Author Topic: [GB] hiney tkl one  (Read 19864 times)

0 Members and 1 Guest are viewing this topic.

Offline hineybush

  • * Maker
  • Thread Starter
  • Posts: 1512
  • Location: Pittsburgh, PA, USA
  • student of error
    • hineybush keyboards
[GB] hiney tkl one
« on: Wed, 17 June 2020, 22:07:24 »
welcome to the first public round of the tkl one.


TKL ONE ENTRY FORM https://form.jotform.com/201558305114042


NUM ONE ENTRY FORM https://form.jotform.com/201695631822153




Here is the interest check thread: https://geekhack.org/index.php?topic=104750.0

The group buy spots will be based on a raffle. There will be two 10-minute-long time periods for entry. These time periods will be spaced 10 hours apart to ensure that people from all over the world may enter. Please only enter during one of the time slots, as all entries will be lumped together for the raffle process.

Date: June 21, 2020
Entry Period 1: 10:00 AM-10:10 AM EDT - Check your local time here: https://everytimezone.com/s/4bfaeeae
Entry Period 2: 8:00 PM-8:10 PM EDT - Check your local time here: https://everytimezone.com/s/ac5b9afb

Expected ship date: 4-6 months upon payment period completion. Perhaps sooner due to the lower volume.

Entries

This raffle will be limited to one entry per household. If you enter multiple times I reserve the right to disqualify you from this buy, as well as all future hiney product runs. Any attempt to circumvent this rule will result in the same thing, and I will be really annoyed so please just don't. Entries will be gathered by Jotform. It will collect all relevant info. If you are worried about using a proxy, I will cross reference IP+email+address+etc to try and verify each individual.

It is highly recommended to enter with your actual address, not a proxy address. The entry form has nothing to do with shipping (see the shipping section below), so it will make it easier for everyone to use your correct address.

Communication

Please use an email address that you use regularly for communication, as I will be sending winner notifications and Shopify invoices as well as updates and news to it.

Number of Slots

There are 45 slots to be raffled off. What you enter in the form should reflect what you desire in the end. Once winners are notified and invoices are sent out, I will allow a 24-hour grace period to adjust/change/drop out. All communications to change your order must be made via email at contact@hineybush.com .

Editing your order and Payment

I will allow 72 hours for payment completion (if you need more time please email me at contact@hineybush.com and we can work it out). If you don't email me to work it out and haven't paid within 72 hours of getting your invoice, the invoice will be cancelled and the next person on the winners' list will get your spot instead.

Shipping

Shipping invoices will be calculated and sent at the time of shipment and no shipping costs will be included in the initial invoice. Please make sure you include a regularly-used email address in your entry form, as said above. All domestic, US-based addresses will be shipped via USPS Priority Mail. All international orders will be shipped via DHL Express. The customer will be responsible for all shipping costs, including import fees.

Colors/Layouts

The color options will be gold and black. I will offer both WKL and winkey top variants.

Pricing

$505 USD for one (1) case + one (1) PCB. You will be required to choose one plate (options below) and will have an option to purchase one additional plate. There will also be an opportunity to order extra h87c-hsp PCBs. I will have the extra plates/PCBs up after the buy ships.

Suggested flip price $550 USD

Plate options

 - FR4 Full - matte black (+$25)
 - FR4 Half - matte black (+$25)
 - Brass Full - clear coated (+$35)
 - Aluminum Full - black anodized (+$35)
 - Polycarbonate Full - clear coated (+$35)
 - FR4 - Full - Alps - WKL/Tsangan - matte black (+$25)

Extra PCBs will be $48 USD each.

num one info

There is an option to also add a num one (offered in the same colors as tkl one) to your order. If you say you want one you will be led to that form within the tkl one form, if not you will skip that section. I will also post a separate GB form for those interested in only the num one. Keep in mind that the num one will only be offered in gold and black, just like the tkl one.

num one pricing

$175 (case + 1 PCB + 1 plate). Plate options are FR4 and Aluminum. Extra plates are $20 and extra PCBs are $25.

