Author Topic: [GB] Wonderland PCB & Lubrigante Acrylic Case - UPDATE: Production started  (Read 27337 times)

fancy_pantser and 6 Guests are viewing this topic.

Offline homerowco

  • Thread Starter
  • Posts: 79
I will update this post tomorrow with more details, meanwhile feel free to join us on Discord if you have any questions: https://discord.gg/t2rrhfg


The Wonderland PCB and the Lubrigante Acrylic Case Kit Group Buy is opening for everyone:
$44 for a PCB and $68 for a clean acrylic case in various colors!*





You can find any further details on the GB form: https://forms.gle/V4YCsGoxYWUvY4UF7
Please, please, please read the description to answer all your questions ahead of selecting any options!**


Starts: NOW!
Ends: 1 Week from NOW or when a limit is reached where I think it does not get out of control. (~100 kits)
Estimated delivery: Around end of next month (may) if the keeb gods shine bright on us.***



* plus Shipping & PayPal fees
** Seriously, read it!
*** Worst case end of June, you know how it goes... lets just say I have no trust in customs.



UPDATE 01

As you can see it's closed now the latest update can be read here:
https://www.reddit.com/r/MechanicalKeyboards/comments/bepb33/update01gb_wonderland_pcb_lubrigante_acrylic_case/

Links to some clips from the latest stream where I answered various questions:
Typing: https://clips.twitch.tv/AltruisticTriangularArugulaSpicyBoy
Bending: https://clips.twitch.tv/SpunkyPiercingOxCharlieBitMe
Glowing: https://clips.twitch.tv/ExuberantProtectiveBeanBudBlast
Rotating: https://clips.twitch.tv/ZanyTemperedSquirrelAsianGlow


UPDATE 02

Latest update is here:
https://www.reddit.com/r/MechanicalKeyboards/comments/bj4oyi/update02gb_wonderland_pcb_lubrigante_acrylic_case/

Short version:
We decided to do two colors, black and white silkscreen PCBs! Meaning you can now change your order if you dont want your order of black or white or if you picked anything else or dont care and you DONT want black. All choices that arent black or white will default to black! Let me know asap, if possible on discord: https://discord.gg/t2rrhfg
If you have selected 2 PCB's you can now pick one of each, black and white, if you want. If you don't let me know it will default to black on the second PCB as well!
« Last Edit: Thu, 06 June 2019, 13:29:20 by homerowco »

Offline Photoelectric

  • * Administrator
  • Posts: 6753
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - Open Now
« Reply #1 on: Sat, 13 April 2019, 23:16:41 »
Approval bump!
- Keyboards: LZ-GH (Jailhouse Blues)M65-a, MIRA SE, E8-V1, MOON TKL, CA66
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline oldcat

  • Posts: 2061
  • Location: Arizona
  • 65% is Life
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - Open Now
« Reply #2 on: Sat, 13 April 2019, 23:22:12 »
Wonderful!

Offline JubJubCity

  • Posts: 320
  • Location: Bay Area
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - Open Now
« Reply #3 on: Sun, 14 April 2019, 00:24:08 »
Joined can't wait

Offline homerowco

  • Thread Starter
  • Posts: 79
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - Open Now
« Reply #4 on: Sun, 14 April 2019, 08:33:40 »
thanks @photoelectric ;)

Offline ChitownM2

  • Posts: 311
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - Open Now
« Reply #5 on: Sun, 14 April 2019, 18:09:53 »
ordered one. Now that it is going in batches, how long do you think it will be to complete the GB?

Offline gabbbe

  • Posts: 80
  • Location: Brooklyn, NY
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - Open Now
« Reply #6 on: Mon, 15 April 2019, 00:50:41 »
I already joined the PCB gb. Can I get the case only?


Sent from my iPhone using Tapatalk

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11128
  • Location: Campaign Trail
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - Open Now
« Reply #7 on: Mon, 15 April 2019, 02:05:28 »
Ordered two. One to match Red Riot when I finally get my sets, the other for the matte black aesthetic.
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | MIRA SE | TGR Alice | Daily driver: TGR Alice

Everything you have said in the past has been false so I will keep my hope.

