Post by: LeandreN on Thu, 29 December 2016, 16:43:27
(http://i.imgur.com/px5jsfe.jpg)
(http://i.imgur.com/JXfilrJ.png)
This is not really an interest check, as I have gathered a lot of info and I have decided how the case should be. I just wanted to keep people updated in a thread without making a GB thread yet.
This is a very limited group buy for a high profile, heavy, high quality mechanical keyboard case for 60% keyboards.
Round 1 will have 20(TBD)places available, later there will be more. The orders will be open for a short time, and I will raffle out the first places if needed.
Specifications:
Brass or steel(TBD) weight
Bead blasted anodized aluminium (alloy to be determined from samples)
5 different colours to choose from
Steep chamfered edges
Fits 60% tray mounted keyboard to make it highly compatible and sturdy.
6x M2 screws for mounting
2x M4 screws for weight mounting
4x antislide 3M feet
8 degree angle
V1:
(http://i.imgur.com/ilahrdK.jpg)
(http://i.imgur.com/oJMPBwS.jpg)
V2
(http://i.imgur.com/9QUWnUy.jpg)
(http://i.imgur.com/px5jsfe.jpg)
Pricepoint: TBD
Post by: iamtootallforthis on Thu, 29 December 2016, 16:44:30
Post by: KetchyKech on Thu, 29 December 2016, 16:49:18
Post by: LeandreN on Thu, 29 December 2016, 16:58:33
Looking good. Really like the look of the weight.
Thanks. Glad you like it.
I really like this design--hope gold or brass case color is an option! Heavier the better! :thumb:
I'll always see what can be done. Thanks for the suggestion.
Sent from my Nexus 5X using Tapatalk
Post by: Slash Emperor on Thu, 29 December 2016, 17:34:40
Sent from my LG-V20
Post by: CommonCurt on Thu, 29 December 2016, 17:36:08
Posting here so I don't forget about it.
Post by: nugglets on Thu, 29 December 2016, 17:36:41
Post by: LeandreN on Thu, 29 December 2016, 17:37:24
I really like the look of the R2 case. Having that flat top before the angled edges makes it look really, really nice IMO.That's the one we are going for, so great to hear.
Post by: LeandreN on Thu, 29 December 2016, 17:54:55
Yes, yes, yes! I have my first brass weight cases coming in soon with my TX shipment that shipped this week, so that should help me decide on what to go for with the MOUNTAIN.Great :)
Sent from my LG-V20
Post by: Vigrith on Thu, 29 December 2016, 18:09:07
Post by: polentA on Thu, 29 December 2016, 18:21:16
Post by: sems on Thu, 29 December 2016, 18:31:47
Post by: GreyAmbience on Fri, 30 December 2016, 02:52:12
Sent from my microwave oven using alternating current
Post by: LeandreN on Fri, 30 December 2016, 04:05:19
Looks beautiful, Leandren - I don't purchase parts personally as I don't have the skills nor the time to assemble my own keyboards but the case looks wonderful, truly. Amazing job!Thanks!
I would be happy to build for you if you ever need that :)
Post by: LeandreN on Fri, 30 December 2016, 04:05:51
I have been following the updates in the other group buy thread, and I am extremely excited to support this case! Will definitely watch this thread for updates. I don't have any constructive criticism unfortunately - I just love high profile 60% cases! Badass LeandreNGreat. Thanks.
Post by: LeandreN on Fri, 30 December 2016, 04:06:00
Looks absolutely stunning.Thanks :)
Sent from my microwave oven using alternating current
Post by: TalkingTree on Fri, 30 December 2016, 04:06:49
Post by: LeandreN on Fri, 30 December 2016, 04:08:00
Definetely one of the best looking 60% cases around. Did you design it yourself LeandreN?Thanks TalkingTree
Yes, I have designed it entirely myself.
Post by: TalkingTree on Fri, 30 December 2016, 04:52:06
Yes, I have designed it entirely myself.You've got some skills.
Post by: rabbitfire on Fri, 30 December 2016, 04:55:04
Post by: Marvellion on Fri, 30 December 2016, 05:39:59
Sent from my iPad using Tapatalk
Post by: Jokrik on Fri, 30 December 2016, 05:45:08
my wallet, take!
Post by: ambalek on Fri, 30 December 2016, 05:52:54
Post by: GreyAmbience on Fri, 30 December 2016, 05:59:38
I've been following you tease this on Instagram, and I really want one! The design is awesome, the polygonal feel will go nicely with something a little 80s-themed (dark gray/black with Skeletor maybe?)
I got you fam https://www.massdrop.com/talk/455/laser-gmk?referer=D3D4E9&mode=guest_open
Sent from my microwave oven using alternating current
Post by: ambalek on Fri, 30 December 2016, 06:16:48
I've been following you tease this on Instagram, and I really want one! The design is awesome, the polygonal feel will go nicely with something a little 80s-themed (dark gray/black with Skeletor maybe?)
