« previous next »
Pages:  [1]     Go Down

Author Topic: Looking for someone who can design a case for the Phantom  (Read 8923 times)

0 Members and 1 Guest are viewing this topic.

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Looking for someone who can design a case for the Phantom
« on: Tue, 22 November 2011, 10:08:44 »
I am looking for someone who is capable of designing a case that fits all versions of the Phantom. The type of case we are looking at is talked about here http://tinyurl.com/85ma22f . If you have other ideas that would be simpler, easier, or cheaper please bring them up.
Logged

Offline Tarkoon

  • Posts: 94
Looking for someone who can design a case for the Phantom
« Reply #1 on: Tue, 22 November 2011, 10:19:02 »
I am working on something like that in 3D since yesterday with Google SketchUp.
I am no pro, but I think I could do it, but it takes time, because I am working a lot...
AND I would need some numbers because I don't own a Filco! =)
Logged

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Looking for someone who can design a case for the Phantom
« Reply #2 on: Tue, 22 November 2011, 10:22:24 »
Quote from: Tarkoon;457407
I am working on something like that in 3D since yesterday with Google SketchUp.
I am no pro, but I think I could do it, but it takes time, because I am working a lot...
AND I would need some numbers because I don't own a Filco! =)
Sounds great any help is appreciated sadly I dont have a Filco TKL either, lets hope we can get some measurements from someone who does.
Logged

Offline Tarkoon

  • Posts: 94
Looking for someone who can design a case for the Phantom
« Reply #3 on: Tue, 22 November 2011, 10:29:34 »
I started with the plate for the phantom, but I need following sizes:
- distance between 2 holes for the plate mounted switches
- distance between the key blocks (main block, F-Keys, arrow block)
- distance between the key rows
- size of the plate, holes for screws etc.

After that I would go on with the case.
Logged

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Looking for someone who can design a case for the Phantom
« Reply #4 on: Tue, 22 November 2011, 10:33:45 »
Quote from: Tarkoon;457425
I started with the plate for the phantom, but I need following sizes:
- distance between 2 holes for the plate mounted switches
- distance between the key blocks (main block, F-Keys, arrow block)
- distance between the key rows
The size of the plate is still not decided I think, is it?
I dont know about the pate but I would assume that it would be the same size as a Fico's since its meant to fit in that case. Also dont forget that this case needs to fiot all layouts especially 7bits because that is the one that you can not use a stock Filco case for. The updated 7bit layout looks like:

Logged

Offline Tarkoon

  • Posts: 94
Looking for someone who can design a case for the Phantom
« Reply #5 on: Wed, 23 November 2011, 14:50:48 »
I still have no one who supports me with the dimensions...
So this is delayed until I find someone who is willing to help.
Logged

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Looking for someone who can design a case for the Phantom
« Reply #6 on: Wed, 23 November 2011, 15:49:20 »
Quote from: Tarkoon;458380
I still have no one who supports me with the dimensions...
So this is delayed until I find someone who is willing to help.

Sorry I have been trying to get measurements but no one that has a Filco has taken the time to do it.
Logged

Offline litster

  • Posts: 2890
  • rare caps?! THAT'S A SMILIN
Looking for someone who can design a case for the Phantom
« Reply #7 on: Thu, 24 November 2011, 00:14:18 »
Logged

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Looking for someone who can design a case for the Phantom
« Reply #8 on: Thu, 24 November 2011, 23:10:57 »
Quote from: litster;458642
http://www.kbdmania.net/xe/index.php?mid=photo&document_srl=2886339

thanks for the additional pics You have Filcos right? mind submitting some measurements?
Logged

Offline litster

  • Posts: 2890
  • rare caps?! THAT'S A SMILIN
Looking for someone who can design a case for the Phantom
« Reply #9 on: Thu, 24 November 2011, 23:33:07 »
I could do measurements.  But there are a lot of numbers to collect.  Even with all the measurements you need, I don't think you can realistically design a case without actually having a Filco keyboard in front of you.
Logged

Offline Ascaii

  • Posts: 415
  • Location: Berlin, Germany
Looking for someone who can design a case for the Phantom
« Reply #10 on: Sat, 26 November 2011, 08:40:10 »
I was going to do this once I have my Phantom PCB...if I can get exact measurements I could get started now.
Logged
"Mechanical keyboards are like pokemon:
you start with one, and then you wanna catch em all."