There will be a maximum of 60 num one slots given, including those who win the opportunity to buy them via raffle - so basically, if there are X tkl one winners who want a num one, 60-X slots will be available from the dedicated num one raffle.

Payment Specific to PayPal

Please note that my storefront does not accept PayPal due to their very annoying refund policy as well as their anti-group buy stance on funds release. If you secure a spot and MUST use PayPal, please contact me via email (contact@hineybush.com) and we will work it out. I would much prefer that you can find an alternative means of payment that doesn't involve PayPal.

Some pics
















the lilac will be in a future public round.. maybe for another keyboard first...



Note: the final gold color may vary slightly compared to my prototype. This is the end goal however it will be within 95% accuracy to this.

Here is the VOD to one of my proto builds. I do a bit of a sound comparison at the end featuring the brass-plate version (MX Blacks) and FR4 (Gat Inks) as well as other builds I have:

Other design considerations

-6 degree angle

-a.87 layout - h87a reference

-brass interior weight, stainless exterior

-USB Type C port

-burger mount optional ofc

-jane v2/koala/whale plate mount locations - these plates can be used

-Torx screws will be used - for the case/plate screws a T6 driver/bit is required. I recommend Wiha (1, 2), Wera (1) or Felo (1) drivers. The hardware is 18-8 stainless steel. Use cheap or crappy off brand torx drivers at your own risk. If you can afford a $500 keyboard, you can afford a $6 screwdriver. Also the weigh screws need a T10 drive end.

-I will be doing the non-ribbed-for-pleasure interior, as I don't believe there is a difference to warrant the increased cost of production.


Please keep up with the buy here, as well as on my other social medias:

discord.hiney.cc
ig.hiney.cc

thanks.
« Last Edit: Mon, 22 June 2020, 23:14:42 by hineybush »

Offline hineybush

  • * Maker
  • Thread Starter
  • Posts: 1512
  • Location: Pittsburgh, PA, USA
  • student of error
    • hineybush keyboards
Re: [GB] hiney tkl one
« Reply #1 on: Wed, 17 June 2020, 22:07:54 »
Updates

June 22, 2020 - All winners invoiced, all losers notified. Some notification emails haven't gone through it seems. If anyone wants to know for sure, shoot me your email in a PM, via email or via discord and I can verify for you.

« Last Edit: Mon, 22 June 2020, 23:17:21 by hineybush »

Offline zian_

  • Posts: 46
  • Location: United States
  • Skinny Legs
Re: [GB] hiney tkl one
« Reply #2 on: Thu, 18 June 2020, 14:22:38 »
Crossing fingers.

Offline onmybikedrunk

  • Posts: 234
  • Location: Portland, OR
    • Danny Woods - Industrial Designer
Re: [GB] hiney tkl one
« Reply #3 on: Thu, 18 June 2020, 14:24:29 »
**Bows to the RNG gods**

Offline noricon

  • Posts: 27
Re: [GB] hiney tkl one
« Reply #4 on: Thu, 18 June 2020, 14:27:27 »
pray to the gods.

Offline Alessio01

  • Posts: 14
Re: [GB] hiney tkl one
« Reply #5 on: Thu, 18 June 2020, 14:29:52 »
glwgb! and good luck to all of those entering  :thumb:

I will be waiting patiently for that sweet sweet lilac in a future round.

Offline bthezebra

  • Posts: 440
Re: [GB] hiney tkl one
« Reply #6 on: Thu, 18 June 2020, 14:31:15 »
All up on this Hiney

Offline hineybush

  • * Maker
  • Thread Starter
  • Posts: 1512
  • Location: Pittsburgh, PA, USA
  • student of error
    • hineybush keyboards
Re: [GB] hiney tkl one
« Reply #7 on: Thu, 18 June 2020, 14:31:50 »
glwgb! and good luck to all of those entering  :thumb:

I will be waiting patiently for that sweet sweet lilac in a future round.

The next round (hopefully in 3-4 months, around when this one ships?) will include lilac for sure. I'm not sure about the other color yet, I may put that to a vote.

