Author Topic: [IC] C21 RETRO R1 Custom Numpad (GB Closed - Packaging products)  (Read 8442 times)

0 Members and 1 Guest are viewing this topic.

Offline Rich Carpenter

  • Thread Starter
  • Posts: 44
[IC] C21 RETRO R1 Custom Numpad (GB Closed - Packaging products)
« on: Wed, 18 December 2019, 05:23:00 »
[IC] C21 RETRO R1 Custom Numpad



*Update*
01/08/2020 - GB Closed - Ready to mass production
12/31/2019 - GB Form opened
12/25/2019 - Rearrange timeline and price updated
12/21/2019 - Real Picture update

GB link (awaiting approval)
https://geekhack.org/index.php?topic=104048.msg2848918#msg2848918

GB Reddit
https://www.reddit.com/r/mechmarket/comments/ei6zdf/gb_c21_retro_custom_numpad/

IC Form
https://forms.gle/RwTZnUzyTorXgLke8


Real Picture

More














3D Render
More






Included in this set:
•   Aluminium base (Aluminum 6061). 4 color. Standard : black , red , silver. Founders edition : gold.   
•   Plate 4 color. Founders edition : Gold. Standard : Black , Red , Silver.
•   Bottom housing (7.5 degree angle).
•   MX Reinforcement Plate (aluminum).
•   PCB presoldered (QMK).

Info:
•   Limit:
   10 sets Founders edition: Gold.
   40 sets Standard: Black , Red , Silver
•   Case has an angle of 7.5 degrees for the aluminum bottom.
•   Full keymapping.
•   Supports MX switches.
•   Switches are not included (Requires Cherry PCB mounted stabilizers 3 set).

Price:
•   $99USD for one kit  Standard  (base, PCB, plate, counterweight, cable, stabilizer)
•  $159 USD for one kit Founders Edition (base, PCB, plate, counterweight, cable, stabilizer)
•   Extra:
o   PCB:                          $25  USD
o   Plate:                        $10 USD
o   Counterweight:           $5   USD
Groupbuy timeline:
•   Group Buy opens:    December     31, 2019
•   Group Buy closes:    January 5, 2020
•   Payment deadline:   January 5, 2020
•   Keyboards will be shipped out: Late January , 2020

Shipping info:
•   When start to ship will sent invoce for shipping fee and sort shipping address
•   Shipping will be from Viet Nam with EMS (around $35 USD)
•   Shipping cost will depend on your location.
•   Each set weighs about (TBD) kg with packaging.
•   Click here to check your zone
•   Click here to check their prices in VND

Notes:
•   Deadline for order is Until 40 sets (regular version) and 10 sets (special version)
•   Deadline for order is January 5, 2020.
•   Order ONLY if you can pay the invoice by the deadline (January 5, 2020)
•   There will be no extras for sale after this group buy is closed, so please put your order in before it's too late ;)
•   I will send invoices through Paypal to everyone, so you need a verified PayPal account to receive and pay. Also please check the information carefully before submitting your order. There will be Paypal fees added to the price.
•   If you want to make changes to your order, please send me a PM and be mindful of your change.
•   I can only guarantee damages for 7 days from the day you receive the items.
•   Please include your number when PM'ing me for changes

Check your order here (I update this manually)


FAQ:

   Q : Where is this items made ?
   A : In Viet Nam.
   Q: I'm not on the list, did I make it?
   A: If you don't see yourself on the list, unfortunately you did not make it.

   Q: Will you be running a R2 for this GB?
   A: Most likely not.

   Q: Why was my position changed?
   A: I had to shift orders around to group the shipping costs.

   Q: What happens if I'm 41, 42...etc.
   A: If someone cancels their order, you will be bumped up.

   Q: Can I change my order once the invoice has been paid?
   A: Nope, no more changes.

