geekhack

geekhack Marketplace => Group Buys and Preorders => Topic started by: hineybush on Wed, 17 June 2020, 22:07:24

Title: [GB] hiney tkl one
Post by: hineybush on Wed, 17 June 2020, 22:07:24
welcome to the first public round of the tkl one.


TKL ONE ENTRY FORM https://form.jotform.com/201558305114042


NUM ONE ENTRY FORM https://form.jotform.com/201695631822153




Here is the interest check thread: https://geekhack.org/index.php?topic=104750.0

The group buy spots will be based on a raffle. There will be two 10-minute-long time periods for entry. These time periods will be spaced 10 hours apart to ensure that people from all over the world may enter. Please only enter during one of the time slots, as all entries will be lumped together for the raffle process.

Date: June 21, 2020
Entry Period 1: 10:00 AM-10:10 AM EDT - Check your local time here: https://everytimezone.com/s/4bfaeeae
Entry Period 2: 8:00 PM-8:10 PM EDT - Check your local time here: https://everytimezone.com/s/ac5b9afb

Expected ship date: 4-6 months upon payment period completion. Perhaps sooner due to the lower volume.

Entries

This raffle will be limited to one entry per household. If you enter multiple times I reserve the right to disqualify you from this buy, as well as all future hiney product runs. Any attempt to circumvent this rule will result in the same thing, and I will be really annoyed so please just don't. Entries will be gathered by Jotform. It will collect all relevant info. If you are worried about using a proxy, I will cross reference IP+email+address+etc to try and verify each individual.

It is highly recommended to enter with your actual address, not a proxy address. The entry form has nothing to do with shipping (see the shipping section below), so it will make it easier for everyone to use your correct address.

Communication

Please use an email address that you use regularly for communication, as I will be sending winner notifications and Shopify invoices as well as updates and news to it.

Number of Slots

There are 45 slots to be raffled off. What you enter in the form should reflect what you desire in the end. Once winners are notified and invoices are sent out, I will allow a 24-hour grace period to adjust/change/drop out. All communications to change your order must be made via email at contact@hineybush.com .

Editing your order and Payment

I will allow 72 hours for payment completion (if you need more time please email me at contact@hineybush.com and we can work it out). If you don't email me to work it out and haven't paid within 72 hours of getting your invoice, the invoice will be cancelled and the next person on the winners' list will get your spot instead.

Shipping

Shipping invoices will be calculated and sent at the time of shipment and no shipping costs will be included in the initial invoice. Please make sure you include a regularly-used email address in your entry form, as said above. All domestic, US-based addresses will be shipped via USPS Priority Mail. All international orders will be shipped via DHL Express. The customer will be responsible for all shipping costs, including import fees.

Colors/Layouts

The color options will be gold and black. I will offer both WKL and winkey top variants.

Pricing

$505 USD for one (1) case + one (1) PCB. You will be required to choose one plate (options below) and will have an option to purchase one additional plate. There will also be an opportunity to order extra h87c-hsp PCBs. I will have the extra plates/PCBs up after the buy ships.

Suggested flip price $550 USD

Plate options

 - FR4 Full - matte black (+$25)
 - FR4 Half - matte black (+$25)
 - Brass Full - clear coated (+$35)
 - Aluminum Full - black anodized (+$35)
 - Polycarbonate Full - clear coated (+$35)
 - FR4 - Full - Alps - WKL/Tsangan - matte black (+$25)

Extra PCBs will be $48 USD each.

num one info

There is an option to also add a num one (offered in the same colors as tkl one) to your order. If you say you want one you will be led to that form within the tkl one form, if not you will skip that section. I will also post a separate GB form for those interested in only the num one. Keep in mind that the num one will only be offered in gold and black, just like the tkl one.

num one pricing

$175 (case + 1 PCB + 1 plate). Plate options are FR4 and Aluminum. Extra plates are $20 and extra PCBs are $25.

There will be a maximum of 60 num one slots given, including those who win the opportunity to buy them via raffle - so basically, if there are X tkl one winners who want a num one, 60-X slots will be available from the dedicated num one raffle.

Payment Specific to PayPal

Please note that my storefront does not accept PayPal due to their very annoying refund policy as well as their anti-group buy stance on funds release. If you secure a spot and MUST use PayPal, please contact me via email (contact@hineybush.com) and we will work it out. I would much prefer that you can find an alternative means of payment that doesn't involve PayPal.

