Author Topic: [IC] Aluminium ISO Enter Keycaps  (Read 1027 times)

0 Members and 1 Guest are viewing this topic.

Offline CAPS UNLOCKED

  • Thread Starter
  • Posts: 418
  • Location: United Kingdom
    • capsunlocked
[IC] Aluminium ISO Enter Keycaps
« on: Wed, 08 May 2019, 11:39:07 »
Aluminium ISO Enter Keycaps

Ever wanted an Aluminium, Cherry Profile, ISO Enter Key? Well now is your chance to get one. This is an interest check for Aluminium, Cherry Profile, ISO Enter keys available in either Grey or Black. Each keycap supports switches with Cherry MX stems and although the keycap does not support any stabilisers underneath the Enter Key, there is enough space for them under the keycap.

218854-0
218856-1
218858-2
218860-3

Profile: Cherry

Colours

Black and Grey

Price


25 - 49 Units: 29.16(ex-VAT), 34.99(inc-VAT)

50-99 Units:  24.16(ex-VAT), 28.99(inc-VAT)

100+ Units:  19.16 (ex-VAT), 22.99 (inc-VAT)


Minimum Order Quantity

25 for Each Colour

Notes

There won't be any legends on these keycaps, they will be blank.

Store Page

https://caps-unlocked.com/aluminium-iso-enter-key/

------------------------------------------

https://twitter.com/caps_unlocked // https://www.instagram.com/caps_unlocked/

------------------------------------------

https://caps-unlocked.com


« Last Edit: Wed, 08 May 2019, 12:20:43 by CAPS UNLOCKED »

Online lolafineday

  • Posts: 117
Re: [IC] Aluminium ISO Enter Keycaps
« Reply #1 on: Wed, 08 May 2019, 11:40:43 »
Ne ansi avail?


Sent from my iPhone using Tapatalk

Offline AuthenticDanger

  • Posts: 298
Re: [IC] Aluminium ISO Enter Keycaps
« Reply #2 on: Wed, 08 May 2019, 12:18:50 »
ne stabilizer stems avail?
F Keys belong on the left.

Offline CAPS UNLOCKED

  • Thread Starter
  • Posts: 418
  • Location: United Kingdom
    • capsunlocked
Re: [IC] Aluminium ISO Enter Keycaps
« Reply #3 on: Wed, 08 May 2019, 12:23:38 »
Ne ansi avail?


Sent from my iPhone using Tapatalk

No, at the moment we have not designed an ANSI Enter Keycap.

ne stabilizer stems avail?

The original model had stabiliser stems but they were removed as the lower stem created a really small angle between itself and the wall and so the factory told us that they couldn't create it.


Offline AuthenticDanger

  • Posts: 298
Re: [IC] Aluminium ISO Enter Keycaps
« Reply #4 on: Wed, 08 May 2019, 12:44:03 »
ne stabilizer stems avail?

The original model had stabiliser stems but they were removed as the lower stem created a really small angle between itself and the wall and so the factory told us that they couldn't create it.

What model did you use for this?
F Keys belong on the left.

Offline CAPS UNLOCKED

  • Thread Starter
  • Posts: 418
  • Location: United Kingdom
    • capsunlocked
Re: [IC] Aluminium ISO Enter Keycaps
« Reply #5 on: Wed, 08 May 2019, 12:46:47 »
ne stabilizer stems avail?

The original model had stabiliser stems but they were removed as the lower stem created a really small angle between itself and the wall and so the factory told us that they couldn't create it.

What model did you use for this?

This is just a standard Cherry Profile Keycap but the standard stem has too be opened up as you can't CNC the inside of a standard stem. Once you open up the stem however, the wall of the stem gets too close to the lower keycap wall.

Offline AuthenticDanger

  • Posts: 298
Re: [IC] Aluminium ISO Enter Keycaps
« Reply #6 on: Wed, 08 May 2019, 12:48:07 »
ne stabilizer stems avail?

The original model had stabiliser stems but they were removed as the lower stem created a really small angle between itself and the wall and so the factory told us that they couldn't create it.

What model did you use for this?

This is just a standard Cherry Profile Keycap but the standard stem has too be opened up as you can't CNC the inside of a standard stem. Once you open up the stem however, the wall of the stem gets too close to the lower keycap wall.

I meant who modeled the keycap. There are certainly ways to engage the stabilizers without "traditional" stem design.
F Keys belong on the left.