P/s:
Each boards cant be 100% but i will try my best do it perfectly. For some orders i will consider to sale. Thanks :)
« Last Edit: Thu, 05 March 2020, 03:02:37 by Rich Carpenter »

Offline kiriiya

  • Posts: 13
Re: [IC] C21 RETRO R1 Custom Numpad
« Reply #1 on: Wed, 18 December 2019, 05:25:55 »
Looks pretty cool

Online Rob27shred

  • Posts: 884
  • Location: Pittsburgh, PA
  • insane in the membrane
Re: [IC] C21 RETRO R1 Custom Numpad
« Reply #2 on: Wed, 18 December 2019, 06:00:03 »
Nice little numpad, but why so expensive?

Offline asianfork

  • Posts: 45
  • Toe-pur
Re: [IC] C21 RETRO R1 Custom Numpad
« Reply #3 on: Wed, 18 December 2019, 07:05:23 »
Are there renders with different keycaps on them?
HHKB Pro 2


Offline Steezus

  • Keeper of Facts
  • * Elevated Elder
  • Posts: 2497
Re: [IC] C21 RETRO R1 Custom Numpad
« Reply #4 on: Wed, 18 December 2019, 07:16:31 »
I always love a good external numpad. The weight seems so small that it would have an almost negligible difference in weight. Personally I'd rather do without the weight and save on machining. Is this suppose to be an IC or a GB? It says payment deadline is December 16th but order deadline is December 25th.
TGR-Jane CE | TGR-Tris CE | Lyn Montage | LZ PhysiX | Exclusive e8.5

Offline Rich Carpenter

  • Thread Starter
  • Posts: 44
Re: [IC] C21 RETRO R1 Custom Numpad
« Reply #5 on: Wed, 18 December 2019, 10:46:40 »
Looks pretty cool
Tks bro. We just do our best  :thumb: :thumb: :thumb:

Offline Rich Carpenter

  • Thread Starter
  • Posts: 44
Re: [IC] C21 RETRO R1 Custom Numpad
« Reply #6 on: Wed, 18 December 2019, 10:51:23 »
Looks pretty cool
Tks bro. We just do our best  :thumb: :thumb: :thumb:
Thank you for your interest. We will have GB stars a few days ago. This is the first post, so there are a few mistakes. We will fix it into GB post. thank you very much. Hope you will support us once. You will not feel disappointed

Offline Rich Carpenter

  • Thread Starter
  • Posts: 44
Re: [IC] C21 RETRO R1 Custom Numpad
« Reply #7 on: Wed, 18 December 2019, 10:54:37 »
I always love a good external numpad. The weight seems so small that it would have an almost negligible difference in weight. Personally I'd rather do without the weight and save on machining. Is this suppose to be an IC or a GB? It says payment deadline is December 16th but order deadline is December 25th.
Thank you for your interest. We will have GB stars a few days ago. This is the first post, so there are a few mistakes. We will fix it into GB post. thank you very much. Hope you will support us once. You will not feel disappointed

Offline Rich Carpenter

  • Thread Starter
  • Posts: 44
Re: [IC] C21 RETRO R1 Custom Numpad
« Reply #8 on: Wed, 18 December 2019, 11:00:55 »
Nice little numpad, but why so expensive?
Thank you for your interest in our products. Even though it's just a numpad, our product is made by 200% of its power. It is machined with good material, good finishing quality. We will open GB a few days later, at that time will perfect the real image. Hope you will buy it.

Offline Rich Carpenter

  • Thread Starter
  • Posts: 44
Re: [IC] C21 RETRO R1 Custom Numpad
« Reply #9 on: Wed, 18 December 2019, 11:06:30 »
Are there renders with different keycaps on them?
We will update in the next 1-2 days.

Offline Rich Carpenter

  • Thread Starter
  • Posts: 44
Re: [IC] C21 RETRO R1 Custom Numpad (Real image and GB date confirmed)
« Reply #10 on: Sat, 21 December 2019, 04:07:48 »
*Update*
12/21/2019 - Real picture updated
« Last Edit: Sat, 21 December 2019, 05:48:27 by Rich Carpenter »

Offline shiroshiro

  • Posts: 9
Re: [IC] C21 RETRO R1 Custom Numpad (Real image and GB date confirmed)
« Reply #11 on: Sat, 21 December 2019, 10:28:08 »
Please update the link for shipping infor.

Also, good luck and hope you guys would turn this out well.

