Double shot replacements ROUND THREE: Vote for Kits & Quantities!

[Kevtav]

Payment Sent!

[ogreofdakka]

if theres a noppoo solution i would be interested as well.

[7bit]

I will be back home on Sunday and can measure No Mini poopoo then if you like; somebody send me a PM on Saturday to remind me.

if theres a noppoo solution i would be interested as well.

[bakageta]

The Noppoo spacebar is 5.5 keys long, the switch is centered, and the center of the stabilizers are ~43mm from the center. Are those the measurements you needed?

[guilleguillaume]

I can try to take off the Noppoo Spacebar and make photos with some measures in it. Here in europe we work with mm and cm I hope this is not a problem.

[7bit]

The Noppoo spacebar is 5.5 keys long, the switch is centered, and the center of the stabilizers are ~43mm from the center. Are those the measurements you needed?

Did you measure the distances between the centers of the key mounts?

I mean, like in this graphic:

[n12]

Offering $5 via Paypal to anyone who can answer my question here. PM me w/e your Paypal address is.

[guilleguillaume]

7bit I have the Spacebar in my hand

My first spacebar with those stabilizers taken out!

I can measure all you need and make pics. I have to measure from the center of the stem I supose.

[bakageta]

Did you measure the distances between the centers of the key mounts?

I mean, like in this graphic:
http://geekhack.org/attachment.php?attachmentid=15105&d=1295992891

Yep, I did, but I'm questioning my measurements now, something seems off... I was in a bit of a rush, since I'm getting ready for work. I'll take it back apart after work tonight, and take a few pics while I'm doing it.

[hoggy]

Payment sent!

[7bit]

7bit I have the Spacebar in my hand

My first spacebar with those stabilizers taken out!

I can measure all you need and make pics. I have to measure from the center of the stem I supose.

Yes! I need the measures from center to center.

Thanks for doning this.

[guilleguillaume]

Well I did the measures.

I did my best and tried to look 3 times the same measurement just to be sure. Anyway I would prefer that other Noppoo owners do their measurements  to compare for no errors.


I stole your pic and modded it a bit with the clone option in gimp:



It's not in real size. Only for show the measures I did.

It's about the size of 5 and 2/3 of the 6 single key.

[kidchunks]

If I already sent payment but wanted to add/remove something? Would that be possible?

[7bit]

If I already sent payment but wanted to add/remove something? Would that be possible?

Add as much as you want! The more, the better!!!

:-)

Well I did the measures.

I did my best and tried to look 3 times the same measurement just to be sure. Anyway I would prefer that other Noppoo owners do their measurements  to compare for no errors.


I stole your pic and modded it a bit with the clone option in gimp:

Show Image

It's not in real size. Only for show the measures I did.

It's about the size of 5 and 2/3 of the 6 single key.

Thanks a lot!

I will forward this to SP and hope they can make it.

[manfaux]

oh look, it's wednesday! Where is Melissa?

[guilleguillaume]

Add as much as you want! The more, the better!!!

:-)



Thanks a lot!

I will forward this to SP and hope they can make it.

Just to be sure...The pic it's not in right proportions, it was a Ghetto pic

I hope bakageta can confirm with her measures what I showed just to be 100% sure that those are the sizes so if SP tell us they can make it we can confirm them the exact measures. We don't want to receive bad spaces just for 1 mm error :party:

[bakageta]

Just to be sure...The pic it's not in right proportions, it was a Ghetto pic

I hope bakageta can confirm with her measures what I showed just to be 100% sure that those are the sizes so if SP tell us they can make it we can confirm them the exact measures. We don't want to receive bad spaces just for 1 mm error :party:

That's exactly what I came up with earlier, I thought maybe I had measured wrong since the other bars have the stabilizers 9.5mm from the edge and the noppoo is only 8mm.

[squarebox]

Will measure my Noppoo as well tonight.
If noppoo spacebar is confirmed, I will join in too

[Lpb45]

hey 7bit,

I take it "Deadline for orders: Not before 7th March 2011!" means that we have until march 7th to place orders?

I already placed an order for a gaming kit gotten my invoice and paid it but since there is more time with the march 7 deadline I want to get a standard set aswell, how will that work?  Will you just issue me a seperate invoice since I already paid for what I have ordered to this point?

[wanabe]

i'm officially in.  just sent payment

[Megaweapon]

Do we have precise colors for DARKBLUE and LIGHTBLUE yet?

Bump.  These numbers don't add up and I would like to know what I'm ordering before sending money...

WHITEONBLUE.................14
LIGHTBLUE....................3
DARKBLUE.....................2

[kidchunks]

Anyone know which space bar would work for a G80-8113?