Offline Tonkatonk

  • Posts: 107
Re: [GB] hiney tkl one
« Reply #8 on: Thu, 18 June 2020, 14:32:55 »
What a beautiful tkl+numpad combo



Noxary PC268.2 | Nunu

Offline Midori

  • Formerly loktrevor
  • Posts: 98
  • Location: Los Angeles, CA
  • c:
Re: [GB] hiney tkl one
« Reply #9 on: Thu, 18 June 2020, 14:33:49 »
litty titty
      

TGR Jane v2 | Keycult No2 rev1 | Matrix 8X v2.0 | Bean | hineybush tkl one | RS

Offline cdhoffmann

  • Posts: 72
Re: [GB] hiney tkl one
« Reply #10 on: Thu, 18 June 2020, 14:34:39 »
Let's go! GLWB and good luck everyone.

Offline SirShakes

  • Posts: 41
  • Location: SoCal
Re: [GB] hiney tkl one
« Reply #11 on: Thu, 18 June 2020, 14:34:56 »
Wtb

Offline killuchen

  • Posts: 35
Re: [GB] hiney tkl one
« Reply #12 on: Thu, 18 June 2020, 14:46:40 »
GL all! That lilac is gorgeous!

Offline duckboi

  • Posts: 168
  • Location: FL - US
Re: [GB] hiney tkl one
« Reply #13 on: Thu, 18 June 2020, 14:57:59 »
o yes
The m0ar empty you feel,  the m0ar space for Keycaps..

Offline steezkeez

  • Posts: 208
Re: [GB] hiney tkl one
« Reply #14 on: Thu, 18 June 2020, 16:55:02 »
saving monies for a stab at the next round, gl all

Offline o3okevin

  • Posts: 267
  • Location: Canada
Re: [GB] hiney tkl one
« Reply #15 on: Thu, 18 June 2020, 16:55:13 »
let's gooo

Offline roostrc0gburn

  • Posts: 1353
  • Location: Oregon
  • its just plastic
Re: [GB] hiney tkl one
« Reply #16 on: Thu, 18 June 2020, 16:58:32 »
nice work hiney, but what does this mean:
Quote
brass interior weight, stainless exterior

Offline zekkin

  • Posts: 460
  • Location: New York
  • my entire life was unlimited zekk works
Re: [GB] hiney tkl one
« Reply #17 on: Thu, 18 June 2020, 17:07:00 »
nice work hiney, but what does this mean:
Quote
brass interior weight, stainless exterior

check out the vod -- the weight is two pieces
Daily Driver: Seulgi FE
TGR-Alice | TGR-Jane v2 | TGR-Jane v2 CESeulgi | Matrix Lab 8xv2.0 | Ogre | Yves | KFE | hbcp | Nunu | Vulcan

Offline Arithmetics

  • Posts: 133
Re: [GB] hiney tkl one
« Reply #18 on: Thu, 18 June 2020, 17:12:43 »
i SUPPOSE!!

Offline Nigolski

  • Posts: 178
  • Location: Helsinki
Re: [GB] hiney tkl one
« Reply #19 on: Thu, 18 June 2020, 18:33:56 »
damn.
OTD 356CL

Offline bisoromi

  • Formerly Duwang
  • Posts: 148
  • Location: D[M]V
  • owo
Re: [GB] hiney tkl one
« Reply #20 on: Thu, 18 June 2020, 19:28:26 »
glwgb!!! first page gang!!!!
(credits to Kokaloo)

Offline Zach

  • Posts: 17
  • Location: California
Re: [GB] hiney tkl one
« Reply #21 on: Thu, 18 June 2020, 19:35:32 »
Oo gl everyone  :]
Whale x2 | Salamander x2 | E6.5 x2 | Nunu | 8XV2.0 | 1.2 OG | Polaris | E8.5 | *Rukia | *Infinitum

Offline teaayy

  • Posts: 2
Re: [GB] hiney tkl one
« Reply #22 on: Thu, 18 June 2020, 19:37:41 »
Beautiful board, let’s go for gold


Sent from my iPhone using Tapatalk

Offline kiyoboardasmr

  • Posts: 51
  • https://www.youtube.com/kiyoboard
    • https://www.youtube.com/kiyoboard
Re: [GB] hiney tkl one
« Reply #23 on: Thu, 18 June 2020, 19:54:14 »
In for gold

Offline jayiskuhl

  • Posts: 33
Re: [GB] hiney tkl one
« Reply #24 on: Thu, 18 June 2020, 19:59:14 »
Good luck everyone!

