Author Topic: [GB] Syruplabs X CRP UPDATE: CRP2.2 WILL BE USING R3 MOLDS (IN PRODUCTION)  (Read 23412 times)

0 Members and 1 Guest are viewing this topic.

Offline liangalv

  • Thread Starter
  • Posts: 31
Syruplabs has partnered up with Hammerworks to present a re-run of the sets from R2.

These keysets feature classic colourways based on vintage keyboards or manufacturers.
Hammer uses thick PBT keycaps and crisp dye-subbing to present the vibrant red APL sublegends, deep blue Arabic sublegends, colourful Tulip keys and orange DESKO keys.
 Join the GB and be entered in a buyer's giveaway for an additional base set of choice.

update: Of all the R2.2 runs that are going on in various regions we have been told by Hammer that ours is scheduled to ship before the CNY (Early-mid January).
QC should last about a month so expect shipping in February at that rate or earlier.

update 25/10/2019: CRP2.2 will be using R3 Molds which implement tighter tolerances and reduce greatly the risk of twisted stems!!!!

The major differences from the previous R2 run are:
All prices are in CAD and includes all appropriate fees.
-Arabic set on R2 Molds
-a 65/75% compatibility kit
-a 1800 compatibility kit

If you are interested please join here: https://forms.gle/vNs8H4wceVqinTQw6

We will also running a giveaway for a base set on Reddit: https://www.reddit.com/r/mechmarket/comments/djtbn2/gb_giveaway_and_crp_r22_update/


All prices are in CAD and includes all appropriate fees.

Set                      Price
APL                      $138 CAD
228403-0
DESKO              $118 CAD
228407-1
Peacock              $138 CAD
228409-2
Tulip                      $118 CAD
228411-3
Arabic              $168 CAD
228405-4
Number Pad      $41 CAD
228417-5
Cherry Keys (note: a R5 1U 0 key will be included)   $21 CAD
228423-6
R5 Kit              $16 CAD
228415-7
Window Keys      $21 CAD
228421-8
WKL Keys              $18 CAD
228413-9
HHKB Keys (note: we have confirmed with Hammer that this set will include a mod-coloured delete key alongside the alpha-coloured delete key)   $16 CAD
228419-10
65/75% Compatibility Kit   $15 CAD
228425-11
1800 Compatibility Kit   $25 CAD
228427-12
EU Novelties      $32 CAD
228429-13



GB will be open until the end of the month. Invoices must be paid by November 1st. (timezone=EST)



FAQs

Q: What if I filled in the form earlier and lost my editing link or cannot edit my form?

A: Just fill out a new form I will delete your previous entries.


Q: Is there ISO support?

A: No it will not be offered this round.


Q: Where can I contact you guys?

A: hello@syruplabs.ca, reddit, or discord. You can join our discord here (https://discord.gg/rNTVtJC). We are generally most responsive on discord > reddit > e-mails.


Q: Is this group buy legit?

A: If you are skeptical about the legitimacy of the group buy you can find our authorization signed by hammer here(https://imgur.com/a/CsHVZzh) and on the front page of the form.


Q: How long is the GB open for? When are you going to ship?

A: The GB will be open until the end of the month. Estimated shipping is 3 months after we send payment (~end of January/Beginning of February).


Q: Why is the Arabic Base Set so much more expensive than the other sets?

A: After talking with Hammer the Arabic dye-subs originally including sub-legends on the numpad and various other keys as well. So the Base set is not only the TKL layout offered in the other base sets but also the numpad, wkl, and r5 kits that are dye-subbed in respect to the set.


Q: What happens if my keycaps are bad after receiving them?

A: The plan we agreed upon with Hammer is to collect all the sets that have quality issues and send them back to him for replacements. We will not cover return shipping. The goal is to catch any major quality issues during the initial QC phase and not send those out. So we hope that this will not become a prominent issue with the buy.


Q: Can I change my order?

A: If you have paid your invoice and want to add items we can send you another invoice for those items. If you have paid your invoice and are removing items or want a refund. We will charge a 5% re-stocking fee due to changes in the paypal policy. In general, please be sure of your order before you pay the invoice.


Q: Will you underdeclare for orders going to __?

