[IC]JRIS75-Quick Disassembly&Adjustable Gasket Mount Keyboard GB is live Now

[Mykeyclub]

Hello Everyone,

Thank you for your support and patience for the JRIS75 project. The GB will finally be launched within 3 days.
Please check the following GB information.

                                                                                                                                                                                                                     

JRIS75 Group Buy Information

SKUs and pricing

There are a lot of variations, please check it out carefully.

The pricing does not include any tax and shipping fee. Some vendors' prices may adjust slightly due to import tax and exchange rate,
but the total cost will be cheaper than ordering from the Mykeyclub website.

GB Time

February 25th,2023 to March 12th, 2023

Limited QTY

3k Limited QTY Worldwide for Faster and Better Delivery

Estimated Delivery

Start packing and sending to vendors and Mykeyclub direct customers in June 2023

                                                                                                                                                                                                                     

Vendor List

US: KeebsForAll

Canada: Deskhero

EU: Candykeys

UK: Prototypist

South American: LatamKeys

Oceania: SwitchKeys

South Korea: Monstargear

Japan: Basekeys

Singapore: Kex Keyboards

Indonesia：KeebsMark

Thailand: NTCH Keys

Malaysia: Rebult Keyboards

Vietnam: MOKB STORE

Philippines：Zion Studios

Bangladesh: KeyB

Taiwan: 鍵盤好貴

Rest of the world: Mykeyclub

Please check the extracted GB info from the vendor you plan to order.

                                                                                                                                                                                                                     

JRIS75 Information

JRIS75 Product Pages

Prototype photos

Black Case

White Case

Pink Case

Lilac Case

Silver Case With Silver PVD Mirror Weight

Silver Case with Black PVD Mirror Weight

Silver Case with Gold PVD Mirror Weight (By whnkeys)

Milky White Case with Black PVD Mirror Weight

Purple&Black Case with PVD Chroma Mirror Weight

Wine Red&Black Case

Blue&Black Case

Grey&Black Case

Add-ons&Accessories

Render Album

                                                                                                                                                                                                                     

Specifications:

Typing angle: 7°

Front height: 21 mm

Material: Full CNC 6063 aluminum

Both PCB and plate adopt flex cut design

QMK/VIA Supported（wired）

Support PCB stabilizers

Dimension: 325*142*39mm

Structure:PCB Gasket

                                                                                                                                                                                                                     

Features:

1.New gasket mounting system ---3 installation ways for different hardness needs bring you three different typing experiences.

2.A more convenient quick disassembly design and adjustable quick disassembly force make your DIY process more convenient and fun.

3.Budget-friendly price, high performance, better-customized experience, and lower threshold allow everyone to experience higher-end customization.

4.Full CNC aluminum case, internal brass weight, enhancing the overall stability and sound performance.

5.Simple and clean design---continuing the dual-weight design of JRIS65 but Blank Back Weight.

6.Swap switch, rotary knob, Badge, and LED light sign assembly.
Give you define more possibilities and more individual and diverse appearance options to meet the cool trend needs.

                                                                                                                                                                                                                     

The GB units will make some improvements compared to the prototype:

1.Add the alignment pins where the gasket silicone column is installed, so the internal will not move up or down after assembly.

2.Changed the per-key flex cut plate to a regular flex cut to avoid the PCB may hits the bottom case and improving the typing sound.

3.Include a Customized Masking Tape to mod the flex-cut PCB for a better typing sound.

4.Adjusting the hotswap PCB socket direction of the multi-layout Hotswap PCB to be compatible with the 6.25U and 7u

5.The two bottom-case foams will change one of them as no cut foam.

6.The GB unit of the Per key flex cut PCB will adopt the red line instead of the gold line.

                                                                                                                                                                                                                     

What can you customize for JRIS75?

11 Case Options:

Purple&Black

White                                                                                               Milky-White

Pink                                                                                               Lilac

Silver                                                                                               Black

Orange&Black                                                                                   Grey&Black

Blue&Black                                                                                       Wind Red&Black

7 Weight Options:

Anodized Alu Weight:Black/Silver/Gold

PVD Mirror Stainless steel Weight: Black/Silver/Gold/Chroma

5 PCBs Options:

Flex Cut PCBs:

Multi layout Black core Hotswap&Solder PCB supports QMK/VIA

ANSI layout 5.2 Bluetooth Hotswap PCB supports LDN Software

BT PCB is cooperating with Li Dana. LDN’s PCB is famous in China because his PCBs are stable and qualified and use friendly.
It has its drive and software, which can edit the key mapping and layers. Please check the software driver interface here.

