Post by: whentheclouds on Sat, 04 April 2015, 10:57:23
Post by: elton5354 on Sat, 04 April 2015, 12:18:20
will there be options for two tone colors like in the photos?
I don't want to speculate too much, but I'm pretty sure it will be an option since it was for V1
Post by: whentheclouds on Sat, 04 April 2015, 12:21:44
since it was for V1i wasn't too sure about this since i've never seen any two tone pictures on here (the GB happened before my time). this is reassuring to hear though
Post by: elton5354 on Sat, 04 April 2015, 12:54:57
since it was for V1i wasn't too sure about this since i've never seen any two tone pictures on here (the GB happened before my time). this is reassuring to hear though
Yeah, only 4 people from the group buy picked 2 tone cases. There wasn't much buyers to begin with
Post by: HTN47 on Sat, 04 April 2015, 16:41:45
Looks like it to me in some pictures but I'm new at this so can't really tell :))
Post by: Fnzzy on Sat, 04 April 2015, 17:49:04
Quick question guys, are these plates notched? :)
Looks like it to me in some pictures but I'm new at this so can't really tell :))
Unfortunately they do not feature switch top removal.Sadly, Duck has never released a plate with that feature.
Post by: tuantruong on Sat, 04 April 2015, 17:53:09
Post by: Lastpilot on Sat, 04 April 2015, 18:32:17
Quick question guys, are these plates notched? :)
Looks like it to me in some pictures but I'm new at this so can't really tell :))
Unfortunately they do not feature switch top removal.Sadly, Duck has never released a plate with that feature.
This is probably here nor there, but having both plates with and without top removal, I can say that a plate without the openings delivers a better typing feel.
Post by: HTN47 on Sat, 04 April 2015, 20:43:43
Quick question guys, are these plates notched? :)
Looks like it to me in some pictures but I'm new at this so can't really tell :))
Unfortunately they do not feature switch top removal.Sadly, Duck has never released a plate with that feature.
This is probably here nor there, but having both plates with and without top removal, I can say that a plate without the openings delivers a better typing feel.
Hmmm... I see :) Thanks for the info.
What are you opinions on the plastic plate vs the aluminum plate? I'm thinking about installing gateron blacks on this keyboard when I do get it, do you think I should go with the plastic plate or the aluminum plate? I imagine that since the bottoming out is more prominent when using a linear switch, a plastic plate would greatly help reduce the bottoming out force, but then the stainless steel and the aluminum plate have a stronger base thus able to carry out the resonance and you can dampen that by doing the drawer liner mod.... I think...?
This is all speculations, if someone more knowledgeable can answer my questions and concerns, that would be greatly appreciated. :D
Post by: Lastpilot on Sat, 04 April 2015, 20:54:15
Post by: Fnzzy on Sat, 04 April 2015, 21:05:25
As for the shelf liner... I have foam in my Viper which was used to secure it during shipping. I am going to remove it tomorrow and come back to you. I only have blacks in the modifiers though, so it may not be the most accurate result.
Post by: HTN47 on Sun, 05 April 2015, 00:33:35
And if you could double check that and get back to me, that would be greatly appreciated :)
Cheers! :thumb:
Post by: 3Love on Sun, 05 April 2015, 00:42:11
New pictures are up!GB next week?
http://duck0113.tistory.com/m/post/121
Post by: Novus on Sun, 05 April 2015, 01:09:45
Post by: doublin on Sun, 05 April 2015, 06:11:25
Post by: 64rky on Sun, 05 April 2015, 07:37:39
New pictures are up!
http://duck0113.tistory.com/m/post/121
Oh my! These are some nice looking boards! Do we have a general idea of price?
Post by: elton5354 on Sun, 05 April 2015, 10:07:02
New pictures are up!GB next week?
http://duck0113.tistory.com/m/post/121
Yes should be
So, will it only offer the 86 version of alu case instead of a winkeyless 84-key?
Both will be offered
New pictures are up!
http://duck0113.tistory.com/m/post/121
Oh my! These are some nice looking boards! Do we have a general idea of price?
Around 200-400 depending on options. You'll know soon enough ;)
Post by: pichu23 on Sun, 05 April 2015, 10:29:24
New pictures are up!GB next week?
http://duck0113.tistory.com/m/post/121
Yes should beSo, will it only offer the 86 version of alu case instead of a winkeyless 84-key?