I am feeling the gold as well.
Space65 CV | Rukia | gaff. 60 | Pandora

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11571
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] hiney tkl one
« Reply #25 on: Thu, 18 June 2020, 20:14:09 »
PogU
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice (lost in mail T_T) | Revo One | z | Keycult No. 1

if you're actually reading other people's posts on geekhack in 2020 you're doing something wrong

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos | "Is Linkshine our Nixon?" -NAV (fk u) | "Puddsy is the puddsy of keebs" -ns90

Offline Remsky

  • Posts: 301
  • Location: Portland, OR
  • Lubed switch count > Puddsy post count
Re: [GB] hiney tkl one
« Reply #26 on: Thu, 18 June 2020, 21:45:44 »
light gold 2020
Jane v2 - GSKT00 - Jane CE V2(coming) - Poly alice (coming) - LZ Physix - Matrix 8XV 2.0 - KEI (coming)

Offline mrpetrov

  • Posts: 599
Re: [GB] hiney tkl one
« Reply #27 on: Thu, 18 June 2020, 22:25:16 »
Outstanding!

Hiney - what is your personal preference for plate(s) with this board?

Offline Spicemaster

  • Posts: 14
  • Location: NJ USA
Re: [GB] hiney tkl one
« Reply #28 on: Thu, 18 June 2020, 22:42:59 »
Might need my dad to enter this instead of me to get the Father's Day good luck bonus

Offline hineybush

  • * Maker
  • Thread Starter
  • Posts: 1512
  • Location: Pittsburgh, PA, USA
  • student of error
    • hineybush keyboards
Re: [GB] hiney tkl one
« Reply #29 on: Thu, 18 June 2020, 22:49:07 »
Outstanding!

Hiney - what is your personal preference for plate(s) with this board?

i am FR4 gang

however brass is lovely (typing on it now). I haven't done alu or pc, but those are both obviously good as well.

Offline mrpetrov

  • Posts: 599
Re: [GB] hiney tkl one
« Reply #30 on: Thu, 18 June 2020, 22:54:21 »
Outstanding!

Hiney - what is your personal preference for plate(s) with this board?

i am FR4 gang

however brass is lovely (typing on it now). I haven't done alu or pc, but those are both obviously good as well.

Full or half plate fr4 for you?

Offline hineybush

  • * Maker
  • Thread Starter
  • Posts: 1512
  • Location: Pittsburgh, PA, USA
  • student of error
    • hineybush keyboards
Re: [GB] hiney tkl one
« Reply #31 on: Thu, 18 June 2020, 22:56:13 »
Outstanding!

Hiney - what is your personal preference for plate(s) with this board?

i am FR4 gang

however brass is lovely (typing on it now). I haven't done alu or pc, but those are both obviously good as well.

Full or half plate fr4 for you?

sorta prefer full, however half is its' own experience with the reverb

Offline tul

  • Posts: 13
Re: [GB] hiney tkl one
« Reply #32 on: Fri, 19 June 2020, 02:23:45 »
All the plates will be ansi only? no iso option?

Offline hottrout

  • Posts: 686
  • Location: Northern Ireland
  • I'd Hit Dat Key
Re: [GB] hiney tkl one
« Reply #33 on: Fri, 19 June 2020, 02:37:41 »
I am ready for the gold.
I started typing on a Sinclair ZX Spectrum 'human flesh' keyboard in 1980 and I never stopped.

