Author Topic: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (preparing for shipment)  (Read 114950 times)

0 Members and 1 Guest are viewing this topic.

Offline Pachriksu

  • Posts: 211
  • Location: United States
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #250 on: Sat, 25 April 2020, 18:53:58 »
Let's get that manu hype going woot woot

Offline oldcat

  • Posts: 2629
  • Location: US
  • 65% is Life
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #251 on: Sun, 26 April 2020, 21:06:18 »
Let's get that manu hype going woot woot

AirPotter went to the factory today to check on the CNC status!
Looks like manufacturer production capacity overall in China is down quite a bit, but hopefully, they will reserve enough machines for our GB!

Offline oldcat

  • Posts: 2629
  • Location: US
  • 65% is Life
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #252 on: Sun, 26 April 2020, 23:57:08 »
Update 4/26/2020: a second batch of materials just arrived and unloaded to factory, more updates to come from airpotter in the next few days.




Offline heartbreak

  • Posts: 28
  • Location: US
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #253 on: Sun, 26 April 2020, 23:57:49 »
Update 4/26/2020: a second batch of materials just arrived and unloaded to factory, more updates to come from airpotter in the next few days.

Show Image


Show Image

Much shine


Sent from my iPhone using Tapatalk

Offline Dopamine

  • Posts: 54
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #254 on: Mon, 27 April 2020, 09:41:09 »
Update 4/26/2020: a second batch of materials just arrived and unloaded to factory, more updates to come from airpotter in the next few days.

Show Image


Show Image



What percentage of orders does this material cover? IDK if you can say or not

Offline oldcat

  • Posts: 2629
  • Location: US
  • 65% is Life
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #255 on: Mon, 27 April 2020, 18:47:27 »
Update 4/26/2020: a second batch of materials just arrived and unloaded to factory, more updates to come from airpotter in the next few days.

Show Image


Show Image



What percentage of orders does this material cover? IDK if you can say or not

Not so much as I can’t say, but I don’t know the details of either the financial side or the production side. Just helping with design and communicate the information here as Potter’s vpn sometimes breaks

Offline Dopamine

  • Posts: 54
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #256 on: Tue, 28 April 2020, 10:42:23 »
Update 4/26/2020: a second batch of materials just arrived and unloaded to factory, more updates to come from airpotter in the next few days.

Show Image


Show Image


I understand

What percentage of orders does this material cover? IDK if you can say or not

Not so much as I can’t say, but I don’t know the details of either the financial side or the production side. Just helping with design and communicate the information here as Potter’s vpn sometimes breaks

Offline willyG

  • Posts: 23
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #257 on: Sun, 03 May 2020, 00:48:49 »
Is this board compatible with Durock screw-in stabs?

Offline eyedrop

  • Posts: 573
  • Location: Keeb Abyss
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #258 on: Sun, 03 May 2020, 08:24:38 »
Is this board compatible with Durock screw-in stabs?
I don't see why not.

Sent from my PH-1 using Tapatalk


Offline Missingnumber

  • Posts: 75
  • Location: VA, USA
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #259 on: Wed, 06 May 2020, 13:10:00 »
I am super excited for this board. I got the Black Gold with extra pink badges.  However, I'm starting to regret my decision of not buying an extra PCB. I had a couple unrelated PCBs break on me recently. Will there be many available for purchase after the boards ship?

Offline gilgalad101

  • Posts: 4
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #260 on: Thu, 07 May 2020, 08:36:34 »
They had it available on their website a couple days ago I think.  They’re $50 outside the GB.  I was considering getting an extra as well, but they’re currently sold out.

Offline Pachriksu

  • Posts: 211
  • Location: United States
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #261 on: Thu, 07 May 2020, 10:22:31 »
I am super excited for this board. I got the Black Gold with extra pink badges.  However, I'm starting to regret my decision of not buying an extra PCB. I had a couple unrelated PCBs break on me recently. Will there be many available for purchase after the boards ship?

They had it available on their website a couple days ago I think.  They’re $50 outside the GB.  I was considering getting an extra as well, but they’re currently sold out.

I don't think they plan on selling more PCBs, but check with them just to make sure. I'm assuming the only option now is aftermarket; I'm not completely sure though.

Offline oldcat

  • Posts: 2629
  • Location: US
  • 65% is Life
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #262 on: Thu, 07 May 2020, 11:27:23 »
Potter posted update, and he said he will go to the factory tomorrow.


Offline Dopamine

  • Posts: 54
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #263 on: Fri, 08 May 2020, 15:25:49 »
Potter posted update, and he said he will go to the factory tomorrow.

Show Image


This is very sexy.
I just wish the bottom weight would be made of brass as well
But I understand why that would not only be hard but also very expensive

Offline oldcat

  • Posts: 2629
  • Location: US
  • 65% is Life
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #264 on: Sat, 09 May 2020, 00:01:56 »
Potter posted update, and he said he will go to the factory tomorrow.

