PCB makers, can you verify my design?

[BDhoel]

Hello everyone,

Can someone help me verify my PCB design? Here is my layout http://www.keyboard-layout-editor.com/#/gists/192597c47f1e4330ec8626c5ada6497d. My concern is about the placement of stabilizers and the foot print of non 1u key. This is my PCB design
https://easyeda.com/editor#id=|a8e4d8bbd6be4d99884cb32722743e86

Thank you.

[TalkingTree]

Move:
U14 (and the stab) 10 mil to the right;
U15 10mil to the right;
U29 20mil to the right;
U42 (and the stab) 10 mil to the right;
U55 and U56 10 mil to the right;
U57 and U58 20 mil to the right;

Everything else looks fine to me.

[BDhoel]

Move:
U14 (and the stab) 10 mil to the right;
U15 10mil to the right;
U29 20mil to the right;
U42 (and the stab) 10 mil to the right;
U55 and U56 10 mil to the right;
U57 and U58 20 mil to the right;

Everything else looks fine to me.

Thanks for your time to verify my PCB design. I really appreciate it. 

[TalkingTree]

Thanks for your time to verify my PCB design. I really appreciate it. 

You're very welcome. When in doubt you can generate a plate through swill's builder and import the .dxf in your EasyEDA project to see if everything is aligned properly.