F/S Custom Mouse Pad: 9.25" x 7.75" rectangular mouse pad

[treble318]

Hi Folks,

Wanted to see if there are any interest in custom mouse pads.  Nothing too hi tec or ground breaking but simply put, nice clean customized mouse pads for anyone that is intrested in being different / unique at the price of $5.50 each which includes shipping world wide.  Any image will be imprinted on the mouse pad, make sure the image is at least 950x800 pixels.  Images that are smaller can be enlarged at the expense of clarity, sharpness.  

Send the images to treble318@yahoo.com, I will customize the image into a mouse pad template and send over a proof for your revision before we proceed with the order if the interest is generated.  

Description:
•9.25" x 7.75" rectangular mouse pad
•Ergonomically correct in thickness 1/8"
•Durable heat-resistant polyester fabric top
•Non-slip neoprene rubber back
•Machine washable and will not discolor or fade


Shipping Terms:
Note since these mouse pads are custom made to order they take 3 days to create and another 8-12 buiness days to ship world wide from Hong Kong Post.  So, please be patient.  If there are any issues contact me immediately and I wiill make sure they are resolved in the uttermost proper manner.  

You can reference cast_off28 on ebay for variety of designs available.

Paypal payment address: treble318@yahoo.com

P/M if you have any questions!

[bazemk1979]

this would be easy fix for people who just got a good deal on TG3 82BL keyboard, its small board but dont come with rubber feet and can slide around the table, so this is a one fix or getting self sticky rubber pads. If you got any pic post it please,thanks.

[boost]

Can you do one of my avatar

Sent from my PC36100 using Tapatalk

[keyboardnoob]

can you make bigger custom mousepads ?

[treble318]

Hi Boost,

I sure can, do you have a larger image file of your avatar?   Your avatar is very small =)  It will look like a dwarf on the 9.25" x 7.75" Mouse pad.  

Regards,
treble318

[treble318]

Hi keyboardnoob,

Unfortunately we do not =(,  the largest size we have is 9.25" x 7.75", we hope to make larger ones in the future but there is not enough demand currenlty for us to make it worth wild for us to create larger mouse pads.  

Thanks for the interest!

Regards,
treble318

[tsangan]

can you make bigger custom mousepads ?

Get a game playmat, 24"x14"x1/16"

I got tons of those I use it under my keyboard and to the right is my Steelseries mousepad, if you really want just that one mat is enough for the keyboard and mice.

[keyboardnoob]

Get a game playmat, 24"x14"x1/16"

I got tons of those I use it under my keyboard and to the right is my Steelseries mousepad, if you really want just that one mat is enough for the keyboard and mice.

I'm worried that the traction might not be optimal with my mouse tho :S..

[tsangan]

I know a ton of people use it even when they play COD and WoW.

I use it just as a keyboard mat and on the right side is my SteelSeries QCK Mass

[Reptile]

I'm worried that the traction might not be optimal with my mouse tho :S..

Not trying to thread jack but I just got this guy and it is plenty big for my needs


http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=120851707219

Also I paid close to $50 shipped for it since it was from UK :-(

[keyboardnoob]

Not trying to thread jack but I just got this guy and it is plenty big for my needs

Show Image

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=120851707219

Also I paid close to $50 shipped for it since it was from UK :-(

That looks very nice, but that's way over my mouse pad budget :p.

[treble318]

That looks very nice, but that's way over my mouse pad budget .

Holy mother of @#* that's huge =) Keyboardnoob, yes time are tough I do understand.  How about this, send me a image to treble318@yahoo.com. I'll shoot you over a proof and send you a free mouse pad for you to review.  All I ask is that you post up your honest thoughts and opinions about the mouse pad and post a picture or two if that's within reason so others' have and idea of what is being offered.

:dance:

[tsangan]

Holy mother of @#* that's huge =) Keyboardnoob, yes time are tough I do understand.  How about this, send me a image to treble318@yahoo.com. I'll shoot you over a proof and send you a free mouse pad for you to review.  All I ask is that you post up your honest thoughts and opinions about the mouse pad and post a picture or two if that's within reason so others' have and idea of what is being offered.

:dance:

Sounds like a deal Keyboardnoob, better jump on that!

[DanGWanG]

Hey I'll take a couple.  I'll send over some pics soon.