Online DukeEsquire

  • Posts: 131
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - Open Now
« Reply #8 on: Mon, 15 April 2019, 09:59:13 »
[NM]
« Last Edit: Mon, 15 April 2019, 16:12:55 by DukeEsquire »

Offline wholypantalones

  • Posts: 646
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - Open Now
« Reply #9 on: Mon, 15 April 2019, 11:23:25 »
Excellent.
« Last Edit: Tue, 30 April 2019, 13:36:23 by wholypantalones »

Offline mrboli

  • Posts: 37
  • Location: Toronto, Canada
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - Open Now
« Reply #10 on: Mon, 15 April 2019, 11:56:21 »
Entered the GB via the form.

I didn't see an option to to get a different color for the PCB for the second, is it that only one color for the PCB will be manufactured?

When do we send the payment / will get the invoice?
KBD67 Zealios V2 65g | HHKB Pro 2 | Filco TKL MX Black | Razer BlackWidow

Offline ReDsNoTDeAd

  • Posts: 408
  • Location: Alberta, Canada
  • using keeb funds to make 3d printed gfs by 2022
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - Open Now
« Reply #11 on: Mon, 15 April 2019, 12:17:30 »
Entered the GB via the form.

I didn't see an option to to get a different color for the PCB for the second, is it that only one color for the PCB will be manufactured?

When do we send the payment / will get the invoice?

There is only one PCB color, that's whats being voted on. From the discord discussion, it looks like White/USB-C are winning out by a large margin. GB closes on the 20th, so I'm guessing invoices will start going out then. They're doing FCFS batches, so if you're in later you might not get one right away - but if you're in then you're in, you just have to be patient ;)

Offline JubJubCity

  • Posts: 320
  • Location: Bay Area
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - Open Now
« Reply #12 on: Mon, 15 April 2019, 21:33:24 »
the form is closed now and i would like to add another PCB, is that still possible?

Offline keimura

  • Posts: 8
  • Location: USA
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - Open Now
« Reply #13 on: Mon, 15 April 2019, 22:06:41 »
I would like to add another case and also double check that I filled out the form correctly. I have a feeling that I didn't read properly and didn't select a plate with my case...

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11128
  • Location: Campaign Trail
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - Open Now
« Reply #14 on: Mon, 15 April 2019, 22:09:49 »
I would like to add another case and also double check that I filled out the form correctly. I have a feeling that I didn't read properly and didn't select a plate with my case...

if you filled out the form properly you should have an email with your responses and a link to edit them

(unless it's closed in which case you're doing the right thing)
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | MIRA SE | TGR Alice | Daily driver: TGR Alice

Everything you have said in the past has been false so I will keep my hope.

Offline keimura

  • Posts: 8
  • Location: USA
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - Open Now
« Reply #15 on: Tue, 16 April 2019, 11:20:17 »
I would like to add another case and also double check that I filled out the form correctly. I have a feeling that I didn't read properly and didn't select a plate with my case...

if you filled out the form properly you should have an email with your responses and a link to edit them

(unless it's closed in which case you're doing the right thing)

Thanks! I checked and yeah I did forget to choose a plate to go with my case...

Offline tunadesu

  • Posts: 167
  • Location: MA
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - Open Now
« Reply #16 on: Tue, 16 April 2019, 12:58:54 »
Missed it, dope  :rolleyes:

Offline ThePanduuh

  • Posts: 11
  • Location: Pennsylvania, USA
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - Open Now
« Reply #17 on: Tue, 16 April 2019, 23:16:39 »
Ordered two. One to match Red Riot when I finally get my sets, the other for the matte black aesthetic.
fancy seeing you here. I see you picked 2 of these up, 2 of these will still cost you less than the UHMW one. admit it, you too like cheap Alice ;) I'm stoked for this as soon as I saw the files Zambu put up I started doing research then this just makes it all easier I don't have to waste moneys on acrylic to find out how to laser cut it. it's done for me :D This is the real budget Alice we all need.

Offline KawabataLuis

  • Posts: 64
  • Location: Brazil
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - Open Now
« Reply #18 on: Wed, 17 April 2019, 15:40:14 »
Sad I missed this. Got really interested but forgot to check out. If anytime there will be extras or extra rounds, I'll be quite excitingly waiting.

