Author Topic: G710 Logitech Question  (Read 4349 times)

0 Members and 1 Guest are viewing this topic.

Offline giltyler

  • Thread Starter
  • Posts: 16
G710 Logitech Question
« on: Sun, 10 November 2013, 15:13:16 »
I have acquired a new G710 keyboard and I pulled a key to look at the Cherry MX Brown and noticed a small thin black o ring and want to know if that is the same thing as an o ring mod?
Key Cap also seems flimsy
http://
« Last Edit: Sun, 10 November 2013, 15:15:14 by giltyler »

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12281
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: G710 Logitech Question
« Reply #1 on: Sun, 10 November 2013, 15:14:54 »
It is. G710 comes with them out of the box.
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline tbc

  • Posts: 2365
Re: G710 Logitech Question
« Reply #2 on: Sun, 10 November 2013, 16:49:47 »
anything you can buy off the shelf will have flimsy keycaps
ALL zombros wanted:  dead or undead or dead-dead.

Offline C5Allroad

  • Formerly HUNTERANGEL121
  • Posts: 1237
  • Location: Miami, FL
  • Watch out, I post when half asleep.
Re: G710 Logitech Question
« Reply #3 on: Sun, 10 November 2013, 19:14:32 »
Except higher end boards (not that the G710+ isn't high end) such as the nighthawk, Shine 3, Keycool. And such. But yes that is the same thing as the o-ring mod.
« Last Edit: Sun, 10 November 2013, 19:26:19 by HUNTERANGEL121 »

Offline terran5992

  • Posts: 1485
  • Location: Singapore
  • One With The Cup Rubber
Re: G710 Logitech Question
« Reply #4 on: Sun, 10 November 2013, 19:15:08 »
Yup its the same :)

Listokei Custom  |  HHKB Pro 2  |  Topre Realforce 103UBH  |  Armageddon MKA-3


Offline kaotikb

  • Posts: 91
  • Location: Alberta, Canada
Re: G710 Logitech Question
« Reply #5 on: Sun, 10 November 2013, 19:28:30 »
I had a 710 keyboard and didn't like it. I ended up returning it. The key caps seem to look the same as the gigabyte osmium ones, minus the o ring.  I ended up changing the key caps on the osmium since i didn't like them either.

Ducky 1087 (Green ALPS) |  CM QFR Stealth (MX Brown) | Unicomp Ultra Classic |Poker II (MX Brown)  | IBM 1391401 1991 | IBM 1391401 1989 | Ducky Shine 3 White Edition (MX Brown) | G80-3700(MX Black) | Corsair K70 (MX Brown) | Varmillo VA87MR (Gateron Red)

Pointing Devices:  Microsoft Trackball Optical (Ceramic bearings Installed)  | Sanwa MA-TB39BK (Larger Ceramic Bearings Installed) | Elecom M-XT2URBK | Kensington Slimblade | Logitech Trackman Wheel | Logitech Trackman Marble Plus

Offline wetto

  • Posts: 641
  • Location: Brazil
  • Brazil's Keyboard Enthusiasts Representative
    • Portuguese Mechanical Keyboard Guide
Re: G710 Logitech Question
« Reply #6 on: Mon, 11 November 2013, 16:58:48 »
I had a G710+ for review and the G5 keycap came in broken (in order: G710, Tt Meka G-Unit, Metadot Das Keyboard (Costar), Corsair K70 and CM Storm Trigger.



I was quite dissapointed, but in the end I gave it a 7/10 grade, it's average, but it surely ain't a high-end keyboard, starting by the low-quality keycaps. Same can be said for the Tt Meka G-Unit (5/10) and Corsair K70 (8/10).
My collection:
More
Mice: Logitech G602, CM Storm Recon, CM Storm Spawn, Razer Naga, Ozone Radon Opto, Corsair M60, Tesoro Gandiva, CM Storm Alcor, Mionix Naos 8200.
Keyboards: Matias Secure Pro, Matias Mini Quiet Pro, custom modded Metadot Das Keyboard Model S Professional Silent (MX Brown, Costar), CM Storm Trigger (MX Brown), Noppoo Choc Mini (MX Red), Tesoro Lobera G5NFL Supreme, CM Storm Devastator.
Soon: CM Storm Quick Fire TK (MX Brown), CM Storm Trigger Z.
Boards I don't own anymore: CM Storm Quick Fire Rapid (MX Black), Logitech K800 (Membrane), Logitech G710+ (MX Brown), Thermaltake Meka G-Unit (MX Black), Corsair K70 (MX Red).
Mice I don't own anymore: Logitech G9x MW3, Corsair M65, Logitech G700, Roccat Kone Pure.