I got you fam https://www.massdrop.com/talk/455/laser-gmk?referer=D3D4E9&mode=guest_open
That looks perfect
Post by: GreyAmbience on Fri, 30 December 2016, 06:18:47
I love the novelties on that set :DI've been following you tease this on Instagram, and I really want one! The design is awesome, the polygonal feel will go nicely with something a little 80s-themed (dark gray/black with Skeletor maybe?)
I got you fam https://www.massdrop.com/talk/455/laser-gmk?referer=D3D4E9&mode=guest_open
That looks perfect
Sent from my microwave oven using alternating current
Post by: yuktsi on Fri, 30 December 2016, 08:11:26
Post by: Vigrith on Fri, 30 December 2016, 08:37:50
Thanks!
I would be happy to build for you if you ever need that :)
You reside in Northern Europe do you not? I might actually take you up on that offer some time honestly, been meaning to get my wife a 60% for her travels but all of the mass produced ones don't interest me at all.
Post by: kmba on Fri, 30 December 2016, 08:57:12
Post by: LeandreN on Fri, 30 December 2016, 09:30:48
Yes, I do live in Norway.Thanks!
I would be happy to build for you if you ever need that :)
You reside in Northern Europe do you not? I might actually take you up on that offer some time honestly, been meaning to get my wife a 60% for her travels but all of the mass produced ones don't interest me at all.
Post by: LeandreN on Fri, 30 December 2016, 09:31:01
very interested.Great :)
Post by: Zackfoo on Fri, 30 December 2016, 09:31:44
Sent from my SM-G935F using Tapatalk
Post by: BunnyLake on Fri, 30 December 2016, 10:11:26
Post by: Gajible on Fri, 30 December 2016, 10:15:17
Post by: Rob27shred on Fri, 30 December 2016, 11:10:16
Post by: BAS1C on Fri, 30 December 2016, 11:14:37
Show Image(http://i.imgur.com/9QUWnUy.jpg)
Pricepoint: TBD
Gajible where you at?
Post by: UsualSuspectXXX on Fri, 30 December 2016, 11:18:28
Post by: LeandreN on Fri, 30 December 2016, 12:17:21
I'm gonna be very poor because of you my friend.... M...Sorry... :)
Sent from my SM-G935F using Tapatalk
Post by: LeandreN on Fri, 30 December 2016, 12:17:43
will do terrible things for this case, im in for every colour and option availableGreat to hear this from you, thanks for your support!
Post by: LeandreN on Fri, 30 December 2016, 12:18:03
Persian carpet :thumb:Best colour combo!
Post by: LeandreN on Fri, 30 December 2016, 12:18:16
This looks awesome! If purple is an option I might jump in on this and ditch my Tex case.Great :)
Post by: kmba on Fri, 30 December 2016, 15:46:40
Post by: Auxo on Fri, 30 December 2016, 15:48:56
Post by: LeandreN on Fri, 30 December 2016, 15:50:31
I assume you will be releasing V2?Yes for sure.
Post by: LeandreN on Fri, 30 December 2016, 15:51:16
super limitedGBs are the death of me :-XI just want to mess things up. There will be more GBs shortly afterwards. This is for the sake of quality.
Post by: pixelpusher on Fri, 30 December 2016, 15:55:11
Go ahead and sign us up and lock it down :p
Post by: LeandreN on Fri, 30 December 2016, 15:56:13
Welp, there's just about 20 of us who have posted so far, so I guess we get the first 20. Woohoo!Looking at the interest, I think I have to expand the orders a bit.
Go ahead and sign us up and lock it down
I'll see what I can do.
Post by: dante on Fri, 30 December 2016, 15:59:09
I wish some of the talented board makers here would make something that is as low profile as possible because that is where a void is currently unfulfilled.
Post by: pixelpusher on Fri, 30 December 2016, 16:01:08
Post by: pixelpusher on Fri, 30 December 2016, 16:02:16
Just stick some rubber feet on the bottom and get a wrist rest! ;D
Ooh, better yet... cut a reverse angle in your desktop. Boom! Flat!
Post by: Saiph on Fri, 30 December 2016, 16:06:11
As a fan of all things low profile this is like slamming my penis in a door.What kind of case were you thinking? I feel like the flat 60% cases you can buy everywhere are as low profile as you can get.
I wish some of the talented board makers here would make something that is as low profile as possible because that is where a void is currently unfulfilled.
Post by: dante on Fri, 30 December 2016, 16:07:02
Post by: Auxo on Fri, 30 December 2016, 16:35:19
I don't know how unusual it is but I prefer to type without a wrist rest. I'm not sure if there are exotic materials that will allow a maker to build a board unusually thin while still maintaining structural integrity.