Offline Rich Carpenter

  • Thread Starter
  • Posts: 44
Re: [IC] C21 RETRO R1 Custom Numpad (Real image and GB date confirmed)
« Reply #12 on: Sat, 21 December 2019, 10:41:03 »
Please update the link for shipping infor.

Also, good luck and hope you guys would turn this out well.
Thank you for your interest. We will update soon. Please support us by buying 1 ^^

Offline consumer

  • Posts: 50
Re: [IC] C21 RETRO R1 Custom Numpad (Real image and GB date confirmed)
« Reply #13 on: Sat, 21 December 2019, 14:40:18 »
Will the PCB allow for 4x6 all 1u keys?


Sent from my iPhone using Tapatalk

Offline mrkantz

  • Posts: 176
  • Location: SD
Re: [IC] C21 RETRO R1 Custom Numpad (Real image and GB date confirmed)
« Reply #14 on: Sat, 21 December 2019, 15:57:36 »
The second photo shows a bit of the PCB and it appears to support all 1u

Offline Rich Carpenter

  • Thread Starter
  • Posts: 44
Re: [IC] C21 RETRO R1 Custom Numpad (Real image and GB date confirmed)
« Reply #15 on: Mon, 23 December 2019, 23:45:36 »
Will the PCB allow for 4x6 all 1u keys?


Sent from my iPhone using Tapatalk

It support 2 x 1u key at the Number 0 key position.

Thanks for your concern. Hope it fits your kit.


Offline Rich Carpenter

  • Thread Starter
  • Posts: 44
Re: [IC] C21 RETRO R1 Custom Numpad (Real image and GB date confirmed)
« Reply #16 on: Wed, 25 December 2019, 09:57:08 »
 :thumb: :thumb:

Online Rob27shred

  • Posts: 884
  • Location: Pittsburgh, PA
  • insane in the membrane
Re: [IC] C21 RETRO R1 Custom Numpad
« Reply #17 on: Wed, 25 December 2019, 11:48:49 »
Nice little numpad, but why so expensive?
Thank you for your interest in our products. Even though it's just a numpad, our product is made by 200% of its power. It is machined with good material, good finishing quality. We will open GB a few days later, at that time will perfect the real image. Hope you will buy it.

You know what, I just saw you IC post on r/mechmarket & have to admit I had the prices wrong in my head when I asked "Why so much?". I thought they were all $159, now seeing the 40 non founders units are $99 I gotta say that is a much more reasonable price! Count me in as very interested since I've been looking for a really nice programmable numpad. I have a couple questions though. On here it says the GB was to to start Dec 23rd or 24th, but on the r/mechmarket post from today it says the GB starts on Dec. 31st which is it (I'm assuming the latter since you have yet to provide a link to a GB form/page)? Also where & what time will you be linking the form/page for the GB. With it's limited nature I'd like to have a fighting chance to get one LOL! Thanks for any info you can provide me with on those questions, I get it if you can't give a specific time though. Anyways GL the GB & I hope I can get in!
« Last Edit: Wed, 25 December 2019, 11:51:20 by Rob27shred »

Offline Rich Carpenter

  • Thread Starter
  • Posts: 44
Re: [IC] C21 RETRO R1 Custom Numpad (Real image and GB date confirmed)
« Reply #18 on: Wed, 25 December 2019, 12:07:44 »
Nice little numpad, but why so expensive?
Thank you for your interest in our products. Even though it's just a numpad, our product is made by 200% of its power. It is machined with good material, good finishing quality. We will open GB a few days later, at that time will perfect the real image. Hope you will buy it.

You know what, I just saw you IC post on r/mechmarket & have to admit I had the prices wrong in my head when I asked "Why so much?". I thought they were all $159, now seeing the 40 non founders units are $99 I gotta say that is a much more reasonable price! Count me in as very interested since I've been looking for a really nice programmable numpad. I have a couple questions though. On here it says the GB was to to start Dec 23rd or 24th, but on the r/mechmarket post from today it says the GB starts on Dec. 31st which is it (I'm assuming the latter since you have yet to provide a link to a GB form/page)? Also where & what time will you be linking the form/page for the GB. With it's limited nature I'd like to have a fighting chance to get one LOL! Thanks for any info you can provide me with on those questions, I get it if you can't give a specific time though. Anyways GL the GB & I hope I can get in!