A: Our official answer is that we will not underdeclare any of the products we sell. We are a registered Canadian business and we must comply to our regulations.


Q: I had a bad set from R2/R1 (some previous run), can I go through you guys to get them replaced?

A: Our stance on any previous group buys is that we will not pursue concerns or questions from previous group buys. It may seem unfair from the buyer's perspective but we do not feel particularly responsible for issues in buys that we were not apart of. If we were to pursue any concerns or questions from previous GBs it would bog down our current run. We want to give our best efforts in dealing with and running our current GB. It would be unfair to our participants and us to deal with previous issues. We are sorry if this stance is not satisfactory. We hope you and the others who have asked will resolve these issues.

Sincerely,

Syrup Labs.
« Last Edit: Thu, 28 November 2019, 13:54:07 by liangalv »

Offline Fnzzy

  • Posts: 616
  • Location: Germany
Re: [GB] Syruplabs X CRP
« Reply #1 on: Sun, 20 October 2019, 11:49:07 »
Already joined a couple of days ago. Can't wait for some APL goodness.
Duck Viper | Duck Orion v2 | LZ CLS | J80 | Acrylic Tofu

Offline Nigolski

  • Posts: 171
  • Location: Helsinki
Re: [GB] Syruplabs X CRP
« Reply #2 on: Sun, 20 October 2019, 12:14:01 »
joined
HHKB Pro 1

Offline ideus

  • * Exalted Elder
  • Posts: 7660
  • Location: In the middle of nowhere.
  • Björkö.
Re: [GB] Syruplabs X CRP
« Reply #3 on: Sun, 20 October 2019, 12:18:14 »
Sorry guys, but I ain't able to find any link to the GB page. Am I misreading something?

Offline SleepIsAllINeed

  • Posts: 37
  • Location: Toronto, Ontario
Re: [GB] Syruplabs X CRP
« Reply #4 on: Sun, 20 October 2019, 12:25:47 »
Form is here https://forms.gle/vNs8H4wceVqinTQw6

Sent from my Pixel 3 using Tapatalk


Offline Fredington

  • Posts: 132
Re: [GB] Syruplabs X CRP
« Reply #5 on: Sun, 20 October 2019, 12:35:09 »
Will desko come with the colored modifiers shown in the photo?

Offline liangalv

  • Thread Starter
  • Posts: 31
Re: [GB] Syruplabs X CRP
« Reply #6 on: Sun, 20 October 2019, 12:38:17 »
Will desko come with the colored modifiers shown in the photo?
Sorry, that will not be the case

Offline mydens

  • Posts: 22
Re: [GB] Syruplabs X CRP
« Reply #7 on: Sun, 20 October 2019, 12:47:52 »
I'm confused.........what are the differences between the main kits?? can we get a detail breakdown?

Offline liangalv

  • Thread Starter
  • Posts: 31
Re: [GB] Syruplabs X CRP
« Reply #8 on: Sun, 20 October 2019, 12:53:31 »
I'm confused.........what are the differences between the main kits?? can we get a detail breakdown?
if you expand into the images or if you go into the google form, you'll find that each base set has different sub-legends that differentiate them from one another

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11317
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] Syruplabs X CRP
« Reply #9 on: Sun, 20 October 2019, 13:20:39 »
this is unexpected but welcome
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos

Offline juliandoucette

  • Posts: 56
Re: [GB] Syruplabs X CRP
« Reply #10 on: Sun, 20 October 2019, 13:58:50 »
Why no plain legends?

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11317
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] Syruplabs X CRP
« Reply #11 on: Sun, 20 October 2019, 14:07:51 »
Why no plain legends?

these are reproductions of hard to find vintage sets
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos

Offline LightningXI

  • * Elevated Elder
  • Posts: 3012
  • Location: New York
  • PPD
    • ArtisanMacro
Re: [GB] Syruplabs X CRP
« Reply #12 on: Sun, 20 October 2019, 21:34:07 »
Will desko come with the colored modifiers shown in the photo?