You might be able to consider running a caseless/naked board? I went a few days where I just laid the bare PCB/board on my wide mouse pad and if it we're for the flat profile, it would have been more enjoyable to type on (very nice and quiet)
Post by: LeandreN on Fri, 30 December 2016, 19:00:58
Sent from my Nexus 5X using Tapatalk
Post by: duynguyenle on Fri, 30 December 2016, 20:02:32
Post by: Auxo on Fri, 30 December 2016, 21:20:19
Post by: pixelpusher on Fri, 30 December 2016, 21:25:35
Yeah, regarding the above post... is there any estimated date? I am quite literally looking for an end-game high profile 60% case to replace my tex aluminum
Well that's just nonsense. You don't need to replace the Tex case, you simply need to add to your collection :D
Post by: Zackfoo on Fri, 30 December 2016, 21:36:26
Sent from my SM-G935F using Tapatalk
Post by: UsualSuspectXXX on Fri, 30 December 2016, 22:28:13
Yeah, regarding the above post... is there any estimated date? I am quite literally looking for an end-game high profile 60% case to replace my tex aluminum
My thoughts exactly!
Post by: kmba on Fri, 30 December 2016, 23:59:27
Post by: LeandreN on Sat, 31 December 2016, 03:39:21
Yeah, regarding the above post... is there any estimated date? I am quite literally looking for an end-game high profile 60% case to replace my tex aluminum
I will be running it when it is ready. I have no estimate yet, as I need atleast 1 more prototype.
Post by: yuktsi on Sat, 31 December 2016, 04:07:56
I would love to get the first prototype if you are selling it. :pYeah, regarding the above post... is there any estimated date? I am quite literally looking for an end-game high profile 60% case to replace my tex aluminum
I will be running it when it is ready. I have no estimate yet, as I need atleast 1 more prototype.
Post by: menuhin on Sat, 31 December 2016, 06:57:32
I don't know how unusual it is but I prefer to type without a wrist rest. I'm not sure if there are exotic materials that will allow a maker to build a board unusually thin while still maintaining structural integrity.
Perhaps steel plate on steel bottom with extra brass/steel standoffs?
For me I hesitate to have the 'floating keys' / the low-profile case design because it exposes the top housings of the switches. I would gladly have a low profile case paired with some matching color switch tops and key caps; but if they don't match or it switch tops are not at all part of the plan, the exposed switch tops are just distracting and make the look inconsistent. So I prefer high-pro cases, and it is mostly for aesthetics reasons. I don't know if high-profile or low-profile can affect typing because I don't think I can bottom out a key even further with a low-pro case, though perceptually I may think otherwise.
Post by: LeandreN on Sat, 31 December 2016, 08:45:57
Trust me, you dont want the first prototype :)I would love to get the first prototype if you are selling it.Yeah, regarding the above post... is there any estimated date? I am quite literally looking for an end-game high profile 60% case to replace my tex aluminum
I will be running it when it is ready. I have no estimate yet, as I need atleast 1 more prototype.
Post by: bbmathlvr on Sat, 31 December 2016, 10:09:38
Post by: LeandreN on Sat, 31 December 2016, 11:54:51
Looks damn hefty, but not too bulky. Very nice design!Thanks. Glad people like it!
Post by: FioraCorp on Sat, 31 December 2016, 16:53:11
Looking at the interest, I think I have to expand the orders a bit.
I'll see what I can do.
Yes please :thumb: I'd love to get in too
Post by: Unforgivable on Sat, 31 December 2016, 19:31:34
Post by: gnmar2723 on Sat, 31 December 2016, 19:38:17
Post by: pixelpusher on Sat, 31 December 2016, 20:17:16
It's going to be hard to decide between the Revo HHKB case and this :p Can't wait to see more!
Both, of course. If money is the issue you just need to sell some plasma or baby batter :p
Wait... I assumed your gender. But then again, if you are a woman, funds maybe not an issue
Post by: Zackfoo on Sat, 31 December 2016, 20:21:10
That's kinda sexist..... But hey I'm not offended. XDIt's going to be hard to decide between the Revo HHKB case and thisCan't wait to see more!
Both, of course. If money is the issue you just need to sell some plasma or baby batter
Wait... I assumed your gender. But then again, if you are a woman, funds maybe not an issue
Sent from my SM-G935F using Tapatalk
Post by: Zackfoo on Sat, 31 December 2016, 20:21:43
Sent from my SM-G935F using Tapatalk
Post by: pixelpusher on Sat, 31 December 2016, 20:23:10
That's kinda sexist..... But hey I'm not offended. XDIt's going to be hard to decide between the Revo HHKB case and this
Both, of course. If money is the issue you just need to sell some plasma or baby batter
Wait... I assumed your gender. But then again, if you are a woman, funds maybe not an issue
Sent from my SM-G935F using Tapatalk
Sorry if I offended. Just being silly
Post by: Zackfoo on Sat, 31 December 2016, 20:24:28
Sent from my SM-G935F using Tapatalk
Post by: gnmar2723 on Sat, 31 December 2016, 20:57:17
Post by: Sifo on Sat, 31 December 2016, 23:02:34
Post by: Zackfoo on Sat, 31 December 2016, 23:03:12
did someone say blue or nahPowder Blue please!
Sent from my SM-G935F using Tapatalk
Post by: Unforgivable on Sun, 01 January 2017, 05:36:54
Will blocker for hhkb layout be an option to have? That will be cool.
Sent from my SM-G935F using Tapatalk
You mean like a HHKB top plate?
If so, I'm keeping my fingers crossed. I would honestly love that option.