Thanks for your concern and interest.

I have some trouble with my account on reddit so i can not post it on reddit, then now i need to rearrange my timeline. Sorry for this trouble, this is my first time so i need to apologize you guy.

Next time will be better, I promise.

About the price, we was researching and optimizing our production process, then the price is more reasonable than before.

I hope you can get in then i won’t let you down.


Sent from my iPhone using Tapatalk

Offline consumer

  • Posts: 50
Re: [IC] C21 RETRO R1 Custom Numpad (Real image and GB date confirmed)
« Reply #19 on: Wed, 25 December 2019, 15:44:50 »
Will the PCB allow for 4x6 all 1u keys?


Sent from my iPhone using Tapatalk

It support 2 x 1u key at the Number 0 key position.

Thanks for your concern. Hope it fits your kit.
What about 2x 1u key at Enter and Plus key position? I’m trying to establish if the board support all 1u matrix.


Sent from my iPhone using Tapatalk

Offline YMwoo

  • Posts: 43
Re: [IC] C21 RETRO R1 Custom Numpad (Real image and GB date confirmed)
« Reply #20 on: Wed, 25 December 2019, 23:29:04 »
Really interested, but is there any chance for hotswap option?
Been looking for a nice hotswap numpad

Offline Rich Carpenter

  • Thread Starter
  • Posts: 44
Re: [IC] C21 RETRO R1 Custom Numpad (Real image and GB date confirmed)
« Reply #21 on: Thu, 26 December 2019, 01:19:24 »
Will the PCB allow for 4x6 all 1u keys?


Sent from my iPhone using Tapatalk

It support 2 x 1u key at the Number 0 key position.

Thanks for your concern. Hope it fits your kit.
What about 2x 1u key at Enter and Plus key position? I’m trying to establish if the board support all 1u matrix.


Sent from my iPhone using Tapatalk

Sorry, it's not support. Maybe on the next production.

Offline premise_

  • Posts: 21
Re: [IC] C21 RETRO R1 Custom Numpad (GB date confirmed & pricing update)
« Reply #22 on: Thu, 26 December 2019, 03:10:56 »
Is that gap between the bottom of the keys and the case intentional? The one near the bottom row to the case seems a tad bit too big.

Sent from my SM-G970F using Tapatalk


Online Rob27shred

  • Posts: 884
  • Location: Pittsburgh, PA
  • insane in the membrane
Re: [IC] C21 RETRO R1 Custom Numpad (Real image and GB date confirmed)
« Reply #23 on: Thu, 26 December 2019, 04:37:40 »
Nice little numpad, but why so expensive?
Thank you for your interest in our products. Even though it's just a numpad, our product is made by 200% of its power. It is machined with good material, good finishing quality. We will open GB a few days later, at that time will perfect the real image. Hope you will buy it.

You know what, I just saw you IC post on r/mechmarket & have to admit I had the prices wrong in my head when I asked "Why so much?". I thought they were all $159, now seeing the 40 non founders units are $99 I gotta say that is a much more reasonable price! Count me in as very interested since I've been looking for a really nice programmable numpad. I have a couple questions though. On here it says the GB was to to start Dec 23rd or 24th, but on the r/mechmarket post from today it says the GB starts on Dec. 31st which is it (I'm assuming the latter since you have yet to provide a link to a GB form/page)? Also where & what time will you be linking the form/page for the GB. With it's limited nature I'd like to have a fighting chance to get one LOL! Thanks for any info you can provide me with on those questions, I get it if you can't give a specific time though. Anyways GL the GB & I hope I can get in!

Thanks for your concern and interest.

I have some trouble with my account on reddit so i can not post it on reddit, then now i need to rearrange my timeline. Sorry for this trouble, this is my first time so i need to apologize you guy.

Next time will be better, I promise.

About the price, we was researching and optimizing our production process, then the price is more reasonable than before.

I hope you can get in then i won’t let you down.