Show Image


This is very sexy.
I just wish the bottom weight would be made of brass as well
But I understand why that would not only be hard but also very expensive

Yeah, the GB price is very low. Total fees combined for Potter is like 10% which is included in the price. Also PVD for large items tend to be much harder and way more expensive. Learned this hard way from the think6.5 GB. And without PVD the brass will look like crap very quickly.
« Last Edit: Sat, 09 May 2020, 00:03:53 by oldcat »

Offline drevan

  • Posts: 8
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #265 on: Sat, 09 May 2020, 08:17:01 »
Aww man, so sad I missed this GB! The new version looks amazing and I really appreciate that you guys did very interesting colorways. I guess I'll keep an eye out for extras or b-stock if you guys have any. Keep up the great work!

Offline Dopamine

  • Posts: 54
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #266 on: Sat, 09 May 2020, 09:22:13 »
Aww man, so sad I missed this GB! The new version looks amazing and I really appreciate that you guys did very interesting colorways. I guess I'll keep an eye out for extras or b-stock if you guys have any. Keep up the great work!

Of course, it all makes sense.
I'm still very much looking forward to my Robocop. Gonna put some GMK Apollo on it. Is gonna look guuuuuuuuud

Offline oldcat

  • Posts: 2629
  • Location: US
  • 65% is Life
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #267 on: Fri, 15 May 2020, 16:07:13 »
No picture update this week due to typhoon situation in Guangzhou, the production was not interrupted.

Offline mvkoto

  • Posts: 60
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #268 on: Fri, 15 May 2020, 21:54:24 »
every time i see this thread update, im hoping they're magically going to say we have extras.

Offline __init__

  • Posts: 14
  • Location: Melbourne, Australia
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #269 on: Sat, 16 May 2020, 00:01:49 »
You and me both. I recently got into mechs and JUST missed this one.

Offline AIRPOTTER

  • Thread Starter
  • Posts: 468
  • Owner of Gray Studio
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #270 on: Tue, 19 May 2020, 12:09:23 »
going to the factory tomorrow morning, will be updating soon. Things are moving smoothly.

Offline LennyD0g

  • Posts: 5
  • Location: Los Angeles, CA
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #271 on: Thu, 21 May 2020, 02:10:00 »
Anyone have currently running keycap GB recommendations that would look good with the e-white (Stormtropper? lol) iteration? Just saw the update for GMK Unit 01 and now a part of me deeply regrets not getting the EVA-01 board.


Offline Drudoo

  • Posts: 14
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #272 on: Thu, 21 May 2020, 03:06:28 »
Anyone have currently running keycap GB recommendations that would look good with the e-white (Stormtropper? lol) iteration? Just saw the update for GMK Unit 01 and now a part of me deeply regrets not getting the EVA-01 board.
Check out gmk redacted

Offline Hawksmoor

  • Posts: 35
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #273 on: Thu, 21 May 2020, 04:22:06 »
Anyone have currently running keycap GB recommendations that would look good with the e-white (Stormtropper? lol) iteration? Just saw the update for GMK Unit 01 and now a part of me deeply regrets not getting the EVA-01 board.
Check out gmk redacted

I would also suggest GOK's Kuro Shiro R2 as that is WS1 white

Offline LennyD0g

  • Posts: 5
  • Location: Los Angeles, CA
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #274 on: Thu, 21 May 2020, 16:40:55 »
Anyone have currently running keycap GB recommendations that would look good with the e-white (Stormtropper? lol) iteration? Just saw the update for GMK Unit 01 and now a part of me deeply regrets not getting the EVA-01 board.
Check out gmk redacted

I would also suggest GOK's Kuro Shiro R2 as that is WS1 white

ePBT sounds interesting, I copped the basic set. Hopefully there is an improvement on the texture. I am not a fan of the grainy texture on the PBT set I'm currently using.


Offline oldcat

  • Posts: 2629
  • Location: US
  • 65% is Life
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #275 on: Thu, 21 May 2020, 19:07:50 »
Anyone have currently running keycap GB recommendations that would look good with the e-white (Stormtropper? lol) iteration? Just saw the update for GMK Unit 01 and now a part of me deeply regrets not getting the EVA-01 board.
Check out gmk redacted

I would also suggest GOK's Kuro Shiro R2 as that is WS1 white

ePBT sounds interesting, I copped the basic set. Hopefully there is an improvement on the texture. I am not a fan of the grainy texture on the PBT set I'm currently using.

Agree with you on many PBT sets which tend to have a much lower quality than GMK. ePBT seems to be improving - some large modifiers and the space key continue to have lingering issues but I can probably live with it if they don't keep increasing price.