Post by: LeandreN on Sun, 01 January 2017, 05:46:35
Will blocker for hhkb layout be an option to have? That will be cool.
Sent from my SM-G935F using Tapatalk
You mean like a HHKB top plate?
If so, I'm keeping my fingers crossed. I would honestly love that option.
That is very hard to do with a tray mount case. I would love to do it later though :)
Post by: LeandreN on Sun, 01 January 2017, 05:46:52
Another sample in!
Post by: Zackfoo on Sun, 01 January 2017, 06:26:17
Sent from my SM-G935F using Tapatalk
Post by: Sifo on Sun, 01 January 2017, 07:06:35
Post by: GreyAmbience on Sun, 01 January 2017, 07:07:56
Sent from my microwave oven using alternating current
Post by: Perfex on Sun, 01 January 2017, 10:36:57
2017 looks to be a great year for my desk, but my wallet is another story :)
Post by: LeandreN on Sun, 01 January 2017, 10:54:42
Post by: smart5088 on Sun, 01 January 2017, 11:05:48
Can I check the estimated GB price?
Post by: LeandreN on Sun, 01 January 2017, 11:06:15
interest.!
Can I check the estimated GB price?
Around 200$-
Post by: Unforgivable on Sun, 01 January 2017, 12:03:17
Show Image(http://i.imgur.com/Mv6qJrL.jpg)
Another sample in!
That looks clean! I love it!
Post by: UsualSuspectXXX on Sun, 01 January 2017, 12:46:54
Show Image(http://uploads.tapatalk-cdn.com/20170101/134ae5ad57dd503cd4df6e6efb4958b0.jpg)Show Image(http://uploads.tapatalk-cdn.com/20170101/0f1e0aed01d56b1cb2f8b4f1e7ff5895.jpg)
Looks dope AF. I like how the weight looks from the bottom too!
Post by: onmybikedrunk on Sun, 01 January 2017, 13:04:41
Wow - this is gorgeous! Great price too! F&$% me, I'm gonna be broke and divorced.interest.!
Can I check the estimated GB price?
Around 200$-
Post by: Auxo on Sun, 01 January 2017, 15:18:09
Show Image(http://i.imgur.com/Mv6qJrL.jpg)
Another sample in!
.....can...can i buy that sample :v
Post by: stillzman on Sun, 01 January 2017, 15:22:14
Post by: LeandreN on Mon, 02 January 2017, 11:19:50
very interested in this!!
Fantastic!
.....can...can i buy that sample :vShow Image(http://i.imgur.com/Mv6qJrL.jpg)
Another sample in!
Sorry, the sample is not for sale :)
Post by: LeandreN on Mon, 02 January 2017, 11:20:31
Here is another photo of the case!
Post by: Halverson on Mon, 02 January 2017, 12:04:13
Post by: LeandreN on Mon, 02 January 2017, 14:07:27
Ive been really needing an empty 60% case for awhile....such a sexy design. Consider me interested!Happy to get your approval!
Post by: LeandreN on Mon, 02 January 2017, 14:07:52
Sent from my Nexus 5X using Tapatalk
Post by: nsmechkb on Mon, 02 January 2017, 20:06:44
Post by: rabbitfire on Tue, 03 January 2017, 20:03:42
Post by: LeandreN on Wed, 04 January 2017, 07:36:10
I been talking to the factory about what tolerances I have for these cases. The prototypes were very good, with some small flaws that would go unnoticed by most people, but I still want to make these better so that we get the highest possible quality out from the situation.
We had:
Some "stripes" on the side of the case, from the machining
Scratches on the brass weight(difficult to work with in this shape)
A few of the inner corners were not machined correctly.
We have been going through these small problems, and hopefully they have improved by our next prototype. The factory is very cooperative and they delivered an amazing products aside from these very small, almost unnoticeable flaws.
Shipping:
I am prepared to pay over 700$ in shipping to get these to me after I have placed the GB order, these are super heavy cases. From me, I will set up a solution with tracked shipping for everyone.
I am also figuring out some good options to include, and extras.
Thanks for reading, hopefully we will have some excellent prototypes so we can start this GB ASAP.
Post by: Jokrik on Wed, 04 January 2017, 07:37:59
Hello!
I been talking to the factory about what tolerances I have for these cases. The prototypes were very good, with some small flaws that would go unnoticed by most people, but I still want to make these better so that we get the highest possible quality out from the situation.
We had:
Some "stripes" on the side of the case, from the machining
Scratches on the brass weight(difficult to work with in this shape)
Some of the corners were not machined correctly.
We have been going through these small problems, and hopefully they have improved by our next prototype. The factory is very cooperative and they delivered an amazing products aside from these very small, almost unnoticeable flaws.
Shipping:
I am prepared to pay over 700$ in shipping to get these to me after I have placed the GB order, these are super heavy cases. From me, I will set up a solution with tracked shipping for everyone.
I am also figuring out some good options to include, and extras.
Thanks for reading, hopefully we will have some excellent prototypes so we can start this GB ASAP.