1. 8 devices can pair with at the same time, and it is easy to switch devices you want.

2. The power switch is on the PCB, easy to turn BT function on/ off.

3. The fastest response time is only 1.25ms

4. The polling rate for the BT PCB is 1ms/1000hz

5. The battery is 4400mA,  bigger battery compartment, more robust wireless mode range.

Note: We highly recommend using a PC/ POM/FR4 plate for BT PCB
because the Brass and ALU plate will have a little affection for connectivity.

Non-flex Cut PCB:

ANSI layout Black core Hotswap PCB with RGB Per Key, supports QMK/VIA

Per Key Flex Cut PCB( Add-ons only)

ANSI layout Black core Hotswap PCB with Per Key Flex Cut, supports QMK/VIA

The GB unit of the Per key flex cut PCB will adopt the red line instead of the gold line.

5 Plate Options:

Flex Cut Plates: FR4/ALU/Brass(Brass Plate Add-ons Only)

The regular FR4 plate is upgrading to the black core martial at the same price.

Non-flex Cut Plates: PC/POM

Plateless Build Options:

We highly suggest building plateless with solder PCB, 5mm extra plate foam
and bottom case foam.
The 5mm extra plate foam will bring a more soft typing feel, and the typing sound will be cleaner.
But without the 5mm plate foam, it will also work fine, and the typing feel and sound are very different.

                                                                                                                                                                                                                     

What's in package?

1x Full CNC Aluminum Case

1x Brass internal weight

2 x Weights: Anodized Alu Weight/ Stainless steel PVD Weight

1 x PCB Hotswap/ Soldered/ Bluetooth

1x Plate (PC/ FR4/ Alu/POM)

2x Poron Case Foam

1x Poron Plate Foam

1x IXPE Foam

26x Gasket Silicone column

1xType-C Daughterboard

1x JST Cable

1 Set Anti-Shock Silicone Pad

1 Set of Footpad

Gift(will not send make-up or replacements)

1x Customized Carrying Case

1x Customized Type-C Cable

1x Silicone pad of battery compartment (Only for the wired version )

2x 2200mAh Battery（Only for the Bluetooth version）

1x Customized PVD Artisan keycaps

1x Aluminium Alloy Screwdriver with 2 replaceable bits

1x 2 in 1 Switch puller and Keycap puller

1x Customized Masking Tape(Fit the flex cuts in the PCB perfectly.)

Available Optional Extras：

PCB Kit(Hotswap/ Hotswap with RGB/ Soldered/ Bluetooth/Per Key Flex Cut PCB)

Plate (PC/ FR4/ Alu/POM/Brass)

Weight

PVD Protectors kit

Brass PVD Rotary Knob: Snowflake/ Four-leaf Clover/ Flower/Blank

Brass PVD Badge: Iris/ Leaf / Butterfly/Blank

Brass PVD LED Light Sign

                                                                                                                                                                                                                 

Review List

Keybored--White with PVD Glod + Wrist Rest

Switch and Click--Milky-White with PVD Chroma + Wrist Rest

:3ildcat--Pink with PVD Chroma + Wrist Rest

alexotos--Purple&Black with PVD Silver

nearLucid--Silver with PVD Chroma

Yo_keebs--Lilac with PVD Chroma

whnkeys- Custom Tastaturen--Silver with PVD Chroma

bored bear--Pink with PVD Silver

mmorpg.com--Wine Red&Black with PVD Gold

prototypist--Purple&Black with PVD Chroma

Mecha Store--Lilac with PVD Chroma

kittykatmechkey--Purple&Black with PVD Silver

Rx003--Wine Red&Black with PVD Silver

There some issue with the prototype, but no worries, the GB units will be fixed.

                                                                                                                                                                                                                 

Mykeyclub Team

We are a platform that integrates creativity and innovative design, helping more studios join this hobby community and bringing more fun and cool products to you guys.
Please participate in our MKC family for more discussions and future updates.

Mykeyclub discord

Mykeyclub Ins

Best Wishes

Mykeyclub Team

[aicyborg]

Not for me because you've dropped hotswap ISO, despite the fact on the Jris65 you had it so evidently can do it and already have the engineering done for the PCB.