Sent from my iPhone using Tapatalk

No biggie man, I can only imagine all the things you're trying to keep up on this being your first GB. Just wanted to make sure I didn't miss out & the the 31st was the actual day the GB started. Thanks for clarifying!

Offline Rich Carpenter

  • Thread Starter
  • Posts: 44
Re: [IC] C21 RETRO R1 Custom Numpad (GB date confirmed & pricing update)
« Reply #24 on: Thu, 26 December 2019, 08:20:13 »
Is that gap between the bottom of the keys and the case intentional? The one near the bottom row to the case seems a tad bit too big.

Sent from my SM-G970F using Tapatalk

That is our design. Thanks for your asking, we will note and may change in the next product.

Thanks again! Have a good day!


Sent from my iPhone using Tapatalk

Offline Rich Carpenter

  • Thread Starter
  • Posts: 44
Re: [IC] C21 RETRO R1 Custom Numpad (GB date confirmed & pricing update)
« Reply #25 on: Thu, 26 December 2019, 08:22:19 »
Nice little numpad, but why so expensive?
Thank you for your interest in our products. Even though it's just a numpad, our product is made by 200% of its power. It is machined with good material, good finishing quality. We will open GB a few days later, at that time will perfect the real image. Hope you will buy it.

You know what, I just saw you IC post on r/mechmarket & have to admit I had the prices wrong in my head when I asked "Why so much?". I thought they were all $159, now seeing the 40 non founders units are $99 I gotta say that is a much more reasonable price! Count me in as very interested since I've been looking for a really nice programmable numpad. I have a couple questions though. On here it says the GB was to to start Dec 23rd or 24th, but on the r/mechmarket post from today it says the GB starts on Dec. 31st which is it (I'm assuming the latter since you have yet to provide a link to a GB form/page)? Also where & what time will you be linking the form/page for the GB. With it's limited nature I'd like to have a fighting chance to get one LOL! Thanks for any info you can provide me with on those questions, I get it if you can't give a specific time though. Anyways GL the GB & I hope I can get in!

Thanks for your concern and interest.

I have some trouble with my account on reddit so i can not post it on reddit, then now i need to rearrange my timeline. Sorry for this trouble, this is my first time so i need to apologize you guy.

Next time will be better, I promise.

About the price, we was researching and optimizing our production process, then the price is more reasonable than before.

I hope you can get in then i won’t let you down.


Sent from my iPhone using Tapatalk

No biggie man, I can only imagine all the things you're trying to keep up on this being your first GB. Just wanted to make sure I didn't miss out & the the 31st was the actual day the GB started. Thanks for clarifying!
Glad to hear that, see you on the GB post and that will be a amazing gift on the last day of the year.

Have a nice holiday, my friend!


Sent from my iPhone using Tapatalk

Offline premise_

  • Posts: 21
Re: [IC] C21 RETRO R1 Custom Numpad (GB date confirmed & pricing update)
« Reply #26 on: Thu, 26 December 2019, 08:23:02 »
Is that gap between the bottom of the keys and the case intentional? The one near the bottom row to the case seems a tad bit too big.

Sent from my SM-G970F using Tapatalk

That is our design. Thanks for your asking, we will note and may change in the next product.

Thanks again! Have a good day!


Sent from my iPhone using Tapatalk
Ah. Alright.

Good luck on your gb!

Sent from my SM-G970F using Tapatalk


Offline Rich Carpenter

  • Thread Starter
  • Posts: 44
Re: [IC] C21 RETRO R1 Custom Numpad (GB date confirmed & pricing update)
« Reply #27 on: Thu, 26 December 2019, 21:06:46 »
Is that gap between the bottom of the keys and the case intentional? The one near the bottom row to the case seems a tad bit too big.

Sent from my SM-G970F using Tapatalk

That is our design. Thanks for your asking, we will note and may change in the next product.

Thanks again! Have a good day!


Sent from my iPhone using Tapatalk
Ah. Alright.

Good luck on your gb!