Offline catnipz0098

  • Posts: 163
  • Location: Iowa
Re: G710 Logitech Question
« Reply #7 on: Mon, 11 November 2013, 17:00:52 »
Aren't most backlit keys that quality?

Offline tbc

  • Posts: 2365
Re: G710 Logitech Question
« Reply #8 on: Mon, 11 November 2013, 17:50:45 »
Except higher end boards (not that the G710+ isn't high end) such as the nighthawk, Shine 3, Keycool. And such. But yes that is the same thing as the o-ring mod.

those aren't off the shelf. ;P can't say I've ver seen them at bestbuy or a non-mech shop.

are the shine 3 keycaps better than the zero shine series?  cause the 2108s aren't anything special.
ALL zombros wanted:  dead or undead or dead-dead.

Offline wetto

  • Posts: 641
  • Location: Brazil
  • Brazil's Keyboard Enthusiasts Representative
    • Portuguese Mechanical Keyboard Guide
Re: G710 Logitech Question
« Reply #9 on: Mon, 11 November 2013, 17:59:36 »
Aren't most backlit keys that quality?

Nope, even though they're from the same place, the K70's are a bit better (not too much) and the CM Storm Trigger and Ducky Shine III keycaps are far better in terms of material and width.
My collection:
More
Mice: Logitech G602, CM Storm Recon, CM Storm Spawn, Razer Naga, Ozone Radon Opto, Corsair M60, Tesoro Gandiva, CM Storm Alcor, Mionix Naos 8200.
Keyboards: Matias Secure Pro, Matias Mini Quiet Pro, custom modded Metadot Das Keyboard Model S Professional Silent (MX Brown, Costar), CM Storm Trigger (MX Brown), Noppoo Choc Mini (MX Red), Tesoro Lobera G5NFL Supreme, CM Storm Devastator.
Soon: CM Storm Quick Fire TK (MX Brown), CM Storm Trigger Z.
Boards I don't own anymore: CM Storm Quick Fire Rapid (MX Black), Logitech K800 (Membrane), Logitech G710+ (MX Brown), Thermaltake Meka G-Unit (MX Black), Corsair K70 (MX Red).
Mice I don't own anymore: Logitech G9x MW3, Corsair M65, Logitech G700, Roccat Kone Pure.

Offline C5Allroad

  • Formerly HUNTERANGEL121
  • Posts: 1237
  • Location: Miami, FL
  • Watch out, I post when half asleep.
Re: G710 Logitech Question
« Reply #10 on: Mon, 11 November 2013, 18:27:59 »
Except higher end boards (not that the G710+ isn't high end) such as the nighthawk, Shine 3, Keycool. And such. But yes that is the same thing as the o-ring mod.

those aren't off the shelf. ;P can't say I've ver seen them at bestbuy or a non-mech shop.

are the shine 3 keycaps better than the zero shine series?  cause the 2108s aren't anything special.
The best buy in Aventura here in Miami has mechanical boards... Granted they are Razer, Logitech, and Corsair.
I haven't used the zero shine, but I think they are the same. But looking at the price point of it, it might be different. If you want I can post pictures of my caps.

Offline wetto

  • Posts: 641
  • Location: Brazil
  • Brazil's Keyboard Enthusiasts Representative
    • Portuguese Mechanical Keyboard Guide
Re: G710 Logitech Question
« Reply #11 on: Mon, 11 November 2013, 18:34:55 »
Except higher end boards (not that the G710+ isn't high end) such as the nighthawk, Shine 3, Keycool. And such. But yes that is the same thing as the o-ring mod.

those aren't off the shelf. ;P can't say I've ver seen them at bestbuy or a non-mech shop.

are the shine 3 keycaps better than the zero shine series?  cause the 2108s aren't anything special.
The best buy in Aventura here in Miami has mechanical boards... Granted they are Razer, Logitech, and Corsair.
I haven't used the zero shine, but I think they are the same. But looking at the price point of it, it might be different. If you want I can post pictures of my caps.

Easiest way is to check if there's a mark left by the molding or not behind the keycaps of the Ducky Shine III and Shine Zero:



The Shine II had those because they're keycaps made by a Taiwanese vendor, his keycap tooling leaves that mark.
My collection:
More
Mice: Logitech G602, CM Storm Recon, CM Storm Spawn, Razer Naga, Ozone Radon Opto, Corsair M60, Tesoro Gandiva, CM Storm Alcor, Mionix Naos 8200.
Keyboards: Matias Secure Pro, Matias Mini Quiet Pro, custom modded Metadot Das Keyboard Model S Professional Silent (MX Brown, Costar), CM Storm Trigger (MX Brown), Noppoo Choc Mini (MX Red), Tesoro Lobera G5NFL Supreme, CM Storm Devastator.
Soon: CM Storm Quick Fire TK (MX Brown), CM Storm Trigger Z.
Boards I don't own anymore: CM Storm Quick Fire Rapid (MX Black), Logitech K800 (Membrane), Logitech G710+ (MX Brown), Thermaltake Meka G-Unit (MX Black), Corsair K70 (MX Red).
Mice I don't own anymore: Logitech G9x MW3, Corsair M65, Logitech G700, Roccat Kone Pure.