Can we send pics of naked chicks?

[demik]

Hey I'll take a couple.  I'll send over some pics soon.

Can we send pics of naked chicks?

is there any other pic that should be on a custom mouse pads?

[treble318]

Sounds like a deal Keyboardnoob, better jump on that!

How naked are we talking about, some hard core stuff X_X  I can try and see what happens. No harm in trying right? LOL Business is business as long as it doesn't offend certain entities / people.  We strive to be PC!

[DanGWanG]

Hardcore would be weird if someone saw it...people would look at me awkwardly and say "wow dude..." But I wanted one with a really hot elegant naked girl that people will say, "nice dude..."

[treble318]

Hey I'll take a couple.  I'll send over some pics soon.

Can we send pics of naked chicks?

How naked are we talking about, teasing.. or hard core X_X...... No harm in trying as long as you are not offendiing anyone at home or anyone that is around you, but then again that would be your problem :fish: If it doesn't fly I will let you know and refund in full if you do decide to proceed with the order after I send you the proofs.

[demik]

Hardcore would be weird if someone saw it...people would look at me awkwardly and say "wow dude..." But I wanted one with a really hot elegant naked girl that people will say, "nice dude..."

let us be the judge :tongue1:

[treble318]

Hardcore would be weird if someone saw it...people would look at me awkwardly and say "wow dude..." But I wanted one with a really hot elegant naked girl that people will say, "nice dude..."

to each their own, some people like to be "bold."  Make sure the images are 950x800 pixels at least if possible please, just to reiterate.

[keyboardnoob]

Holy mother of @#* that's huge =) Keyboardnoob, yes time are tough I do understand.  How about this, send me a image to treble318@yahoo.com. I'll shoot you over a proof and send you a free mouse pad for you to review.  All I ask is that you post up your honest thoughts and opinions about the mouse pad and post a picture or two if that's within reason so others' have and idea of what is being offered.

:dance:

That sounds awesome, pming you right away !

[IvanIvanovich]

What quality are we talking about? Is it nice and high quality image print like 300dpi or ? I've had some made up in the past from some place, and they came out terrible looking because the print was too low quality and I did supply a 300dpi image. I understand cloth has some limitation opposed to paper, but those were just heinous. Also what is the weave like on the top surface? Is it tight and smooth, or more textured like a run of the mill office supply mat?

[metafour]

Hi keyboardnoob,

Unfortunately we do not =(,  the largest size we have is 9.25" x 7.75", we hope to make larger ones in the future but there is not enough demand currenlty for us to make it worth wild for us to create larger mouse pads.  

Thanks for the interest!

Regards,
treble318

As soon as you can make them in a larger size let us know. Unfortunately the current size is too small for me to even use as a keyboard mat.

[treble318]

What quality are we talking about? Is it nice and high quality image print like 300dpi or ? I've had some made up in the past from some place, and they came out terrible looking because the print was too low quality and I did supply a 300dpi image. I understand cloth has some limitation opposed to paper, but those were just heinous. Also what is the weave like on the top surface? Is it tight and smooth, or more textured like a run of the mill office supply mat?

It is considered high quality prints, though lately I've noticed some quailty issues. For instance the color running out and blacks fading, not as black as it should be mixed up images, mouse pads being swapped, etc.  That is not the problem of the customer but rather the company and therefore I honor full refunds if the customer is not happy or we send another free of charge.  We ask for 950x800 Pixels because we want to use that native resolution/size to imprint on the mouse pad to preserve the acutal size of print which is 9.25" x 7.75".  The cloth is finely weaved much like fine polyester cloth which is smooth.  A good exmaple is the Fellowes microban cloth cover the use on the wrist support pads.  Material is close to that at best if that can describe what it resembles.

100% satisfaction!  If you aren't satisfied I can refund you in full.  My success runs off of word of mouth from individuals like yourself.  As noted before, quality issues are still there but I try my best to make things right =) Thanks for your interest! Should you have any other questions feel free to ask them!

[treble318]

What quality are we talking about? Is it nice and high quality image print like 300dpi or ? I've had some made up in the past from some place, and they came out terrible looking because the print was too low quality and I did supply a 300dpi image. I understand cloth has some limitation opposed to paper, but those were just heinous. Also what is the weave like on the top surface? Is it tight and smooth, or more textured like a run of the mill office supply mat?