Hotswap ISO is available on the QK75 which you're directly competing with, so maybe reconsider? It's fine if I need a different PCB but please don't treat ISO like second class.

[DaaDaa]

Well done guys , board looks great, fantastic price and most importantly great layout. I prefer this layout to the exploded one so this design is working for me. When would be your earliest convenience to be take my money?

[BigGirthy]

Here are some of my thoughts and opinions on the aesthetics that I’d like to pass along for consideration. I’ll be following the progress on this design closely.

Layout:  Excellent choice! This layout for a 75% is very pleasing to the eye because it’s highly symmetric and has clean lines.

Visible weight accent:  The thicker hexagon in the middle isn’t consistent with the clean lines of the top layout and the bottom weight. A simpler rectangle with a single thickness like what was done on the JRIS65 would be more cohesive and elegant.

Weight fonts:  My sense from the JRIS65 IC and from some comments here is that changing the script font on the bottom would appeal to a wider audience. The other issue is the font pictured on the internal weight is mismatched with that used on the bottom. I’d remove the bottom font altogether (leave it blank) or replace it with the font/logo used on the internal weight render.

Knob: Please offer a blank knob or provide exact dimensions so we can buy a third party blank knob.

Thanks for reading!

[Tokyo-65]

Thank you, thank you, thank you for NOT following every other 75% that has come out recently with an exploded layout. Looking forward to it.

[Mykeyclub]

Well done guys , board looks great, fantastic price and most importantly great layout. I prefer this layout to the exploded one so this design is working for me. When would be your earliest convenience to be take my money?

Our group buy may start at the end of December or the beginning of January, you can follow our discord, we will update the latest news in it.

[Mykeyclub]

Not for me because you've dropped hotswap ISO, despite the fact on the Jris65 you had it so evidently can do it and already have the engineering done for the PCB.

Hotswap ISO is available on the QK75 which you're directly competing with, so maybe reconsider? It's fine if I need a different PCB but please don't treat ISO like second class.

We understand your point, and we don't treat ISO as second-class. We also want to make this happen like Jris65 to meet more customers' needs, but the current PCB is very difficult to support both ASIN and ISO layouts.  And we will discuss this again. Thank you for your suggestion.

[Mykeyclub]

Here are some of my thoughts and opinions on the aesthetics that I’d like to pass along for consideration. I’ll be following the progress on this design closely.

Layout:  Excellent choice! This layout for a 75% is very pleasing to the eye because it’s highly symmetric and has clean lines.

Visible weight accent:  The thicker hexagon in the middle isn’t consistent with the clean lines of the top layout and the bottom weight. A simpler rectangle with a single thickness like what was done on the JRIS65 would be more cohesive and elegant.

Weight fonts:  My sense from the JRIS65 IC and from some comments here is that changing the script font on the bottom would appeal to a wider audience. The other issue is the font pictured on the internal weight is mismatched with that used on the bottom. I’d remove the bottom font altogether (leave it blank) or replace it with the font/logo used on the internal weight render.

Knob: Please offer a blank knob or provide exact dimensions so we can buy a third party blank knob.

Thanks for reading!

Thank you so much for your sincere suggestion. We will discuss this with the team.

[aicyborg]

We understand your point, and we don't treat ISO as second-class. We also want to make this happen like Jris65 to meet more customers' needs, but the current PCB is very difficult to support both ASIN and ISO layouts.  And we will discuss this again. Thank you for your suggestion.

I don't understand why it'd be hard to do when you have literally already done it on the JRIS65, but I'll drop that issue. If you have to, could you do an ISO-specific PCB instead? It'd be really nice.

[alper_maestro]

Looks nice and I'm seeing some elements from the QK75 board.
Please consider blank Knob and badges also or with other more subtile design.

[Mykeyclub]

We understand your point, and we don't treat ISO as second-class. We also want to make this happen like Jris65 to meet more customers' needs, but the current PCB is very difficult to support both ASIN and ISO layouts.  And we will discuss this again. Thank you for your suggestion.

I don't understand why it'd be hard to do when you have literally already done it on the JRIS65, but I'll drop that issue. If you have to, could you do an ISO-specific PCB instead? It'd be really nice.