Offline C5Allroad

  • Formerly HUNTERANGEL121
  • Posts: 1237
  • Location: Miami, FL
  • Watch out, I post when half asleep.
Re: G710 Logitech Question
« Reply #12 on: Mon, 11 November 2013, 18:41:03 »
Shine 3 has that.

Offline tbc

  • Posts: 2365
Re: G710 Logitech Question
« Reply #13 on: Mon, 11 November 2013, 19:19:34 »
Except higher end boards (not that the G710+ isn't high end) such as the nighthawk, Shine 3, Keycool. And such. But yes that is the same thing as the o-ring mod.

those aren't off the shelf. ;P can't say I've ver seen them at bestbuy or a non-mech shop.

are the shine 3 keycaps better than the zero shine series?  cause the 2108s aren't anything special.
The best buy in Aventura here in Miami has mechanical boards... Granted they are Razer, Logitech, and Corsair.
I haven't used the zero shine, but I think they are the same. But looking at the price point of it, it might be different. If you want I can post pictures of my caps.

thanks, but I'm actually getting my shine 3 in about 3 weeks, so I'll do a RL feel test for myself.
ALL zombros wanted:  dead or undead or dead-dead.

Offline C5Allroad

  • Formerly HUNTERANGEL121
  • Posts: 1237
  • Location: Miami, FL
  • Watch out, I post when half asleep.
Re: G710 Logitech Question
« Reply #14 on: Mon, 11 November 2013, 19:50:58 »
Congrats! Amazing board!

Offline giltyler

  • Thread Starter
  • Posts: 16
Re: G710 Logitech Question
« Reply #15 on: Wed, 13 November 2013, 15:42:57 »
Thanks for the input on the Caps, For something that retails at $149.99 (I only paid $109.06 out the door) I would have expected better key caps and a puller with some alternate keys
The Brown MX switches seem very nice though and the o rings make it quicker for me to use

Offline C5Allroad

  • Formerly HUNTERANGEL121
  • Posts: 1237
  • Location: Miami, FL
  • Watch out, I post when half asleep.
Re: G710 Logitech Question
« Reply #16 on: Wed, 13 November 2013, 16:08:33 »
Yes! Browns and o-rings are amazing!

Offline 1391406

  • Posts: 1191
  • Posts: 24838
Re: G710 Logitech Question
« Reply #17 on: Wed, 20 November 2013, 15:41:07 »
Anyone know what size the o-rings are on the G710? WASD sells 0.2mm and 0.4mm. I'm guessing they're probably 0.2mm.
Unicomp Classic | Chicony KB-5181 (Monterey Blues) | IBM Model M (1391401) | IBM XT Model F | IBM AT Model F | Dell AT101W | 122-key IBM Model F
IBM Model M13 | Apple Extended Keyboard | Apple Extended Keyboard II | MTEK K104 | NTC KB-6251/2 | Realforce 87U | Realforce 104U | Type Heaven

Offline tbc

  • Posts: 2365
Re: G710 Logitech Question
« Reply #18 on: Wed, 20 November 2013, 16:01:47 »
Thanks for the input on the Caps, For something that retails at $149.99 (I only paid $109.06 out the door) I would have expected better key caps and a puller with some alternate keys
The Brown MX switches seem very nice though and the o rings make it quicker for me to use

backlit keycaps are all kinda crappy (although deck has some pretty nice ones according to the vendors).

you're paying most of the money for the brand name and the customer support.
ALL zombros wanted:  dead or undead or dead-dead.

Offline Grendel

  • Posts: 462
  • Location: OR, USA
    • Firmware for Costar Replacement Controllers
Re: G710 Logitech Question
« Reply #19 on: Wed, 20 November 2013, 18:48:26 »
Anyone know what size the o-rings are on the G710? WASD sells 0.2mm and 0.4mm. I'm guessing they're probably 0.2mm.

AFAICR they are the same as these, that would be 0.4mm reduction.
Currently using: RK-9000WH/GR, CMS QFXT w/ Ghost Squid
- I'm game !