Nope
WANTED: Clacks, Artisans, Keysets, Vintage Cherry and Other Goodies

More
Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60 | Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | IBM 3278 (pending restoration) | KFE | TGR Jane v2 | TGR Jane v2 CE | Koala | iS0 | Norbatouch | KPad | Xeno | F62 Kishsaver | Keycult No.1/60 Rev. 1 | GSKT-00 Z | Jubi | Montage


Offline mellen

  • Posts: 32
  • Location: California
Re: [GB] Syruplabs X CRP
« Reply #13 on: Sun, 20 October 2019, 21:37:41 »
got peacock :thumb:

Offline Xantus

  • Posts: 22
Re: [GB] Syruplabs X CRP
« Reply #14 on: Mon, 21 October 2019, 10:49:59 »
Enjoypbt or BSP?

Offline nickheller

  • Cherry ML life
  • * Destiny Supporter
  • Posts: 1594
  • Location: Earth
Re: [GB] Syruplabs X CRP
« Reply #15 on: Mon, 21 October 2019, 10:59:40 »
Why no plain legends?
Would also love to see this done in CRP.  :'(
Gotcha. Those sacks look mouth watering.

Offline ideus

  • * Exalted Elder
  • Posts: 7660
  • Location: In the middle of nowhere.
  • Björkö.
Re: [GB] Syruplabs X CRP
« Reply #16 on: Mon, 21 October 2019, 11:11:26 »
Double check: Are these L9 and CR color compatible, right?

Offline SleepIsAllINeed

  • Posts: 37
  • Location: Toronto, Ontario
Re: [GB] Syruplabs X CRP
« Reply #17 on: Mon, 21 October 2019, 11:16:36 »
Very similar but not an exact match as GMK is not the manufacturer

Sent from my Pixel 3 using Tapatalk


Offline ideus

  • * Exalted Elder
  • Posts: 7660
  • Location: In the middle of nowhere.
  • Björkö.
Re: [GB] Syruplabs X CRP
« Reply #18 on: Mon, 21 October 2019, 11:49:51 »
Very similar but not an exact match as GMK is not the manufacturer

Sent from my Pixel 3 using Tapatalk
I have some ePBT caps along with OG Cherry ones and they match quite well. Are these close to ePBT?

Offline SleepIsAllINeed

  • Posts: 37
  • Location: Toronto, Ontario
Re: [GB] Syruplabs X CRP
« Reply #19 on: Mon, 21 October 2019, 12:50:43 »
Not my picture. https://imgur.com/sLvBsbC. Left show a L9 spacebar kit from the OG Spacebars. And the right shows the spacebar from CRP. Hope this helps.

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11317
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] Syruplabs X CRP
« Reply #20 on: Mon, 21 October 2019, 16:16:35 »
Enjoypbt or BSP?

neither, it's CRP

BSP is dead anyway
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos

Offline cemoon

  • Posts: 46
Re: [GB] Syruplabs X CRP
« Reply #21 on: Mon, 21 October 2019, 16:22:45 »
I filled the form and got my invoice but it didn't have EU Novelties Kits in the form by the time I did. How can I add it to my order?
« Last Edit: Mon, 21 October 2019, 16:26:04 by cemoon »

Offline ideus

  • * Exalted Elder
  • Posts: 7660
  • Location: In the middle of nowhere.
  • Björkö.
Re: [GB] Syruplabs X CRP
« Reply #22 on: Mon, 21 October 2019, 16:28:04 »
Not my picture. https://imgur.com/sLvBsbC. Left show a L9 spacebar kit from the OG Spacebars. And the right shows the spacebar from CRP. Hope this helps.
It definitely helps. Thank you very much. I will give it a try as I will get a couple of HHKB sets to mix with my current OG / GMK / ePBT materials. Hopes that the mods match a bit better than the base caps that looks darker than Cherry, at least in the picture.

Offline catamscott

  • Posts: 135
  • Location: Oregon
Re: [GB] Syruplabs X CRP
« Reply #23 on: Mon, 21 October 2019, 20:35:51 »
Very similar but not an exact match as GMK is not the manufacturer

Sent from my Pixel 3 using Tapatalk
I have some ePBT caps along with OG Cherry ones and they match quite well. Are these close to ePBT?

not the best picture, but here's a comparison of epbt 9009 (with spacebar from epbt grayscale) and crp tulip. they're close, but crp has a yellowish tint to it
https://i.imgur.com/gfNX7gF.jpg

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11317
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] Syruplabs X CRP
« Reply #24 on: Mon, 21 October 2019, 23:29:13 »
I filled the form and got my invoice but it didn't have EU Novelties Kits in the form by the time I did. How can I add it to my order?

send a PM to the OP, or fill out a new form
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos

Offline SleepIsAllINeed

  • Posts: 37
  • Location: Toronto, Ontario
Re: [GB] Syruplabs X CRP UPDATE: CRP2.2 WILL BE USING R3 MOLDS
« Reply #25 on: Fri, 25 October 2019, 20:42:32 »
 :eek: New Molds.