Very interesting updates
really can't wait for the GB :), all the best for the next proto
Post by: Jedi on Wed, 04 January 2017, 09:50:19
Post by: LeandreN on Wed, 04 January 2017, 09:59:03
Throw us a weight figure on these boys. My Round5 order could sure use this when it arrives.Looks like a are going to hit the 2KG mark.
Post by: hervuli on Wed, 04 January 2017, 10:57:09
Throw us a weight figure on these boys. My Round5 order could sure use this when it arrives.Looks like a are going to hit the 2KG mark.
Wow. I was already interested, now I definitely want one! :)
Post by: LeandreN on Wed, 04 January 2017, 11:29:32
Throw us a weight figure on these boys. My Round5 order could sure use this when it arrives.Looks like a are going to hit the 2KG mark.
Wow. I was already interested, now I definitely want one! :)
Fantastic, thanks for teh feedback!
Post by: bbmathlvr on Wed, 04 January 2017, 20:36:50
Throw us a weight figure on these boys. My Round5 order could sure use this when it arrives.Looks like a are going to hit the 2KG mark.
Holy crap! I think that's a good thing, but I'm a little worried for my desk at that weight :P
Post by: Slash Emperor on Wed, 04 January 2017, 22:57:32
What is your desk made of?Throw us a weight figure on these boys. My Round5 order could sure use this when it arrives.Looks like a are going to hit the 2KG mark.
Holy crap! I think that's a good thing, but I'm a little worried for my desk at that weight
Post by: Saiph on Wed, 04 January 2017, 23:01:02
Origami, is that not normal?
What is your desk made of?
Post by: Halverson on Thu, 05 January 2017, 00:25:29
Post by: LeandreN on Thu, 05 January 2017, 00:49:16
I don't know if it's been mentioned, have the colors been determined?
Not yet, still trying some different options to see what will fit best as options.
Post by: Halverson on Thu, 05 January 2017, 00:50:41
I don't know if it's been mentioned, have the colors been determined?
Not yet, still trying some different options to see what will fit best as options.
Ok great, looking forward to see what you choose :)
Post by: exanile_tabasco on Thu, 05 January 2017, 02:47:22
Posting so I won't forget about this. I love what you've done with the centre screw post; most weighted hipros don't have it due to the position of the weight.
Sent from my iPhone using Tapatalk
Post by: E3E on Thu, 05 January 2017, 07:19:41
Post by: KHAANNN on Thu, 05 January 2017, 07:31:04
Like everyone points out, it's an incredible product, would want to join If I can still type while my palm is on the desk
Post by: exanile_tabasco on Thu, 05 January 2017, 14:56:25
I wonder how much higher are the bottom row keycaps compared to an 60% with a TEX case
Like everyone points out, it's an incredible product, would want to join If I can still type while my palm is on the desk
If you want to live the hipro life, you should probably have either a wrist rest or good posture (wrist suspended while typing). Otherwise it's going to hurt. If it's anything like FMJ or Hammer, bottom row (assuming regular R4 Cherry mods, not R5) will be a few mm higher than in a Tex case.
By the way @Leandren, I'm a little concerned now about the corners. If they're really rounded, is there any chance that the corners of bottom row Cherry caps will rub against the case? Have had this issue with some other hipro cases. I see that you like Skidata a lot so perhaps you could test it out for us GMK users? To me it looks like V2 is going to be tight around the edges, and V1 has a little more wiggle room for the board.
Post by: LeandreN on Thu, 05 January 2017, 14:58:44
Yeah it is true. It doesn't scratch at the normal position now, but it is awfully close. We will reduce the roundness by .5mm to make sure.I wonder how much higher are the bottom row keycaps compared to an 60% with a TEX case
Like everyone points out, it's an incredible product, would want to join If I can still type while my palm is on the desk
If you want to live the hipro life, you should probably have either a wrist rest or good posture (wrist suspended while typing). Otherwise it's going to hurt. If it's anything like FMJ or Hammer, bottom row (assuming regular R4 Cherry mods, not R5) will be a few mm higher than in a Tex case.
By the way @Leandren, I'm a little concerned now about the corners. If they're really rounded, is there any chance that the corners of bottom row Cherry caps will rub against the case? Have had this issue with some other hipro cases. I see that you like Skidata a lot so perhaps you could test it out for us GMK users? To me it looks like V2 is going to be tight around the edges, and V1 has a little more wiggle room for the board.
Post by: bbmathlvr on Fri, 06 January 2017, 22:17:49
What is your desk made of?Throw us a weight figure on these boys. My Round5 order could sure use this when it arrives.Looks like a are going to hit the 2KG mark.
Holy crap! I think that's a good thing, but I'm a little worried for my desk at that weight
It's solid cherry.
Post by: ArchDill on Fri, 06 January 2017, 22:25:17
Post by: alveeno on Fri, 06 January 2017, 23:32:15
Post by: LeandreN on Sat, 07 January 2017, 03:53:03
So no hhkb blockers?
I need the gray case for GMK Terminal.
That is impossible with this design, sorry.
Post by: LeandreN on Sat, 07 January 2017, 03:53:31
I need the gray case for GMK Terminal.
Me too!