Update:
Crap, its the same size as a filco/ducky space bar but the stems alignment is different. I don't think that space bar is available. Could it be SPACEOLD?

[7bit]

hey 7bit,

I take it "Deadline for orders: Not before 7th March 2011!" means that we have until march 7th to place orders?

I already placed an order for a gaming kit gotten my invoice and paid it but since there is more time with the march 7 deadline I want to get a standard set aswell, how will that work?  Will you just issue me a seperate invoice since I already paid for what I have ordered to this point?

If I got remaining infos I need to know, I will order at 8th March 2011. You could still jump on the train afterwards, because we will let them produce some extra kits, but these might sell out quite quickly.

Again, just vote for your extras and you will receive a new invoice.

[7bit]

Bump.  These numbers don't add up and I would like to know what I'm ordering before sending money...

WHITEONBLUE.................14
LIGHTBLUE....................3
DARKBLUE.....................2

Ah, sorry, we decided on lightblue. I asked everybody who was into those WHITEONBLUE and BLUEONWHITE kits and the majority wanted lightblue. I will look for a color sample, ...

[7bit]

Anyone know which space bar would work for a G80-8113?

Update:
Crap, its the same size as a filco/ducky space bar but the stems alignment is different. I don't think that space bar is available. Could it be SPACEOLD?

If in doubt, just measure it. But I think it should be the normal Filco/Ducky/G80-3000 space bar.

How long is it, to start with?

[kidchunks]

if in doubt, just measure it. But i think it should be the normal filco/ducky/g80-3000 space bar.

How long is it, to start with?

118 mm
11.8 cm

[Soarer]

If the 8113 has the same spacebar as the 8200, then is it the middle stem that's off?

This is Filco (top) and 8200... I glued an extra central stem on it so it would fit the Filco...

[kidchunks]

If the 8113 has the same spacebar as the 8200, then is it the middle stem that's off?

This is Filco (top) and 8200... I glued an extra central stem on it so it would fit the Filco...

Show Image

Photo is perfect for what I was trying to explain!

I want to buy a spacebar for the 8113. I don't think that space bar is available in the group buy (with an off center stem).

[Soarer]

The thing is, I want to buy a spacebar for the 8113. I don't think that space bar is available in the group buy (with an off center stem)

I don't think one is either, but maybe it could be added? All depends on what SP can do. Annoyingly, I think it's like the POS one in stem spacing, but without the overhang at the rhs.

I just posted that because gluing a stem on is a viable solution, and quite easy if you take your time. I used 2-part epoxy, and fitted the spacebar to the keyboard before it was set, which made sure the alignment was spot on. You don't need to chop the old stem out, so you end up with a dual fitment spacebar.

[7bit]

Photo is perfect for what I was trying to explain!

I want to buy a spacebar for the 8113. I don't think that space bar is available in the group buy (with an off center stem).

The space bar below looks pretty much like the standard space bar:

SPACEGREY 1
or
SPACEBLACK 1

[kidchunks]

It looks like the standard spacebar except the center stem is "not" in the center. I took a picture which I'll post it a bit later.

[7bit]

It looks like the standard spacebar except the center stem is "not" in the center. I took a picture which I'll post it a bit later.

It took me a while to find it:

[kidchunks]

Sweet thanks 7bit! Thats exactly the space bar my 8113 has (the one above the filco closest to the ruler)

So will the SPACEGREY have 4 stems moldings in total? Is the grey spacebar on top of the ruler from the previous round?

[7bit]

Sweet thanks 7bit! Thats exactly the space bar my 8113 has (the one above the filco closest to the ruler)

So will the SPACEGREY have 4 stems moldings in total? Is the grey spacebar on top of the ruler from the previous round?

Yes and yes and it will be the same in this round.

[kidchunks]

Yes and yes and it will be the same in this round.

Nice! Thanks for clearing that up!

Off I go to make changes to my order! :smile:

[manfaux]

hi 7bit, are we getting the separate invoices yet for the blank SP key caps?

[blainchen]

Hi 7bit,
I don't want to blow this up even more, but:
Is there any possibility that you ask signature for getting a chain with the different colors they have?
I need one of these things for an ongoing project, to choose the color which suits me most.

Would be really great, if you can ask them for that.

[n12]

Hey guys - sorry if this question has been answered, but I can't seem to figure this out for sure & I want to make sure I vote/order properly.

Is it possible to get either of these color combos with the packages that are up for ordering and what would my vote be?

http://imgur.com/a/3S1nq

The keys that are shown as blank in the top picture would be blank keys(so all of them...) and in the second picture only the orange keys would be blank and the rest would be black printed keys. I would be willing to do printed keys for either of them if there weren't any more blanks available or printed keys were drastically cheaper.