Both will be offeredNew pictures are up!
http://duck0113.tistory.com/m/post/121
Oh my! These are some nice looking boards! Do we have a general idea of price?
Around 200-400 depending on options. You'll know soon enough ;)
200 ? You have my hopes up but I'm pretty sure that's the acrylic option ;)
Post by: Fnzzy on Sun, 05 April 2015, 10:57:39
As for the shelf liner... I have foam in my Viper which was used to secure it during shipping. I am going to remove it tomorrow and come back to you. I only have blacks in the modifiers though, so it may not be the most accurate result.
I don't have the chance to check today, sorry. Tomorrow, promise!
Post by: GL1TCH3D on Sun, 05 April 2015, 11:30:58
Though for me it may come down more to the color options
Edit:
But also that angle...
hmm
Post by: KatzenKinder on Sun, 05 April 2015, 12:42:51
Post by: monotagary on Sun, 05 April 2015, 13:03:18
It's so beautiful, but yeah I've never used a board angled like that before.
I love the 11 degree angle and want it so bad, but $400 is a lot of money. I don't mind the flat bottom, but the full alu bottom is so good looking. Why are choices so hard??? :'(
Post by: KatzenKinder on Sun, 05 April 2015, 13:06:51
It's so beautiful, but yeah I've never used a board angled like that before.
I love the 11 degree angle and want it so bad, but $400 is a lot of money. I don't mind the flat bottom, but the full alu bottom is so good looking. Why are choices so hard??? :'(
I'd definitely go for the transparent angled base, it's just too cool looking to pass up. I'm torn between TKL form factor and 75% lately though.
Post by: pr1me on Sun, 05 April 2015, 14:31:49
It's so beautiful, but yeah I've never used a board angled like that before.
I love the 11 degree angle and want it so bad, but $400 is a lot of money. I don't mind the flat bottom, but the full alu bottom is so good looking. Why are choices so hard??? :'(
Buy both bottom :)
Post by: IdentityNon on Sun, 05 April 2015, 14:57:43
I might have to make this my second keyboard when I get a job!
Edit:
NVM SAW THIS: http://i1.daumcdn.net/thumb/R750x0/?fname=http%3A%2F%2Fcfile8.uf.tistory.com%2Fimage%2F24018E465508207611596D
I know what I must do. Goodbye future money!
Post by: quochung1989 on Mon, 06 April 2015, 04:22:20
http://www.enjoyclick.org/forum.php?mod=viewthread&tid=9273&extra=
When is GB run on GH?
Post by: Fnzzy on Mon, 06 April 2015, 05:14:51
Quote
Optional latex shell
Interesting.
Post by: elton5354 on Mon, 06 April 2015, 09:45:27
There was GB on EC:
http://www.enjoyclick.org/forum.php?mod=viewthread&tid=9273&extra=
When is GB run on GH?
Is it a group buy running or just a info thread? I can't see much without logging in.
What is the answer to their Q&A "first team custom red dot keyboard name was not put into operation"?
I'm told to start it when Duck starts it on kbdlab
Post by: quochung1989 on Mon, 06 April 2015, 21:05:18
Sorry, my bad. This is update picture. I don't know chinese so I missed :(There was GB on EC:
http://www.enjoyclick.org/forum.php?mod=viewthread&tid=9273&extra=
When is GB run on GH?
Is it a group buy running or just a info thread? I can't see much without logging in.
What is the answer to their Q&A "first team custom red dot keyboard name was not put into operation"?
I'm told to start it when Duck starts it on kbdlab
I don't know anwser. You must be anwser when you register?
Post by: appleonama on Tue, 07 April 2015, 02:29:42
Post by: admiralvorian on Tue, 07 April 2015, 12:43:39
ugh the wait i have 600 ready to spend
oh man... gonna get the alu base AND the acrylic base and just in case I don't like the angle I'm gonna get the flat base w/feet if it's offered.
now to go sell some blood to pay for it all...
Post by: monotagary on Tue, 07 April 2015, 14:18:08
Post by: Lastpilot on Tue, 07 April 2015, 14:20:16
UGHHHHH, I don't think that I can get together the funds I need for the full alu base... At least the flat acrylic bottom is still really well priced.