Offline ChrisSwires

  • Posts: 144
Re: [IC] Aluminium ISO Enter Keycaps
« Reply #7 on: Wed, 08 May 2019, 12:52:00 »
Agree with above, I'd argue they're likely unusable without the stabiliser support.

Sent from my Pixel 3 using Tapatalk


Offline CAPS UNLOCKED

  • Thread Starter
  • Posts: 418
  • Location: United Kingdom
    • capsunlocked
Re: [IC] Aluminium ISO Enter Keycaps
« Reply #8 on: Wed, 08 May 2019, 12:55:10 »
ne stabilizer stems avail?

The original model had stabiliser stems but they were removed as the lower stem created a really small angle between itself and the wall and so the factory told us that they couldn't create it.

What model did you use for this?

This is just a standard Cherry Profile Keycap but the standard stem has too be opened up as you can't CNC the inside of a standard stem. Once you open up the stem however, the wall of the stem gets too close to the lower keycap wall.

I meant who modeled the keycap. There are certainly ways to engage the stabilizers without "traditional" stem design.

Agree with above, I'd argue they're likely unusable without the stabiliser support.

Sent from my Pixel 3 using Tapatalk



The design hasn't been finalised and we can take another look at stabiliser stems. I launched this IC as I had been sitting on this idea for a while, but nobody else had done it and I wondered if there even was any interest in Aluminium ISO Enter Keys. Thanks for the feedback!

Offline ChrisSwires

  • Posts: 144
Re: [IC] Aluminium ISO Enter Keycaps
« Reply #9 on: Wed, 08 May 2019, 12:57:40 »
ne stabilizer stems avail?

The original model had stabiliser stems but they were removed as the lower stem created a really small angle between itself and the wall and so the factory told us that they couldn't create it.

What model did you use for this?

This is just a standard Cherry Profile Keycap but the standard stem has too be opened up as you can't CNC the inside of a standard stem. Once you open up the stem however, the wall of the stem gets too close to the lower keycap wall.

I meant who modeled the keycap. There are certainly ways to engage the stabilizers without "traditional" stem design.

Agree with above, I'd argue they're likely unusable without the stabiliser support.

Sent from my Pixel 3 using Tapatalk



The design hasn't been finalised and we can take another look at stabiliser stems. I launched this IC as I had been sitting on this idea for a while, but nobody else had done it and I wondered if there even was any interest in Aluminium ISO Enter Keys. Thanks for the feedback!
With stabiliser support, great idea, and will pair well with some of those iso macropads in the works!

Sent from my Pixel 3 using Tapatalk


Offline InvidiousIgnoramus

  • Posts: 295
  • Location: Columbia, SC
Re: [IC] Aluminium ISO Enter Keycaps
« Reply #10 on: Wed, 08 May 2019, 13:13:56 »
The design hasn't been finalised and we can take another look at stabiliser stems. I launched this IC as I had been sitting on this idea for a while, but nobody else had done it and I wondered if there even was any interest in Aluminium ISO Enter Keys. Thanks for the feedback!
With the upcoming influx of ISO Enter macropads, I'm certainly interested. That is, if shipping is reasonable to the US.
I long for the day when I find a beamspring. (At a not insane price)

Offline Daggerfall

  • Posts: 27
  • Location: Copenhagen
Re: [IC] Aluminium ISO Enter Keycaps
« Reply #11 on: Wed, 08 May 2019, 13:19:26 »
Very interested!

Offline jonowarren94

  • Posts: 13
Re: [IC] Aluminium ISO Enter Keycaps
« Reply #12 on: Wed, 08 May 2019, 14:14:34 »
Interested if it has stab support

Offline w3bb0

  • Posts: 10
Re: [IC] Aluminium ISO Enter Keycaps
« Reply #13 on: Wed, 08 May 2019, 15:10:24 »
Sign me up!

Sent from my ONEPLUS A5010 using Tapatalk


Offline Atlantic

  • Posts: 4
Re: [IC] Aluminium ISO Enter Keycaps
« Reply #14 on: Wed, 08 May 2019, 15:20:56 »
I'd be down if stab support

Offline RETURNISO

  • Posts: 411
  • Location: [ NOR ] ISO
  • I do get excited about keyboard stuff..
Re: [IC] Aluminium ISO Enter Keycaps
« Reply #15 on: Wed, 08 May 2019, 15:50:13 »
Nice nice, nice.

But need:

Offline ab042896

  • Posts: 5
Re: [IC] Aluminium ISO Enter Keycaps
« Reply #16 on: Wed, 08 May 2019, 16:27:29 »
Interested for sure, but stabilizers will make or break this for me