Some pics

(https://live.staticflickr.com/65535/50010384511_29a631a973_k.jpg)

(https://live.staticflickr.com/65535/50009851458_1dfb14525c_k.jpg)

(https://live.staticflickr.com/65535/50010644907_152026bb9d_k.jpg)

(https://live.staticflickr.com/65535/50009851998_82a0065dfb_k.jpg)

(https://live.staticflickr.com/65535/49923350911_d86ae4a3d0_k.jpg)

(https://live.staticflickr.com/65535/49923350731_e7a1f5e16f_k.jpg)

(https://live.staticflickr.com/65535/49842338987_38eacc4680_k.jpg)

(https://live.staticflickr.com/65535/49960282607_cf5f45332a_k.jpg)
the lilac will be in a future public round.. maybe for another keyboard first...

(https://live.staticflickr.com/65535/49563497048_86da7b82c2_k.jpg)

Note: the final gold color may vary slightly compared to my prototype. This is the end goal however it will be within 95% accuracy to this.

Here is the VOD to one of my proto builds. I do a bit of a sound comparison at the end featuring the brass-plate version (MX Blacks) and FR4 (Gat Inks) as well as other builds I have:

Other design considerations

-6 degree angle

-a.87 layout - h87a reference

-brass interior weight, stainless exterior

-USB Type C port

-burger mount optional ofc

-jane v2/koala/whale plate mount locations - these plates can be used

-Torx screws will be used - for the case/plate screws a T6 driver/bit is required. I recommend Wiha (1 (https://www.kctoolco.com/wiha-26706-t6-x-40mm-precision-torx-screwdriver/), 2 (https://www.kctoolco.com/wiha-36266-t6-x-60mm-torx-softfinish-driver/)), Wera (1 (https://www.kctoolco.com/wera-028001-t6-x-60mm-kraftform-plus-torx-screwdriver/)) or Felo (1 (https://www.kctoolco.com/felo-17046-t6-x-60mm-torx-screwdriver/)) drivers. The hardware is 18-8 stainless steel. Use cheap or crappy off brand torx drivers at your own risk. If you can afford a $500 keyboard, you can afford a $6 screwdriver. Also the weigh screws need a T10 drive end.

-I will be doing the non-ribbed-for-pleasure interior, as I don't believe there is a difference to warrant the increased cost of production.


Please keep up with the buy here, as well as on my other social medias:

discord.hiney.cc (http://discord.hiney.cc)
ig.hiney.cc (http://ig.hiney.cc)

thanks.
Title: Re: [GB] hiney tkl one
Post by: hineybush on Wed, 17 June 2020, 22:07:54
Updates

June 22, 2020 - All winners invoiced, all losers notified. Some notification emails haven't gone through it seems. If anyone wants to know for sure, shoot me your email in a PM, via email or via discord and I can verify for you.

Title: Re: [GB] hiney tkl one
Post by: zian_ on Thu, 18 June 2020, 14:22:38
Crossing fingers.
Title: Re: [GB] hiney tkl one
Post by: onmybikedrunk on Thu, 18 June 2020, 14:24:29
**Bows to the RNG gods**
Title: Re: [GB] hiney tkl one
Post by: noricon on Thu, 18 June 2020, 14:27:27
pray to the gods.
Title: Re: [GB] hiney tkl one
Post by: Alessio01 on Thu, 18 June 2020, 14:29:52
glwgb! and good luck to all of those entering  :thumb:

I will be waiting patiently for that sweet sweet lilac in a future round.
Title: Re: [GB] hiney tkl one
Post by: bthezebra on Thu, 18 June 2020, 14:31:15
All up on this Hiney
Title: Re: [GB] hiney tkl one
Post by: hineybush on Thu, 18 June 2020, 14:31:50
glwgb! and good luck to all of those entering  :thumb:

I will be waiting patiently for that sweet sweet lilac in a future round.