Yeah, lucky for me, my inability to type on angled boards comfortably saves me money on the Orion...Even if it doesn't look as gorgeous XD
Post by: monotagary on Tue, 07 April 2015, 15:21:04
UGHHHHH, I don't think that I can get together the funds I need for the full alu base... At least the flat acrylic bottom is still really well priced.
Yeah, lucky for me, my inability to type on angled boards comfortably saves me money on the Orion...Even if it doesn't look as gorgeous XD
Haha, that is quite lucky for you indeed. I still think that this is going to be an excellent board for my blue ALPs though.
Post by: Novus on Tue, 07 April 2015, 15:50:11
Choicess choices.
Post by: monotagary on Tue, 07 April 2015, 15:57:22
The question is buy this now or wait next year for the Orion v3.
Choicess choices.
The answer is always to buy now.
Post by: KatzenKinder on Tue, 07 April 2015, 16:31:49
The question is buy this now or wait next year for the Orion v3.
Choicess choices.
The answer is always to buy now.
(https://31.media.tumblr.com/98e2792d6184bdf82b8941e1a4e30ac4/tumblr_inline_ngt1tyvoZM1t67qit.jpg)
Post by: Sygaldry on Tue, 07 April 2015, 16:41:18
UGHHHHH, I don't think that I can get together the funds I need for the full alu base... At least the flat acrylic bottom is still really well priced.waittttt prices??? where?
Post by: appleonama on Tue, 07 April 2015, 17:06:38
No prices yet just basing of the last group buy. I'm going to go all in and buy all three basesUGHHHHH, I don't think that I can get together the funds I need for the full alu base... At least the flat acrylic bottom is still really well priced.waittttt prices??? where?
Post by: Sygaldry on Tue, 07 April 2015, 17:07:42
(https://collegecandy.files.wordpress.com/2013/03/make-it-rain.jpg?w=640)No prices yet just basing of the last group buy. I'm going to go all in and buy all three basesUGHHHHH, I don't think that I can get together the funds I need for the full alu base... At least the flat acrylic bottom is still really well priced.waittttt prices??? where?
Is this you? :eek:
Post by: monotagary on Tue, 07 April 2015, 17:10:58
No prices yet just basing of the last group buy. I'm going to go all in and buy all three basesUGHHHHH, I don't think that I can get together the funds I need for the full alu base... At least the flat acrylic bottom is still really well priced.waittttt prices??? where?Show Image(https://collegecandy.files.wordpress.com/2013/03/make-it-rain.jpg?w=640)
Is this you? :eek:
(https://i.imgur.com/19zVRZJ.gif)
Post by: effectiveduck on Wed, 08 April 2015, 09:00:29
Post by: orcinus on Wed, 08 April 2015, 10:16:22
(http://i.imgur.com/NotXI8N.gif)
Post by: monotagary on Wed, 08 April 2015, 10:21:44
Oo, when? How? How much?
Price is going to be about $200 - $400 based on the case bottom chosen.
Post by: Fnzzy on Wed, 08 April 2015, 11:07:01
Quote
Is expected to open on the 15thfrom this link http://www.enjoyclick.org/forum.php?mod=viewthread&tid=9273&extra=
Therefore I am guessing it starts at the 15th? Maybe I translated / interpreted it wrong.
Post by: effectiveduck on Wed, 08 April 2015, 12:15:09
Oo, when? How? How much?
Price is going to be about $200 - $400 based on the case bottom chosen.
Do you know if there will be an option to have it assembled by GON or someone else?
Post by: elton5354 on Wed, 08 April 2015, 12:16:32
Post by: elton5354 on Wed, 08 April 2015, 12:28:00
QuoteIs expected to open on the 15thfrom this link http://www.enjoyclick.org/forum.php?mod=viewthread&tid=9273&extra=
Therefore I am guessing it starts at the 15th? Maybe I translated / interpreted it wrong.
Not sure when the Chinese are going to start theirs, but mine will start sometime this week ;)
Post by: FrostyToast on Wed, 08 April 2015, 12:32:21
You mentioned earlier that the MX stuff is mandatory to purchase.
Post by: elton5354 on Wed, 08 April 2015, 12:36:21
However ALPS users still have to cough up some more money for the plate and PCB right?