Sent from my SM-G970F using Tapatalk
tks u bro ^^

Offline Rich Carpenter

  • Thread Starter
  • Posts: 44
Re: [IC] C21 RETRO R1 Custom Numpad (Real image and GB date confirmed)
« Reply #28 on: Fri, 27 December 2019, 02:07:16 »
Really interested, but is there any chance for hotswap option?
Been looking for a nice hotswap numpad

Sorry for late reply,

Using hotswap is quite convenient, but in my opinion it is not durable and I want to provide a better user experience so this product won't have hotswap option. We will consider in the following products.

Thanks for your interest!

Offline Rich Carpenter

  • Thread Starter
  • Posts: 44
Re: [IC] C21 RETRO R1 Custom Numpad (GB date confirmed & pricing update)
« Reply #29 on: Sun, 29 December 2019, 21:08:14 »

GB will open soon ^^

Offline Missingnumber

  • Posts: 11
Re: [IC] C21 RETRO R1 Custom Numpad (GB date confirmed & pricing update)
« Reply #30 on: Mon, 30 December 2019, 21:00:28 »
The PCBs are USB-C right? What time will the group buy start?

Offline heptose

  • Posts: 1

Offline Rich Carpenter

  • Thread Starter
  • Posts: 44
Re: [IC] C21 RETRO R1 Custom Numpad (GB date confirmed & pricing update)
« Reply #32 on: Tue, 31 December 2019, 13:09:38 »
The PCBs are USB-C right? What time will the group buy start?
Yes, USB-C my friend and the GB is starting now  :thumb:
https://www.reddit.com/r/mechmarket/comments/ei6zdf/gb_c21_retro_custom_numpad/
« Last Edit: Tue, 31 December 2019, 13:15:24 by Rich Carpenter »

Offline t8c

  • Posts: 168
  • Location: NO, EUR
Re: [IC] C21 RETRO R1 Custom Numpad (GB date confirmed & pricing update)
« Reply #33 on: Tue, 31 December 2019, 13:39:12 »
Joined in for 1.
« Last Edit: Tue, 31 December 2019, 13:45:47 by t8c »

Offline Missingnumber

  • Posts: 11
Re: [IC] C21 RETRO R1 Custom Numpad (GB date confirmed & pricing update)
« Reply #34 on: Tue, 31 December 2019, 14:06:22 »
This is the first group buy I've joined, other than the easy GMK ones. I'm just a little nervous, but I've been looking for a USB-C QMK numpad for a while now. The photos look great.

Offline Rich Carpenter

  • Thread Starter
  • Posts: 44
Re: [IC] C21 RETRO R1 Custom Numpad (GB date confirmed & pricing update)
« Reply #35 on: Tue, 31 December 2019, 14:17:03 »
Joined in for 1.
Wow, that's great. Thanks for joining in. You will receive an invoice soon and the product will be delivered to you as quickly as possible.


This is the first group buy I've joined, other than the easy GMK ones. I'm just a little nervous, but I've been looking for a USB-C QMK numpad for a while now. The photos look great.

We will make you happy about this product. Hope my next product will make you guy excited as well.


Happy New Year everyone!

Offline johuu

  • Posts: 107
  • Location: Germany
Re: [IC] C21 RETRO R1 Custom Numpad (GB form is live)
« Reply #36 on: Thu, 02 January 2020, 13:42:34 »

Offline Rich Carpenter

  • Thread Starter
  • Posts: 44
[IC] C21 RETRO R1 Custom Numpad (GB form is live)
« Reply #37 on: Thu, 02 January 2020, 20:41:31 »
Watch out for the SCAM https://geekhack.org/index.php?topic=93342.100;topicseen

Hi there,

I understand your concern.  I see you are a victim of that GB, I am so sorry.  But this product is my investment and development.  It has nothing to do with the above group, I am a CNC workshop and if you are interested can contact me.

I will send the product even if only 1 person orders, please feel free to cancel if you do not like it anymore.  We appreciate all of your comments. 

Thank you!

P/S: 50 sets are ready to anodizing today, our real final product image will be upload soon before the payment deadline i hope.


