Author Topic: [FS] (Read 19586 times)

cgbuen · « **on:** Wed, 26 December 2012, 01:12:14 »

___________________________

Gone

More

~~Modded Filco MJ2 TKL, no caps~~ $120 + priority shipping
~~Mint Skull CC MX~~ TRADED
~~Assembled bpiphany Filco controller~~ $22 + shipping
~~Brand new QFR keycaps~~ $10 shipped CONUS
~~G80-8200 cable only~~ free + shipping
~~Black Gas Mask (green eyes)~~ $19 + shipping
~~HHKB Black Printed Keyset~~ $30 + shipping
~~Full-Size Filco MJ2 [stickered/lubed vintage blacks/45g springs/front-print keycaps/50A o-rings] + DSA Retro [alpha, plum mods, 1x mods, spacebars, other extras]~~ $220 + shipping
~~Blank black TKL caps~~ $10 + shipping
~~QFR [universal plate/stickered/lubed vintage blacks/45g springs/no keycaps]~~ $130 local pickup
~~Switch Sampler Plate Set~~ $48 + shipping
~~Vintage Black Springs~~ $0.10/spring
~~WYSE WY85 Keycaps~~ $8 + shipping
~~RadioShack Desoldering Iron (solder sucker), half-used tip, and 4 brand new spare tips~~ $13 + shipping
~~WYSE WY60 Keycaps~~ $10 + shipping
~~Boost PBT RGB (Winkey - 1.25x) with extras~~ $30 + shipping
~~QFR with MX Browns~~ $55 + shipping
~~GMK/Originative RGB (Winkey - 1.25x)~~ $28 + shipping
~~Naked G80-3494 modded to MX Blues~~ $49 shipped CONUS
~~Cherry white on black doubleshot POS partial keycap set + replacement options~~ $40 shipped CONUS
~~Cherry white on black doubleshot keycap set from an MY board + extra universal spacebar~~ $18 shipped CONUS
~~Cherry beige lasered PBT POS set + ISO adapter kit~~ $18 shipped CONUS
~~98 Vintage WYSE blacks~~ $30 shipped CONUS
~~Ducky 17” wrist rest~~ $21 shipped CONUS
~~Red-eyed gas mask~~ $22 shipped CONUS

Gupgup · « **Reply #1 on:** Thu, 27 December 2012, 22:45:17 »

PM'd you about Beige set, PM back please

jeroplane · « **Reply #2 on:** Fri, 28 December 2012, 01:23:40 »

Is Item B fully compatible with modern keyboards? I.e. are the 1.25x mods centre-stemmed, as well as the Caps Lock? If so, could you give me a quote for international shipping?

If the Caps Lock isn't, I wonder if you could include the Moogle Caps Lock with Item B?

Gupgup · « **Reply #3 on:** Fri, 28 December 2012, 10:40:49 »

Payment sent! Thanks!

lawxninja · « **Reply #4 on:** Wed, 02 January 2013, 23:11:32 »

PM'd about the gas mask. Thanks.

kalgalath · « **Reply #5 on:** Wed, 09 January 2013, 09:09:00 »

Bump!

Just wanted to push this back up to the top and say thanks for the great transaction cgbuen!

I purchased the Ducky Wristrest that was for sale. Not only does the wrist rest look brand new, the communication was quick and excellent.

WhiteFireDragon · « **Reply #6 on:** Tue, 12 February 2013, 23:39:57 »

Quote

- 1mm Width o-rings, 50A or softer, a la "Pack D" WhiteFireDragon's 2012 GB (picture) (looking for anywhere up to 300 of these)

These can't be bought in any stores, that's why I had them custom made. I think only 1100 were ordered, and I know the guys that ordered those won't want to let them go. You might want to PM sordna, he bought 200 I think. Asking for 300 is a longshot.

Weren't you the one that got lucky and bought my person set?

cgbuen · « **Reply #7 on:** Tue, 12 February 2013, 23:44:52 »

Haha, yeah, that was me. Worth a shot to ask, I've been loving them. Didn't realize they were custom made and that the run was that small, I was wondering why that width seemed to be a bit hard to find when looking on different components sites.

metafour · « **Reply #8 on:** Wed, 29 May 2013, 21:36:56 »

Still need this?

Rendom · « **Reply #9 on:** Fri, 31 May 2013, 15:54:29 »

Nice board, GLWS.

khaangaaroo · « **Reply #10 on:** Fri, 31 May 2013, 23:03:03 »

I think I have a 1.25 DSA shift lock. PM incoming

SpAmRaY · « **Reply #11 on:** Mon, 03 June 2013, 15:59:55 »

Switch Sampler Plate Set $48 + shipping

^^ do you have any pictures of the back?