Thanks again for your suggestion. We are still discussing adding the Hotswap PCB that supports the ISO layout. We will keep this updated. JRIS75 is more difficult to line the PCB compatible with both layouts like JRIS65. Please understand if we can do this way to meet more customers' needs. We will do it. Thanks

[Mykeyclub]

Thank you, thank you, thank you for NOT following every other 75% that has come out recently with an exploded layout. Looking forward to it.

Welcome aboard

[alper_maestro]

What is the total weight of the board? (When fully build or barebone)

[ThatDudeLou]

Interesting, it uses the catchball system like in the Matrix Corsa. Thats pretty cool.

[Mykeyclub]

Interesting, it uses the catchball system like in the Matrix Corsa. Thats pretty cool.

Thanks:)

[lvl2cow]

Interesting, it uses the catchball system like in the Matrix Corsa. Thats pretty cool.

catch ball system is a NUT

[feralfoo]

Any chance of multiple hardness levels for the gasket silicone columns? This way you can not only change the typing experience by increasing/decreasing the number of columns, but also changing the hardness of the columns themselves.

Thoughts?

[Mykeyclub]

Any chance of multiple hardness levels for the gasket silicone columns? This way you can not only change the typing experience by increasing/decreasing the number of columns, but also changing the hardness of the columns themselves.

Thoughts?

Yes, the gasketed silicone columns will have three hardness levels.You can adjust the hardness by increasing/decreasing the number of columns.

[Mykeyclub]

Any chance of multiple hardness levels for the gasket silicone columns? This way you can not only change the typing experience by increasing/decreasing the number of columns, but also changing the hardness of the columns themselves.

Thoughts?

There is only only one hardness level for the gasket silicone columns for the moment. Your thought is very interesting, and we will discuss this.

[Mykeyclub]

We understand your point, and we don't treat ISO as second-class. We also want to make this happen like Jris65 to meet more customers' needs, but the current PCB is very difficult to support both ASIN and ISO layouts.  And we will discuss this again. Thank you for your suggestion.

I don't understand why it'd be hard to do when you have literally already done it on the JRIS65, but I'll drop that issue. If you have to, could you do an ISO-specific PCB instead? It'd be really nice.

Hello, I am glad to tell you that we have overcome the technical difficulties and now the Hotswap PCB supports ISO layout.

[alper_maestro]

I just looked at the product page on your website. It is not clear to me whether all pcb options comes with per-key RGB or only 1 version of it. Suppose I want the hotswap bluetooth version, is that also per-key RGB? And does the bluetooth version also have QMK/VIA support (via cable)?

I have asked before but have not had a response to date, what is the total weight of this board?

Can we expect more videos also from famous youtubers?

Thanks in advance.

[menuhin]

More

We understand your point, and we don't treat ISO as second-class. We also want to make this happen like Jris65 to meet more customers' needs, but the current PCB is very difficult to support both ASIN and ISO layouts.  And we will discuss this again. Thank you for your suggestion.

I don't understand why it'd be hard to do when you have literally already done it on the JRIS65, but I'll drop that issue. If you have to, could you do an ISO-specific PCB instead? It'd be really nice.

Hello, I am glad to tell you that we have overcome the technical difficulties and now the Hotswap PCB supports ISO layout.

Another killer feature accomplished, for another killer product for the current market!

[aicyborg]

Hello, I am glad to tell you that we have overcome the technical difficulties and now the Hotswap PCB supports ISO layout.

Thank you for that. I now have no choice but to buy one, which is good because I wanted to anyway.

[Mykeyclub]

Thanks for the support.

[alper_maestro]

Thanks for the support.

Hi, can you check my last post and please answer my questions? Thanks in advance.

[Mykeyclub]

Only one PCB comes with per-key RGB, and the BT PCB does not come with per-key RGB and only supports LDN software.

Yes, you can expect more videos also from famous YouTubers.

The total weight is about 2KG before built and 2.5 kg after built.

[Mykeyclub]

Thanks for the support.

Hi, can you check my last post and please answer my questions? Thanks in advance.

Only one PCB comes with per-key RGB, and the BT PCB does not come with per-key RGB and only supports LDN software.

Yes, you can expect more videos also from famous YouTubers.

The total weight is about 2KG before built and 2.5 kg after built.

[alper_maestro]

Thanks for the support.

Hi, can you check my last post and please answer my questions? Thanks in advance.

Only one PCB comes with per-key RGB, and the BT PCB does not come with per-key RGB and only supports LDN software.

Yes, you can expect more videos also from famous YouTubers.