Offline EST4R

  • Posts: 2
Re: [GB] Syruplabs X CRP UPDATE: CRP2.2 WILL BE USING R3 MOLDS
« Reply #26 on: Fri, 25 October 2019, 20:44:29 »
Final week

Offline ideus

  • * Exalted Elder
  • Posts: 7660
  • Location: In the middle of nowhere.
  • Björkö.
Re: [GB] Syruplabs X CRP
« Reply #27 on: Fri, 25 October 2019, 21:20:57 »
Very similar but not an exact match as GMK is not the manufacturer

Sent from my Pixel 3 using Tapatalk
I have some ePBT caps along with OG Cherry ones and they match quite well. Are these close to ePBT?

not the best picture, but here's a comparison of epbt 9009 (with spacebar from epbt grayscale) and crp tulip. they're close, but crp has a yellowish tint to it
https://i.imgur.com/gfNX7gF.jpg
Excellent example. Exactly the comparison that I need. I have set my small order and I should pay it pretty soon.  :thumb:

Offline Thock

  • Posts: 1
Re: [GB] Syruplabs X CRP UPDATE: CRP2.2 WILL BE USING R3 MOLDS
« Reply #28 on: Sun, 27 October 2019, 16:48:32 »
R3 molds? that's great news!

Offline catamscott

  • Posts: 135
  • Location: Oregon
Re: [GB] Syruplabs X CRP UPDATE: CRP2.2 WILL BE USING R3 MOLDS
« Reply #29 on: Sun, 27 October 2019, 19:19:10 »
loved the r2 molds i (ostensibly) received through the drop gb, super excited to see how they improve!

Offline Remsky

  • Posts: 289
  • Location: Portland, OR
  • Lubed switch count > Puddsy post count
Re: [GB] Syruplabs X CRP UPDATE: CRP2.2 WILL BE USING R3 MOLDS
« Reply #30 on: Tue, 29 October 2019, 11:10:14 »
If we paid our invoice, is it too late to add a set to our order?

Offline liangalv

  • Thread Starter
  • Posts: 31
Re: [GB] Syruplabs X CRP UPDATE: CRP2.2 WILL BE USING R3 MOLDS
« Reply #31 on: Tue, 29 October 2019, 11:12:17 »
If we paid our invoice, is it too late to add a set to our order?

best way to handle a situation like this is to pm us the details of your oder on discord and we’ll handle it directly :)

Offline Dreamre

  • Posts: 856
  • Location: Canada
    • kbdlife
Re: [GB] Syruplabs X CRP UPDATE: CRP2.2 WILL BE USING R3 MOLDS
« Reply #32 on: Tue, 29 October 2019, 12:32:47 »
What is the name of your Canadian business :)?

Offline liangalv

  • Thread Starter
  • Posts: 31
Re: [GB] Syruplabs X CRP UPDATE: CRP2.2 WILL BE USING R3 MOLDS
« Reply #33 on: Tue, 29 October 2019, 12:34:28 »
What is the name of your Canadian business :)?
Syruplabs ;)

Offline terrad

  • Posts: 34
Re: [GB] Syruplabs X CRP UPDATE: CRP2.2 WILL BE USING R3 MOLDS
« Reply #34 on: Tue, 29 October 2019, 22:13:02 »
Will you be proxying R3 as well?


Sent from my SM-G955F using Tapatalk


Offline liangalv

  • Thread Starter
  • Posts: 31
Re: [GB] Syruplabs X CRP UPDATE: CRP2.2 WILL BE USING R3 MOLDS
« Reply #35 on: Wed, 30 October 2019, 00:06:48 »
Will you be proxying R3 as well?