The next round (hopefully in 3-4 months, around when this one ships?) will include lilac for sure. I'm not sure about the other color yet, I may put that to a vote.
Title: Re: [GB] hiney tkl one
Post by: Tonkatonk on Thu, 18 June 2020, 14:32:55
What a beautiful tkl+numpad combo

Title: Re: [GB] hiney tkl one
Post by: Midori on Thu, 18 June 2020, 14:33:49
litty titty
Title: Re: [GB] hiney tkl one
Post by: cdhoffmann on Thu, 18 June 2020, 14:34:39
Let's go! GLWB and good luck everyone.
Title: Re: [GB] hiney tkl one
Post by: SirShakes on Thu, 18 June 2020, 14:34:56
Wtb
Title: Re: [GB] hiney tkl one
Post by: killuchen on Thu, 18 June 2020, 14:46:40
GL all! That lilac is gorgeous!
Title: Re: [GB] hiney tkl one
Post by: duckboi on Thu, 18 June 2020, 14:57:59
o yes
Title: Re: [GB] hiney tkl one
Post by: steezkeez on Thu, 18 June 2020, 16:55:02
saving monies for a stab at the next round, gl all
Title: Re: [GB] hiney tkl one
Post by: o3okevin on Thu, 18 June 2020, 16:55:13
let's gooo
Title: Re: [GB] hiney tkl one
Post by: roostrc0gburn on Thu, 18 June 2020, 16:58:32
nice work hiney, but what does this mean:
Quote
brass interior weight, stainless exterior
Title: Re: [GB] hiney tkl one
Post by: zekkin on Thu, 18 June 2020, 17:07:00
nice work hiney, but what does this mean:
Quote
brass interior weight, stainless exterior

check out the vod -- the weight is two pieces
Title: Re: [GB] hiney tkl one
Post by: Arithmetics on Thu, 18 June 2020, 17:12:43
i SUPPOSE!!
Title: Re: [GB] hiney tkl one
Post by: Nigolski on Thu, 18 June 2020, 18:33:56
damn.
Title: Re: [GB] hiney tkl one
Post by: bisoromi on Thu, 18 June 2020, 19:28:26
glwgb!!! first page gang!!!!
Title: Re: [GB] hiney tkl one
Post by: Zach on Thu, 18 June 2020, 19:35:32
Oo gl everyone  :]
Title: Re: [GB] hiney tkl one
Post by: teaayy on Thu, 18 June 2020, 19:37:41
Beautiful board, let’s go for gold


Sent from my iPhone using Tapatalk
Title: Re: [GB] hiney tkl one
Post by: kiyoboardasmr on Thu, 18 June 2020, 19:54:14
In for gold
Title: Re: [GB] hiney tkl one
Post by: jayiskuhl on Thu, 18 June 2020, 19:59:14
Good luck everyone!

I am feeling the gold as well.
Title: Re: [GB] hiney tkl one
Post by: Puddsy on Thu, 18 June 2020, 20:14:09
PogU
Title: Re: [GB] hiney tkl one
Post by: Remsky on Thu, 18 June 2020, 21:45:44
light gold 2020
Title: Re: [GB] hiney tkl one
Post by: mrpetrov on Thu, 18 June 2020, 22:25:16
Outstanding!

Hiney - what is your personal preference for plate(s) with this board?
Title: Re: [GB] hiney tkl one
Post by: Spicemaster on Thu, 18 June 2020, 22:42:59
Might need my dad to enter this instead of me to get the Father's Day good luck bonus
Title: Re: [GB] hiney tkl one
Post by: hineybush on Thu, 18 June 2020, 22:49:07
Outstanding!

Hiney - what is your personal preference for plate(s) with this board?

i am FR4 gang

however brass is lovely (typing on it now). I haven't done alu or pc, but those are both obviously good as well.
Title: Re: [GB] hiney tkl one
Post by: mrpetrov on Thu, 18 June 2020, 22:54:21
Outstanding!

Hiney - what is your personal preference for plate(s) with this board?

i am FR4 gang

however brass is lovely (typing on it now). I haven't done alu or pc, but those are both obviously good as well.

Full or half plate fr4 for you?
Title: Re: [GB] hiney tkl one
Post by: hineybush on Thu, 18 June 2020, 22:56:13
Outstanding!

Hiney - what is your personal preference for plate(s) with this board?

i am FR4 gang

however brass is lovely (typing on it now). I haven't done alu or pc, but those are both obviously good as well.