Post by: GreyAmbience on Sat, 07 January 2017, 04:12:56
Soon™?I need the gray case for GMK Terminal.
Me too!
Sent from my microwave oven using alternating current
Post by: rabbitfire on Sat, 07 January 2017, 04:46:42
Post by: LDobler on Sat, 07 January 2017, 04:49:33
Will we have the option to order a PCB with the case when the GB is live?
Also, good work Leandren! :thumb:
Post by: menuhin on Sat, 07 January 2017, 05:29:44
So no hhkb blockers?I need the gray case for GMK Terminal.
That is impossible with this design, sorry.
I always wonder if any maker creates switch blockers (like those sold on Pimpmykeyboard) but in aluminum. As a separate kit, two 1.5u aluminium switch blockers (with matching height and color) at the corner can kind of transform a high profile 60% case to a HHKB style case.
Post by: venjiang on Sat, 07 January 2017, 08:50:47
从我的 iPhone 发送，使用 Tapatalk
Post by: xondat on Sat, 07 January 2017, 09:05:19
I always wonder if any maker creates switch blockers (like those sold on Pimpmykeyboard) but in aluminum. As a separate kit, two 1.5u aluminium switch blockers (with matching height and color) at the corner can kind of transform a high profile 60% case to a HHKB style case.It's been done before, but there is a problem. It looks wank.
(http://i.imgur.com/UdfYWPq.png)
Post by: menuhin on Sat, 07 January 2017, 09:32:57
I always wonder if any maker creates switch blockers (like those sold on Pimpmykeyboard) but in aluminum. As a separate kit, two 1.5u aluminium switch blockers (with matching height and color) at the corner can kind of transform a high profile 60% case to a HHKB style case.It's been done before, but there is a problem. It looks wank.Show Image(http://i.imgur.com/UdfYWPq.png)
It doesn't look good when there are too many of them on a board.
I am suggesting two things:
- As I read from a few TaoBao listings that their alu blockers are screwed into the PCB, unlike those Pimpmykeyboard blockers where one can just snap them in. Snap-in blockers will be better.
- A pair of 1.5u blockers and a pair of 1u blockers can turn a 60% into the HHKB style and the Winkeyles style in a few second and it doesn't look half bad:
(http://i.imgur.com/Aai81.jpg)
(https://i.ytimg.com/vi/7faAcDTwMrE/maxresdefault.jpg)
Of course these low cost addons are not as elegant as running another Groupbuy and spending another few hundred dollars on a specialized HHKB case and then also on a Winkeyless case.
(I know that LeandreN offers Winkeyless plate option and HHKB plate option)
Post by: LeandreN on Sat, 07 January 2017, 09:53:07
Post by: Jokrik on Sat, 07 January 2017, 10:23:31
Show Image(http://i.imgur.com/pT5CjK0.gif)
pls stop
my life feels miserable without one
Post by: ArchDill on Sat, 07 January 2017, 10:40:15
Show Image(http://i.imgur.com/pT5CjK0.gif)
NNNEEEEEDDD IIITTTTT!!!!
Post by: kmba on Sat, 07 January 2017, 13:12:46
Quote from: menuhin
Show Image(http://i.imgur.com/Aai81.jpg)
What case is that?
Post by: kmba on Sat, 07 January 2017, 13:16:14
I need the gray case for GMK Terminal.
Me too!
I think the problem with trying to match a gray case with gray keycap sets is the grays will never be the same color unless manufactured to match. I think two dark grays together, but different shades, is a little silly looking :p That's why I'm putting terminal on a board with a black case! heh.
Based on your color option renders above.. I miiiight try to get in for a blue case, but I'll probably wuss out and go with silver.
Post by: LeandreN on Sat, 07 January 2017, 16:32:14
Here you can test different combinations.
The colours are a bit off in the renders, hope to fix that soon, but you should get a general idea.
Post by: exanile_tabasco on Sat, 07 January 2017, 16:43:25
https://mekanisk.co/products/fjell?variant=36234901255
Here you can test different combinations.
The colours are a bit off in the renders, hope to fix that soon, but you should get a general idea.
Cool idea putting in renders for both the brass and steel weights :thumb:
But what is this at the top? It only shows on the Fjell page. I thought you said it wouldn't start until R5 ended?
[attach=1]
Also, the "Enter the raffle" button on the Project C page has been broken for some time because the link is the page itself.
EDIT: something to do with the products page. Once you go on the products page, the banner disappears. I feel like an idiot for getting all worried.
Post by: LeandreN on Sat, 07 January 2017, 16:50:13
It's purposely broken. It's just an old site, I will update it.https://mekanisk.co/products/fjell?variant=36234901255
Here you can test different combinations.
The colours are a bit off in the renders, hope to fix that soon, but you should get a general idea.
Cool idea putting in renders for both the brass and steel weights :thumb:
But what is this at the top? It only shows on the Fjell page. I thought you said it wouldn't start until R5 ended?
(Attachment Link)
Also, the "Enter the raffle" button on the Project C page has been broken for some time because the link is the page itself.
