geekhack
geekhack Marketplace => Artisan Services => Topic started by: margo baggins on Mon, 15 August 2016, 08:33:47
-
Hello everyone,
I'm back open for taking stuff if any of you UK or euro people need services.
$37.50 an hour, or £30 an hour. Let me know what you need and I'll let you know how many hours it will be.
Reflows, SMT, building keyboards, building point to point keyboards.
I won't take on any metal work\plate work or anything like that.
If pro audio is your cup of tea, I can build you a nice DAC or Headphone amp - PM me for more details. Working on a Poweramp at the moment but I haven't finished the prototype.
As ever - you can find me with [CTRL]ALT, on my imgur here http://margobaggins.imgur.com/ or on my website here www.mattartley.com
Currently the waiting list is very short,
- RS68 repair - posted back
- TX1800 for Bunny - 50% complete
- GON 60 for Bunny - 0% complete
- Nothing
-
Just fixed an RS68 for a forum user, it was completely dead. Was missing some SMT parts.
to fix:
- desoldered switches
- Changed USB port as was broken
- soldered on missing SMT caps (0402 size)
- board still didn't do anything - probed it with my meter and it was full of electricity in all the places it should have been
- Hooked up my serial interface to the isp port on the board to test the controller, which was fine - took a backup of the firmware which was GIBBERISH! corrupted firmware :)
- Soldered a couple of switches and LEDs to see if i could get into the bootloader
- Booted the board into the bootloader
- Flashed new firmware
- Flashed key map
- moved some of the SMT LED to replace some that had been broken (moved the 2 under the RS68 logo to the side positions where some were missing - you don't need 4 LED around the logo :) )
- added 2u stabs, fixed space bar stab
- Soldered it back up
- Tested
FIXED
(http://i.imgur.com/JjzOiNA.jpg)
(http://i.imgur.com/Yy3ZbMT.jpg)
-
Glad to see you back at it margo!
-
Glad to see you back at it margo!
Thanks Spam :) Still number 1, still humble :D hahaha
-
Owner of that RS68 and now a very happy bunny now that it's in working order again. First time sending something to Margo and am more than satisfied with the constant updates I was given at every step and it was back in my hands the very next day, as good as new, after I was told it was fixed and working. Nothing to fault, impeccable throughout.
Thanks again Margo :thumb:
-
Margo is the best, people. Glad to see you back in service!
-
Glad to see you back on here Mr. Baggins. :)
Still enjoying the Orion that you built for me.
Guess you might be seeing that Weaven soon enough. ;)
-
Glad to see you back on here Mr. Baggins. :)
Still enjoying the Orion that you built for me.
Guess you might be seeing that Weaven soon enough. ;)
bah I can't wait! I really want to see one of those cases and get jealous that I missed them :D
Margo is the best, people. Glad to see you back in service!
<3
-
Welcome back, margo :)
-
Welcome back, margo :)
Thanks down-under-bro :) I hope it's nice and all still yellow there :)
-
Welcome back, margo :)
Thanks down-under-bro :) I hope it's nice and all still yellow there :)
There are some elements of yellow, yes :D
And, for the record, two elements of (translucent) red and one of GiD blue on this particular HHKB.
-
Wooooo! I will be in need of your services soon dude, my Leeku 1800 needs some treatment :(