Definitely, are you a low dps mouse user? Personally I forced myself to play at a higher DPS , reduce strain on the hands and wrist and therefore I don't even use 1/2 of the Razer Destructor mouse pad I have =) By the way that is not a selling point nor a plug, just facts :caked:

[treble318]

What quality are we talking about? Is it nice and high quality image print like 300dpi or ? I've had some made up in the past from some place, and they came out terrible looking because the print was too low quality and I did supply a 300dpi image. I understand cloth has some limitation opposed to paper, but those were just heinous. Also what is the weave like on the top surface? Is it tight and smooth, or more textured like a run of the mill office supply mat?

Definitely, are you a low dps mouse user? Personally I forced myself to play at a higher DPS , reduce strain on the hands and wrist and therefore I don't even use 1/2 of the Razer Destructor mouse pad I have =) By the way that is not a selling point nor a plug, just facts

[treble318]

As soon as you can make them in a larger size let us know. Unfortunately the current size is too small for me to even use as a keyboard mat.

Definitely, are you a low dps mouse user? Personally I forced myself to play at a higher DPS , reduce strain on the hands and wrist and therefore I don't even use 1/2 of the Razer Destructor mouse pad I have =) By the way that is not a selling point nor a plug, just facts

[metafour]

Definitely, are you a low dps mouse user? Personally I forced myself to play at a higher DPS , reduce strain on the hands and wrist and therefore I don't even use 1/2 of the Razer Destructor mouse pad I have =) By the way that is not a selling point nor a plug, just facts

No, I have my mouse's hardware DPI setting on max all the time. I have a QCK+ mousepad now though and I like it for setting electronics on in the unused space. Ideally I would like one sized like the razor goliathus extended or similar. I wouldn't need a hugh print on it. If you could print on one end of it or even get it in blank black that would work for me.

[NguyenAdam]

If you can get it similar to the QCK, then we have ourselves a deal!

[treble318]

If we ever decided to make larger mouse pads you guys will be the first to know! :nod:

[naranja]

Where did you get your keycaps?

Not trying to thread jack but I just got this guy and it is plenty big for my needs

Show Image

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=120851707219

Also I paid close to $50 shipped for it since it was from UK :-(

[Reptile]

Where did you get your keycaps?

Cherry doubleshots + moogle

[DanGWanG]

Sent along a PM and email!

[IvanIvanovich]

Sounds reasonable... now to decide on which image... Are logos and stuff any problem?

[DanGWanG]

Fast service, he sent me proofs really fast.

[ Attachment Invalid Or Does Not Exist ] 39534[/ATTACH] [ Attachment Invalid Or Does Not Exist ] 39535[/ATTACH]

[treble318]

Sounds reasonable... now to decide on which image... Are logos and stuff any problem?

Hi Lysol,

It shouldn't be but if a problem does come through down management I will be sure to let you know and refund you immediately.  I know ebay is pretty strict with logos but outside of ebay I think it's a bit eaiser to get around those underlining issues.

[treble318]

Can you do one of my avatar

Sent from my PC36100 using Tapatalk

Hi Boost,

Just sent you an email on the proof of your avatar, let me know what you think!   Also see attached below for quick reference :wave:

[ Attachment Invalid Or Does Not Exist ] 39568[/ATTACH]

[bazemk1979]

Seller was nice enough to send test bunny to me since I was the one who replied first to his thread, I'll be writing a review once when I receive the pad. So far that I have seen in his store pads look really nice with tons of options for imprint and price seems reasonable.

[Kisakuku]

Seller was nice enough to send test bunny to me since I was the one who replied first to his thread, I'll be writing a review once when I receive the pad. So far that I have seen in his store pads look really nice with tons of options for imprint and price seems reasonable.

Is there an option to purchase  just the test bunny without the mouse pad?

[DanGWanG]

Seller was nice enough to send test bunny to me since I was the one who replied first to his thread, I'll be writing a review once when I receive the pad. So far that I have seen in his store pads look really nice with tons of options for imprint and price seems reasonable.

Don't think you can get a better deal for customized mouse pads for $5.50 shipped to your door!

