[GB] TGR-Jane v2 CE (QC, Shipping) 99% completed

[yuktsi]

Those who didn't get an invoice, just me an email or PM over at Discord. I will check later. Sorry if I'd missed anyone.

It's almost 3 am here, I am hitting the bed. Thank you.

[MrCoolPants]

How would one check the timestamps again?

[Sushiimi]

Received my invoice and paying it now! Congrats to everyone who got in.

[Hadi]

How would one check the timestamps again?

Go to the email you received after completing the form and click "Show original" within the menu.

[lanyusea]

nah, no invoice, always missing thr TGR gb, hope can be luckier next time. :/

[LightningXI]

With so many people slamming the servers in such a short time, I feel like there could be some mix-ups between the stamped time and the order on the Google Sheet on yuktsi's side -- congrats to those who won

[Lormania]

Those who didn't get an invoice, just me an email or PM over at Discord. I will check later. Sorry if I'd missed anyone.

It's almost 3 am here, I am hitting the bed. Thank you.

!!! Good to know you will be getting some rest! Hope you don't wake up to too many messages.

[Zacharius]

How would one check the timestamps again?

You gotta check email headers


Sent from my iPhone using Tapatalk

[Randalljai]

Those who didn't get an invoice, just me an email or PM over at Discord. I will check later. Sorry if I'd missed anyone.

It's almost 3 am here, I am hitting the bed. Thank you.

is this for people within those 2 seconds?

[Zacharius]

How would one check the timestamps again?

You gotta check email headers


Sent from my iPhone using Tapatalk

But even then, there is no guarantee the time you are seeing is accurate. The only times that can be treated as gospel are those held by the form creator. 


Sent from my iPhone using Tapatalk

[Emir]

Got the invoice and paid! Todays a good day!

[Nigolski]

Paid! 

[Puddsy]

gmail takes a second or two to actually deliver the email, so you need to check the amount of time it took to deliver

that's where the discrepancy is

the time is the sent time, not the delivered time iirc

[packman86]

All of the world's Gmail experts gathered in one keyboard thread.

[megaforce]

Those who didn't get an invoice, just me an email or PM over at Discord. I will check later. Sorry if I'd missed anyone.

It's almost 3 am here, I am hitting the bed. Thank you.

can i tuck you in and kiss you goodnight?

[Furikurichemy]

Paid! Thanks Yuktsi 

[hineybush]

for whoever got these, I plan to do a run of 1.2mm thick PCBs and FR4 Full/Half plates probably in July/August.

[frostfiree]

for whoever got these, I plan to do a run of 1.2mm thick PCBs and FR4 Full/Half plates probably in July/August.

MVP!

[gitcommit]

paid! ty for hosting group buy!

[dondongler]

for whoever got these, I plan to do a run of 1.2mm thick PCBs and FR4 Full/Half plates probably in July/August.

Hubba hubba

[Ashardalon]

Those who didn't get an invoice, just me an email or PM over at Discord. I will check later. Sorry if I'd missed anyone.

It's almost 3 am here, I am hitting the bed. Thank you.

If I give you cookies and milk for when you wake up, I'll take an invoice in exchange 

[rkarp]

for whoever got these, I plan to do a run of 1.2mm thick PCBs and FR4 Full/Half plates probably in July/August.

What qualities would this add to the keeb?  And thank you for offering to do this!

[hineybush]

for whoever got these, I plan to do a run of 1.2mm thick PCBs and FR4 Full/Half plates probably in July/August.

What qualities would this add to the keeb?  And thank you for offering to do this!

you can further customize your custom keyboard

thinner PCB and fr4 is a good amount of flex, not sure how fr4 will compare to cf


Sent from my iPhone using Tapatalk

[stxfreak]

Okay, invoices are all sent! Thank you, guys  If you want to make any changes or confirm your order, I can be reached at Discord (yuktsi#9904) or yuktsi@ttggrr.cc

Looking forward to a potential R2 

Dont get your hopes up for an exact R2 though, it will differ again.

[JubJubCity]

for whoever got these, I plan to do a run of 1.2mm thick PCBs and FR4 Full/Half plates probably in July/August.

Hip Hip Hooray

[gMit]

Are we able to change or WK/WKL preference?

[tentboy]

for whoever got these, I plan to do a run of 1.2mm thick PCBs and FR4 Full/Half plates probably in July/August.

I should have bought more extra PCBs

[Zacharius]

for whoever got these, I plan to do a run of 1.2mm thick PCBs and FR4 Full/Half plates probably in July/August.

What is FR4? Reckon there may be different color options?


Sent from my iPhone using Tapatalk

[hineybush]

for whoever got these, I plan to do a run of 1.2mm thick PCBs and FR4 Full/Half plates probably in July/August.

What is FR4? Reckon there may be different color options?


Sent from my iPhone using Tapatalk

same material PCBs are made from. colors dependent on what i feel like doing


Sent from my iPhone using Tapatalk

[jwangabanggg]

Paid! ty for the group buy <3

[superdoedoe]

Hiney the God

Sent from my SM-G970F using Tapatalk

[rainb1ood]

Paid! This will be my first TGR board

[krazikake]

Today is a guuud day....

[xine007]

for whoever got these, I plan to do a run of 1.2mm thick PCBs and FR4 Full/Half plates probably in July/August.

What qualities would this add to the keeb?  And thank you for offering to do this!

you can further customize your custom keyboard

thinner PCB and fr4 is a good amount of flex, not sure how fr4 will compare to cf


Sent from my iPhone using Tapatalk

Nice! I'm curious about that FR4 too.

[Ahngel]

Paid! 

[tentboy]

already planning my build im too hyped

[click clack jack]

Paid!!!! SOoooooo happy

[renzpwns]

Paid  Also based hiney coming in hot with the thinboi pcbs. I'm gonna be swimming with pcbs at this point.

[knazze]

Invoice received and paid! Thanks yuktsi

[kconfire]

for whoever got these, I plan to do a run of 1.2mm thick PCBs and FR4 Full/Half plates probably in July/August.

Hip Hip Hooray

I'm in for those 

[o3okevin]

good stuff! can't wait to see this in person

[dantambok]

We going to heaven bois

[AlcoholEnthusiast]

for whoever got these, I plan to do a run of 1.2mm thick PCBs and FR4 Full/Half plates probably in July/August.

Nice, I've been meaning to try a thin PCB/half plates.

[megaforce]

Church of TGRology

Ａｍｉｔāｂｈａ Ａｍｉｄａｌａ － Ｈｅａｖｅｎ＇ｓ Ｈｏｌｅ

[DJSnotBoogie]

Paid! This will be my first TGR board

You won’t be disappointed

[pr0ximity]

All of the world's Gmail experts gathered in one keyboard thread.

Should check some of the old Clack therapy discussooms around his old sales lol.

I have a Hotmail email address solely to cut down on transmit time to his Hotmail address 😂

[ejewell89]

my timestamp i think was 5 seconds. but i had an invoice so /shrug

[swangful]

my timestamp i think was 5 seconds. but i had an invoice so /shrug

 

[ejewell89]

my timestamp i think was 5 seconds. but i had an invoice so /shrug

 

to be fair i'm kinda dumb when it comes to computer stuff. 

Everytime I try to program a qmk i have so much trouble. 

but when it comes to filling forms fast. that i can do. (artisan raffle training)

might have read something wrong

[Chimera]

if anyone wants to organize a brass plate buy for this, I'd be down for one.