« previous next »
Pages:  [1]     Go Down

Author Topic: HELP! Ducky Shine 3 stopped working  (Read 4186 times)

0 Members and 1 Guest are viewing this topic.

Offline ZippY_S

  • Thread Starter
  • Posts: 8
HELP! Ducky Shine 3 stopped working
« on: Sun, 15 May 2016, 09:05:55 »
Good afternoon, I had a problem with the keyboard Ducky Shine 3, I examine her, took the body, disabled PCB of the controller, cleaned the keyboard and plugged back in, but it has ceased to work, the keyboard is the power, but it is not lit and is not determined by the PC. I live in Russia, I bought it on this site: http: //****en.pro/, it ended guarantee  and so I decided to disassemble and clean it. What do i do? = ((
Logged

Offline suicidal_orange

  • * Global Moderator
  • Posts: 4771
  • Location: England
Re: HELP! Ducky Shine 3 stopped working
« Reply #1 on: Sun, 15 May 2016, 09:42:06 »
Check the wires where the cable connects to the PCB - they are thin and not made to move, so break easily.

What did you use to clean it?
Logged
120/100g linear Zealio R1  
GMK Hyperfuse
'Split everything' perfection   		MX Clear
SA Hack'd by Geeks     
EasyAVR mod

Offline ZippY_S

  • Thread Starter
  • Posts: 8
Re: HELP! Ducky Shine 3 stopped working
« Reply #2 on: Sun, 15 May 2016, 09:59:37 »
Quote from: suicidal_orange on Sun, 15 May 2016, 09:42:06
Check the wires where the cable connects to the PCB - they are thin and not made to move, so break easily.

What did you use to clean it?
compressed air
Logged

Offline HeeCh2ei

  • Posts: 74
  • qdrw
Re: HELP! Ducky Shine 3 stopped working
« Reply #3 on: Sun, 15 May 2016, 11:05:03 »
Do you already tried to disassemble the board and check everything: connectors, pcbs, ribbon cables, etc?
Is it possible that a controller can be damaged by static electricity while being disassembled?
Logged
Cherry is the Maker, Topre is the God
   
FC660C             FC750R (reds)     FC750R (blues)

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
Re: HELP! Ducky Shine 3 stopped working
« Reply #4 on: Sun, 22 May 2016, 04:56:31 »
Have you tried resetting the board?  How down both Win keys for at least 3 seconds (while it is plugged in).  The LEDs should flash a couple of times while it is resetting.

Or you could try updating the firmware.
Logged
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline ZippY_S

  • Thread Starter
  • Posts: 8
Re: HELP! Ducky Shine 3 stopped working
« Reply #5 on: Tue, 24 May 2016, 05:36:17 »
Quote from: rowdy on Sun, 22 May 2016, 04:56:31
Have you tried resetting the board?  How down both Win keys for at least 3 seconds (while it is plugged in).  The LEDs should flash a couple of times while it is resetting.

Or you could try updating the firmware.
Yes i tried ,my pc dont see keyboard (sorry for my english)
Logged

Offline itzmeluigi

  • Posts: 301
  • ПБТ
Re: HELP! Ducky Shine 3 stopped working
« Reply #6 on: Tue, 24 May 2016, 05:57:10 »
What was wrong with the Shine 3 before you took it apart?  When you put it back together did you make sure the black wires were on the top position and the red wire on the bottom?  If the connector was connected the wrong way then the board might be fried since a lot of people have fried the Shine 3 by connecting it the wrong way when putting it back together.
Logged

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
Re: HELP! Ducky Shine 3 stopped working
« Reply #7 on: Tue, 24 May 2016, 05:58:14 »
Quote from: ZippY_S on Tue, 24 May 2016, 05:36:17
Quote from: rowdy on Sun, 22 May 2016, 04:56:31
Have you tried resetting the board?  How down both Win keys for at least 3 seconds (while it is plugged in).  The LEDs should flash a couple of times while it is resetting.

Or you could try updating the firmware.
Yes i tried ,my pc dont see keyboard (sorry for my english)

Your English is fine - 100% better than my Russian!

Can you try the keyboard on a different computer?

Can you try a different USB cable?

Even a different USB port on your computer?
Logged
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline ZippY_S

  • Thread Starter
  • Posts: 8
Re: HELP! Ducky Shine 3 stopped working
« Reply #8 on: Tue, 24 May 2016, 06:07:11 »
Quote from: rowdy on Tue, 24 May 2016, 05:58:14
Quote from: ZippY_S on Tue, 24 May 2016, 05:36:17
Quote from: rowdy on Sun, 22 May 2016, 04:56:31
Have you tried resetting the board?  How down both Win keys for at least 3 seconds (while it is plugged in).  The LEDs should flash a couple of times while it is resetting.

Or you could try updating the firmware.
Yes i tried ,my pc dont see keyboard (sorry for my english)

Your English is fine - 100% better than my Russian!

Can you try the keyboard on a different computer?

Can you try a different USB cable?

Even a different USB port on your computer?
Can you try the keyboard on a different computer?-

Can you try a different USB cable? +

Even a different USB port on your computer? +
 Bios dont see
Logged

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
Re: HELP! Ducky Shine 3 stopped working
« Reply #9 on: Wed, 25 May 2016, 06:13:25 »
I have run out of ideas.

Perhaps the controller on the PCB has been zapped :(
Logged
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ
Pages:  [1]     Go Up
« previous next »