EDIT: something to do with the products page. Once you go on the products page, the banner disappears. I feel like an idiot for getting all worried.
I will not start before I have a 100% plan for R5. So that will be posted to R5 thread first.
We are waiting for a package over there.
Post by: UsualSuspectXXX on Sat, 07 January 2017, 16:52:25
https://mekanisk.co/products/fjell?variant=36234901255
Here you can test different combinations.
The colours are a bit off in the renders, hope to fix that soon, but you should get a general idea.
Colors look great. When you do the GB will you also have plates of matching colors available?
Post by: LeandreN on Sat, 07 January 2017, 16:54:59
I need to clear things ups in that regard, but I might offer that, or/also brass plateshttps://mekanisk.co/products/fjell?variant=36234901255
Here you can test different combinations.
The colours are a bit off in the renders, hope to fix that soon, but you should get a general idea.
Colors look great. When you do the GB will you also have plates of matching colors available?
Post by: Halverson on Sat, 07 January 2017, 17:00:45
Post by: UsualSuspectXXX on Sat, 07 January 2017, 17:12:35
I need to clear things ups in that regard, but I might offer that, or/also brass plateshttps://mekanisk.co/products/fjell?variant=36234901255
Here you can test different combinations.
The colours are a bit off in the renders, hope to fix that soon, but you should get a general idea.
Colors look great. When you do the GB will you also have plates of matching colors available?
The reason I ask is because I'd like to redo my purple build, so I'd like to get a purple plate to go along with the case.
Post by: LeandreN on Sat, 07 January 2017, 17:17:10
I need to clear things ups in that regard, but I might offer that, or/also brass plateshttps://mekanisk.co/products/fjell?variant=36234901255
Here you can test different combinations.
The colours are a bit off in the renders, hope to fix that soon, but you should get a general idea.
Colors look great. When you do the GB will you also have plates of matching colors available?
The reason I ask is because I'd like to redo my purple build, so I'd like to get a purple plate to go along with the case.
That is totally understandable. I will try my best to get it available.
Post by: IneffableTao on Sat, 07 January 2017, 18:49:32
I need to clear things ups in that regard, but I might offer that, or/also brass plates
+1 for brass plate <3
Post by: UsualSuspectXXX on Sat, 07 January 2017, 20:23:07
I need to clear things ups in that regard, but I might offer that, or/also brass plateshttps://mekanisk.co/products/fjell?variant=36234901255
Here you can test different combinations.
The colours are a bit off in the renders, hope to fix that soon, but you should get a general idea.
Colors look great. When you do the GB will you also have plates of matching colors available?
The reason I ask is because I'd like to redo my purple build, so I'd like to get a purple plate to go along with the case.
That is totally understandable. I will try my best to get it available.
Thank you. Also, the purple with the brass weight looks dope!
Post by: ticktwo on Sun, 08 January 2017, 01:52:25
Sent from my SM-G935F using Tapatalk
Post by: ehmlis on Sun, 08 January 2017, 11:58:33
I need to clear things ups in that regard, but I might offer that, or/also brass plates
+1 for brass plate <3
Ooh, a matching brass plate! I would love that. +1
Post by: LeandreN on Sun, 08 January 2017, 12:45:34
I need to clear things ups in that regard, but I might offer that, or/also brass plates
+1 for brass plate <3
Ooh, a matching brass plate! I would love that. +1
First post? Welcome to Geekhack!
Post by: ehmlis on Sun, 08 January 2017, 13:12:43
Will the silver case be so light in colour that it's almost white? I mean with the name and all, a snowclad "fjell" would be beautiful.
Post by: LeandreN on Sun, 08 January 2017, 13:13:31
GB thread live
Post by: LeandreN on Sun, 08 January 2017, 13:16:43
Thank you. I'm a long time non-registered lurker though :) (Also, I'm oknytt on DT.)
Will the silver case be so light in colour that it's almost white? I mean with the name and all, a snowclad "fjell" would be beautiful.
Unfortunately it is not white, just silver. I hope to get some sample pics next week.
Post by: exanile_tabasco on Sun, 08 January 2017, 13:19:53
Thank you. I'm a long time non-registered lurker though :) (Also, I'm oknytt on DT.)
Will the silver case be so light in colour that it's almost white? I mean with the name and all, a snowclad "fjell" would be beautiful.
Unfortunately it is not white, just silver. I hope to get some sample pics next week.
OMGOMGOMGOMG FINALLY
Post by: ArchDill on Sun, 08 January 2017, 17:54:19
This may be a stupid question but this is compatible with the Zeal PCB right?
Post by: LeandreN on Sun, 08 January 2017, 17:55:10
ENTERED. Really hoping to get in on this!I haven't tested it, but I can try to acquire one to test.
This may be a stupid question but this is compatible with the Zeal PCB right?
Should work.
Post by: jgodinez302 on Wed, 18 January 2017, 17:07:47
Thank you. I'm a long time non-registered lurker though :) (Also, I'm oknytt on DT.)
Will the silver case be so light in colour that it's almost white? I mean with the name and all, a snowclad "fjell" would be beautiful.