Offline p_blaze

  • Posts: 438
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - Open Now
« Reply #19 on: Wed, 17 April 2019, 22:44:32 »
damn, how did I miss this

I really wanted one of these bad boys

will there be extras?

Offline TuCZnak

  • Posts: 200
  • Location: Where ISO is the default (anywhere but USA)
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - Open Now
« Reply #20 on: Thu, 18 April 2019, 02:03:38 »
Goddamnit how is this closed already? It was supposed to last for a week, I really wanted in :(
MOQ means Minimum Order Quantity. You either reach it or you don't, there's no "pushing for higher MOQ", just pushing for more orders.

Online blizzara01

  • Posts: 116
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - Open Now
« Reply #21 on: Thu, 18 April 2019, 03:08:49 »
Goddamnit how is this closed already? It was supposed to last for a week, I really wanted in :(
Ends: 1 Week from NOW or when a limit is reached where I think it does not get out of control. (~100 kits)




Offline lanyusea

  • Posts: 302
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - Open Now
« Reply #22 on: Thu, 18 April 2019, 03:16:05 »
can non-step caps lock be a choice?

oops, didn't see it has already finished
HHKB Type-s / 4x KMAC Happy / 3x Duck Viper v1 / 2x Duck Viper v2 / Duck TCV3 / Red Scarf 77 / 2x Infinity 60 / 2x ALF HHKB / LZ-CE / 3x FMJ 60 / FJELL / Canoe / Canoe FE / ARES Prototype / 3x Ares / LC-CLSh / TX60 / YODA2 / E6-V2 / E6-V2 FE / Reborn 60 / QXP 60 / CAMP LC60 / 2x EM 7 / 4x Leaf 60 / UHK / Project F / WhiteFox R1/ Poker 3 / Plenty of keycaps

Offline TuCZnak

  • Posts: 200
  • Location: Where ISO is the default (anywhere but USA)
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - Open Now
« Reply #23 on: Thu, 18 April 2019, 04:51:36 »
Goddamnit how is this closed already? It was supposed to last for a week, I really wanted in :(
Ends: 1 Week from NOW or when a limit is reached where I think it does not get out of control. (~100 kits)

I can read, just didn't realize there would be such a demand :/
MOQ means Minimum Order Quantity. You either reach it or you don't, there's no "pushing for higher MOQ", just pushing for more orders.

Offline Dissitesuxba11s

  • Posts: 49
  • Location: The Silver
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - Open Now
« Reply #24 on: Thu, 18 April 2019, 09:53:52 »
Really wish I pulled the trigger when I initially saw this.

Hope it opens up again.

Offline p_blaze

  • Posts: 438
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - CLOSED
« Reply #25 on: Thu, 18 April 2019, 22:53:38 »
Personally, I just didn't know about this until it was too late. I really hope you decide to run a round 2 or open up for more orders, I really wanted to try an ergo board without breaking the bank.

Offline hammerbrotha

  • Posts: 42
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - CLOSED
« Reply #26 on: Fri, 19 April 2019, 13:32:58 »
Slept on this, hope you do another round!

Offline fanovorc

  • Posts: 7
  • Location: China
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - CLOSED
« Reply #27 on: Sat, 20 April 2019, 22:20:35 »
i missed it again, sad

Offline cucgach

  • Posts: 117
  • Location: Vietnam
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - CLOSED
« Reply #28 on: Mon, 22 April 2019, 13:02:26 »
never spot this GB.. hoping for R2 or even better open for more orders..
Current: Filco TKL Majestouch | TX60 antique brass | NIU40 silver | H360 burgundy | Rama M6-A | tr.mk wooden 60 | Imperial Hue 60 | Tofu 65 silver | Tofu WKL navy | TMO50 green/poly | HB85 black/gray | TX108se titan gray (unbuild)| Gergo Kit: black PCB (unbuild) | Space65 gray/silver | Typewriter68 ceramic white (unbuild)
Future: Think6.5 frost poly | VN66 E-White
Past: TinaC HHKB gray | TX84Se titan gray | Leopold 660M white | GSX96 R2 purple | Rama M60-A lake | 0.01 Z70 silver | E7-V1 MAO

Offline bball2

  • Posts: 203
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - CLOSED
« Reply #29 on: Wed, 24 April 2019, 16:14:59 »
Invoice received and paid!