Offline litster

  • Posts: 2890
  • rare caps?! THAT'S A SMILIN
Looking for someone who can design a case for the Phantom
« Reply #11 on: Sat, 26 November 2011, 15:01:12 »
Would you use a cardboard case?  ;)

Logged

Offline mbc

  • Posts: 469
  • Location: Germany
  • -delete-
Looking for someone who can design a case for the Phantom
« Reply #12 on: Sat, 26 November 2011, 15:08:40 »
So simple but beautiful
Logged

Offline litster

  • Posts: 2890
  • rare caps?! THAT'S A SMILIN
Looking for someone who can design a case for the Phantom
« Reply #13 on: Sat, 26 November 2011, 15:14:34 »
I spent the whole day on Thanksgiving to make this.  Then yesterday the whole day putting it in QCAD as I learn how to use it.  I am almost done, but I need to draw out one layer to make room for the teensy controller.  Then I need to find a place that can do laser cutting on cardboards and/or acrylic.

Edit: Any recommendation for shops that can do lasercutting?
« Last Edit: Sat, 26 November 2011, 15:44:39 by litster »
Logged

Offline hashbaz

  • Grand Ancient One
  • * Moderator Emeritus
  • Posts: 5057
  • Location: SF Bae Area
Looking for someone who can design a case for the Phantom
« Reply #14 on: Sat, 26 November 2011, 16:00:03 »
Quote from: litster;459280
Would you use a cardboard case?  ;)

Show Image

Haha nice I actually would use that until something more permanent can be arranged since I sold my Filco TKL.
Logged

Offline tsangan

  • ★★★
  • ** Moderator Emeritus
  • Posts: 2754
  • Location: Clack Factory's Dumpster
  • 1000/600
Looking for someone who can design a case for the Phantom
« Reply #15 on: Sat, 26 November 2011, 17:22:45 »
Quote from: hashbaz;459295
Haha nice I actually would use that until something more permanent can be arranged since I sold my Filco TKL.

I'm with you on this, cardboard case till something permanent comes around lol

Quote from: litster;459282
I spent the whole day on Thanksgiving to make this.  Then yesterday the whole day putting it in QCAD as I learn how to use it.  I am almost done, but I need to draw out one layer to make room for the teensy controller.  Then I need to find a place that can do laser cutting on cardboards and/or acrylic.

Edit: Any recommendation for shops that can do lasercutting?


Quote from: slueth;449812
I know a company in Washington that does plastic(http://www.tapplastics.com/)  They said if we had a 3d rendering of it in like autocad we could maybe do it for the phantom.


I think they can do the acrylic after you have the CAD file, Probably going to take a few prototype to get it 100% correct but you can just split that cost with everyone that gets the casing
« Last Edit: Sat, 26 November 2011, 17:30:22 by tsangan »
Logged
Keyboardless

Offline itlnstln

  • Posts: 7048
Looking for someone who can design a case for the Phantom
« Reply #16 on: Sat, 26 November 2011, 18:47:45 »
Quote from: litster;459280
Would you use a cardboard case?  ;)

Show Image

That's awesome.  I would roll with that.
Logged

Offline litster

  • Posts: 2890
  • rare caps?! THAT'S A SMILIN
Looking for someone who can design a case for the Phantom
« Reply #17 on: Thu, 01 December 2011, 03:17:00 »
Logged

Offline bpiphany

  • Posts: 1033
  • Location: Stockholm, Sweden
  • bpiph is a special type of crazy. //mkawa
Looking for someone who can design a case for the Phantom
« Reply #18 on: Thu, 01 December 2011, 04:09:00 »
Quote from: Tarkoon;458380
I still have no one who supports me with the dimensions...
So this is delayed until I find someone who is willing to help.

I send you CAD files both for the plate and the PCB, if that won't be enough to design a case, I don't think anything will be...
Logged

Offline whiskerBox

  • Posts: 1037
Looking for someone who can design a case for the Phantom
« Reply #19 on: Thu, 01 December 2011, 10:17:07 »
Quote from: litster;461835
My cardboard case turned into an acrylic case: http://geekhack.org/showthread.php?23572-Phantom-Custom-Keyboard-Group-Buy-(Order-Only)&p=461761&viewfull=1#post461761


Amazing!! I must read more of this.
Logged
"I'm on a mission to bring down GH's anarchy of moderators" -RIPSTER jr.