Unfortunately it is not white, just silver. I hope to get some sample pics next week.
I love the purple, but a white option would take the cake for me ;)
Post by: UsualSuspectXXX on Wed, 18 January 2017, 18:03:16
Thank you. I'm a long time non-registered lurker though :) (Also, I'm oknytt on DT.)
Will the silver case be so light in colour that it's almost white? I mean with the name and all, a snowclad "fjell" would be beautiful.
Unfortunately it is not white, just silver. I hope to get some sample pics next week.
I love the purple, but a white option would take the cake for me ;)
Unfortunately there is no way to do a white anodize.
Here is an explanation as to why (http://www.bluebuddhaboutique.com/blog/2011/09/no-white-anodized-aluminum/)
Related GH thread (https://geekhack.org/index.php?topic=45117.0)
Post by: polentA on Wed, 18 January 2017, 18:11:45
Thank you. I'm a long time non-registered lurker though :) (Also, I'm oknytt on DT.)
Will the silver case be so light in colour that it's almost white? I mean with the name and all, a snowclad "fjell" would be beautiful.
Unfortunately it is not white, just silver. I hope to get some sample pics next week.
I love the purple, but a white option would take the cake for me ;)
Unfortunately there is no way to do a white anodize.
Here is an explanation as to why (http://www.bluebuddhaboutique.com/blog/2011/09/no-white-anodized-aluminum/)
Related GH thread (https://geekhack.org/index.php?topic=45117.0)
I thought this was the case. Thanks for providing the explanation.
Post by: UsualSuspectXXX on Wed, 18 January 2017, 18:18:32
Thank you. I'm a long time non-registered lurker though :) (Also, I'm oknytt on DT.)
Will the silver case be so light in colour that it's almost white? I mean with the name and all, a snowclad "fjell" would be beautiful.
Unfortunately it is not white, just silver. I hope to get some sample pics next week.
I love the purple, but a white option would take the cake for me ;)
Unfortunately there is no way to do a white anodize.
Here is an explanation as to why (http://www.bluebuddhaboutique.com/blog/2011/09/no-white-anodized-aluminum/)
Related GH thread (https://geekhack.org/index.php?topic=45117.0)
I thought this was the case. Thanks for providing the explanation.
NP. The only really good way to get white would be to powder coat, which we usually don't see in this hobby.
Post by: E3E on Wed, 18 January 2017, 18:36:07
NP. The only really good way to get white would be to powder coat, which we usually don't see in this hobby.
Either that or cerakoting, eh? I know there's an example that henz has of the Novatouch aluminum case that's white. I personally would rather anodizing anyway, especially on something with as many sharp edges as the FJELL, since those are usually weak points for paints.
Post by: riotonthebay on Wed, 18 January 2017, 18:38:29
Post by: UsualSuspectXXX on Wed, 18 January 2017, 21:38:36
NP. The only really good way to get white would be to powder coat, which we usually don't see in this hobby.
Either that or cerakoting, eh? I know there's an example that henz has of the Novatouch aluminum case that's white. I personally would rather anodizing anyway, especially on something with as many sharp edges as the FJELL, since those are usually weak points for paints.
Powder coat holds up on edges better than paint dies. But yea, anodizing will always be a better, longer lasting finish process.
Post by: jgodinez302 on Thu, 19 January 2017, 09:57:25
NP. The only really good way to get white would be to powder coat, which we usually don't see in this hobby.
Either that or cerakoting, eh? I know there's an example that henz has of the Novatouch aluminum case that's white. I personally would rather anodizing anyway, especially on something with as many sharp edges as the FJELL, since those are usually weak points for paints.
Powder coat holds up on edges better than paint dies. But yea, anodizing will always be a better, longer lasting finish process.
TIL! Thanks for those helpful links :)
Post by: yuktsi on Thu, 19 January 2017, 10:12:44
Post by: jgodinez302 on Thu, 19 January 2017, 10:23:01
Are the invoices out already? :-*
I believe selections have been made and invoices should be going out in February sometime after Chinese New Year? But don't quote me on that......
Post by: LeandreN on Thu, 19 January 2017, 10:39:01
Are the invoices out already? :-*
I believe selections have been made and invoices should be going out in February sometime after Chinese New Year? But don't quote me on that......
This is true.
Post by: fublamchu on Thu, 19 January 2017, 10:50:42
Are the invoices out already? :-*
I believe selections have been made and invoices should be going out in February sometime after Chinese New Year? But don't quote me on that......
This is true.
This first invoice is just the deposit correct?
Post by: LeandreN on Thu, 19 January 2017, 11:10:09
Yes.Are the invoices out already? :-*
I believe selections have been made and invoices should be going out in February sometime after Chinese New Year? But don't quote me on that......
This is true.
This first invoice is just the deposit correct?
Post by: pixelpusher on Thu, 19 January 2017, 16:28:10
Translation: I'll buy your spot if you don't have the dough.
Post by: LeandreN on Thu, 19 January 2017, 16:29:34
Sent from my Nexus 5X using Tapatalk
Post by: alienman82 on Thu, 19 January 2017, 16:52:39