SpAmRaY · « **Reply #12 on:** Thu, 06 June 2013, 21:21:34 »

ygpm!

Photoelectric · « **Reply #13 on:** Mon, 17 June 2013, 14:43:05 »

Vintage MX Blacks are really nice! If anyone has doubts

They are slightly lighter than modern MX Blacks and have very low friction, so they feel great!

lightsout714 · « **Reply #14 on:** Wed, 19 June 2013, 18:32:27 »

nubbinator · « **Reply #15 on:** Sat, 29 June 2013, 00:05:51 »

Are you only accepting CC or Brobot trades for the Purple People Eater Brobot (and I'm assuming it's MX?).

cgbuen · « **Reply #16 on:** Sat, 29 June 2013, 00:13:16 »

Feel free to send any kind of trade offer, but if it isn't (or previously wasn't) in my looking for list I might not be as likely to say yes.

And yes, the Brobot is MX.

bueller · « **Reply #17 on:** Sat, 29 June 2013, 06:05:36 »

You keen to ship the ABS filco caps to Australia? If so I'll take them!

acantha · « **Reply #18 on:** Mon, 01 July 2013, 04:32:01 »

Would you be interested in selling the retro keycaps seperate from the keyboard they're currently on? cause im dying to get a hold of that set, but don't really need the keyboard.

TD22057 · « **Reply #19 on:** Tue, 02 July 2013, 14:50:24 »

PM sent on the filco+dsa retro...

oTurtlez · « **Reply #20 on:** Thu, 11 July 2013, 08:56:29 »

YGPM

MJ45 · « **Reply #21 on:** Fri, 26 July 2013, 18:02:29 »

esoomenona · « **Reply #22 on:** Fri, 09 August 2013, 11:16:31 »

PM me your address and I'll send you that WoB Windows key. You just want one? Or...?

scruffles · « **Reply #23 on:** Sun, 18 August 2013, 14:46:51 »

phx · « **Reply #24 on:** Thu, 22 August 2013, 14:29:30 »

pmed

KangarooZombies · « **Reply #25 on:** Wed, 28 August 2013, 02:33:12 »

ygpm~

ohgodpleaseno · « **Reply #26 on:** Fri, 30 August 2013, 09:11:44 »

Hey, I've been interested in buying the custom Filco controller for a while now, but I'm not sure if it only works on certain boards? I don't have a TKL and I only see people talking about putting it on that type of board. Would the controller work on a full sized Filco Ninja? If so I'm interested in purchasing it

cgbuen · « **Reply #27 on:** Fri, 30 August 2013, 22:46:24 »

It won't work for full-size Filcos since the shape and pins are different. You would need one of bpiphany's other controllers, the Kitten Paw. These don't come fully assembled so you'll need to do some soldering to get it to work.

Dansor · « **Reply #28 on:** Tue, 24 September 2013, 23:08:51 »

Sent PM on working bpipheny filco controller.
SUPER interested I'm that:)

Going to have trouble sleeping tonight thinking of all the stuff I'm going to do with it.

Totally not nerdy...

cgbuen · « **Reply #29 on:** Thu, 26 September 2013, 21:42:56 »

Assembled bpiphany controller sold.

slip84 · « **Reply #30 on:** Thu, 26 September 2013, 22:34:59 »

Every time I see this thread, I think you're actually selling CCs and Brobots. Silly me.

brighenne · « **Reply #31 on:** Thu, 31 October 2013, 23:02:22 »

I've got a 7x Dolch spacebar, that seems like a fair trade for a clack right?

cgbuen · « **Reply #32 on:** Fri, 15 November 2013, 23:51:20 »

Bump. Small price drop on the Filco.

shrubkeys · « **Reply #33 on:** Wed, 15 April 2015, 22:43:07 »

If you're still looking for a 7u space bar, SP has them on their site in both of the original Dolch colors (GE/GX). Cheap, too. Just go to their "Blank Key Packs" and choose a spacebar from the profile you want.

Joey Quinn · « **Reply #34 on:** Wed, 15 April 2015, 22:53:55 »

Quote from: shrubkeys on Wed, 15 April 2015, 22:43:07

If you're still looking for a 7u space bar, SP has them on their site in both of the original Dolch colors (GE/GX). Cheap, too. Just go to their "Blank Key Packs" and choose a spacebar from the profile you want.

The last post in this thread is 2013 and the OP hasn't been updated for a year.

shrubkeys · « **Reply #35 on:** Thu, 16 April 2015, 00:27:43 »

You're absolutely correct. Must have gotten my tabs confused - probably was a search result I didn't close. Apologies for the necro, everybody!

News:

Author Topic: [FS] (Read 19586 times)