Also, check out ePBT Cool Kids by biip!

Offline hkiri

  • Posts: 162
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #276 on: Fri, 22 May 2020, 04:00:16 »
Any news on potential Schrodinger colorways besides the two initially leaked renders (cream/orange and mint-green)?

Offline rinkaan

  • Posts: 109
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #277 on: Fri, 22 May 2020, 04:44:52 »
there were another darker green with orange (somewhat like a pilot bomber jacket colorway) and a all black which was touted (cant rem where)

Offline AIRPOTTER

  • Thread Starter
  • Posts: 468
  • Owner of Gray Studio
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #278 on: Fri, 22 May 2020, 13:28:25 »
Packagings of addon items are being made as well. Sandblasting, anodization, and electrophoresis surface treatment processes should start early June, which will take some time. I will update then.






Offline Dopamine

  • Posts: 54
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #279 on: Fri, 22 May 2020, 14:20:30 »
That is looking good

Offline AIRPOTTER

  • Thread Starter
  • Posts: 468
  • Owner of Gray Studio
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #280 on: Mon, 25 May 2020, 23:37:02 »
I will not be going to the factory this week, awaiting for CNC to complete before June, current progress:

CNC:
Top 100%
Bottom 50%
Plate 100%
LED Badge 70%
Back Badge 80%
L-shaped Badge 100%

Offline chowbabyloving

  • Posts: 65
  • Location: Canada
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #281 on: Mon, 25 May 2020, 23:39:11 »
I will not be going to the factory this week, awaiting for CNC to complete before June, current progress:

CNC:
Top 100%
Bottom 50%
Plate 100%
LED Badge 70%
Back Badge 80%
L-shaped Badge 100%

Wow that’s really fast, is it possible that you will deliver early ?

Offline skirnir88

  • Posts: 1
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #282 on: Tue, 26 May 2020, 00:10:33 »
Missed out on ordering a spare PCB/plate when they were up, is there a possibility that these will become available again once all orders have shipped?

Offline masamune27

  • Posts: 19
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #283 on: Tue, 26 May 2020, 00:35:49 »
I will not be going to the factory this week, awaiting for CNC to complete before June, current progress:

CNC:
Top 100%
Bottom 50%
Plate 100%
LED Badge 70%
Back Badge 80%
L-shaped Badge 100%

Wow, this was quicker than I expected  :eek:
But it's great to know that everything is going smoothly, thanks for the updates Airpotter  :D

Offline heartbreak

  • Posts: 28
  • Location: US
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #284 on: Tue, 26 May 2020, 05:23:05 »
Missed out on ordering a spare PCB/plate when they were up, is there a possibility that these will become available again once all orders have shipped?
Most likely gonna have some extras

Offline AIRPOTTER

  • Thread Starter
  • Posts: 468
  • Owner of Gray Studio
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #285 on: Tue, 26 May 2020, 11:07:57 »
In the mean time, a quick shoutout to wildcat, check out 3ildcat ‘s YouTube channel as he had some stunning videos about Space65 (R1) build and Space65 color filling instructions! I really want to try that myself after watching his amazing video.


Offline phinix

  • Posts: 1169
  • Location: Haggis Land
  • RIP typo...
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #286 on: Wed, 27 May 2020, 04:22:36 »
In the mean time, a quick shoutout to wildcat, check out 3ildcat ‘s YouTube channel as he had some stunning videos about Space65 (R1) build and Space65 color filling instructions! I really want to try that myself after watching his amazing video.


I saw that last night, very good stuff, I would do same thing to mine.. if I had one :(
9100 | 2070s 3070? | 2x 1TB SSD | Z390 Aorus Pro ITX | 16GB RAM | SFX 600W | Philips 40" 4K BDM4065UC | Sentry 2.0
Realforce R2 55g Novatouched+Deskeys #3 | CM QuickFire Rapid Frosty Flake MX Blacks | DROP CTRL High Profile w/ Glorious Holy Pandas| Model M | Logitech MX518 Legend | X52 PRO
SA: Carbon, Penumbra, 7bit's Round6, Amber Screen Cherry: OG caps XDA: Canvas MDA: Big Bone MT3: Serika

 ::: Phinix Cube ::: Phinix Nano Tower ::: Phinix Aurora ::: Phinix Chimera ::: Phinix Retro :::
star citizen :::  CMDR Phinix 325A LTI

Offline oldcat

  • Posts: 2629
  • Location: US
  • 65% is Life
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #287 on: Thu, 28 May 2020, 16:57:26 »
In the mean time, a quick shoutout to wildcat, check out 3ildcat ‘s YouTube channel as he had some stunning videos about Space65 (R1) build and Space65 color filling instructions! I really want to try that myself after watching his amazing video.