Offline Ascaii

  • Posts: 415
  • Location: Berlin, Germany
Looking for someone who can design a case for the Phantom
« Reply #20 on: Thu, 01 December 2011, 14:15:34 »
whoever has the CAD files, please send them to me as well!

ascaii[at]geekhack[dot]org
Logged
"Mechanical keyboards are like pokemon:
you start with one, and then you wanna catch em all."

Offline mbc

  • Posts: 469
  • Location: Germany
  • -delete-
Looking for someone who can design a case for the Phantom
« Reply #21 on: Thu, 01 December 2011, 14:29:15 »
Me, too. Or better place them in the gh wiki or something where every member can grab them.
*Prettyplease*
Logged

Offline digitalleftovers

  • Posts: 645
Looking for someone who can design a case for the Phantom
« Reply #22 on: Thu, 01 December 2011, 22:33:28 »
I'm really interested in the project, but since I don't already have a filco tkl, i'm hesitant to move forward with the thought of having to harvest a filco, or find my own case source.  If someone puts a nifty case together, I may jump off the fence.
Logged
Keyboards:
Filco 104 MX Brown (Otaku) - FKBN104M/NPEK 黒い空
Ducky TKL MX Brown/Blue 80% (White) - 1087-F 白の空
KBC Poker MX Red with PBT Key Caps - PFCN6000

"Consumers use touch screens.  Producers use keyboards."

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Looking for someone who can design a case for the Phantom
« Reply #23 on: Thu, 01 December 2011, 22:38:18 »
Im still looking into using a PLU as it will be significantly cheaper and youll even have some switches you can reuse. This is a great idea but significantly more costly than I had originally thought.
Logged

Offline fireball87

  • Posts: 43
Looking for someone who can design a case for the Phantom
« Reply #24 on: Thu, 01 December 2011, 23:03:12 »
That cardboard case makes me want to do a keyboard based upon danbo. (http://www.flickr.com/photos/roberthannink/5739770461/in/photostream)

Seeing as cardboard is actually pretty resilient except for water, it should actually hold up fairly decently.  Now if only WASD had light brown keys to etch for me, then my pocket would have way too much trouble containing my money.
Logged

Offline litster

  • Posts: 2890
  • rare caps?! THAT'S A SMILIN
Looking for someone who can design a case for the Phantom
« Reply #25 on: Thu, 01 December 2011, 23:27:56 »
The more I look at the acrylic case, the more I think it looks weird.  Then I realized because it is so flat, and the front is so high comparing to the actual Filco case.



I don't like it!!!!
Logged

Offline digitalleftovers

  • Posts: 645
Looking for someone who can design a case for the Phantom
« Reply #26 on: Fri, 02 December 2011, 02:33:08 »
Quote from: litster;462553
The more I look at the acrylic case, the more I think it looks weird.  Then I realized because it is so flat, and the front is so high comparing to the actual Filco case.

Show Image


I don't like it!!!!

Well, I think its pretty awesome.  It is an ACRYLIC CASE!  But, I can see what you mean about the height.  I don't think I would want to use a keyboard with a front that high.  Not without a pretty big palm rest and some chair adjustments.
Logged
Keyboards:
Filco 104 MX Brown (Otaku) - FKBN104M/NPEK 黒い空
Ducky TKL MX Brown/Blue 80% (White) - 1087-F 白の空
KBC Poker MX Red with PBT Key Caps - PFCN6000

"Consumers use touch screens.  Producers use keyboards."

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Looking for someone who can design a case for the Phantom
« Reply #27 on: Fri, 02 December 2011, 04:25:01 »
I think they are trying to work some of the problems out right now in the Phantom Group buy thread
Logged

Offline TheProfosist

  • Thread Starter
  • Posts: 3671
  • Location: Wisconsin, USA
  • Custom Layouts Only!
Looking for someone who can design a case for the Phantom
« Reply #28 on: Sun, 15 January 2012, 18:26:18 »
case has been designed by lister
Logged
Pages:  [1]     Go Up
« previous next »