I'm looking to order one set of the standards for one of my Filco's and one of the combos mentioned above for another. Thanks for the help in advance!

Anyone?

[7bit]

hi 7bit, are we getting the separate invoices yet for the blank SP key caps?

Aloha is over on Monday and SP has got back their sales department!

Hi 7bit,
I don't want to blow this up even more, but:
Is there any possibility that you ask signature for getting a chain with the different colors they have?
I need one of these things for an ongoing project, to choose the color which suits me most.

Would be really great, if you can ask them for that.

I will ask her for those color-samples.

It's hard to blow up #1177 post threads in my experience.

Why in the OCN Mechanical Keyboard Guide thread (currently at #11,182)  it's like Pissing in the Pacific.

Stop pissing into my ocean!!!

Anyone?

Picture?

[7bit]

...
Why in the OCN Mechanical Keyboard Guide thread (currently at #11,182)  ....

Show Image

I'm just realizing that you posted more than twice as much @ GeekHack than all of the Overclocker kids in their Mechanical Keyboard Guide thread.

[blainchen]

...

I will ask her for those color-samples.

...


Picture?

That's great!

Thanks a lot.

[Twitchy]

Hey guys - sorry if this question has been answered, but I can't seem to figure this out for sure & I want to make sure I vote/order properly.

Is it possible to get either of these color combos with the packages that are up for ordering and what would my vote be?

Show Image

Show Image

The keys that are shown as blank in the top picture would be blank keys(so all of them...) and in the second picture only the orange keys would be blank and the rest would be black printed keys. I would be willing to do printed keys for either of them if there weren't any more blanks available or printed keys were drastically cheaper.

I'm looking to order one set of the standards for one of my Filco's and one of the combos mentioned above for another. Thanks for the help in advance!

I think that the second set would require the STANDARDBLACK set which has been dropped, but the first looks like a combination of ORANGEBLANK (blank orange single-sized keys), BLACKBLANK (blank black single-sized keys), and BLACKBLANKMOD (blank black non single-sized keys). You would need all three sets.

[n12]

I think that the second set would require the STANDARDBLACK set which has been dropped, but the first looks like a combination of ORANGEBLANK (blank orange single-sized keys), BLACKBLANK (blank black single-sized keys), and BLACKBLANKMOD (blank black non single-sized keys). You would need all three sets.

Appreciate it!

:grouphug:

[Ekaros]

Hmm, noew moar questions:

So, if I send my new shipping address to the invoice-emailer does it get updated? And does it matter if I already wasted my money by sending them to iMav?

[7bit]

Hmm, noew moar questions:

So, if I send my new shipping address to the invoice-emailer does it get updated? And does it matter if I already wasted my money by sending them to iMav?

How should I know it is you sending in the new shipping address?

ps: yes it gets updated.
ps/2: I'm not sure what you mean with your 2nd question. You'vce sent money to iMav and think of it as a waste?

[Ekaros]

How should I know it is you sending in the new shipping address?

ps: yes it gets updated.
ps/2: I'm not sure what you mean with your 2nd question. You'vce sent money to iMav and think of it as a waste?

Thanks, will get it sorted.

PS/2 answer: Just making sure there hasn't been any major process considering these, as I already paid my part...
PS/N. Also don't you think almost 100€ for some pieces of plastic isn't waste?

[7bit]

Thanks, will get it sorted.

PS/2 answer: Just making sure there hasn't been any major process considering these, as I already paid my part...
PS/N. Also don't you think almost 100€ for some pieces of plastic isn't waste?

100€ is just a piece of paper. It is not even large enough to serve as wrapping paper for the key caps!

It's like giving glass pearls for gold!

ps: Don't worry about changing the shipping address, you will get a notification about your shipping address, before iMav puts the sticker on your package.

[manfaux]

Aloha is over on Monday and SP has got back their sales department!

nice, thanks for the quick reply ! These SP people need to get back to work.

anyone know will those blank keycaps be compatible with my G80 3xxx? (profile height wise)

[7bit]

nice, thanks for the quick reply ! These SP people need to get back to work.

anyone know will those blank keycaps be compatible with my G80 3xxx? (profile height wise)

I think they match Cherry caps better than Filcos. But they are a bit different.

[digitalleftovers]

Hi 7bit,

I was looking through the sticky for info on shipping, but didn't see any estimates. I thought I saw estimates for CONUS a few weeks ago, but I may have been looking at a different round of orders...  Could you direct me to this information, or will I just receive info when I make my order?  Thank you for doing this!