[boost]

Hi Boost,

Just sent you an email on the proof of your avatar, let me know what you think!   Also see attached below for quick reference :wave:

(Attachment Link) 39568[/ATTACH]

****ing epic, I emailed you a slight change

Don't think you can get a better deal for customized mouse pads for $5.50 shipped to your door!

Def can't get a better deal than this


Sent from my PC36100 using Tapatalk

[treble318]

****ing epic, I emailed you a slight change





Def can't get a better deal than this


Sent from my PC36100 using Tapatalk

BBBBBBBoooOOOOOoost Baby! !! Thanks for your support :target:

[ Attachment Invalid Or Does Not Exist ] 39574[/ATTACH]

[metafour]

Can you do one with the following image in the lower right corner in light blue on a black mousepad?

[ Attachment Invalid Or Does Not Exist ] 39575[/ATTACH]

[treble318]

Can you do one with the following image in the lower right corner in light blue on a black mousepad?

(Attachment Link) 39575[/ATTACH]

Would you happen to have a larger image of your avatar? When I enlarge the image it gets extremely pixelated and the words are hard to read =/ Boost was easier to do becuase it was a drawing , line art.  So you wanted light blue image on a sold black background? That will be pretty difficult to do , lol not to mention pretty time consuming.  It will require refilling manually pixels to acheieve the look and feel you need.  If you have a higher quality image that would help greatly.

[metafour]

Would you happen to have a larger image of your avatar? When I enlarge the image it gets extremely pixelated and the words are hard to read =/ Boost was easier to do becuase it was a drawing , line art.  So you wanted light blue image on a sold black background? That will be pretty difficult to do , lol not to mention pretty time consuming.  It will require refilling manually pixels to acheieve the look and feel you need.  If you have a higher quality image that would help greatly.

I have an SVG I just couldn't upload it to use as an example. And I just realized I wasn't real clear about my intentions in the original post. I was more concerned with whether you can print just in the lower right corner as opposed to scaling the image to cover the whole pad or resizing the image until it reaches the limit of one of the dimensions.

So my idea is more like this but without the white background, I just made it as a quick and dirty mockup.

[ Attachment Invalid Or Does Not Exist ] 39579[/ATTACH]

[boost]

BBBBBBBoooOOOOOoost Baby! !! Thanks for your support :target:

(Attachment Link) 39574[/ATTACH]

NP. cant wait to get this

[treble318]

I have an SVG I just couldn't upload it to use as an example. And I just realized I wasn't real clear about my intentions in the original post. I was more concerned with whether you can print just in the lower right corner as opposed to scaling the image to cover the whole pad or resizing the image until it reaches the limit of one of the dimensions.

So my idea is more like this but without the white background, I just made it as a quick and dirty mockup.

(Attachment Link) 39579[/ATTACH]

Thanks for clarifying, my only concern there is the color contrast.  The logo you have is already dark, so it will be very hard to read if you had that over black.  I tried blending the dark blue and black color and the words aren't evel ligible due to the similarity in darkness.   I would recommend you stick witih white as it sticks more with your logo, even then the logo is dinky in comparison to the full size of the mouse pad. The quick mock up you did was having the logo blown up. In actuality, to acheive to coverage the image will have to be amplified which will result in a distroted image.

I would recommend you stay with white as it pops more with the color contrast, however the logo is still too small :Cry:

[treble318]

Thanks for clarifying, my only concern there is the color contrast.  The logo you have is already dark, so it will be very hard to read if you had that over black.  I tried blending the dark blue and black color and the words aren't evel ligible due to the similarity in darkness.   I would recommend you stick witih white as it sticks more with your logo, even then the logo is dinky in comparison to the full size of the mouse pad. The quick mock up you did was having the logo blown up. In actuality, to acheive to coverage the image will have to be amplified which will result in a distroted image.

I would recommend you stay with white as it pops more with the color contrast, however the logo is still too small :Cry:

Okay so this is what I determined looks the best in an attempt to preserve the text and image.  Let me know what you think! [ Attachment Invalid Or Does Not Exist ] 39586[/ATTACH]

[treble318]

Okay so this is what I determined looks the best in an attempt to preserve the text and image.  Let me know what you think! (Attachment Link) 39586[/ATTACH]

Redone!! Centered is better yes? what are you thoughts? [ Attachment Invalid Or Does Not Exist ] 39592[/ATTACH]

[metafour]

I like it in the corner.