Full or half plate fr4 for you?

sorta prefer full, however half is its' own experience with the reverb
Title: Re: [GB] hiney tkl one
Post by: tul on Fri, 19 June 2020, 02:23:45
All the plates will be ansi only? no iso option?
Title: Re: [GB] hiney tkl one
Post by: hottrout on Fri, 19 June 2020, 02:37:41
I am ready for the gold.
Title: Re: [GB] hiney tkl one
Post by: ramnes on Fri, 19 June 2020, 04:26:11
I really really want this
Title: Re: [GB] hiney tkl one
Post by: tomu on Fri, 19 June 2020, 04:45:09
yum

Sent from my SM-G965U using Tapatalk

Title: Re: [GB] hiney tkl one
Post by: gok101 on Fri, 19 June 2020, 04:49:09
that champagne is hot
Title: Re: [GB] hiney tkl one
Post by: Quinella on Fri, 19 June 2020, 04:52:34
GL ALL  :thumb:
Title: Re: [GB] hiney tkl one
Post by: blitz on Fri, 19 June 2020, 11:19:45
Lol, I love the “Suggested Flip Price”.
Glws Hiney!
Title: Re: [GB] hiney tkl one
Post by: mcRewind on Fri, 19 June 2020, 12:10:15
"not for resale" pog

Looking forward to the raffle in a couple days. Thanks for this project hiney!
Title: Re: [GB] hiney tkl one
Post by: montereysamuel on Fri, 19 June 2020, 12:24:21
Hey Hiney - will you also release plate files for the Num One after initial group buy?
Title: Re: [GB] hiney tkl one
Post by: hineybush on Fri, 19 June 2020, 12:31:24
Hey Hiney - will you also release plate files for the Num One after initial group buy?

yeah sure I can!
Title: Re: [GB] hiney tkl one
Post by: MonsterM on Fri, 19 June 2020, 18:56:12
Nice!
Title: Re: [GB] hiney tkl one
Post by: hkhawk on Fri, 19 June 2020, 19:15:21
Lol, I love the “Suggested Flip Price”.
Glws Hiney!

Bwahaha, I just saw that!
Title: Re: [GB] hiney tkl one
Post by: hottrout on Sat, 20 June 2020, 03:18:12
Is there an ISO plate option with it?
Title: Re: [GB] hiney tkl one
Post by: tommyhongg on Sat, 20 June 2020, 07:36:55
I love Hineybush and Hineybush keyboards.
Title: Re: [GB] hiney tkl one
Post by: hineybush on Sat, 20 June 2020, 10:45:32
Is there an ISO plate option with it?

universal plate ya. renders were with the ansi only one i protoed with.
Title: Re: [GB] hiney tkl one
Post by: montereysamuel on Sat, 20 June 2020, 11:20:48
Hey Hiney - will you also release plate files for the Num One after initial group buy?

yeah sure I can!

That's awesome, thanks!
Title: Re: [GB] hiney tkl one
Post by: tul on Sat, 20 June 2020, 12:06:30
Is there an ISO plate option with it?

universal plate ya. renders were with the ansi only one i protoed with.
Thanks! we love you! :D
Title: Re: [GB] hiney tkl one
Post by: Zacharius on Sat, 20 June 2020, 15:39:28
My body is ready


Sent from my iPhone using Tapatalk
Title: Re: [GB] hiney tkl one
Post by: toanta on Sun, 21 June 2020, 08:44:05
Is there going to be a form posted somewhere?
Title: Re: [GB] hiney tkl one
Post by: mchanneh on Sun, 21 June 2020, 08:56:20
I imagine it will be updated on his website:

https://hineybush.com/blogs/news/hiney-tkl-one-group-buy-info
Title: Re: [GB] hiney tkl one
Post by: Dumble_Hub on Sun, 21 June 2020, 08:58:57
I imagine it will be updated on his website:

https://hineybush.com/blogs/news/hiney-tkl-one-group-buy-info

Is there going to be a form posted somewhere?

TKL ONE ENTRY FORM https://form.jotform.com/201558305114042


NUM ONE ENTRY FORM https://form.jotform.com/201695631822153
Title: Re: [GB] hiney tkl one
Post by: bthezebra on Sun, 21 June 2020, 09:06:17
Hiney's inbox is blowing up right now
Title: Re: [GB] hiney tkl one
Post by: adamjohari on Sun, 21 June 2020, 09:06:48
In for a Gold tkl and numpad! Woot!
Title: Re: [GB] hiney tkl one
Post by: adamjohari on Sun, 21 June 2020, 09:08:46
aw man wrote username as coolhwip in the form instead of adamjohari. confused my discord and geekhack account.  :blank:
Title: Re: [GB] hiney tkl one
Post by: justor on Sun, 21 June 2020, 09:09:36
Just entered, but only had the option for black and gold for the color? Maybe I'm missing something.
Title: Re: [GB] hiney tkl one
Post by: mchanneh on Sun, 21 June 2020, 09:09:42
I counted near 50 people viewing this thread concurrently when it was posted, GL everyone! I imagine the later raffle will have a lot more folk!
Title: Re: [GB] hiney tkl one
Post by: mchanneh on Sun, 21 June 2020, 09:10:07
Just entered, but only had the option for black and gold for the color? Maybe I'm missing something.