Sent from my SM-G955F using Tapatalk

Unfortunately that has not been confirmed, I believe MD (Drop) will be running R3 before any other vendor, so look out for that :)

Offline ideus

  • * Exalted Elder
  • Posts: 7660
  • Location: In the middle of nowhere.
  • Björkö.
Re: [GB] Syruplabs X CRP UPDATE: CRP2.2 WILL BE USING R3 MOLDS
« Reply #36 on: Wed, 30 October 2019, 10:14:15 »
Is Tulip going to be like this?



Offline SleepIsAllINeed

  • Posts: 37
  • Location: Toronto, Ontario
Re: [GB] Syruplabs X CRP UPDATE: CRP2.2 WILL BE USING R3 MOLDS
« Reply #37 on: Wed, 30 October 2019, 10:19:34 »
No that's Tulip GK from R1.

Sent from my Pixel 3 using Tapatalk


Offline ideus

  • * Exalted Elder
  • Posts: 7660
  • Location: In the middle of nowhere.
  • Björkö.
Re: [GB] Syruplabs X CRP UPDATE: CRP2.2 WILL BE USING R3 MOLDS
« Reply #38 on: Wed, 30 October 2019, 10:22:20 »
No that's Tulip GK from R1.

Sent from my Pixel 3 using Tapatalk
It is a shame, would rock if it were like that.

Offline ideus

  • * Exalted Elder
  • Posts: 7660
  • Location: In the middle of nowhere.
  • Björkö.
Re: [GB] Syruplabs X CRP UPDATE: CRP2.2 WILL BE USING R3 MOLDS
« Reply #39 on: Thu, 31 October 2019, 08:31:17 »
Order paid on time. Thank you very much for running this. I always wanted some of those nice EU Novelties. This is my chance, maybe the only one, to get them.  :thumb:

Offline cinema

  • Posts: 7
  • Location: Indiana
Re: [GB] Syruplabs X CRP UPDATE: CRP2.2 WILL BE USING R3 MOLDS
« Reply #40 on: Sat, 02 November 2019, 15:35:14 »
Any way I could possibly still get in for an HHKB + WKL set?

Offline ideus

  • * Exalted Elder
  • Posts: 7660
  • Location: In the middle of nowhere.
  • Björkö.
Re: [GB] Syruplabs X CRP UPDATE: CRP2.2 WILL BE USING R3 MOLDS (IN PRODUCTION)
« Reply #41 on: Mon, 13 January 2020, 15:45:00 »
What is the current status of the GB?

Offline DukeEsquire

  • Posts: 279
Re: [GB] Syruplabs X CRP UPDATE: CRP2.2 WILL BE USING R3 MOLDS (IN PRODUCTION)
« Reply #42 on: Mon, 13 January 2020, 15:50:04 »
What is the current status of the GB?

They've been posting updates on Discord.

Latest update:

2020-01-13 Update

- Production is going and should be done before CNY (Jan 25th) however it's going to cut it close.
- Hammer has given us 2 shipping dates either Jan 20th or February the 8th
- February the 8th is after CNY and this was given in the case where they are not done packaging before CNY
- A delay is not ideal but shouldn't put us behind schedule and if it does then not too far behind (~ 1-2 weeks)
- Expect shipping to you sometime in mid-late February depending on when it's shipped to us. We will announce what's happening with extras in the future.

Offline ideus

  • * Exalted Elder
  • Posts: 7660
  • Location: In the middle of nowhere.
  • Björkö.
Re: [GB] Syruplabs X CRP UPDATE: CRP2.2 WILL BE USING R3 MOLDS (IN PRODUCTION)
« Reply #43 on: Mon, 13 January 2020, 15:54:12 »
What is the current status of the GB?

They've been posting updates on Discord.

Latest update:

2020-01-13 Update

- Production is going and should be done before CNY (Jan 25th) however it's going to cut it close.
- Hammer has given us 2 shipping dates either Jan 20th or February the 8th
- February the 8th is after CNY and this was given in the case where they are not done packaging before CNY
- A delay is not ideal but shouldn't put us behind schedule and if it does then not too far behind (~ 1-2 weeks)
- Expect shipping to you sometime in mid-late February depending on when it's shipped to us. We will announce what's happening with extras in the future.