Sent from my iPhone using Tapatalk
« Last Edit: Thu, 02 January 2020, 20:52:55 by Rich Carpenter »

Offline naked_and_jameson

  • Posts: 11
Re: [IC] C21 RETRO R1 Custom Numpad (GB Closed - Ready to mass production)
« Reply #38 on: Thu, 23 January 2020, 12:59:10 »
Any updates on this GB? Is late January still an accurate ship date?

Sent from my SM-N960U using Tapatalk


Offline thornkin

  • Posts: 188
Re: [IC] C21 RETRO R1 Custom Numpad (GB Closed - Ready to mass production)
« Reply #39 on: Thu, 23 January 2020, 15:11:05 »
Missed the GB, but very interested.

Offline t8c

  • Posts: 168
  • Location: NO, EUR
Re: [IC] C21 RETRO R1 Custom Numpad (GB Closed - Ready to mass production)
« Reply #40 on: Sat, 25 January 2020, 09:09:46 »
From https://www.reddit.com/r/mechmarket/comments/ei6zdf/gb_c21_retro_custom_numpad/fffleyp/

Status Updated January 25, 2020

It is currently Tet holiday in Vietnam so factories and workers are currently on holiday, so the product is not 100% complete to send. I hope there will be goods soon by the end of January to send to everyone. Sorry for the inconvenience.


Offline Rich Carpenter

  • Thread Starter
  • Posts: 44
Re: [IC] C21 RETRO R1 Custom Numpad (GB Closed - Ready to mass production)
« Reply #41 on: Sat, 25 January 2020, 13:01:24 »
Any updates on this GB? Is late January still an accurate ship date?

Sent from my SM-N960U using Tapatalk

Sorry for late update.

Apologize for the work being paused for the Tet holiday.  We will finish the product after this vacation.  I really want the product to ship to you as promised.  Many thanks for your attention.


Sent from my iPhone using Tapatalk

Offline lyktfxc

  • Posts: 1
Re: [IC] C21 RETRO R1 Custom Numpad (GB Closed - Ready to mass production)
« Reply #42 on: Fri, 31 January 2020, 18:04:00 »
Does this PCB support any LED or RGB LED?

Basically, this is my only question...

Offline naked_and_jameson

  • Posts: 11
Re: [IC] C21 RETRO R1 Custom Numpad (GB Closed - Ready to mass production)
« Reply #43 on: Mon, 17 February 2020, 22:46:53 »
Any update on shipping ETA?

Sent from my SM-N960U using Tapatalk


Offline Rich Carpenter

  • Thread Starter
  • Posts: 44
Re: [IC] C21 RETRO R1 Custom Numpad (GB Closed - Ready to mass production)
« Reply #44 on: Tue, 18 February 2020, 00:55:14 »
Any update on shipping ETA?

Sent from my SM-N960U using Tapatalk

We got problems on some products. So now on the silver color is already done. The rest is being processed. I am really sorry for this delay.  partly because of the corona outbreak so everything is stalled and difficult to control. After this product, we will send employees to work directly when processing in the next product to avoid this unnecessary delay.


Sent from my iPhone using Tapatalk

Offline ehagerty

  • Posts: 16
Re: [IC] C21 RETRO R1 Custom Numpad (GB Closed - Ready to mass production)
« Reply #45 on: Tue, 18 February 2020, 03:05:23 »
Thanks for letting us know!  Everyone is having supply chain issues, which are actually human suffering issues in China in many cases, so there isn't much you can do.

Offline Rich Carpenter

  • Thread Starter
  • Posts: 44
Re: [IC] C21 RETRO R1 Custom Numpad (GB Closed - Packaging products)
« Reply #46 on: Thu, 05 March 2020, 03:02:11 »
Packaging products March 5, 2020

https://imgur.com/gallery/N0WNtAY

We have received finished products and packed them. Some orders are missing information, we will email you to complete the shipping information.

We hope you sympathize for the unintended incidents that cause goods to be delayed.

Thanks everyone!

Offline ehagerty

  • Posts: 16
Re: [IC] C21 RETRO R1 Custom Numpad (GB Closed - Packaging products)
« Reply #47 on: Thu, 05 March 2020, 04:19:10 »
Excellent!  Thanks for letting us know and for persevering through all the stress from the pandemic.