that's right, see opening thread + tail end of IC.
Title: Re: [GB] hiney tkl one
Post by: NoxNoxNox on Sun, 21 June 2020, 09:14:28
There were some issues with the form,

I went to submit the first time at 7 minutes after the hour and got a "Form is current unavailable" message, then tried again at :09 and got "Form Disabled".


Title: Re: [GB] hiney tkl one
Post by: justor on Sun, 21 June 2020, 09:15:44
Just entered, but only had the option for black and gold for the color? Maybe I'm missing something.

that's right, see opening thread + tail end of IC.

Ah I didn't see that, thank you. Was looking forward to that unlikely polycarb variant.
Title: Re: [GB] hiney tkl one
Post by: hineybush on Sun, 21 June 2020, 09:32:13
Just entered, but only had the option for black and gold for the color? Maybe I'm missing something.

Colors/Layouts

The color options will be gold and black. I will offer both WKL and winkey top variants.

hehe
Title: Re: [GB] hiney tkl one
Post by: hineybush on Sun, 21 June 2020, 09:33:30
There were some issues with the form,

I went to submit the first time at 7 minutes after the hour and got a "Form is current unavailable" message, then tried again at :09 and got "Form Disabled".

the form disabled for some reason about 7 minutes in yeah. I closed it at 10:10:00 based on my time here: http://time-time.net/timer/digital-clock.php

please feel free to join during the later session if you missed out on the early one.
Title: Re: [GB] hiney tkl one
Post by: hineybush on Sun, 21 June 2020, 09:34:54
aw man wrote username as coolhwip in the form instead of adamjohari. confused my discord and geekhack account.  :blank:

no probs there, you'll be alright!
Title: Re: [GB] hiney tkl one
Post by: Solotov on Sun, 21 June 2020, 09:48:59
May we know the amount of participants?  :p
Title: Re: [GB] hiney tkl one
Post by: OfTheWild on Sun, 21 June 2020, 09:56:14
Glad i got my entry in! Fingers crossed, GL everyone! Love this setup so much  :thumb:
Title: Re: [GB] hiney tkl one
Post by: ramnes on Sun, 21 June 2020, 10:56:10
good luck hiney
Title: Re: [GB] hiney tkl one
Post by: hottrout on Sun, 21 June 2020, 11:27:53
Good luck to everyone that entered and well done hineybush on a great TKL & Numpad combination.  I hope the whole thing goes well.
Title: Re: [GB] hiney tkl one
Post by: hineybush on Sun, 21 June 2020, 11:54:22
May we know the amount of participants?  :p

478 submissions in the first round.
Title: Re: [GB] hiney tkl one
Post by: PoohGom on Sun, 21 June 2020, 14:55:29
May we know the amount of participants?  :p

478 submissions in the first round.

This is potentially the Keyboard of the year, GL to all!
Title: Re: [GB] hiney tkl one
Post by: noorejji on Sun, 21 June 2020, 19:05:28
I have no idea what an area code is, so I just put "00" in there. GL all.
Title: Re: [GB] hiney tkl one
Post by: Dennyroxsox on Sun, 21 June 2020, 19:09:28
Good luck everyone!
Title: Re: [GB] hiney tkl one
Post by: noahf on Sun, 21 June 2020, 19:11:45
gl all
Title: Re: [GB] hiney tkl one
Post by: SirShakes on Sun, 21 June 2020, 19:13:08
hope I win
Title: Re: [GB] hiney tkl one
Post by: Zacharius on Sun, 21 June 2020, 19:36:48
Best of luck lads and lasses.


Sent from my iPhone using Tapatalk
Title: Re: [GB] hiney tkl one
Post by: hineybush on Sun, 21 June 2020, 19:40:51
Thanks for entering, everyone.

867 entries at the end of the day, after finding a few duplicates and bogus entries.

Title: Re: [GB] hiney tkl one
Post by: J3ff_Leopard on Sun, 21 June 2020, 20:10:42
Thanks for entering, everyone.