Offline laserbeamspewpew

  • Posts: 159
  • Location: Brooklyn
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - CLOSED
« Reply #30 on: Thu, 25 April 2019, 17:02:23 »
Have all invoices been sent out? Haven’t received mine yet.

Offline dwarflemur

  • Posts: 107
  • Location: cali
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - CLOSED
« Reply #31 on: Thu, 25 April 2019, 19:36:04 »
Have all invoices been sent out? Haven’t received mine yet.

Me neither, I was assuming since they said it was going to be done in batches it would come later. I definitely got my order in toward the end.
Camp C225 | Norbatouch | ALF X2 + X3 | Orange TKL | CA66 | Leaf 60 | a bunch of others

Offline Gobluebro

  • Posts: 41
  • Location: United States
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - CLOSED
« Reply #32 on: Mon, 29 April 2019, 12:52:33 »
Just got my invoice! Very excited to see this

Offline gabbbe

  • Posts: 80
  • Location: Brooklyn, NY
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - CLOSED
« Reply #33 on: Mon, 29 April 2019, 12:54:48 »
Invoice paid :)


Sent from my iPhone using Tapatalk

Offline dwarflemur

  • Posts: 107
  • Location: cali
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - CLOSED
« Reply #34 on: Mon, 29 April 2019, 18:00:14 »
Just got/paid my invoice too!
Camp C225 | Norbatouch | ALF X2 + X3 | Orange TKL | CA66 | Leaf 60 | a bunch of others

Offline boog

  • Posts: 26
Re: [GB] Wonderland PCB & Lubrigante Acrylic Case - CLOSED
« Reply #35 on: Tue, 30 April 2019, 18:34:18 »
Invoice paid  :thumb:
Thanks!

Offline ItsAllen

  • Posts: 51
  • Location: South Florida
June, here we are. How are things looking?

Offline homerowco

  • Thread Starter
  • Posts: 79
June, here we are. How are things looking?

Best to keep updated on discord! :D

All things run pretty smoothly so far - clear acrylic production started today, will be done end of week or mon/tue next:



Still working on the color versions and frosted full size samples.

PCB will start production this week. So we still looking as planned around july for shipping.

No updates here cause there isn't really anything "big" to report since it's all running smooth.

On the other hand on discord I keep flooding people with small updates ;)
There have been a few streams of acrylic proto fitting of stabs etc. on twitch and an update on the full color LED cutouts but that's all small stuff really.

Offline Poesjuh

  • Posts: 425
  • Location: Netherlands - N-H
Imo small updates like "everything on track, doing x and y now" are better than no updates

Online The_Royal

  • Posts: 216
  • Location: 40% Embassy
  • That's what I call, a Sunday.
Imo small updates like "everything on track, doing x and y now" are better than no updates


Like he mentioned a few times, Join the discord! He’s on there almost everyday with information and discussions.

Sometimes hourly update lol

Offline Poesjuh

  • Posts: 425
  • Location: Netherlands - N-H
I am on the Discord... :P but I imagine not everyone being there since nowadays everybody and their mother has a channel :P

Offline Darknight00z

  • Posts: 596
  • Location: UK
.... nowadays everybody and their mother has a channel :P

Lol +1

Definitely agreed, im in all of the servers, but I rarely check them since there is just so much noise and other chitchat going on. Geekhack updates are just much cleaner.

Online The_Royal

  • Posts: 216
  • Location: 40% Embassy
  • That's what I call, a Sunday.
.... nowadays everybody and their mother has a channel :P

Lol +1

Definitely agreed, im in all of the servers, but I rarely check them since there is just so much noise and other chitchat going on. Geekhack updates are just much cleaner.

I can see that being an annoyance. But that’s what Pins are for, and he has a “non-discussion” update page within the main Homerow Co. Discord that he posts the important stuff.

 Doesn’t get bogged down with anything but updates.