I saw that last night, very good stuff, I would do same thing to mine.. if I had one :(

Indeed Wildcat has super high quality content all across the board

Offline phinix

  • Posts: 1169
  • Location: Haggis Land
  • RIP typo...
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #288 on: Thu, 28 May 2020, 17:13:49 »
In the mean time, a quick shoutout to wildcat, check out 3ildcat ‘s YouTube channel as he had some stunning videos about Space65 (R1) build and Space65 color filling instructions! I really want to try that myself after watching his amazing video.


I saw that last night, very good stuff, I would do same thing to mine.. if I had one :(

Indeed Wildcat has super high quality content all across the board
Yep, I've been following him on youtube and instagram for a long time.
9100 | 2070s 3070? | 2x 1TB SSD | Z390 Aorus Pro ITX | 16GB RAM | SFX 600W | Philips 40" 4K BDM4065UC | Sentry 2.0
Realforce R2 55g Novatouched+Deskeys #3 | CM QuickFire Rapid Frosty Flake MX Blacks | DROP CTRL High Profile w/ Glorious Holy Pandas| Model M | Logitech MX518 Legend | X52 PRO
SA: Carbon, Penumbra, 7bit's Round6, Amber Screen Cherry: OG caps XDA: Canvas MDA: Big Bone MT3: Serika

 ::: Phinix Cube ::: Phinix Nano Tower ::: Phinix Aurora ::: Phinix Chimera ::: Phinix Retro :::
star citizen :::  CMDR Phinix 325A LTI

Offline oldcat

  • Posts: 2629
  • Location: US
  • 65% is Life
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #289 on: Fri, 29 May 2020, 23:53:39 »
Passing information for AirPotter:

No updates this week. Still waiting for CNC machining to finish, will have some updates next week regarding the completion of CNC and transitioning to surface treatment hopefully.

Offline heartbreak

  • Posts: 28
  • Location: US
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #290 on: Sat, 30 May 2020, 03:24:36 »
Passing information for AirPotter:

No updates this week. Still waiting for CNC machining to finish, will have some updates next week regarding the completion of CNC and transitioning to surface treatment hopefully.
Since it’s ahead of the schedule, when is it likely to ship?

Offline oldcat

  • Posts: 2629
  • Location: US
  • 65% is Life
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #291 on: Sat, 30 May 2020, 15:24:36 »
Passing information for AirPotter:

No updates this week. Still waiting for CNC machining to finish, will have some updates next week regarding the completion of CNC and transitioning to surface treatment hopefully.
Since it’s ahead of the schedule, when is it likely to ship?

If CNC machining is finished the first week of June, then give each color a week to finish processing, it will be 7-8 weeks, so we are probably looking at late July. I will closely monitor the progress.

Offline oldcat

  • Posts: 2629
  • Location: US
  • 65% is Life
Re: [GB] Space65 - CyberVoyager | 65% Custom Keyboard (CNC Machining)
« Reply #292 on: Wed, 10 June 2020, 22:48:53 »
Update from AirPotter:

All CNC completed, crystal bead sandblasting is in process. Have asked him to update and share some images soon.

Offline AIRPOTTER

  • Thread Starter
  • Posts: 468
  • Owner of Gray Studio
6/14:

Anodization and Electrophoresis are in progress.

Here are some anodization color testing/matching samples:


Offline stein3

  • Posts: 73
HYPE

that navy looks great! I'm glad I chose it.

Offline Missingnumber

  • Posts: 75
  • Location: VA, USA
That top pink one looks so nice. I wish it had been one of the options. I wasn't brave enough to go Schrödinger for fear of getting camouflage or something like that. I'm still happy with my choice of black gold with an extra pink badge.

It's hard to find 65% high end boards with split space bar options. Thank you for making this!

Offline Adelscott

  • Posts: 176
  • Location: ISO-FR
6/14:

Anodization and Electrophoresis are in progress.

Here are some anodization color testing/matching samples:

Show Image


Nice ! But I hope that blue will get closer to the render !


Offline willyG

  • Posts: 23
Will there be extra vibration reduction pads available? My dumbass forgot to order an extra with my addon PCB and plate... really hoping so

Offline grimmaniac

  • Posts: 10
6/14:

Anodization and Electrophoresis are in progress.

Here are some anodization color testing/matching samples:

Show Image


Nice ! But I hope that blue will get closer to the render !

Show Image


Me too. I hope it's a Schrödinger and not the Ocean.

Offline oldcat

  • Posts: 2629
  • Location: US
  • 65% is Life
6/14:

Anodization and Electrophoresis are in progress.

Here are some anodization color testing/matching samples:

Show Image


Nice ! But I hope that blue will get closer to the render !

Show Image


Me too. I hope it's a Schrödinger and not the Ocean.

Unsure atm but will share info soon as it releases.