More
Work |i9-7940x@4.8ghz|32GB(3600)|RTX 2080Ti|Bespoke Water, 360m Rad|X299 Prime Deluxe|EK x299 Monoblock|Optane 900p|2x1TB 960 Pro|2x10TB Helium|Dell U3415W + Dell UP2116Q
Home |i9-9900k@5GHz|16GB(3200)|STRIX-RTX2080Ti|EK Closed Water Loop|Z390-F|1TB 960 Pro|1TB 980 Pro|Dell AW3418DW|NEC MultiSync|Rode NT1&AI-1|Drobo16TB
Mining |i5-7500|16GB(2400)|H110 Pro BTC+|8x1080Ti|2x1650Watt PSU

Plus 35 years of collecting retro computers, consoles, games, peripherals, mainframes and mini's as well as their software and manuals. 100's of systems including every Amiga model made
Systems
More
IBM 3101 | IBM 3276 | IBM 5150 | IBM ModelM | Dictaphone Dual Display | Cherry (all of them) | Commodore (all of them) | Nixdorf | Siemens | ICL | Filco Majistouch - Cherry Brown | KBDFans 5degree - Zilents | Rama M6-B - Healios | CA66 - Tealios v1 | ClueBoard - Zealios v1 | Varmilo VA69M - Cherry Black | E7-V1 SE | Rama U-80 - Ink Blacks 205g0 | VN66 | BOCC | Rama M10-C | FLX Virgo | Rama M60-A LYN | 2 x Space65 CyberVoyager | Clarabelle | Elongate Mini 1800 | Petrichor 1800 - Tangerines v1 Relubed 205g | Maja | Think6.5v2 | Bear | Sakabato CB87 | KCK KY-01 | Jae J-01 F&F | S7.7 | The Adélie | NIX OxalyS80 LE |
Keyboards

Offline ramnes

  • Posts: 835
  • Location: France
  • T fou, mec?
Re: [GB] hiney tkl one
« Reply #34 on: Fri, 19 June 2020, 04:26:11 »
I really really want this
23h18 - photekq: hhkb with silenced realforce sliders and lubricated well is
23h18 - photekq: the best switch i've used

Offline tomu

  • Posts: 107
  • Location: California
  • hi
Re: [GB] hiney tkl one
« Reply #35 on: Fri, 19 June 2020, 04:45:09 »
yum

Sent from my SM-G965U using Tapatalk

G80-3700 | HHKB Pro 2 | Vulcan Pro | Ogre | Nunu ver. PC | Jane V2 CE | 8XV2.0 | No. 1 | Mech 27 v2 (lol i wish haha) | G81-3100SAV

Offline gok101

  • Posts: 602
  • Location: NZ
  • Enjoy your PBT
    • Instagram
Re: [GB] hiney tkl one
« Reply #36 on: Fri, 19 June 2020, 04:49:09 »
that champagne is hot

Offline Quinella

  • Posts: 56
Re: [GB] hiney tkl one
« Reply #37 on: Fri, 19 June 2020, 04:52:34 »
GL ALL  :thumb:

Offline blitz

  • Posts: 30
Re: [GB] hiney tkl one
« Reply #38 on: Fri, 19 June 2020, 11:19:45 »
Lol, I love the “Suggested Flip Price”.
Glws Hiney!

Offline mcRewind

  • Posts: 14
  • Location: Las Vegas, NV
Re: [GB] hiney tkl one
« Reply #39 on: Fri, 19 June 2020, 12:10:15 »
"not for resale" pog

Looking forward to the raffle in a couple days. Thanks for this project hiney!

Offline montereysamuel

  • Posts: 5
Re: [GB] hiney tkl one
« Reply #40 on: Fri, 19 June 2020, 12:24:21 »
Hey Hiney - will you also release plate files for the Num One after initial group buy?

Offline hineybush

  • * Maker
  • Thread Starter
  • Posts: 1512
  • Location: Pittsburgh, PA, USA
  • student of error
    • hineybush keyboards
Re: [GB] hiney tkl one
« Reply #41 on: Fri, 19 June 2020, 12:31:24 »
Hey Hiney - will you also release plate files for the Num One after initial group buy?

yeah sure I can!