You mentioned earlier that the MX stuff is mandatory to purchase.
That is correct.
Buy 2 sets; one for MX and one for ALPs, and you'll have an extra MX PCB just in case. ;)
Post by: Fnzzy on Wed, 08 April 2015, 12:36:59
QuoteIs expected to open on the 15thfrom this link http://www.enjoyclick.org/forum.php?mod=viewthread&tid=9273&extra=
Therefore I am guessing it starts at the 15th? Maybe I translated / interpreted it wrong.
Not sure when the Chinese are going to start theirs, but mine will start sometime this week ;)
oooooooh!
Post by: monotagary on Wed, 08 April 2015, 12:41:24
QuoteIs expected to open on the 15thfrom this link http://www.enjoyclick.org/forum.php?mod=viewthread&tid=9273&extra=
Therefore I am guessing it starts at the 15th? Maybe I translated / interpreted it wrong.
Not sure when the Chinese are going to start theirs, but mine will start sometime this week ;)
oooooooh!
I am very excited about this. On the other hand, my wallet is in despair.
Post by: quochung1989 on Thu, 09 April 2015, 05:36:35
Post by: elton5354 on Thu, 09 April 2015, 08:46:05
True customs started GB on kbdlab?
Not yet. It's just a info thread. He usually puts the buy up on kbd4u.co.kr with an annoucement on kbdlab.co.kr.
Post by: Lastpilot on Thu, 09 April 2015, 09:21:42
Post by: Sygaldry on Thu, 09 April 2015, 09:34:10
Not even lying, I had a dream last night that the GB launched.It might be a premonition... maybe it starts today?!
Post by: monotagary on Thu, 09 April 2015, 09:55:22
Not even lying, I had a dream last night that the GB launched.It might be a premonition... maybe it starts today?!
Lastpilot, Aestheticist and Keyboard Oracle.
Post by: Lastpilot on Thu, 09 April 2015, 10:25:40
In my dream there were tons of options and pictures, but the best part was the status next to our names as PAID or UNPAID. I was so excited to get my status as PAID. lol. #GHlife #orionfan (https://geekhack.org/index.php?topic=54800.msg1227958#msg1227958)
Post by: Fnzzy on Thu, 09 April 2015, 13:39:21
Post by: monotagary on Thu, 09 April 2015, 14:00:47
So the Orion v2 is, so to speak, your dream keyboard. :rolleyes:
(https://s-media-cache-ak0.pinimg.com/originals/f5/89/08/f58908fbc9096bb4bb995de242433bf5.jpg)
Post by: quochung1989 on Thu, 09 April 2015, 23:19:14
Oh oh. Great to know this. Thanks :thumb:True customs started GB on kbdlab?
Not yet. It's just a info thread. He usually puts the buy up on kbd4u.co.kr with an annoucement on kbdlab.co.kr.
Post by: effectiveduck on Fri, 10 April 2015, 02:15:30
Post by: quochung1989 on Fri, 10 April 2015, 02:33:22
How are we supposed to order if the site is in korean? Will there be someone here on GH helping or...?Don't worry. Ellton 'll help us to get it like previous times.
Post by: effectiveduck on Fri, 10 April 2015, 07:28:00
Good to hear, will it all be done here or will there be a gb thread?How are we supposed to order if the site is in korean? Will there be someone here on GH helping or...?Don't worry. Ellton 'll help us to get it like previous times.
Post by: FrostyToast on Fri, 10 April 2015, 08:02:02
Good to hear, will it all be done here or will there be a gb thread?How are we supposed to order if the site is in korean? Will there be someone here on GH helping or...?Don't worry. Ellton 'll help us to get it like previous times.
Elton will start a group buy thread and it will pretty much work like any other group buy.
Post by: Data on Fri, 10 April 2015, 08:20:00
Post by: FrostyToast on Fri, 10 April 2015, 08:35:26
Elton is awesome, by the way.Elton is love.
Post by: appleonama on Fri, 10 April 2015, 18:39:04
Post by: Fnzzy on Fri, 10 April 2015, 19:17:05
Why is this taking so long!?!?!?
Because there are so many options and things need to be well organised!?!?!?
With Elton you get your stuff within 4 months. He has the fastest Group Buys :)
Post by: appleonama on Fri, 10 April 2015, 19:21:20
dammit just take my money i want all three basesWhy is this taking so long!?!?!?
