« previous next »
Pages:  [1]     Go Down

Author Topic: One switch on Filco is not working  (Read 1405 times)

0 Members and 1 Guest are viewing this topic.

Offline Overpowered

  • Thread Starter
  • Posts: 2
One switch on Filco is not working
« on: Tue, 28 August 2012, 14:06:34 »
Hello guys, long time lurker, first time poster  :)

About week ago, my "3" key (not the one on the numpad, but the one above W and E keys) on my Filco Majestouch2-104key (bought from keyboardco) sometimes didnt register the keystroke and I had to repeat it. It usually worked on the second attempt so I thought its no big deal. But today I pressed it, nothing happened, then I pressed it to the end (no big force, normally) and since then its not registering the keystroke at all. It feels like it doesnt go all the way down compared to other keys, but its very very slight difference. Also it sounds little bit higher, again, very slight difference, doesnt have to mean anything. I suspect its some dirt though. I dont know if there is a way to open the switch without desoldering on plate-mounted switches, but I assume there is not.

So obviously I need to change and/or clean the switch...
Problem 1 - I have never soldered/desoldered, do not know how to do it and have no equipment to do it. I am also not very manually skilled so I would be worried as I could damage the keyboard with my luck... :-[
Problem 2 - the warranty from keyboardco is most likely over, as I bought it in early 2011 and on their website they say warranty is for 1 year

The best solution for me would be to send it somewhere to repair it, but I have no idea where to and as I live in Czech republic, it can get quite expensive if its outside continental Europe.

So, what to do?

Thanks for reading!
Logged

Offline Overpowered

  • Thread Starter
  • Posts: 2
Re: One switch on Filco is not working
« Reply #1 on: Wed, 29 August 2012, 07:16:26 »
I wrote email to keyboardco and supposedly they are not able to help at all since their tech guy is on vacation, so you guys are my only hope  :-[
Logged

Offline Alessandro

  • * Vendor
  • Posts: 1120
  • Location: Lancashire, England
  • The Price Is Right
    • Alessandro's Sweet Shop
Re: One switch on Filco is not working
« Reply #2 on: Wed, 29 August 2012, 07:19:14 »
There are plenty of tutorials on removing switches, just find some of those and you should be ok. Just make sure you do your research into how to do it properly and you'll be fine!
Logged
KBC Poker | MX Reds | Beige Doubleshots
Goldtouch 10Key Pad | MX Browns | Beige Doubleshots
IBM Model M-122 Terminal (Bolt modded) | Buckling Springs | Beige Dyesubs

Alessandro's Sweet Shop- "I never said they were art."

Offline PointyFox

  • Posts: 1193
Re: One switch on Filco is not working
« Reply #3 on: Wed, 29 August 2012, 19:39:10 »
Soldering irons are very useful.  Once I saw a guy fix his soldering iron with the same one he was using.  Don't try it at home.
Logged

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
Re: One switch on Filco is not working
« Reply #4 on: Wed, 29 August 2012, 20:04:10 »
Logged
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline mbc

  • Posts: 469
  • Location: Germany
  • -delete-
AW: Re: One switch on Filco is not working
« Reply #5 on: Wed, 29 August 2012, 21:53:51 »
Quote from: Overpowered on Tue, 28 August 2012, 14:06:34
The best solution for me would be to send it somewhere to repair it, but I have no idea where to and as I live in Czech republic, it can get quite expensive if its outside continental Europe.

So, what to do?

Thanks for reading!
You can ask over at deskthority.net, there are plenty eu ppl there, that can solder
Logged
Pages:  [1]     Go Up
« previous next »