Offline Poesjuh

  • Posts: 425
  • Location: Netherlands - N-H
Yeah well. Afaik one of the rules of posting a GB on GH is to have the main bulk of updates actually on here, not on a Discord. Plus, but this is just me, I'm not a fan of having 10+ Discord channels only to check up on updates scrolling through each one where one might have a main "update channel" but the others are a complete ****show of spam :P I personally prefer to have a quick 2 min glance here to see. But again, that's just me.

Offline homerowco

  • Thread Starter
  • Posts: 79
Definitely agreed, im in all of the servers, but I rarely check them since there is just so much noise and other chitchat going on. Geekhack updates are just much cleaner.

there's a dedicated updates channel where i post bigger updates and if someone needs to make a decision @everyone is used so you don't miss the important stuff :)


Yeah well. Afaik one of the rules of posting a GB on GH is to have the main bulk of updates actually on here, not on a Discord. Plus, but this is just me, I'm not a fan of having 10+ Discord channels only to check up on updates scrolling through each one where one might have a main "update channel" but the others are a complete ****show of spam :P I personally prefer to have a quick 2 min glance here to see. But again, that's just me.

that's okay then, the GB here was approved and published 3 or 4 days after the GB already ended and only after asking a not market related mod to approved it... so technically nobody "on GH" is in the GB anyway :P

also there is a dedicated update channel on the HR discord server which is read only, so no ****show of spam - see attachment :)

Offline homerowco

  • Thread Starter
  • Posts: 79
Here a quick rundown on updates posted in the dedicated update channel on Discord:

05/07/2019 UPDATE: I sent out payment reminders - let me know if you want to cancel please - we slowly need to prepare for mass purchase of acrylic! Yes, I know you want to see prototypes but I still need to know who's in and who isn't. PCB color also need to be set or as mentioned earlier you will default to BLACK.

05/09/2019 INFO: custom sized box prototype arrived today!

05/10/2019 UPDATE: ALPS plate orders will need to be switched to either MX, cancelled, or take a carbon fiber option I can offer at no additional cost as a curtesy for the confusion! Please message me ASAP if you're one of the 8 alps orders! Also check your inbox, you should have received a ticket from our helpdesk!

05/13/2019 UPDATE: reminder for the afternoon and evening side of the planet: GB INVOICE PERIOD IS ENDING - IF YOU HAVE NOT PAID YET AND NOT TOLD ME TO MARK YOU AS PAYING LATER: Your order will be cancelled tonight! Please let me know asap via discord or support@homerow.co if you want any further changes, want to cancel, or pay later! Also before you cancel or refund an order you already paid for via paypal, please try to find someone who wants to fill your spot or let me know ahead and I will find someone - PP now keep all the fees...  I rather have an exchange of money going directly vs losing the fees. Thanks!

05/14/2019 UPDATE: Exciting update! I finally managed, and it really took some self management, to ordered every single piece of of bumpons we need. :smiley:

05/16/2019 UPDATE: "Your invoices have been canceled." - All unpaid invoices if I was not otherwise notified are now cancelled.

05/23/2019 [LubWon GB][UPDATE]: Last final version wasn't a perfect fit for zeal/enjoypbt stabs so I made another version which is already with the laser guys waiting to be cut - acrylic sheets order for clear is already on its way.

05/29/2019 [LubWon GB][UPDATE]: Last last final final version was a perfect fit with zeal/gateron stabs! Production of easily available clear acrylic is starting this week!

Offline boog

  • Posts: 26
 :D  :thumb:

Offline homerowco

  • Thread Starter
  • Posts: 79
Small mid progress update: Clear acrylic plates are done.

Still need to produce the other 70% or plates and wait for the PCBs (3-6 weeks).
On the upside, cutting 30% of plates took 8 days and that included extreme temperature days with extended laser cool down breaks.

Offline ReDsNoTDeAd

  • Posts: 408
  • Location: Alberta, Canada
  • using keeb funds to make 3d printed gfs by 2022
Nice! Have you got any pics of the clear stuff? Curious to see how that's looking since I only have frosted acrylic things.

Offline bball2

  • Posts: 203
Update from the discord:

"material samples are cut - stream today or tomorrow for a closer look - first impression album here:"

https://imgur.com/a/t4JT4i0