867 entries at the end of the day, after finding a few duplicates and bogus entries.

Congrats on the entry numbers. Can't wait to see the Vickrey.
Title: Re: [GB] hiney tkl one
Post by: macclack on Sun, 21 June 2020, 21:50:20
Good luck all!
Title: Re: [GB] hiney tkl one
Post by: adamjohari on Sun, 21 June 2020, 22:02:52
45/867 = 5% chance. congrats to the winners!
Title: Re: [GB] hiney tkl one
Post by: DukeEsquire on Mon, 22 June 2020, 00:36:25
Congrats on the raffle Hiney!

Even more exclusive than a Keycult.
Title: Re: [GB] hiney tkl one
Post by: //gainsborough on Mon, 22 June 2020, 01:33:28
45/867 = 5% chance. congrats to the winners!

WELL ACTUALLY

(https://i.ibb.co/1b4VxRn/well-actually.png) (https://imgbb.com/)
Title: Re: [GB] hiney tkl one
Post by: honoka on Mon, 22 June 2020, 01:52:52
5% is about 95% off from me having even the slightest chance

Sent from my SM-G970F using Tapatalk

Title: Re: [GB] hiney tkl one
Post by: tluer on Mon, 22 June 2020, 09:21:35
Anyone know when all the emails are going out? (if im asking this i probably already lost lol)
Title: Re: [GB] hiney tkl one
Post by: honoka on Mon, 22 June 2020, 09:22:21
Join discord for up to date information

Sent from my SM-G970F using Tapatalk

Title: Re: [GB] hiney tkl one
Post by: SolidCactus on Mon, 22 June 2020, 12:48:19
I struck out! Congrats to the winners.

Best of luck with the group buy hiney and hopefully there is an opportunity in the future to grab it again!
Title: Re: [GB] hiney tkl one
Post by: blaqbern on Mon, 22 June 2020, 14:04:04
Congrats to the winners! I’ll try again for the lilac in the next round.
Title: Re: [GB] hiney tkl one
Post by: lolpes on Mon, 22 June 2020, 16:34:09
Paid and already eager for it! I really hoped the lilac color was available, but i am just as happy with the gold!
Title: Re: [GB] hiney tkl one
Post by: supern00b on Mon, 22 June 2020, 17:29:54
Paid and already eager for it! I really hoped the lilac color was available, but i am just as happy with the gold!

i'm sure ppl will be willing to trade!
Title: Re: [GB] hiney tkl one
Post by: hineybush on Mon, 22 June 2020, 23:16:17
Hi all. Thanks for the interest and entries. All winners have been notified/invoiced. All losers have been notified. If you haven't gotten an email but entered, chances are that 1. you lost and 2. the mail service I used for the notifications didn't get to you. if you do want to be 100% sure please PM me here or on discord (@hineybush#0069) and I can verify it for you.

Once I have the funds avail I'll place the order with the factory and get this ball rolling.

I plan to vickrey at least some of the extras, so wait for that!

Thanks.
Title: Re: [GB] hiney tkl one
Post by: Krelbit on Mon, 22 June 2020, 23:34:45
daddy hiney's gotta keep those IPAs rolling somehow
Title: Re: [GB] hiney tkl one
Post by: hineybush on Fri, 17 July 2020, 21:31:47
all orders finalized, everyone's paid, the first 50% has been submitted to the factory. the PCBs have been ordered. I need to order the numone ones next, should be doing that early/mid next week.
Title: Re: [GB] hiney tkl one
Post by: Anthixious on Mon, 27 July 2020, 03:31:03
This looks like an amazing WKL + Num pad duo, anyway any of us can be notified of the next round when all this happens through GB/raffle again?
Title: Re: [GB] hiney tkl one
Post by: hineybush on Mon, 27 July 2020, 15:26:00
This looks like an amazing WKL + Num pad duo, anyway any of us can be notified of the next round when all this happens through GB/raffle again?

I will announce here, on my Discord (linked in the first post here) and likely on my IG as well.
Title: Re: [GB] hiney tkl one
Post by: Anthixious on Mon, 27 July 2020, 16:44:41
This looks like an amazing WKL + Num pad duo, anyway any of us can be notified of the next round when all this happens through GB/raffle again?

I will announce here, on my Discord (linked in the first post here) and likely on my IG as well.

 ;D