Because there are so many options and things need to be well organised!?!?!?
With Elton you get your stuff within 4 months. He has the fastest Group Buys :)
i already have this all planned out
grey-blue top
alu grey bottom
acrylic bottom
flat bottom
62g stickered lubed clears
sip socket led
hyperfused gmk
Post by: Fnzzy on Fri, 10 April 2015, 19:33:36
Black 84 top
plastic plate
Flat acryllic bottom
black feet from GON
6xg Gateron Blacks (not sure if 60, 62 or 65)
SIP sockets (still need to get those from somewhere)
Sky blue or pink LED on WASD and F row (if I decide to even use LEDs)
Original Cherry WoB (got something nice in the mail ;D )
It will be pretty much a very classy looking black keyboard without many LEDs.
Post by: elton5354 on Fri, 10 April 2015, 20:00:41
Post by: Fnzzy on Fri, 10 April 2015, 20:12:15
Post by: Novus on Fri, 10 April 2015, 20:27:13
Will be up within 24 hours. SOON!
[/quote
Can you wait until next week.
I like my weekends to be peaceful and serene ^-^
Post by: Cottonsox on Fri, 10 April 2015, 20:27:51
Will be up within 24 hours. SOON!
[/quote
Can you wait until next week.
I like my weekends to be peaceful and serene ^-^
It is not like the GB will be over in 1 weekend.
Post by: GL1TCH3D on Sat, 11 April 2015, 01:54:23
dammit just take my money i want all three basesWhy is this taking so long!?!?!?
Because there are so many options and things need to be well organised!?!?!?
With Elton you get your stuff within 4 months. He has the fastest Group Buys :)
i already have this all planned out
grey-blue top
alu grey bottom
acrylic bottom
flat bottom
62g stickered lubed clears
sip socket led
hyperfused gmk
Mine would be so close to this
Only real difference would be that I'd be using the GMK Triumph adler set xD
Post by: effectiveduck on Sat, 11 April 2015, 03:08:56
Black or dark grey top and bottom
Purple side LED's for Acrylic 'puzzle' piece
White caps and scr lck LED's
62g stickered lubed blues (considering clears but I haven't used them yet)
hyperfuse gmk
Post by: Khers on Sat, 11 April 2015, 03:19:46
If I was to pull the trigger I would build it like this: silver top with black bottom, plastic plate, vintage blacks (don't have those yet though), purple caps and scroll lock leds and gmk hyperfuse.
Thinking it would look ace, but tbh I'm more of a 60% than a tkl-guy. Ideally I'd want a viper, anyone got any idea if those are going to be rerun in the near future?
Post by: ramnes on Sat, 11 April 2015, 04:57:54
- Top case: 165000KRW
- Plate: 33000KRW whatever the plate
- PCB: 46200KRW
- Bottom case: 24200 for the acrylic flat, 79200 for the acrylic CNCd, and 149000 for the alu.
Roughly, that's 230, 280 and 340€ for a full board.
Post by: Novus on Sat, 11 April 2015, 05:09:47
[attachimg=1]
Post by: appleonama on Sat, 11 April 2015, 05:21:13
dammit just take my money i want all three basesWhy is this taking so long!?!?!?
Because there are so many options and things need to be well organised!?!?!?
With Elton you get your stuff within 4 months. He has the fastest Group Buys :)
i already have this all planned out
grey-blue top
alu grey bottom
acrylic bottom
flat bottom
62g stickered lubed clears
sip socket led
hyperfused gmk
Mine would be so close to this
Only real difference would be that I'd be using the GMK Triumph adler set xD
I also bought triumph adler so expect me to use that as well
Post by: Lastpilot on Sat, 11 April 2015, 08:28:14
(http://33.media.tumblr.com/8833ac82b24ac0f4a7d6593e84032520/tumblr_mxi5ogofYy1r6alpro1_500.gif)
Post by: elton5354 on Sat, 11 April 2015, 11:12:41
I've already posted the gb thread. Awaiting mods to approve :)
Post by: rainb1ood on Sat, 11 April 2015, 11:22:12
Post by: quochung1989 on Sat, 11 April 2015, 11:37:53
I 'll lock this thread. We 'll discuss everything in GB thread.