You are so kind to re-post it here, thank you very much. My discord account sucks.

Offline SleepIsAllINeed

  • Posts: 37
  • Location: Toronto, Ontario
Re: [GB] Syruplabs X CRP UPDATE: CRP2.2 WILL BE USING R3 MOLDS (IN PRODUCTION)
« Reply #44 on: Mon, 20 January 2020, 00:06:44 »
2020-01-20 Update
- Hammer has informed us that most of his workers have already left for CNY so we're looking at a February ship date
- Not ideal but it is what it is.
- Starting on Feb 3rd we'll be adopting a once a week (this was planned in the case of delays) update until it's been received by us (which can range from a non-update to it's shipped!)
- Next scheduled update will be Feb 3rd.

Offline SleepIsAllINeed

  • Posts: 37
  • Location: Toronto, Ontario
Re: [GB] Syruplabs X CRP UPDATE: CRP2.2 WILL BE USING R3 MOLDS (IN PRODUCTION)
« Reply #45 on: Wed, 29 January 2020, 20:20:22 »
Early Announcement 2020-01-29
- We are delayed  :(
- Hammer is located in Guangdong Province so they will not be able continue manufacturing/packaging because the province has issued an order for all businesses in the province to close until Feb 9th. We expected them back on Feb 1st but at this rate the earliest shipment to us would be sometime in March assuming no more delays.
- Obviously not ideal but considering the situation in China I don't believe we're the only the GB being affected
- Sorry for the inconvenience and we'll be sure to keep up a line of communication
- Next scheduled update will be on Feb 17 (should have been on the 10th but best case scenario they would have only been back one day)

Offline ideus

  • * Exalted Elder
  • Posts: 7660
  • Location: In the middle of nowhere.
  • Björkö.
Re: [GB] Syruplabs X CRP UPDATE: CRP2.2 WILL BE USING R3 MOLDS (IN PRODUCTION)
« Reply #46 on: Thu, 30 January 2020, 05:40:06 »
2019-nCoV new cases have been reported at Guangdong. We can wait as much as needed. Health is first.

Offline 3ambutter

  • Posts: 15
Any updates?

Offline SleepIsAllINeed

  • Posts: 37
  • Location: Toronto, Ontario
Here are some of the key updates from discord.

2020-02-17: CRP Update
- the factory is "open" in the loosest sense of the word. Since the 10th, there is a single employee at the factory because the rest of the workers including Hammer himself are not being allowed back into the province.
- that being said that one worker is working on the keycaps but at the pace only one person in a factory can.
TL;DR the factory is virtually closed and will be until the province opens up.

2020-03-02 Update
- Batch is still undergoing production by the one worker
- The return of the other workers either this week or the next
- Once they're back it should be done shortly - ETA of shipment to Syrup Labs = end of March
- Current production photos attached
- Next Update: 2020-03-09 (on discord). After shipment has arrived keep a lookout for a bigger update

Offline AdrianMan

  • Posts: 69
Hey guys if you have an extra 65/75% compatibility kit I'd like one... I have CRP Desko and would like to use it on my FC660c.

Please PM if you can help :)

Thanks !

Offline SleepIsAllINeed

  • Posts: 37
  • Location: Toronto, Ontario
Key Update below

2020-03-11 Update
- CRP is no longer a one-man production. The cavalry is arriving tonight here or tomorrow in china and they'll be pulling OT to get the sets done. tada
- With that being said, ETA early to mid April to us - this is accounting for any shipping delays that may occur due to Covid19
- next update sometime next week
- Thank you again to all our participants going on this wild ride with us

Sent from my Pixel 3 using Tapatalk


Offline SleepIsAllINeed

  • Posts: 37
  • Location: Toronto, Ontario
2020-03-21 Update

- Production is 80% there. Arabic is finished see here: https://imgur.com/a/sZoOPHW.
- Again on track for April ship date
- Will update again on 2020-03-30 expect a non-update as we are finishing up production.

Offline konstantin

  • Formerly constexpr
  • Posts: 464
  • Location: Serbia
This looks good, I'm not sure how I managed to miss the GB. Will there be extras after the GB orders have shipped?