The total weight is about 2KG before built and 2.5 kg after built.

Thanks for your reply and answers.

Is there a specific reason why only 1 PCB comes with per-key RGB? Because it would be more convenient if both hotswap options had the same RGB functions and support. So that you can choose to have one with BT support or only wired.  Can you give more background information about that?

[Mykeyclub]

Because of some production reasons and the PCB warranty, we cannot offer Per-key RGB for all PCBs. Hope you can understand. Thanks.

[Oni74]

Great layout, great options, great pricing. Very much interested in this.

One feedback: it would be great if the blue case can be darker - a deep navy is preferred over the lighter shade represented in the renders.

[Mykeyclub]

Thanks for your suggestion.

[alper_maestro]

Great layout, great options, great pricing. Very much interested in this.

One feedback: it would be great if the blue case can be darker - a deep navy is preferred over the lighter shade represented in the renders.

Thanks for your reply. Definitely interested in this board. One feedback only; isn't the height of the front a bit too high from an ergonomic point of view? It says 22mm where most boards stay just under 2cm. Thanks in advance and have a nice day.

[moh18one]

Wonder why the front height and typing angle are increased in this model, which is quite unfortunate.

[Abraham]

  take my wallet

[rondg]

Wonder why the front height and typing angle are increased in this model, which is quite unfortunate.

I suspect that the mounting style of this one is the reason why. It's very different from the 65

[Mykeyclub]

Thanks for your feedback. 22 mm includes the footpad, and one primary reason is the Quick Disassembly Structure.

[Mykeyclub]

take my wallet

Thanks for your support.

[Ikeygai Designs]

that led badge is LIT!

[Mykeyclub]

that led badge is LIT!

Thank you

[Mykeyclub]

Thank you for your supports.

[Mykeeb]

Looks sick!

[alper_maestro]

I saw your update in the first post .

Will the RGB per key added to all PCB options or am I mistaken?

Also one suggestion:

For the visible weight accent: The thicker hexagon in the middle isn’t consistent with the clean lines of the top layout and the bottom weight. A simpler [rectangle] design would be more elegant.. Also it must match the bottom weight color. So if you choose PVD Chroma Weight for example, the visible weight accent must be the same color.

[mr_foggy]

how thick is the PCB? 1.6 or 1.2mm?

[Mykeyclub]

I saw your update in the first post .

Will the RGB per key added to all PCB options or am I mistaken?

Also one suggestion:

For the visible weight accent: The thicker hexagon in the middle isn’t consistent with the clean lines of the top layout and the bottom weight. A simpler [rectangle] design would be more elegant.. Also it must match the bottom weight color. So if you choose PVD Chroma Weight for example, the visible weight accent must be the same color.

The RGB per key is not added to all PCB. Only one kind of PCB comes with the per-key RGB.

[Mykeyclub]

how thick is the PCB? 1.6 or 1.2mm?

1.2MM pcb

[alper_maestro]

I saw your update in the first post .

Will the RGB per key added to all PCB options or am I mistaken?

Also one suggestion:

For the visible weight accent: The thicker hexagon in the middle isn’t consistent with the clean lines of the top layout and the bottom weight. A simpler [rectangle] design would be more elegant.. Also it must match the bottom weight color. So if you choose PVD Chroma Weight for example, the visible weight accent must be the same color.

The RGB per key is not added to all PCB. Only one kind of PCB comes with the per-key RGB.

Thanks for clarifying

where are we about currently with the process and when can we see a real working unit on youtube?

[Mykeyclub]

I saw your update in the first post .

Will the RGB per key added to all PCB options or am I mistaken?

Also one suggestion:

For the visible weight accent: The thicker hexagon in the middle isn’t consistent with the clean lines of the top layout and the bottom weight. A simpler [rectangle] design would be more elegant.. Also it must match the bottom weight color. So if you choose PVD Chroma Weight for example, the visible weight accent must be the same color.

The RGB per key is not added to all PCB. Only one kind of PCB comes with the per-key RGB.

Thanks for clarifying

where are we about currently with the process and when can we see a real working unit on youtube?

You can expect to watch the review videos at the end of January or early February.

[Mykeyclub]

Looks sick!

Thanks

[Mykeeb]

Looks sick!

Thanks

can't wait for the GB.

[Mykeyclub]

Looks sick!

Thanks

can't wait for the GB.

We will keep you updated.