Offline MonsterM

  • Posts: 6
Re: [GB] hiney tkl one
« Reply #42 on: Fri, 19 June 2020, 18:56:12 »
Nice!

Offline hkhawk

  • Posts: 97
Re: [GB] hiney tkl one
« Reply #43 on: Fri, 19 June 2020, 19:15:21 »
Lol, I love the “Suggested Flip Price”.
Glws Hiney!

Bwahaha, I just saw that!

Offline hottrout

  • Posts: 686
  • Location: Northern Ireland
  • I'd Hit Dat Key
Re: [GB] hiney tkl one
« Reply #44 on: Sat, 20 June 2020, 03:18:12 »
Is there an ISO plate option with it?
I started typing on a Sinclair ZX Spectrum 'human flesh' keyboard in 1980 and I never stopped.

More
Work |i9-7940x@4.8ghz|32GB(3600)|RTX 2080Ti|Bespoke Water, 360m Rad|X299 Prime Deluxe|EK x299 Monoblock|Optane 900p|2x1TB 960 Pro|2x10TB Helium|Dell U3415W + Dell UP2116Q
Home |i9-9900k@5GHz|16GB(3200)|STRIX-RTX2080Ti|EK Closed Water Loop|Z390-F|1TB 960 Pro|1TB 980 Pro|Dell AW3418DW|NEC MultiSync|Rode NT1&AI-1|Drobo16TB
Mining |i5-7500|16GB(2400)|H110 Pro BTC+|8x1080Ti|2x1650Watt PSU

Plus 35 years of collecting retro computers, consoles, games, peripherals, mainframes and mini's as well as their software and manuals. 100's of systems including every Amiga model made
Systems
More
IBM 3101 | IBM 3276 | IBM 5150 | IBM ModelM | Dictaphone Dual Display | Cherry (all of them) | Commodore (all of them) | Nixdorf | Siemens | ICL | Filco Majistouch - Cherry Brown | KBDFans 5degree - Zilents | Rama M6-B - Healios | CA66 - Tealios v1 | ClueBoard - Zealios v1 | Varmilo VA69M - Cherry Black | E7-V1 SE | Rama U-80 - Ink Blacks 205g0 | VN66 | BOCC | Rama M10-C | FLX Virgo | Rama M60-A LYN | 2 x Space65 CyberVoyager | Clarabelle | Elongate Mini 1800 | Petrichor 1800 - Tangerines v1 Relubed 205g | Maja | Think6.5v2 | Bear | Sakabato CB87 | KCK KY-01 | Jae J-01 F&F | S7.7 | The Adélie | NIX OxalyS80 LE |
Keyboards

Offline tommyhongg

  • Posts: 11
  • Location: California, United States
Re: [GB] hiney tkl one
« Reply #45 on: Sat, 20 June 2020, 07:36:55 »
I love Hineybush and Hineybush keyboards.

Offline hineybush

  • * Maker
  • Thread Starter
  • Posts: 1512
  • Location: Pittsburgh, PA, USA
  • student of error
    • hineybush keyboards
Re: [GB] hiney tkl one
« Reply #46 on: Sat, 20 June 2020, 10:45:32 »
Is there an ISO plate option with it?

universal plate ya. renders were with the ansi only one i protoed with.

Offline montereysamuel

  • Posts: 5
Re: [GB] hiney tkl one
« Reply #47 on: Sat, 20 June 2020, 11:20:48 »
Hey Hiney - will you also release plate files for the Num One after initial group buy?

yeah sure I can!

That's awesome, thanks!

Offline tul

  • Posts: 13
Re: [GB] hiney tkl one
« Reply #48 on: Sat, 20 June 2020, 12:06:30 »
Is there an ISO plate option with it?

universal plate ya. renders were with the ansi only one i protoed with.
Thanks! we love you! :D

Offline Zacharius

  • Posts: 168
  • Location: ATX
Re: [GB] hiney tkl one
« Reply #49 on: Sat, 20 June 2020, 15:39:28 »
My body is ready


Sent from my iPhone using Tapatalk